Quicktime .mov files opens up Safari during video

I have this .mov quicktime file, i can watch it but every few seconds and when it first opens up safari starts up and each time it creats a new window. Is there any way i can stop this?

Steven, I'd suggest you try posting in the QuickTime for Mac forum. You'll be more likely to get help there than you will here in the QuickTime for Windows forum.
Good luck.

Similar Messages

  • Quicktime Movies that Open in Safari eat up hard drive space. Howto Delete?

    I have a Mac Book Pro. The hard drive space is minimal as you probably know. Whenever I open up a Quicktime Movie in Safari the movie will open in a new Safari window. Some of the movies are rather large trailers and what not. I notice that my hard drive space goes down with each movie I open. Where are these movies saved? How do i clear up this space after i'm done watching? I hate needing to delete other stuff to open up quicktime movies.

    If you've set the cache to 100 MB's that all QuickTime will use.
    You're going to have much bigger issues with such little free space on your drive. Why not buy a cheap external drive and move large folders like Music, Movies and Pictures to it.
    iTunes, iPhoto and iMovie can all store their files on external drives.

  • Quicktime .MOV file plays audio only - no video

    Okay, here goes...
    I created a .MOV file from Avid via the H.264 codec. This file contains video and audio and was made on a Mac using Leopard. I played it back successfully on that machine.
    I then copied it to a data DVD and put it on my XP PC with all OS software up to date. I have a freshly updated QT 7.6 install. The files will only play back audio on my PC - video appears black (if preferences are set to Direct X) or white (if preferences are set to safe mode). Video card is an NVIDIA GeForce 7900 GT/GTO; driver is up to date.
    Anybody have any insight into what I need to do to my PC to get this video to play?

    Thanks for the link. Unfortunately, it doesn't directly address the issue I am having (though it does show me the world of hurt out there when FCP and Avid bump up against each other in the same post process).
    And the third-party page doesn't have any codecs for Avid.
    Again, I am at a loss. I created the QT files from my Avid project on a Mac. The files played back properly on that Mac. They won't play back on my Windows machine, so I can only assume that there's something missing or different between the QT versions for Mac and Windows.
    Since I can't figure out how to get these files to play properly on a PC and since my home machine is a PC, I guess I will not output footage from Avid to a .MOV file in the future. I will try to find a format that Windows Media Player likes, I guess.
    Thanks for the help.

  • Quicktime .MOV files want to be opened by Spotify

    Quicktime .MOV files want to be opened by Spotify
    I right click open with, then select Quicktime, and click always use this or set default or whatever, but that dosent work.
    The video cannot play in Spotify.

    Try right-clicking it, hit Get Info, under 'Open with' select Quicktime (or whatever you want to use), then click Change All...

  • Snow Leopard iTunes 10.5 will not play multiple video tracks in QuickTime .MOV files

    I recently discovered that Snow Leopard iTunes version 10.5 won't play multiple video tracks in a QuickTime .MOV file.
    Both video tracks appear and play correctly when playing the file in:
    - QuickTime Player 10 or QuickTime Player 7.7 on the same Snow Leopard machine
    - iTunes 10.3.1 on another Snow Leopard machine
    - iTunes 10.5 on Leopard or Windows 7
    So I think the problem is iTunes 10.5 on Snow Leopard (although I haven't been able to test iTunes 10.4).
    First test file is two 640x480 video tracks side-by-side (total dimensions 1280x480):
    http://160.94.17.23/demo/two-video-tracks-1280x480.mov
    All I see is the first (left) video track, and not the right one.  iTunes "Get Info" command incorrectly reports the video dimensions of the file as 640x480.
    Second test file is two 640x480 video tracks played one after another (duration of 10 seconds each):
    http://160.94.17.23/demo/two-video-tracks-640x480.mov
    All I see is the first video track, and although it reports the correct file duration (20 seconds), the second video track never appears -- it simply freezes on the final frame of the first video track for the last 10 seconds.
    Anyone else see similar behavior?  Unless I'm missing something, I suppose I should submit this as a bug to Apple.

    I have the same problem, i tried re-installing, converting it to AVC H264 but none seems to work so far

  • Can't open Quicktime .mov file (Error -2048)

    I can't open and run an 11mb QuickTime .mov file that was created, I'm pretty sure, on a Mac. I'm using a PC running QuickTime 7.2. Colleagues using PCs with QuickTime 7.0 and 7.1 can't run it either. The guy who created the file apparently has no problem running it on a Mac. My full error measage is "Error -2048: Coundn't open the file because it is not a file that QuickTime understands". Any ideas anyone?

    Ask the guy that made the file what codecs are used in it. Mac users can open, save and edit .wmv files and he may have put one inside a .mov container. It will never play on a PC unless saved as .wmv extension.

  • No video when playing QuickTime MOV file in iTunes

    I received a QuickTime MOV file from a business associate who transferred it from his Canon Vixia HF10 camcorder to his Mac. When I load up the file in iTunes on my Win XP machine, it will play back the audio, but there is no video. When I try to play it back in QuickTime, a window comes up telling me that additional software is needed. When I click the button to go download the software, a browser window comes up listing about 15 different products -- with no indication of which if any will solve the problem. I don't know for certain that any of them will, and I don't have time to download 15 products to test each one. Is there not a more simple way to find out what I need and where to download it? Alternatively, is there a way to convert this file to a friendlier format? This is video of a business event that we need to edit for distribution.

    Don_McCracken wrote:
    Thanks. That explains it. The person who made the .wmv file says it was made with Camtasia Studio. Do you have any idea what he might have done for it to choose this MSS2 codec over something more universally compatible?
    Camtasia is a screen capture application for Windows (like Snapz Pro for mac). We use it here, it works quite well but you get WMV files and tough darts, I guess if you want other than that. I presume real time capture of activity on the screen calls for a codec simple enough to keep up and not drop frames. It does work quite well though.
    Play it on WMP in Parallels, Boot Camp, etc.

  • Quicktime Movie File/ MPEG-4 Video File

    how come for some of my video podcasts they are in teh MPEG-4 Video file format, while others are in Quicktime Movie File format?
    i was j/w this because i noticed it when i jus recently downloaded new podcasts (it was first time downloading a podcast from iTunes 7.0.2) and i was jus wonderin if there is any way to get it into MPEG-4 Video File....because i already right clicked and went to "convert selection for ipod" but then it says it is already in that format, but it is in Quicktime Movie File....
    any help would be appreciated
    Thanks,
    Brandon

    Quicktime files can be MPEG-4 video, and should be
    transferable to your iPod.
    If you get info on the video file in question what
    does it say?
    when i click get info it says the kind/type is a quicktime movie file.....i was jus mainly wondering why some podcast videos have quicktime video file, while others have the mpeg-4 video file...its almost like and OCD (obssesive complusive disorder) thng for me.....but as long as they can still transfer to the ipod i should be fine....

  • QuickTime Movie Files Won't Convert For iPod using iTunes and QuickTime Pro

    I've got a ton, and I mean a ton of QuickTime movie files of music videos that I want to convert to use on the iPod. I tried using "Convert Selection For iPod" in the Advanced Menu on iTunes, but got the following message trying convert a QuickTime file of U2's Beautiful Day:
    ""Beautiful Day" could not be converted because this file does not allow for saving or conversion."
    I purchased QuickTime Pro hoping that the features on Pro would convert the file. When I opened the same file to convert using QuickTime Pro, "Export" under the file menu was grayed out so I couldn't select it.
    You'd think that an APPLE QuickTime Movie file that can be played on APPLE'S iTunes and APPLE'S QuickTime Player would be able to be converted to be used in APPLE'S iPod player. (Anybody notice how APPLE is capitalized to point out that the the hardware, software and file formats are ALL Apple?)
    Instead I wasted money buying QuickTime Pro when it won't do what I specifically bought it for. Now I have all these QuickTime files which won't play on the iPod.
    Can anybody provide some help or assistance on how to accomplish what I'm trying to accomplish???

    If the file doesn't allow saving or conversions then it is protected by DRM (Fairplay).
    Nothing can help QuickTime Pro convert protected files.

  • How do i export a sequence to an uncompressed quicktime .mov file?

    hello everyone.
    I have a little problem.
    I have a 20 secs sequence that needs to be exported from my FCP 6.0.3 to UNCOMPRESSED quicktime .mov file. Its HDV footage.
    These are the steps I've taken.
    I go to FILE>EXPORT>QUICK TIME MOVIE. I have all the settings to current setting, and I have checked the "Make Movie Self-Contained" option.
    When I'm done exporting, I get a .mov file, but its a Final Cut Pro file, not a quicktime file.
    This means I can't open in a PC, where I have to do some compositing.
    I would really appreciate if anyone can give me some advise or tips on how to get my export .mov file to be a quicktime file uncompressed .
    Thanks
    -r

    The Uncompressed 4:2:2 codecs only come with Final Cut Pro. Two ways:
    1) In FCP, go to File > Export > QuickTime Conversion. Set format to QuickTime Movie and click Options. Go to Settings under Video and set Compression Type to None. Put all the sliders at maximum. Click Ok, deselect Prepare for Internet Streaming and click Ok. Export the file.
    2) This is the one I personally prefer, as it will be compatible with any system, even if they don't have QuickTime. Go to File > Export > QuickTime Conversion. Under Format, select Image Sequence. Go to Options, set Format to TIFF and enter the FPS. Click Export and you will have a series of sequentially-numbered images that most compositing apps will treat like one big movie clip.

  • Quicktime player file open nightmare

    I have several quicktime movie files that were saved on my MacBook prior to the Snow Leopard upgrade as downloaded movies using the old version of QTpro. The MacBook is now running the latest OS. I can still open these files using either the 10.0 player (90.3.1) or the old pro player version 7.6.3 (630) on the MacBook. On my MacPro that shipped with Snow Leopard installed, I cannot open these movie files and get the "the movie is in a format that QT does not understand.." with either version of the player on the MacPro.
    I've tried to save the files as new .mov files on the MacBook, but the MacPro still cannot open them. I need to be able to get these movie files into Keynote on the PowerMac and work with them on the PowerMac. Can anyone suggest how to get past this problem? Could I have some QT component on my MacBook that is missing on the MacPro and if so, how do I find it?
    ...wishing Apple would stop hosing their QTpro customers with every OS upgrade.

    On my MacPro that shipped with Snow Leopard installed, I cannot open these movie files and get the "the movie is in a format that QT does not understand.."
    Sounds as if someone forgot to update their QT component installation on the newer platform. Basically, you need to be sure that both platforms can access the same set of QT components -- i.e., the ones required for the movies in question. In some cases where users have added Snow Leopard after purchase, the components (the QT MPEG-2 Playback component and/or the Perian component package in particular) seem to get "lost" during the new OS installation and may need to be reinstalled to re-link them with the dual 32-/64-bit QT structure. However, in your case, a simple comparison of the QT component folders and/or check of the Inspector/Properties window to see which QT components are causing the problem, should reveal what is going on.
    I've tried to save the files as new .mov files on the MacBook, but the MacPro still cannot open them.
    Saving files to a new/different file does not convert/re-compress the actual data. Instead, it merely re-writes the same compression format(s) to a new MOV file container. E.g., "muxed" MPEG-1, WMV, or H.264/AAC data can be re-wrapped in an new container but would still require their original QT components for proper viewing/conversion.

  • Soundbooth CS4 Problem with Quicktime MOV files

    I know that Soundbooth CS4 should support Quicktime MOV files but I just get a placeholder image and the video doesn't play.  What should I do?  I don't know if it is an issue with Quicktime or with Soundbooth.
    Thanks,
    Bruce

    It's probably an incompatible codec in the QT. If the audio isn't AC3 and on a separate track from the video this can happen. There are still a few applications out there that will write the audio into the video track, and QT will still play it that way.
    Are you attempting to edit video with Soundbooth?
    If you are it's not a good idea.
    You really should be using Premiere or Efter Effects to edit video, and leave Soundbooth for audio work.
    If you have QT Pro, try extracting the audio from the MOV and save THAT as an MOV of just the audio. SB should have no problem opening that/

  • Quicktime .mov files crash multiple applications.

    I've been having issues for some time now with quicktime .mov files hard crashing multiple applications. Basically quicktime movies crash Safari and iWeb/iLife when I try and view them. Quicktime player itself quits occasionally, or just doesnt even play the movie. iWeb will crash as well consistently. Bad thing is, that it's a hard crash for me, and there is never even a box stating that it crashed. So I get no opportunity to send a bug report. The applications just quits instantly. nothing in the crash report either. all other movie formats work fine, ie. mpg, avi, wmv.
    Firefox can view the same movies fine for some reason.
    I can even make a new site in iWeb, add one movie page, drop a movie in, go away from that page creation, then go back to it and the app will crash, with no dialogue boxes whatsoever.
    I've tried tossing all quicktime prefs, going back to QT 7.01 then back up to 7.04, no help. My powerbook works fine, and it's on the same level, all OS updates like my G5. If I bring the iWeb file over to the G5, from the powerbook, that I was having no problem editing on the powerbook, it will crash iWeb immediately upon viewing a page with the movie in it.
    I'm really close to re-installing teh OS completely, but hoping we find a solutin before then.
    I do have a retail Mac Edition Radeon 9800 Pro in this machine, could be issues, but I have found no articles stating such. I also have flip4mac installed. I updated it to the latest, and I do not have any .avi files in my movies folder, so it shoudn't be an issue. This all started happenning around the install of iLife '06 when I first repeatedly noticed it on the movie pages in iWeb. It might have happened earlier, but I wrote it off. It was just really annoying when trying to make iWeb pages with movies.
    PowerMac G5 Dual 2.5   Mac OS X (10.4.5)   QT_7.04, 7gb, 800gb, Radeon 9800, iSight, MyTV.PVR

    1] Try it with another user account (make one if you need to in Apple menu > System Preferences > Accounts)
    2] If its only happening in your account:
    Inside your hard drive, in the Users folder should be your user home folder (with your account name.) Within that folder is a folder called Library... open that and look for a QuickTime folder within, pull that QuickTime folder out to the Desktop. Do the same for Internet Plug-ins and throw away the ~/Library/Caches/QuickTime folder too. Then, open Preferences and pull out com.apple.quicktime... (all of them) and the QuickTime Preferences file.
    Then log out (Apple menu) and back in (or restart) and try again.
    3] If its happening for all users then try:
    Pull the /Library/Preferences/com.apple.quicktime.plist to the desktop (Your QuickTime Pro registration is in that file so don't throw it away, just move it out, restart and try again.)
    4] If there are still problems, try repairing your disk either with the OS X install disc (run Disk Utility from the menu bar) or by rebooting in Singel-User-Mode and running fsck. Then repair permissions with Disk Utility.
    Let us know if you still have trouble.

  • QuickTime movie not opening in QuickTime Player?

    I recorded a video using PhotoBooth which now will not open in any of my players, QuickTime, VLC, HandBrake.
    Finder tells me that it's a QuickTime Movie file, but QuickTime Player says "QuickTime Player can't open "Movie on 4-12-12 at 8.20 PM" because the movie's file format isn't recognized."
    Why won't it open, and how can I get it to open?
    Additionally, I recorded a different video this morning and it plays just fine.

    If a Photo Booth movie is interrupted--by clicking the red "traffic light" button in the upper left corner of the PB window, by putting the Mac to sleep, by a sudden power disruption, etc.--the recording will usually be left in an unfinished, unplayable state.  There is no simple, free fix to create a playable movie from the unrecognized file.  At least two companies offer repair services/software--at a price.  Both offer free diagnostics to learn whether the interrupted movie might be recovered before you think about plunking down your cash.
    http://aeroquartet.com/
    http://www.grauonline.de/cmsimple2_6/en/?Solutions:HD_Video_Repair_Utility

  • Quicktime, Movie File Types & CandyBar

    I have just three questions:
    1) With the new upgrade to OS X Mavericks, it seems as though Quicktime is extra picky about converting certain file types when I open them, particulary avi's......which used to open with no problem in earlier versions of OS X. Is this a quirk that I'm going to have to deal with for now, or is there a codec I can install to rectify this?
    2) When listing different file types in Finder in OS X Mavericks, Windows Media Files (.wmv) are being listed as documents, and not movies (see below) This wasn't the case in OS X Mountain Lion. Is this another quirk or is there something I can do to have the .wmv files listed correctly?
    3) Any word on when CandyBar will be updated for OS X Mavericks? If not, is there another way to change the look of the default folder icon? I already know how to change the icons for specific folders, but CandyBar helped me change the look of the default folder icon, thereby changing the look of ALL folders on my Mac.

    Quicktime files can be MPEG-4 video, and should be
    transferable to your iPod.
    If you get info on the video file in question what
    does it say?
    when i click get info it says the kind/type is a quicktime movie file.....i was jus mainly wondering why some podcast videos have quicktime video file, while others have the mpeg-4 video file...its almost like and OCD (obssesive complusive disorder) thng for me.....but as long as they can still transfer to the ipod i should be fine....

Maybe you are looking for