R12 - Help for Disabling of Home and Preferences links

Hi all,
I am trying to disable the home and preferences link (the global links) for a OAF page. As per the suggestion provided in the below link, i have made changes to the code.
[Thread: Hide 'Home Logout Preferences....' links in a OAF page.|http://forums.oracle.com/forums/thread.jspa?threadID=1097841&tstart=135]
This works just fine when run from JDev. However, when ported to server and running the same, the global links still get displayed.
After moving the Controller class to server, apache bounce was carried out.
Help on this will be much appreciated.

Sorted! Changed from WPA2 to WPA/WPA2 and everything is OK!

Similar Messages

Home and preferences link disappeared in my custom page

Hi. I created 2 custom pages and they are working fine. I see everything including the global links
But after I created tabular entry in the menu I don't see global links anymore
Steps I did:
Created a new menu X with "Menu Type" Home Page
It has 2 entries . Each one is a function (lets call them A and B). A calls custom page 1 and B calls custom page 2
For each function in parameter section I provided:
For Function A: &OAHP=X&OASF=A
For Function B: &OAHP=X&OASF=B
As a result, when I access menu X I see 2 tabs, first one displays page 1 and second one displays page 2
But I don't see Global links anymore (home, preferences....)
I tried to add the following code to processRequest, but it didn't help
//show links
OAPageLayoutBean page = (OAPageLayoutBean)pageContext.getPageLayoutBean();
page.prepareForRendering(pageContext);
OAGlobalButtonBarBean buttons = (OAGlobalButtonBarBean)page.getGlobalButtons();
buttons.setRendered(true);
buttons.setTabularFunctionCode();

If you haven't restarted your Mac, do so and see if that helps.
If not, in Safari, press Command , (comma) to open Safari Preferences then select the Privacy tab.
Click Details then type in the name of the genealogy site then remove all items from the results.
Then press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari to test.
Message was edited by: CS

Possible Issue with help for "disable property node"

Hi, In Labview version 9.0 (32-bit) there seems to be a conflict between help info for the Enum constant as applied to the disable property node . If I right click on a control variable and select create-> property node -> disable. If I then right click on disable -> help for disable, the help lists the following interger assignment 0 - Disable, 1- Disable and Greyed, 2 Enable. If however, I right click on the generated Enum constant and select properties -> Edit Items, the listing order is as follows; 0- Enable, 1- Disable, 2- Disable and Greyed. The latter assignment is how the Enum constant actually works. It appears that the help information may be incorrect.
Regards,
Pat
Solved!
Go to Solution.

Hi,
I compared it with 8.2.
In 8.2 creating a constant, indicator or control by right clicking on the "disabled" property node gave an object of type U8, which operates in accordance with the "help for disabled", ie
0=Enable
1=Disable
2=Disable/grey
In 9.0/2009 right clicking and creating on the property node gives an Enum (of datatype U8) with names/values in agreement with 8.2, and operation as in 8.2, BUT the "help for disabled" message says
0=Disable
1=Disable/grey
2=Enable
Thus I would agree that this is a documentation error, and the LabVIEW is correct.
N.I. Can we have a CAR please?
P.S. I do think that it is a good idea to have made the disabled property an enum, whilst maintaining compatability with previous code. I always wondered why it wasn't that way in earlier revisions.

Microsoft Query for Office 2013 Home and Business

Where can I get Microsoft Query for Office 2013 Home and Business version? I have used it for years on my old XP machine with Office 2003.
Thank you, Sue

Hi,
You seem got an error like "Microsoft query could not be started because it isn’t installed" when you used it.
It may be not installed yet. We can go to "Control Panel\All Control Panel Items\Programs and Features\Office 2013 Home and Business\change\Microsoft tools\MS query" and check if it is installed/enabled.
If it is not installed, please use the Install CD/ full installation copy to reinstall it.
http://social.technet.microsoft.com/Forums/office/en-US/eb7bfe7d-8fa4-4faf-8563-13ae8b04346d/microsoft-query-could-not-be-started-because-it-isnt-installed?forum=excel (It
also applies to Excel 2013)
Regards,
George Zhao
TechNet Community Support

Software: Microsoft Office For Mac 2011 Home and student:

Software: Microsoft Office For Mac 2011 Home and student: Is the Excel software in this package Excel 2010 or Excel 2007 or something else?

It's Excel 2011.
Post further Office related questions on Microsoft's own forums for their Mac software. Apple Communities only provide support for Apple products:
http://answers.microsoft.com/en-us/mac

Re-assigning a retail license for Office 2010 Home and Student - any charge for support?

I want to re-assign one of three licenses for Office, but I went to the Support website, which prompted for the product ID and indicated that the "free support"period had expired, presumably because it is 12 months since I first installed it.
Can the reassignment be organised at the time of activating on the new computer by phone? Would a person be speaking with a human if doing a phone activation? Will there be a charge and what's it likely to cost?
I also have a suggestion for Microsoft: a de-activation routine that would enable the license transfer process without the need for human support.

Hi
Normally Office for a retail version can only be activated once at a time in one computer, Office 2010 Home &Student can be installed on three machines.
If you have used up your activation times and want to transfer your Office to a new computer, contact Microsoft Customer Service and they will help you to activate your Office in a new machine:
http://support.microsoft.com/kb/295539/en-us
Tylor Wang
TechNet Community Support

How can I get microsoft feeds for microsoft at home and at work newsletter?

I can't get the "microsoft at home and at work newsletter"
It keeps asking me to register

Hi,
Firstly you need to install Software and drivers for your printer on your Windows 8 machine using the following file:
http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
Microsoft Picture It is not compatible with Windows 8 therefore you can't use it anyway:
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductDetailsViewer?Name=Microsof...
You can simply scan as jpg files and use them for other software.
Updated: I saw few of your posts for this same problem.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hide About this page,Home,Logout,Preferences links

Hi all
I have a requirement to hide About this page,Home,Logout and Preferences,Personlaize page links.
How can i do that?
To hide Personalize page link i know one profile value is there
FND: Personalization Region Link Enabled if i set it to No,Personalize page link will not come but Requirement is They want only this links to be not rendered on this particluar page,For other pages,link should come.
Is there any property at page level,which i can set?
Can anbody throw some points?
Thanks
Hitesh

No you don't need to change the layout all what u need is to implement the following code
OAPageLayoutBean page = pageContext.getPageLayoutBean();
// You must call prepareForRendering() if the following code is
// included in a pageLayout controller. If you add it further down
// in the layout hierarchy, the menus will be fully processed so you
// don't need to do this.
page.prepareForRendering(pageContext);
OAGlobalButtonBarBean buttons = (OAGlobalButtonBarBean)page.getGlobalButtons();
buttons.setRendered(false);
that's it
keep it up
Ahmed Alshaer

Configuration help for 2nd lan to lan vpn link

Hello,
I have successfully configured a lan to lan vpn link between two offices. I am attempting to add another link to a 3rd office from my home office but am having some trouble. I have attached my configuration and am hoping someone can help me fix my problem. Right now I have a working vpn to 172.16.0.0/24 network and am trying to set up the link to 172.16.3.0/24 as well. To the new vpn connection I can ping the outside interfaces but can't ping anything internally.
Thanks for your time and help,
Jason

Jason
There is one significant mistake that is easy to fix. You have correctly created a second instance of the crypto map to create a VPN tunnel to the second site. But as currently configured both instances of the crypto map use the same access list:
crypto map clientmap 1 ipsec-isakmp
match address 100
crypto map clientmap 5 ipsec-isakmp
match address 100
But each VPN session/tunnel needs its own access list. So I suggest that you make the following changes:
crypto map clientmap 5 ipsec-isakmp
match address 101
no access-list 100
access-list 100 permit ip 192.168.0.0 0.0.0.255 172.16.0.0 0.0.0.255
access-list 101 permit ip 192.168.0.0 0.0.0.255 172.16.3.0 0.0.0.255
This provides a separate access list for each session/tunnel and should resolve that issue. Give it a try and let us know the result.
HTH
Rick

Disable F4 Help for disabled field in ALV?

I have an ALV table in which I display a field, which has an automatic F4 help defined in DDIC.
Via a button ("Display/Edit"), i set the input field to enabled and disabled.
This works, but the F4 help is visible in both modes.
How can I disable the F4 help when I am in display mode?

Hi ,
U can deactivated the value help by calling the method ..SET_ATTRIBUTE_VALUE_HELP of class IF_WD_CONTEXT_NODE_INFO for the attribute and passing the parameter VALUE_HELP_MODE = C_VALUE_HELP_mode-deactivated .
Regards
Yash

Help for documentation about jsp and tomcat

Hello
This is realy very urgent for me!!Does anuone can help me.
There is my problem .I nead books (hypperlink) for jsp or tomcat.
who made it why and how does it looks.I am writeing documenation for my project and i have to finish it very soon.I found some tutorials btu it is noy enough if you know for something better i would be vry gratefull.
By

Hi,
I agree, the basic documentation at the jakarta site is good, but needs a little polishing/updating.
Use google to do a search, and wade through loads of stuff before coming up with the answers, or this site is pretty good too!!!!!
Unfortunately, all the answers are not always forthcoming until you know which questions to ask (or the relevant words to enter into a search engine).
best
kev

Help for building a driver and newbie questions in the area.

Hello,
i�m currently needing to develop a driver for a usb device, a link cable. I allready know (at least i think i know) the process to depevelop such driver.
The process would be something link this (dind put any arguments in functions to be faster):
- usb_client_attach (dev_info_t * dip, USB_DRIVER_VERSION, FLAGS); - for system reconiction of device
- usb_get_dev_data (); - for having the main/control pipe
- usb_lookup_ep_data(); - for get endpoint
- usb_open_pipe(); - opening the pipe (can be done several times for several pipes)
- read/write/bulk transfers(); - exchanging data throuh input/output pipes if such exists
- usb_close_pipe(); - closing all pipes other than the main one
- usb_client_dettach () - dettaching device from system
i think this is the general order of events/routines.
My problem is in the first routine, the usb_client_attach(). How do i know that i�m connecting the right device. (let�s say i�d like to connect a USB PEN for example), the dev_info_t * dip is an empty structure, how do i fill it with the device information for the device i�d like to connect? For example how come do i know if the device info in the "DIP" structure belongs to the USB PEN i�d like to connect and not to any other USB device connected?
I searched all documentation (the online one) and could not find an example of how could i do such a thing.
Is there any way to do that?
Thanks in advance for any help, i�m really needing to have some clarification in this matter.
Miguel

well just a quick update, i changed the way of programing and stated using the /dev/usb/xxx.xxx/0 pipes and allready can get the device information.

Daily activity help for script... and investgating some issue

hi
i am new to apps.i fil i need some script to solve some daily activity issues and solving some issue.
can anyone help me or list of issue(s).I know it may different from site to site but i want very common list.so that issues could be resolved quickly.
regards

hsawwan wrote:
Hi,
invalid object lists and number.Query dba_objects for invalid objects and compile it either manually or via adadmin.yes. i know but i need to schedule this with scripts so that it will compile jar files,invld obj etc.
>
failing patches.Check the patch log file.
diagonostics failed patches.Check the patch log file as well as the workers log file.where is the worker logfile?
>
backup of archivelog and database.Test the backup periodically.how?
>
gathering statistics for apps and dadatabase users.Schedule "Gather Schema Statistics" concurrent program on regular basis.option is dbms_job right?
>
specific concurrent manager/log lists for specific requests.Check the CM log file along with the failed request log file.i notice FND<sum number>.log usually created for this but for specific log file is needed to query from db.for this reason i want to use some scripts.
>
shrinking apps tablespaces to utilise the spaces and enhancing the performance of apps.Shrinking tablespaces does not enhance performance.
may not enhance performance but may enhance the disk space.
See (Note: 122669.1 - How to Perform a Health Check on the Database).
monitoring alerts.
monitoring forms and report and generating trace files.You can do from OAM.
monitoring triggers Write an alert to notify you in case the status of the triggers changed.
startup total apps and shutdowns total apps (this actually sysadmins of clients want)Usually, we review the startup/shutdown scripts log files.
total cloning process within a night.You will have to review the log files.
Thanks,
Hussein

Help for : Recover datas (Photos and Video) afert ...

Hello
Do someone know how to recover my data ?, I already tried recovery file tools without success.
I make a hard reset, I was sure that hard reset don't delete Mass Storage.
But it's not the case, I lost all my photos, and my videos. For me the built in storage was exactly a same behavior as a external SdCard.
Thank you for your help.

Unfortunately it cannot be done, that's why it is always adviseable to backup/sync your phone on a regular basis ! Sorry
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Some help for a Qosmio F50 and Win 8 is needed

Hello,
I have an old Qosmio F50 and since it still has enough power to handle Windows 8 I decided to give it a try. What I did is a clean install of WIN 8 pro x64 and I used a mix of drivers from various Toshiba models and third parties. The results weren't bad since everything is working except for a little weird thing.
Specifically I used:
- Chipset drivers V,9.4.0.1022 straight from Intel.
- Toshiba's high definition processor driver v,1.0.2.71
- Enecir drivers v. 2.7.4.1
- Realtek High definition audio drivers R271
- Bluetooth stack v 8.00.12(T)
- Nvidia VGA drivers 320.49
- ALPS V8.x0.303.206 drivers for the touchpad
- Camera assistant software v 1.7.260.0526L (a bit unstable and the settings reset every now and then, but still functional. The newer camera application couldn't handle the old Chicony)
- Everything else that was provided by Windows Update.
And finally I used:
Toshiba function key 1.00.6626.06, Flash cards 1.51.8.2C (the b version).and SpecApp.exe (aka button support) v.1.3.3.64
The only problem I have is with the media touch-buttons. While they work as they should and I can remap them with the SpecApp.exe just fine, they do a crazy thing:
Sometimes together with the correct function the button will also open windows calculator which is pretty annoying. I tried many things including searching in the registry, but I couldn't find out how to solve this, so if anyone could help it would be great.
Other than this malfunction, everything else works just perfect including all the FN keys.
Thank you for reading and if you have any idea I'm all ears.

I guess you will not get an original Windows 8 driver to get the multimedia working in connection with the Windows 8 system because the Windows 8 isnt officially supported on Qosmio F50.
But as you got it working using the packages released for other Toshiba notebooks, I guess that the crazy button actions are related to the SpecApp.exe since this small app has been used in order to remap the buttons.
So probably you should remove this from the system and should use just an Toshiba Value Added Package released for other Toshiba series.
This is my personal opinion...

R12 - Help for Disabling of Home and Preferences links

Similar Messages

Maybe you are looking for