Qustion have 2 nexus 3000 setup in vPC domain, want to add the 3rd one, How is this done?

If some can supply a sample of what the 3rd Nexus Switch configuration.
Nexus-1 Config
vrf context management
ip route 0.0.0.0/0 192.168.50.1
vlan 1
vlan 10
name ISCSI_VLAN
vpc domain 1
peer-keepalive destination 192.168.50.242
peer-gateway
interface port-channel1
switchport mode trunk
switchport trunk allowed vlan 10
spanning-tree port type network
flowcontrol receive on
flowcontrol send on
no negotiate auto
vpc peer-link
interface Ethernet1/52/1 - 4
switchport mode trunk
switchport trunk allowed vlan 10
flowcontrol receive on
flowcontrol send on
channel-group 1 mode active
Nexsus-2 Config
vrf context management
vlan 1
vlan 10
name ISCSI_VLAN
no vpc domain 1
peer-keepalive destination 192.168.50.241
peer-gateway
vpc domain 1
peer-keepalive destination 192.168.50.241 vrf management
peer-gateway
interface port-channel1
switchport mode trunk
switchport trunk allowed vlan 10
spanning-tree port type network
flowcontrol receive on
flowcontrol send on
no negotiate auto
vpc peer-link
interface Ethernet1/51/1 - 4
switchport mode trunk
switchport trunk allowed vlan 10
flowcontrol receive on
flowcontrol send on
channel-group 1 mode active

VPC can only have 2 members
HTH

Similar Messages

  • I have gotten a giftcard for iTunes and I want to spend it but before I had a credit card giftcard and I spent it all and now I don't have a credit card and I just want to use thee iTunes one how do I delete the card on my iPhone

    I have gotten a giftcard for iTunes and I want to spend it but before I had a credit card giftcard and I spent it all and now I don't have a credit card and I just want to use thee iTunes one how do I delete the card on my iPhone

    Hello Clancbelle,
    It sounds like you have a credit card saved to your Apple ID payment information and you would like it to be removed from the account and set the payment method to None. You should be able to do this with the following article:
    iTunes Store: Changing your payment information
    http://support.apple.com/kb/ht1918
    Changing your payment information using an iOS device
    Tap Settings on the Home screen.
    Tap iTunes & App Stores.
    Tap your Apple ID. (If you aren't signed in, enter your Apple ID and password and tap Sign In.)
    Tap View Apple ID.
    Enter your Apple ID password.
    In the Edit section, tap Payment Information.
    Update the information that you want to change.
    Tap the Done button when you're finished.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • HT4436 need to setup another icloud e-mail address on Mac...How is this done?

    need to setup another icloud e-mail address on Mac...how is this done?..Thanks...

    You can set up up to three 'email aliases' which are additional addresses which deliver into the same inbox as the main address. You do this on the iCloud website, not in Mail. Please see this page:
    http://help.apple.com/icloud/#mm6b1a490a

  • My battery was at 11 hours per cycle. Now i only have 4 hours since i downloaded os x maverick am i the only one who has this problem or could it be a malware

    My battery was at 11 hours per cycle. Now i only have 4 hours since i downloaded os x maverick is this just my computer or could it be a malware.

    Actually coconut battery works perfectly fine for Mavericks, many pro-users on this board are using same with Mavericks, so, incorrect.
    I have done exhaustive testing on same on several diff. Macs with Mavericks
    SMC reset will show correct battery reading for a short while, however no, "time remaining" is NOT correct currently, and techs. are working on this occurrence.    Your experience with Mac has no bearing whatsoever on current time remaining indicator with Mavericks.
    Endless testing shows that accurate time remaining will present itself, for a short time, after a SMC reset, but this is often very short lived.
    The quickest methodology to FAULT this reading is to open a high task APP (photoshop, video feed, flash, etc.)
    See post on page 10 of this thread.
    *Further testing on 3 machines 2 days ago have shows that if a wake from sleep is induced, the "time remaining" on a 50-60% charge will show "20 hours remaining" on 2 diff. macbook Air 2013 13" I5 (very inaccurate of course)
    Battery APPS used were:
    1. Mavericks resident batt. indicator.
    2. coconut battery (coconut doesnt estimate time however but mAh)
    3. Battery time v 2 (mAh and % remaining, not time remaining)
    4. Battery APP "fruit juice"
    *For those receiving ACTUAL LESS battery life, other variables are in play
    Happily however, my ACTUAL TIME on a full charge on 2 diff. Air (mine and a borrow) has increased an average of 25%

  • HT4436 I have 600 cds to move into icloud---how is this done---other than painfully importing 0ne at a time into itunes library???

    I have just subscribed to Icloud and moved my itunes library in--I would like to add 600 cds now---how is this done--does each one need to be downloaded into my itunes library first?? Is there an easier process----Thanks to anyone

    Yes. Each one has to be imported into iTunes first.
    Allan

  • I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network.  I select Extend Wireless network but have no success. Ideas?

    I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal.  The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available.  I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play.   I got the plug, but no play.  I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status.  I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times.  Then wait 45 seconds and the default settings will return.  I did all that, only to find out that after the initial flash of green, green never appeared again.  I got a fast flashing yellow light, followed by the light going off.  Apparently this didn't reset it properly.  So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
    highFly376

    Let's see if I can get this straight.
    You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
    Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
    Correct?
    See this Apple document:
    http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
    The wireless unit on the right of the diagram can be either of the newer Apple base stations.
    Extreme, Express, Time Capsule

  • I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

    I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

    As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
    http://web.me.com/pondini/Time_Machine/Home.html
    http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
    And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

  • I have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules

    i have a mac mini mid 2011, this device have; 2,3GHz and 2 Gb Memmory.I want to upgrade the memory and i need the list of supported memory modules. i am from turkey.

    Welcome to Apple Support Communities
    The Mid 2011 Mac mini supports 8 GB of memory officially, but you can install up to 16 GB of RAM, so you can use 2, 4 and 8 GB modules. You can buy more RAM from OWC or Crucial.
    If you are looking for memory at a local shop, make sure you buy 1333 MHz DDR3 memory. See > http://support.apple.com/kb/HT4432?viewlocale=en_US&locale=en_US

  • HT1386 I have an older ipod classic with tons of music I collected over several years.  I want to add the music from this to my itunes library.  When I connect it, I don't see that option. How can I do this?

    I have an older ipod classic that I have had for about 5-6 years.  I used this to download music from cd's through an older computer that doesn't work anymore.  I want to add the music to my current computer I-tune library, but can't figure out how to do it.  How do I import this music from my older itunes ipod so that I can then sync some of it with my iphone.  Hate to lose all of this music since it took me years to collect and download it.

    Welcome to Apple Communities
    Use CopyToy to move your music to your computer

  • I have an existing mini mac and 4 tb external drive. My iTunes library exists on the external drive under /itunes... I have purchased a new mini mac and I want to leave the library where it is but move to new mini mac.. what do i need to do ?

    I have an existing mini mac and 4 tb external drive.
    My iTunes library exists on the external drive under /itunes...
    I have purchased a new mini mac and I want to leave the library where it is on the external drive but move to new mini mac and have it show as it did on the old mini mac..
    what do i need to do ?
    I have found multitude of articles about moving itunes to external drive or other similar things but I don't want to move itunes from the external drive, just change mini mac machines and have everything in itunes the same..
    Thanks

    I had already tried that one and got this...
    below is screen shot of what is on the new mac mini
    and what is on the external drive now connected to the new mac mini..
    There are no media files on the mac mini just the library files and on external just media files..
    Do I need to copy anything over from the old mac mini ? xml files ? .. the itunes folder on old mini is about 840mb in size which looks to have artwork ect ? .. I am fairly computer literate, but this one has me stumped.. ?
    thanks for help

  • I have an Icloud account with my parents but want to make a new one. Will I lose everything that is currently on my phone? i.e. phone numbers, pictures, music

    I have an Icloud account with my parents but want to make a new one. Will I lose everything that is currently on my phone? i.e. phone numbers, pictures, music

    In case you're not clear - iPad/iPhone storage, and iCloud storage, are totally separate. Buying more iCloud storage does not give you more storage space on your device. Your device has a fixed storage space for apps and data (e.g., 16GB - which is more like 12GB in real terms). iCloud storage just allows you to store more documents, mail, photos, etc, in the cloud.
    Matt

  • Hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    hey, for some reason i turned on my macbook pro 2012 and it says i have no internet access. I then found out that it also says that my self assigned ip address will not connect to the internet. How is this and how can i fix it?

    Reset your modem.

  • How do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?

    how do I do to use the same appleid on all my devices, I want to use the last one I have on my Ipad mini, do I deleta the one I have on my Iphone and reeinstall it with the Id I use on my Ipad..?

    Hi john,
    Yes, you would sign out of iTunes & App Store: Settings>iTunes & App Store, click on the Apple ID, click on Sign Out. Then sign back on with the new Apple ID. Also, if you have an iCloud account with the other Apple ID, you would delete that iCloud account, and then sign on with your new ID: Settings>iCloud>Delete Account.
    Cheers,
    GB

  • I have  anew computer and my ipod was attached to the old one, how can i have my music download to the new computer and sincronize it.

    I have  anew computer and my ipod was attached to the old one, how can i have my music download to the new computer and sincronize it.

    If you no longer have the old computer this will be very helpful and If you have other content - apps, books, movies, that you want to transfer to the iTunes library - you need to transfer your purchases from the iPod to the computer as well.
    Take a look.
    https://discussions.apple.com/message/16153193#16153193
    This works the same way whether you have a Mac or a PC.

  • I have a few hundred duplicates in my iPhoto library, but the file sizes are different.  So one is 1.3mb and one is 567kb.  I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this?

    I have a few hundred duplicates in my iPhoto library, but the file sizes are different.  So one is 1.3mb and one is 567kb.  I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this?  I've been looking at Duplicate Annhilator but I don't think it can do it.
    Thanks!

    I just ran a test with iPhoto Library Manager, Duplicate Annihilator, iPhoto Duplicate Cleaner, Duplifinder and Photodedupo.  I imported a folder of 5 photos into a test library 3 times, allowing iPhoto to import duplicates.  I then ran the 5 photos thru resizer to reduce their jpeg compression but all other aspects of the file the same.
    None of the duplicate removal apps found set that was reduced in the file resizer. That's probably due to the fact that the file creation date was being used as a criteria and the resized photo would have a different file creation date even though the Image Capture date was the same.
    They all found the 3 regular duplicates and some of them would mark two and leave the 3rd unmarked.  iPhoto Duplicate Cleaner can sort the found duplicates by file size but if the file was edited to get the reduced file size it might not be found as it would have a different file creation/modification date. 
    iPhoto Library Manage was able to find all duplicates and mark them as such if the file names were the same the the filename option was selected.  Otherwise it also missed the modified, resized version.  It allowed one to select the one photo to save before going to work on the library.
    So if a photo has been reduced in image quality or pixel size it will not be considered a duplicate.
    OT

Maybe you are looking for

  • How do I avoid re-entrant problems in Oracle JVM

    I have a Java program called LanguageFunctions. This Java program has several methods that translate the data within a String or CLOB. I want to use this Java program as a stored procedure, and specifically the methods as Oracle functions. I want thi

  • Detall with the configuration in cluster of my system PI

    Hello people We have  installed PI in cluster of microsoft 2003 and one application server with  this configuration, sometimes presents  problem with interfaces with status http_status_not_ok and with the load of the interfaces is slow. We tested a s

  • Proper way to exit with a j2ee java app running in the NW70 j2ee engine

    Hello, I am working on migrating an app and it's ear from j2ee 6.20 to 7.0. It deploys okay, but when invoked, the j2ee server restarts. Looking at the part that fails, its trying to create a jco connection, which fails and then it catches the failur

  • Nilvaiu Error (Resource not found)

    I have developed an application that uses DAQmx to take data.  While running in development mode, the software works fine.  When I generate an executable and run the code, I get the Nilvaui.dll resource not found error (see attached).  I can turn off

  • Default Settings in PSPWare

    Is everyone sticking with the defaults? 320x240 resolution and normal sound/video quality?