Quiz Slide - Review Area

Rick,
What is the purpose of the Review area on the quiz slide?
Most of the time, I shrink it very small and out of the way. What
can I use it for?
Angie

Hi there Angie
Just a note here. While I do tend to be prolific with
answering and responding to forum posts, there are many folks here
that help other than me.
As for your question, here is how it works. When you have a
quiz with question slides, you have correct and incorrect answers
for each question. You also have an ability to enable the user to
perform a review of the quiz. So once the questions are finished
and they see the results screen, if you have allowed reviewing,
there should be a button on that slide that allows them to review
the questions. When clicked, they are transported to the first
question. The Review area is where they see the messages pertaining
to the question.
Does that make things clearer? If not, post back with where
things are still hazy and one of us will try to 'splain it better.
Cheers... Rick

Similar Messages

  • Screens are freezing before quiz slides

    Hi,
    I am working with a course where the screen right before a quiz slide will freeze when you click Forward and it won't load the quiz slides. It doesn't happen for every browser, but its happening for the majority (IE 10,9; all versions of Chrome).
    I'm using Captivate 7 on Windows 7 and testing in Chrome 32.
    Has anyone experienced this before? I've never seen this happen.
    Thanks,
    Kristen

    Does anyone else have any thoughts about how this could be happening? I had it happen in another course and the screens only freeze on slides right before quiz slides. Each of those slides happened to have Advanced Actions on them...the actions are there to show/hide smart shapes with text so that it acts as a button.
    Does that create any issues with the freezing?
    The quiz settings are 80% passing grade, they have 2 attempts for each quiz slide, they are only multiple choice questions, they get 10 points for correct answers...what other settings do you need to know?
    The screens are only freezing in IE10, Chrome 31, Chrome 23, and Chrome 17. It doesn't seem to be happening in IE 11, Chrome 32, or Safari. Could the older browsers be creating a problem? Or our SWF output? We're setting it at Flash Player 10.
    Thanks for any help. I can't figure this one out...
    Kristen

  • All Quiz Slides Automatically Changed (by captivate) when ANY change is made to a Quiz Slide

    When I make a change to a quiz slide, captivate automatically adds the "Back" button (which was previously deleted) to *all* quiz slides and extends *all* quiz slide length by several seconds. This is very frustrating to have to go back to every quiz slide (which are interspersed thought the project) to remove the "back" button and correct the slide length. Thoughts anyone?

    Did you read that blog post that I indicated in the other thread about questions?
    Default pausing point is at 1.5 secs. If you leave the Success/Last attempt action to default 'Continue' users have to wait 1.5secs, never 3 secs.
    If you want to reduce the time, you can drag the pausing point bit more to the right to decrement the non-active part (not totally till end). That is the best solution, especially if some users will have to work with restricted bandwidth. Or you use Go to Next Slide instead of Continue for the actions.

  • Advanced Action jumps Quiz slide pause point

    Hello,
    I have a project I have asked questions about in a previous discussion but as this is a new difficulty so I have started a new discussion. 
    The project in made up of only quiz slides and on each quiz slide there are:
    1 - 4 text boxes that are controlled by advanced actions with ss set as buttons....this part is working great.
    the quiz ...standard stuff
    and audio ...not working
    I created 2 groups and 1 ss set to function as a button.  Group 1 has an arrow and says "Play Audio" Group 2 has a square and says "Stop Audio".  On the first slide the action works great...just as I would like it to work.  After answering the question you then continue to the next slide and the audio works for three clicks...click to play, click to stop and then if you click again the slide jumps the pause point on the question slide and none of the buttons work on the slide at all.   It does not make a difference if you start the project form the beginning or from the middle, the problem is still the same.  The first slide works just as it should and the second slide jumps the pause point and you are shut down and can not continue. I am not able to click the submit, answer the question...nothing.  Any insight would be very much appreciated as once again, I am stuck.  I am not sure if the problem is caused by the fact that it is a quiz slide and there is something about the quiz slide itself that is causing the problem.  Or ... more likely, I am just missing something.
    Thank you.
    This is what the buttons look like.
    Play Pause Action:
    http://captivatecrazy.blogspot.ca/2012/09/play-and-pause-audio-using-advanced.html
    Advanced Actions and Groups, this was so helpful!
    http://www.youtube.com/watch?feature=player_embedded&v=Sy09xPoP69A

    You didn't watch the other video? It was about playing audio as well...Have also a long blog post about possible scenarios to play/pause audio. It is different, because it is about a real pause, not about replaying an audio clip as in your example:
    http://blog.lilybiri.com/toggle-shape-buttons
    Question slides are a different beast, you have always to be very careful there. I blogged about buttons on question slides:
    http://blog.lilybiri.com/want-a-button-on-question-slide-in-captivate
    The question slide objects have highest priority. I should explore this more in depth, but my intuition tells me that perhaps clicking on your shape button triggers the action that is performed as second step on the Question slide (press Y or click on the slide). Does it happen before  of after the user clicks the Submit button?
    Lilybiri

  • Review area on Question Slides

    Good morning,
    I'm creating several question slides and on each one, a grey
    "review area" keeps being displayed. What is this used for from a
    learner perspective and if I don't want it, how do I get rid of it?
    I've checked each of the Question tabs but can't find anything to
    deselect.
    Thanks for your help,
    Helen

    Hi Helen
    Let's say you have a True/False question with a Review Area.
    You take the quiz and on the Results slide, you see a button
    labeled "Review Quiz". If you click the button, you see a table
    listing:
    Your answer: B
    The correct answer is: A
    Of course, what you see here will vary based on choices.
    If you want to turn off the Review Area, click Project >
    Quiz Manager... > Quiz Settings tab and DE-select the option
    labeled "Allow user to review quiz".
    Cheers... Rick

  • Quiz Score Slide - Review Questions

    Hi all,
    I have put a number of discussions now and still can't seem to get this to work.
    Once a user has completed the quiz and got to the quiz score slide to find out if they have passed or failed - for both I would like them to be able to 'review answers'. I know there is a review quiz but this just tells them what they got wrong or right and not why.
    I have searched on Captivate and online to figure out how to make this work. I would like the user to be able to go through each slide and when there is a question they got wrong, there is an explanation for them.
    Is this possible and how do I do it?
    Thanks

    Hi there,
    You can have a slide as an explanation slide next to your quiz slides. You can use a conditional advanced action under On Enter property of the explanation slide. With the help of a variable called cpQuizInfoLastSlidePointScored, you will check whether the last answer was correct or not and have the explanation slide show/hide accordingly. For example, if each question in your project has 10 points associated. The variable will check whether the last question slide scored points were equal to 10, if yes then jump to next question slide and if no then go to the explanation slide.
    Here is how it will look in the advanced action window:
    Where Slide 4 is the next question slide and Slide 3 is the explanation slide.
    Hope this helps!
    Thanks!

  • Formatting the Quiz Review Area

    Is there a way to re-format the font, background, size or any
    other appearance aspects in the quiz review area? I know how to
    change the messages presented in this area via the Quiz Manager,
    but need help with changing the font size, etc.
    Speedy reply appreciated - as this is the last touch to a
    project due tomorrow. Thanks!

    Hi pewinggrim and welcome to our community
    Unfortunately, there is very little you can do with this.
    Pretty much what you see is what you get. Aside from the text, you
    can't really control formatting.
    Sorry... Rick

  • Adobe Captivate 6 problem with Review area text on Quiz results page

    Hi,
    I am using Adobe Captivate 6 and I have a test at the end of my project with the built in 'Quiz results page' at the end.
    However, the standard 'review area' provided always seems to play up for me. I have changed the 'quiz results messages' through the preferences and changed the font of the review area, but everytime I play my project the message displayed is in a different font that I did not set and the size is so large that the sentence goes off the screen. It has done this on numerous projects.
    I have changed the font of the review area and it shows up on my normal view, but everytime I preview the project or publish it, the font changes back to a strange default.
    Does anyone know how I can fix this?
    Thank you.

    Hannah,
    That is a very well-known bug in the last Captivate versions... if you screen these forums you'll find multiple threads complaining about it. Some fonts will work, I think Calibri works (not all styles however) and all the other fonts revert to Times New Roman. I'm a bit puzzled that you call it a 'strange default'.
    Lilybiri

  • Review Area issue in Captivate 5 quiz

    In testing a quiz I created in Captivate 5, I am finding that the Incorrect and Correct answers in the Review Area are truncated vertically. How can I get this text to show up completely?

    The best you can do is use a smaller text font.  The Review Area in Captivate 4 and 5 is not very configurable.  If you can upgrade to Cp 5.5 it's much improved.

  • Review Quiz skips over the first quiz slide during the review.

    I created a project with 2 quiz slides and a quiz results slide.  When I review the quiz at the end of the project it rewinds to the first quiz slide but skips over it and then stops/pauses on the 2nd quiz slide (last slide in this case).  I do not have a transition set for the quiz slides, and the "On Enter" setting is set to continue.  The slide has an infinite number of attempts set for it and the Failure levels is 1.  Report answers is set.  I do not have the LMS reporting set up yet.  I was going to use an internal server or perhaps Moodle if I can get that working.
    Stephen

    Did you remove any of the default captions from either of your quiz questions?  If so, delete those quiz question slides and add new ones from scratch.  Then test to see if the issue is resolved.

  • Create rrandom slides that are not quiz slides?

    Hi,
    None of the Quiz slide options provides the required quiz type I need, so I am going to create the whole course from scratch.
    I want to be able to create several slides with questions just from text I put on a blank slide, that when the user clicks a button to go to the next slide they will go to a random slide from a defined group of slides.
    Is this possible?
    If I create a slide Group, would it be possible to go to a random slide of that Group?
    I would also like to create a random starting slide so that a user does not get the same intro slide each time?
    cheers

    Hi there
    Unless someone has some fancy script to randomize things I'm going to claim it's not possible to randomize regular slides. However, I've always thought it would be a neat feature to have. I think I've subitted a feature request to ask for it in a future version. If you also believe as I do (and it sounds like you do) I'm hopeful that you and any others that feel this way will take a moment and submit a Feature Request to ask for this ability. (Link to the Feature Request is in my sig)
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Captivate 5.5 Review message no longer wraps in Review area caption box

    Has anyone else experienced this issue? I logged it as a bug when someone else in my company reported the same issue to me. I searched for it on the Internet and didn't get any hits. We tested to see if it was just for converted projects from 4 to 5.5 or for new ones as well. It's not working for new ones. This problem did not exist in version 5.
    Basically the text won't wrap so the text displays completely across the screen (no matter what size the Review Area caption size is), cutting off the text at both ends for longer feedback messages.
    Workaround: You can work around this issue by forcing a carriage return in your feedback messages by pressing Enter at an appropriate place in the message. You'll probably have to fool around with that a bit to determine the best place.

    So, here is my workaround:
    On the Quiz Review slide, I created two captions, one for passing, and one for failing.  I set both of them to be hidden.  I then created a conditional Advanced Action called ExamCaption and set one expression to show the Pass Caption if cpQuizInfoPointsscored was above or at my passmark, and set another expression to show the Fail Caption if cpQuizInfoPointsscored was below my pass mark.  I also set each expression to hide the other non applicable caption for good measure.
    I set the On Enter action to ExamCaption for this slide.
    Reading Lilybiri's blog, I also replaced the Captivate Pass/Failure captions with just a space for each, so that nothing is shown.
    Only problem is, the captions fade out after 3 seconds, the duration of the slide, despite being set to No Transition.  I therefore increased the length of the slide to 60 seconds.  If anyone has a better workaround, please let me know.
    Hope that helps!

  • Quiz slides

    Hi, I'm having a bit of trouble using the quiz slides.
    For example, I've tried a very simple Yes/No slide and it
    appears in edit mode with 'Correct, click anywhere to continue',
    'Incorrect...', 'You must answer the question..." and a review
    area.
    Despite fiddling with these boxes, I'm still unsure what to
    do.
    Any help?

    You will see thos options/preferences in the view you are in.
    You can click on the Preveiw button and see what the user will
    see.

  • Positioning quiz slide objects

    I am working on a Captivate 5 project with many quiz slides. The quiz slides were put into the project by someone else. I need to move the various quiz slide objects (submit button, back button, clear button, question text, review area, hint caption, and so forth).
    These objects need to be moved to the same position in all of the quiz slides. I've been moving these objects into place one by one and it is very tedious.
    Is there a way to set up a style to move all of these objects on all quiz slides at once?

    Each of the objects you mention on the quiz slide are a special type of object in Captivate.
    So although Object Styles do not allow you to specify the X and Y coordinates of an object, you CAN just move one of these objects on one slide to the location you want them all to be, and then go to the Position and Size accordion in the Properties tab (Transform accordion in Cp5.5), look for the small dropdown in the top right corner of the accordion, and choose the option to Apply to all items.
    The name is a bit misleading because it make you think this will actually apply the positioning setting to every item in the project.  But the fact is that it will only apply it to items OF THE SAME OBJECT TYPE. So although you would never do this for something like text captions in the main part of your project, you can safely do it for things like Submit, Clear, Back, and Next buttons in quiz slides because each of them are actually totally different object types as far as Captivate is concerned.
    Note also the option to Apply to all items of same style.  This means you can create custom styles and apply them to just certain buttons or captions if you only wanted SOME items to be positioned in a certain way, while all other items should retain their original positions.

  • Why do quiz slides not work in LMS?

    Using Captivate 7. Scorm 2004. I added three multiple choice quiz slides to the course, interspersed between content pages, to act as review questions. Each quiz slide has a Submit and a Clear button.
    When I reloaded the updated course, now with the quiz slides, to the LMS (Cornerstone -stage environment), the options on the quiz slides are not clickable and the Submit and Clear buttons are missing.
    My settings are:
      Completion - based on slide views - 100%
      Success - based on slide views - 100%
      Quiz - "Optional - user can skip"
      Pass/Fail - 0% required to pass
      If Failing: Allow infinite attempts - checkbox (but I've also tried 1 attempt)
    Thanks!

    Thanks, Lieve. Actually, I think the reason that the LMS did not correctly display the quiz slides is because it had already marked me as "complete" (I had taken the course multiple times previously.) Plus in all the various versions I re-loaded to our Stage environment, I kept changing quiz settings, etc., and I think the poor LMS was just so confused. So after I made a few more changes to the course (see below) and logged in as a different user, the course and quiz slides displayed correctly.
    I made these changes to quiz settings in Captivate:
      - I based completion on only "Slides viewed" -- not on "Quiz is passed"
      - On the "Pass or Fail" settings, I changed "Go to next slide" to "Continue"
        and under  "If failing grade," I changed "1 attempt" to "infinite attempts."
    I also removed the reportable click box from slide 1.
    So I'm not sure which of these changes solved the problem, but the course is working correctly now, thankfully.

Maybe you are looking for

  • Websphere5

    When I try too add JSP files in the Websphere5 app server, creating a .ear file and then install the application, I get the error message that it could not compile the JSP files. The same had been deployed in Websphere3, so will there be any problem

  • HT4550 Download or Print PDFs from Safari

    I cannot get Safari to download pdfs or print them from the screen. If I try to download it tells me file cannot be saved. If I try to print, the pages are blank. Any suggestions? iMac 27"

  • Labview 2009 would not close properly

    Hi everyone! I have been having problems with our recent upgrade from LabView 7.1 to 9. I have removed 7.1 completely and have installed everything that came with the installation DVD's in LabView 9. When I went to my old VI's and continued to work o

  • I just installed Lion OSX. Where can one find the "domain" for iWeb?

    With Snow Leopard one could find the "domain" for one's iWeb in Admin+Library+application support+iWeb. When one changed computers, one simply had to save this domain and then put it in the right place in the new computer. Things have changed with Li

  • Maps error

    So how does this make any sense? I'm in San Diego. (Which is in California, USA, if that's not clear to the Apple Maps people...)   I want directions to the main library in San Diego. I click on that little compass needle or whatever so the iPhone zo