R12.1.1 +11.2.0.2 Non RAC to RAC Upgradation

Dear Experts,
Kindly note that one of my Client is running there Oracle E-Business Suit R12.1.1 + 11.2.0.2
on Single Node Installation. Now we are planning to Implement
Oracle E-Business Suit R12.1.1 + 11.2.0.2 + RAC ?
Please advise us on the Hardware , Licenseing Information for RAC etc ?
Regards
Mohammed. Abdul Muqeet

For License questions/queries, please contact your Oracle Sales representative (or Account manager), he/she is the best one to answer such questions.
Please also see:
Global Pricing and Licensing
http://www.oracle.com/us/corporate/pricing/index.html
Thanks,
Hussein

Similar Messages

Steps to Convert R12 Non-Rac to RAC database with ASM

dear All,
We have following environment.
R12.0.6 with a non RAC 11.2.0.2 database on on AIX (64bit). Datafiles are stored local filesystem. We want to do the following.
Migrate the database file to ASM
convert database Non RAC to RAC
we have gone through many oracle support documents but were unable to decide which path we should adopt. Any body who has done similar activity; please share only highly level steps. No step by step Instructions are needed. e.g. Install Grid Infrastructure (for single instance or the one which comes with cluster home???????), Move datafiles to ASM etc etc
Please make sure the steps are for 11gR2 and EBS R12.
Best Regards,

we have gone through many oracle support documents but were unable to decide which path we should adopt. Any body who has done similar activity; please share only highly level steps. No step by step Instructions are needed. e.g. Install Grid Infrastructure (for single instance or the one which comes with cluster home???????), Move datafiles to ASM etc etc
Please make sure the steps are for 11gR2 and EBS R12. The steps in [ID 823587.1] which is referenced above should be sufficient (from your post, I understand that you have covered the steps in this doc) -- What exactly you have issues with?
Thanks,
Hussein

Oracle E-Business Suite non-rac to rac

Hi,
I've r12.0.6/10.2.0.3/RHEL5.3/file system NON-RAC and want to go r12.0.6/11gr2V2/RHEL5.4/ASM and RAC enviornment.
Planning to move as follows:
-Upgrade RHEL 5.4
-Upgrade to 11gr2V2
-COnvert to ASM
-Configure to RAC.
Please advice if any idea which has less risk.
Please let me know metalink note convert single instance to RAC doc /File System to ASM or any good note.
Any advice is welcome.
Thanks

Please see this thread for similar discussion.
Cloning non-RAC to RAC ?
Cloning non-RAC to RAC ?
Thanks,
Hussein

Cloning non-RAC to RAC ?

Hi,
Is it true that Oracle does not support cloning of single node instance EBS R12.1 (Non-RAC) to RAC?
Is there other supported way to do it? both using rapid clone or manual?
Thanks a lot
MsK

Hi,
How about the patches needed? Make sure you have the latest Rapid Clone and AutoConfig patches applied on the source instance.
Our source db is 11.1.0.7, and the target db is also 11.1.0.7 ....but there are patches mentioned in 802875.1
Do I need to follow this Note?If you are already on 11.1.0.7, then you do not need to apply those patches.
Regards,
Hussein

Non RAC to RAC using RMAN

Hi All Oracle Guru's!
I have an environment right now which consists of non rac and rac databases.
What I want to do now is duplicate my non rac database going to the rac instance using RMAN duplicate. The rac instance is freshly configured.
How can this be done? Is there any other options? Im using 10gr2.
Please guide me.
Thanks in advance!

cmadiam82 wrote:
Hi All Oracle Guru's!
I have an environment right now which consists of non rac and rac databases.
What I want to do now is duplicate my non rac database going to the rac instance using RMAN duplicate. The rac instance is freshly configured.
How can this be done? Is there any other options? Im using 10gr2.
Please guide me.
Thanks in advance!Do an RMAN restore on node 1 for example. that should work.

Non-Rac to Rac conversion using rconfig

hi all,
how to check whether Non-Rac to Rac conversion using rconfig has been completed sucessfully?
thanks.
Edited by: varun4dba on Nov 10, 2010 1:02 PM

select parallel
from V$instance;
-- run it on your any RAC instance. if YES then you have converted to RAC
http://oracleinstance.blogspot.com/2009/12/convert-single-instance-to-rac-instance.html
Check the above link also.
Regards
Asif Kabir

Non RAC to RAC

Hi,
I need to convert a Non-rac to RAC. Can somebody help me with note or doc for doing this ?
Thx

1. Set the init parameter cluster_database=false (or remove it since false is the default). You'll have to set it in the parameter file since it is not dynamic.
2. Shutdown all instances. Start the one that you want to survive.
3. Cleanup as necessary: remove extra UNDO, REDO files
4. If you want to remove clusterware, that's another whole question. There's a ML article on how to remove clusterware.
5. If your database uses ASM, you'll need to do #1 for the ASM instances as well.
That's high-level, but I haven't seen a complete paper/procedure for this published anywhere yet.

Convert from Non-RAC to RAC-What should be the approach?

Hi All,
We have a single node installation with EBS 11.5.10.2 and 9iR2 db.
Our requirement is to upgrade the db to 10gR2 and implement RAC.
I am really confused as to how should we proceed with this.
1.If we upgrade the database to 10g first,can it be converted to RAC after this upgradation?If yes then how do we do it??Using rconfig???
2.What exactly we need to do regarding the filesystem?At which step this conversion has to be done??
3.If our current filesystem is raw,then at which point we need to convert it to ASM/OCFS??ie before upgrading the db or after it is upgraded to 10g??
Looking forward for inputs..
Thanks in advance.

You can do it either way. It kind of depends on your requirements. Do you have minimal downtime requirements to meet? Do you have the ability to set up you hardware at your leisure, or do you have to reuse your current hardware? Given all the time and hardware I needed, I would do it like this:
1. Acquire the new hardware.
2. Configure the hardware and shared storage.
3. Install clusterware.
4. Install Oracle 10gr2.
5. Backup your old instance.
6. Migrate your old database using export/import or whatever method you like.
Whatever method you choose, it is vital that you rehearse on a non-critical instance to make sure your methodology is valid.

R12 RAC to RAC

Hi,
Is there any document for R12 RAC to RAC cloning with ASM,RMAN
Tx

Hi;
Is there any document for R12 RAC to RAC cloning with ASM,RMANPelase check below notes:
Cloning Oracle Applications Release 12 with Rapid Clone [ID 406982.1]
Rapid Clone Documentation Resources, Release 11i and 12 [ID 799735.1]
RAC: Frequently Asked Questions [ID 220970.1
Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone [ID 559518.1]
Also check below threads:
rac-r12-ebs-asm
Re: EBS R12 with RAC and ASM on AIX 5.3
rac-EBS wiht asm
Re: RAC for EBS R12
Regard
Helios

NON RAC to RAC migration oracle ebs R12 (12.1.2) 11g R2 Database (11.2.0.1)

Hi ALL,
Please suggest since we are in planing to go for RAC my environment is as :
EBS R12 (12.1.2)
Database 11gR2 (11.2.0.1)
Currently i am on NON ASM .
---------------------------------------Kindly provide me steps to implement the same since i have seen the MOS ID 1072636.1 but not able to get so please provide me steps.
Best Regards,

Please suggest since we are in planing to go for RAC my environment is as :
EBS R12 (12.1.2)
Database 11gR2 (11.2.0.1)
Currently i am on NON ASM .
---------------------------------------Kindly provide me steps to implement the same since i have seen the MOS ID 1072636.1 but not able to get so please provide me steps.All the steps are documented in (Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 [ID 823587.1]).
Thanks,
Hussein

R12.1.3 - Pick release for batches completing in error during upgrade

Hi,
We are upgrading from 11.5.9 to 12.1.3. Pick release for batches fails with the following error message in log file.
The delivery lines given in the log file all have sub-inventory restricted items. We don't use WMS.
Any help/pointers greatly appreciated!
Scenario:
=======
Batch pick release performed for sub-inventory "A". The program "Pick Selection List Generation" fails with the following error message.
Items on the failed delivery lines are sub-inventory restricted and assigned to sub-inventories "B", "C" & "D".
Error Message:
============
Could not Create Move Order Line for Delivery Detail XXXXX
Delete Line 9.990000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000E+125
Error occurred in Inv_Pick_Release_Pub.Pick_Release
ORA-22160: element at index [32] does not exist in Package INV_Pick_Release_PUB
Procedure Pick_Release
Unexpected error from INV_Pick_Release_Pub.Pick_Release. Exiting
SQLCODE: 1 SQLERRM: User-Defined Exception
Exception occurred in WSH_PICK_LIST.Release_Batch_Sub
Error occurred in Release_Batch_Sub
SQLCODE: 1 SQLERRM: User-Defined Exception
Exception occurred in WSH_PICK_LIST
Thanks,
Renganayaki S

Please see if the following docs help.
Pick Release Error: 'Could not Create Move Order Line for Delivery Detail'. (Doc ID 748927.1)
Cannot Pick Release Non-Inventory OPM Items In R12 (Doc ID 1481238.1)
Pick Slip Report Complete With Null Value After Release Sales Order (Doc ID 1362175.1)
If none of the above helps, you may log a SR.
Thanks,
Hussein

AppleTV not showing non-synced content since upgrade to iTunes 8.1.0.52

Prior to upgrading to 8.1, my non-synced content showed on my AppleTV (when iTunes was open on my computer). Following the upgrade, the only content showing on the AppleTV is content that is synced to it.
iTunes can see the AppleTV and I can sync content to it. Under "Settings" for the AppleTV I have "Custom Sync" selected and the "Show only synced content on my AppleTV" box is not checked.
Any ideas how I can get non-synced content to show again in the AppleTV?

That's exactly what I did, it took ~20sec to complete the "apply to enclosed items" command (there was heavy disk access), but it does not improve. The permissions stay the same for the files/folders in question. It's very odd, have a look at the screenshot:
Some folders have correct permissions, others (to which I have no access through iTunes) show "admin" twice as the only user who is allowed to write. Repair permission does not help. I have hundreds of files/folders where permissions are wrong, only since the upgrade recently.
http://img4.imageshack.us/img4/33/permission.png
Message was edited by: JJulian (added screenshot)

Can't launch any "non-Apple" apps after upgrade

After I upgraded my Iphone 4 to iOS 5 - I can't launch any non-Apple apps. They start to launch and then instantly die. Launching any of the default apps works fine though. Has anyone figured out a fix? This is horrible.

So WEIRDEST thing!!! I deleted/reinstalled facebook, and then tried an app that hadn't worked 20 minutes ago...... ALL my apps are working now! ***? well, sorta - my music is still missing...

Database migration from non rac and non asm to RAC database with ASM

HI,
i have requirement to import one database ( db1) which running one node with out ASM and with out RAC , now i want to import that database with rman backup to another database ( db2) which running on different server with 3 node RAC and ASM ( disk group +DATA ) , can you please provide me the steps how i can migrate.? ( i have created db2 with dbca with RAC).
regards,
sri

Sri,
This could be done multiple ways. Simplest for you is to use DBCA:
http://download.oracle.com/docs/cd/B28359_01/install.111/b28264/cvrt2rac.htm

Non RAC to RAC clonning

Hi all.
I have installed EBS in OEL5 OS, and database 10g R2 pachset 3.I have database and apps server in the same machine.
Is it possible using rapid clone to go to RAC?
Is there any doc or a road map for doing this?
Thanks in advance
Soni

Soni,
Use Rapid Clone. For more details, please refer to the following document.
Note: 799735.1 - Rapid Clone Documentation Resources, Release 11i and 12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=799735.1
Note: 783188.1 - Certified RAC Scenarios for E-Business Suite Cloning
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=783188.1
Regards,
Hussein

R12.1.1 +11.2.0.2 Non RAC to RAC Upgradation

Similar Messages

Maybe you are looking for