QuickSilver 867 G4 with default ADC and Dell 1704FPT LCD DVI

I finally have a digital LCD to use with my Quicksilver 867 Mhz G4, thanks to a package deal with Dell.
But I wonder if my Mac's build-in ADC support can drive the DVI input of the Dell 1704FPT LCD, with Apple's ADC to DVI adapter, or if I need to get a DVI video card for this purpose. I plan to run at a 1280 by 1024 resoultion.
For that matter, I have a DVI switchbox and Sony 19" DVI digital LCD in use with my PC's and Mac mini. Would the build-in ADC support that as well with the adapter?
Thanks for our input.

Update: Here are the specifics on my card and monitor. I note no core image support.
I'd really appreciate feedback on whether I can use this card for DVI output to my LDC monitor.
Thanks.
NVIDIA GeForce2 MX:
Chipset Model: GeForce2 MX
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 32 MB
Vendor: nVIDIA (0x10de)
Device ID: 0x0110
Revision ID: 0x00a1
ROM Revision: 1049
Displays:
DELL 1704FPT:
Resolution: 1280 x 1024 @ 75 Hz
Depth: 32-bit Color
Core Image: Not Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported

Similar Messages

  • I want to set a variable with default value and can be changed by the user

    hi,
    i want to set a variable with default value and can be changed by the user, so i new a variable with setting : customer exit, single value, optional, ready for input.
    in my customer exit code, i set a default value, eg. 20070530
    when the variable screen popup, it display the default value 20070530, i changed it to 20070529, but it doesn't work , it still display the data in 20070530, how can i solve this problem? 
    your help is appreciated.

    Liu,
       As mentioned by Anil, you need to restrict your customerr Exit code to I_STEP = 1.
    or.
       <u>Open your Variable in change mode, in the Last Page os the Variable Maintenance you can provide default value. Note: you are doing same thing in Customer Exit. In your case no need of Customer Exit.</u>
    Nagesh Ganisetti.
    Assign points if it helps.

  • Printer issue with 10.6 and Dell All in One 968W

    The Dell All in One 968W is basically a Lexmark 9500 series with a Dell badge. Dell do not support OSX but Lexmark have previously supplied a driver that works and allows me to print on the Dell printer.
    However with 10.6 OSX will no longer support the Dell printer. I have tried using the supplied Lexamrk 9500 series dirvers with no luck, and I have tried going to back to the older Lexamrk dirver. The error message suggests that I need to get an updated driver from Lexmark. Lexamark do no yet provide this.
    Has anyone found a solution to this problem?

    Hi
    Have you find any solution????
    Lexmark has a lastest driver the 9500SeriesWebInstaller1.0.1.dmg released the 09/15/09 but it doesn't detects the printer
    if we delete the default snow leopard driver for lexmark and install this new????

  • Setting up new printer with MacBook Pro AND Dell?

    Need a printer, want an AIO, any work better than others with MacBook and Dell?  Purchased a HP Officejet 6500A Plus, any problems using both systems togehter?  Also, should I set up the Dell first then the Mac, or viceversa?

    Thanks for the help, I'm definitely getting there
    I changed the settings as you've described and can now print from my MBP. The 3 Dell laptops are another matter. Would you have any idea what the IP address of the printer would be? Or the AirPort Extreme? I'm following this tutorial:
    http://www.ifelix.co.uk/tech/1004.html
    without much success but I'm really guessing at the IP address. I've tried 192.168.1.1 (my router) and 192.168.1.101 (the IPv4 address) with no luck. I suspect it's the IP address that's the problem ...
    Any thoughts?
    Thanks
    Jay

  • Log in with default username and password

    Is there a way to create a pdf so that it automatically logs in with a default username and password so that the user is not prompted upon opening?

    No, there is no way set a default user name and password, but as an alternative you can set your policy to be "Anonymous Access", meaning that there is no authentication (of the user) required to open the document, but you can still control (i.e. prevent printing) what the "anonymous" user can do to\with the document.
    Regards
    Steve

  • Initializu00EDng select options field with default values and with NO INTERVALS

    Dear All,
    I have used WDR_SELECT_OPTIONS technology within WD Abap.
    I also have added the fields which have to be taken into consideration.
    lt_range_table =
    wd_this->m_handler->create_range_table(
    i_typename = 'PLANT' ).
    wd_this->m_handler->add_selection_field(
    i_id = 'PLANT'
    it_result = lt_range_table
    i_read_only = read_only ).
    Can I assign two values to this field 'PLANT' whereby the user may take only these values.
    I mean kind of pre initializíng of this select options field with default values.
    Due to this handling it should be prevented that the user can give other values
    except this values.
    Additonally it should be fine whether it is possible to disable the second input field
    of this select options field like NO INTERVALS .
    Regard
    sas
    Regard
    sas

    wd_this->m_handler->add_selection_field(
    i_id = 'PLANT'
    it_result = lt_range_table
    I_NO_INTERVALS = 'X'
    i_read_only = read_only ).
    Pls check 'WDR_TEST_SELECT_OPTIONS' web dynpro component

  • ORA-01400 - not null column with default value and item with authorization

    I've searched - I would think someone has run into this. APEX 3.0.0.00.20 - I've created a simple form on a table. One of the column is a not null column with a default value. I have a select list on that item, but it has security on it - authorization scheme. So, it checks the user and if that user isn't of the right role, it will not even display that item. However, APEX appears to still send in the column in its sql! So, the default value is useless, it sends in null each time. Even if I set the default at the Item level, I get null. Argg. That's got to be a bug...
    In debug, I do not see the item listed at all. It's not used. That's fine - but why is it trying to insert the value? I would think it would leave it off??? I think because the item is associated with a database column. But, getting around this is ugly. Having to create a hidden item for each one, and then check to see if I need to take the list value... horrible. Any way to get around this???

    I should add - I guess I can always put my own custom process in to replace the DML. Just seems like a simple thing - if the value doesn't appear on the debug, isn't set with any default value... don't include it in the DML.

  • Pink Screen with 17" ADC and DVI converter

    This issue could be with the Apple ADC to DVI convertor box or cable, but I can't confirm if it is that or my monitor. I am using a 17" clear ACD with a mac mini, and I started to get intermittant bright pink screens, which has progressed into pink all the time, and a horizontally squashed screen that shows the desktop twice (one on top of the other, both squashed).
    I am pretty sure that the cable coming out of the convertor box is the culprit, since I was able to get it working normally by jiggling the cable, and it started acting up when I was plugging and unplugging some USB devices. Now it won't work properly at all, and I do not have an old computer to plug the monitor in directly to check with. I did plug the monitor and convertor into a G5 PowerMac, and had the same result. When I plugged in a newer 20" Apple aluminum display into the Mini, it worked fine.
    The trouble is that all of the cables on the monitor and convertors are built in and not easily replaced.
    Any suggestions?

    I bought a new ADC/DVI converter ($99) and that fixed it. I am almost positive it was only the cable.
    My question is: why can't Apple PLEASE make these convertor boxes AND their monitors with removable/replaceable cables?
    I ended up spending 10 times what I should have to fix the issue. it should have never broken in the first place, since it rarely even ever got touched, and had never been disconnected.
    Just for grins, after I bought the new converter, I tried to open the old one to see if I could remove the cable. I could not even get the box open without destroying it.
    My 20" Cinema Display has a dead bug inside it, and it is also impossible to open up without destroying it, just to clean it.
    I just have to express my displeasure at Apple making their products non-servicable. What a waste.

  • MBA with 10.8 and Dell Projector 3200mp

    Hi,
    My boss has a Macbook Air (purchased Jan 2013) with OS X (10.8) and an old Dell 3200MP projector and tried connecting via VGA cable with adapter for MiniDisplay. I'm not sure exactly what happened next, but the short story is that it didn't work so she had to use an older MacBook Pro (also with upgraded OS 10.8), which worked perfectly.
    Does the Air not work with this 10 year projector?
    Should I be using an HDMI cable or something?
    Would appreciate any information that you can share.
    Thanks!!

    Hello, UsabilityMatters.
    The following article has a few things that you may try in order to get the MacBook Air working with the projector in question.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Best regards,
    Allen

  • Wireless print server with Mac G4 and Dell PC's

    I have a belkin wireless router and a linksys WPS54G print server. Hardwired by ethernet cables to the router are two computers 1) Dell 2400 and 2) Apple G4.
    I am trying to get the Apple to print to the printserver. the linksys software set the Dell up and the print server and they work fine. I have tried everything i can on the Apple but no luck. Seems to be the driver. The printer is printing gibberish from the mac. The printer is an Epson Stylus Photo R320. I dowmloaded the drivers for Mac OS 10.4.4... from the epson website - I chose each one for the printer on my MAC and tried to print. The result was either no print out or differing gibberish each time. What can I do?

    Please search this forum. Your precise issue has been covered several times. You have to use a CUPS driver for network printing - Epson's drivers are Carbon, not CUPS. Start by updating the Gimp-Print drivers that Apple included in OS X to the next newer version, now called Gutenprint 5.0.0:
    http://sourceforge.net/project/showfiles.php?group_id=1537

  • Compiler error with default arguments and static template function

    Hi 
    The following does not compile with visual studio 2010 sp1, and compiles with gcc.
    #include <string>
    class A
    public:
       template<class T>
       static T& Get(const std::wstring&);
    class B
     public:
      void f(
        double d,
        double c =A::Get<double>(L"test"));
    int main()
        B b;
        b.f(5);
    It gives me the following error 
    error C2783: 'T & A::Get(const wchar_t *)' : could not deduce template argument for 'T'
    If I change Get to be global function and not static function of A, it compiles.

    It seems to be a compiler bug.  It fails in VS2012, but compiles in VS2013.
    For completion sake, the problem exists if A is a namespace containing Get.  But not if Get is global.
    The only solutions I can see are try to workaround the problem (make Get global) or upgrade to a newer version of VS.

  • Scanning Problem with Mavericks, CS3, and Dell 2155cn

    New MB Pro running Mavericks.  Adobe CS3 loaded.  Acrobat Pro will print to network Dell 2155CN, but will not scan.  Same installation on older MBP running Lion scans from Acrobat with no problem.  Does Mavericks have a problem with the Dell driver?S

    Might be the driver. I don't see a Mavericks compatible driver > http://ftp.dell.com/Pages/Drivers/dell-2155cn-cdn.html
    It just says Mac OS X. That's rather vague.
    Try this workaround.
    Image Capture can scan for you. It's in your Applications folder.
    Mac Basics: Using a scanner

  • Syncing problems with iphone 3g and dell computer

    Whenever I connect my iphone to my computer, it recognizes it as a camera, not as a phone, and it asks me if I want to use microsoft word or another random program to see photos. itunes doesn't recognize it at all. How do I get itunes to recognize it?

    A couple of things that might help out.
    Open computer management by clicking on start and right clicking on my computer, then choose manage.
    When the computer management window opens, expand services and applications on the left.
    Click on services and see if Apple Mobile Device is running on the right.
    If it is not running, or is not set to automatic, try starting it.
    Also if apple mobile devise is not installed or will not start, this article might help out uninstalling and reinstalling itunes.
    http://support.apple.com/kb/HT1926?viewlocale=en_US
    If the apple mobile device is installed and will just not start, try uninstalling your security software.
    Once uninstalled, restart your computer.
    Once the computer is restarted, open computer management to see if apple mobile device will start.
    Hope this helps.

  • IPad Camera Kit and Dell SX2210 LCD monitor

    My Dell SX2210 has a built in 3.2 megapixel camera built into the monitor. Any chance if I buy the iPad camera kit and plug it into my iPad the plug and play might work? I have read on forums that some users have success with this monitor's camera on MacBook Pros and Mac minis.
    Any idea if this setup might work?

    I am not sure but I think not.
    The camera connection kit seems to look for image files in a camera type directory structure.
    The monitor camera probably outputs a live video feed. Is this correct?

  • Everybody with N81 8gb and Firmware 21.0.008

    Yesterday I restore my nokia with default settings and what to see. All, or that i know about, bugs are disappear. When start GPS there isn't System Error. And my sound is like it back powerfull.
    I don't know but I hope that will work with you.
    Try...
    Interesting is that one or two week after this firmware was out, nokia removed 21.0.008 and return to 11.0.045.
    I don't know but I'm pleased to see my phone work properly.

    For sure, the multitouch is not yet implemented, even in the V30 firmware.
    Quickoffice should be in the Office folder, but the V21 has an old version, the new one is on the V30.

Maybe you are looking for