R12 rapidwiz questions

Hi
In the document Installation Guide: Using Rapid Install Release 12.1 (12.1.1) *(Part No. E12842-03)*
As part of the upgrade steps
1. The screenshot in page 3-8 shows that you need to provide a portlist
and
2. the screenshot in page 3-9 shows that you need to provide the ORACLE_SID and Oracle_HOME
3. The screenshot in page 3-10 shows that you need to provide the apps password of the existing database (ie the database which is not in R12 and needs to be upgraded to R12)
Can you please clarify how this works
if the portlist in point 1 and oracle_SID in point 2 is to be the existing instance
(else the inputs in screenshot in point 3 will not connect to the existing database right?)
How do we install the 11g RDBMS Oracle_home as part of the regular steps in rapidwiz (mentioned in chapter 3 of Installation Guide) without having to do rapidwiz -techstack
Also in case we want to do split-tier installation
(ie post-upgrade topology has db_tier is a separate server without applications node)
what are the steps?
Are they something on the below lines?
1. On db server
rapidwiz -techstack (Dbtier) on R12 software for platform_1
2. On application node
dummy run of rapidwiz (upgrade filesystem) on R12 software for platform_2
(remove the R12 home on application node using adgentns -removeserver)
Thanks
Cyril

Hi,
if the portlist in point 1 and oracle_SID in point 2 is to be the existing instance
(else the inputs in screenshot in point 3 will not connect to the existing database right?)These screen shots are for running RapidWiz as part of the upgrade (not a fresh installation), so you have to enter the value of the port pool, and ORACLE_SID of the existing 11i instance.
How do we install the 11g RDBMS Oracle_home as part of the regular steps in rapidwiz (mentioned in chapter 3 of Installation Guide) without having to do rapidwiz -techstackIf you want to install 11gR1 RDBMS or Application technology stack, then you will have to use "rapidwiz -techstack" option. Again, this is used as part of the upgrade and not for a fresh Oracle Apps R12 installation.
Also in case we want to do split-tier installation
(ie post-upgrade topology has db_tier is a separate server without applications node)
what are the steps?
Are they something on the below lines?
1. On db server
rapidwiz -techstack (Dbtier) on R12 software for platform_1Correct.
2. On application node
dummy run of rapidwiz (upgrade filesystem) on R12 software for platform_2
(remove the R12 home on application node using adgentns -removeserver)Why to remove the R12 home on the application tier? Are you referring to the database ORACLE_HOME in case you already have it running on this node? Please elaborate more.
Regards,
Hussein

Similar Messages

  • Is is okay to run R12 rapidwiz with upgrade option when 11i instance is up?

    Hello,
    Is it okay to run R12 rapidwiz with option "Upgrade oracle applications" while 11i DB/Apps are up and functional which is to lay down the R12 applications code tree as part of R12 pre-upgrade steps?
    Can you please clarify if running R12 Rapidwiz with upgrade option modifies anything at the database level and effects existing 11i system?
    Regards,
    AV

    user10728177 wrote:
    Thanks Hussein!! Can you also please tell if applying a patch in pre-install mode touches the database? If possible can you please explain me what exactly adpatch -preinstall does? I read oracle documentations about it but could not come to conclusion on it.
    Regards,
    AvPre-Install Mode
    http://docs.oracle.com/cd/E18727_01/doc.121/e12148/T531058T531062.htm#d0e1491
    Thanks,
    Hussein

  • Installation of R12: Basic questions from Installation Guide

    Hi ,
    I am new to Oracle R12 installation. I have few questions
    a) In the Install Oracle Applicatiions- Database Node, I want to install the database on : /u01/oracle/DEVP . Does this directory structure already need to be present or is it created part of the installation ? I am already having /u01 dir
    b) In the Install Oracle Applicatiions- Application Node,the inst directory : /u01/oracle/DEVP/inst . Does this directory structure already need to be present or is it created part of the installation ? I am already having /u01 dir
    Running RapidWiz
    The development is happening in Linux environment
    During development environment installation, we had unpacked the installation components (the staging dir) to a location which was essentially a mount point something like
    /mnt/XXX/XXX/StageR12/startCD/Disk1/rapidwiz
    For the new environment (test environment), Can I simply go to the mount point (In this case, /mnt/XXX/XXX/StageR12/startCD/Disk1/rapidwiz) and start rapidwiz. Or is it good to copy the entire staging directory to the server on which the installation will take place.
    Users
    I have created 2 OS users : oracle and applmgr .
    If I understand correctly the following user " applsys, sysadmin , system, apps created during R12 installation.
    Best Regards,
    brinda

    Hi,
    a) In the Install Oracle Applicatiions- Database Node, I want to install the database on : /u01/oracle/DEVP . Does this directory structure already need to be present or is it created part of the installation ? I am already having /u01 dirYou should not have any directory created as all the directories will be created by Rapid Install.
    b) In the Install Oracle Applicatiions- Application Node,the inst directory : /u01/oracle/DEVP/inst . Does this directory structure already need to be present or is it created part of the installation ? I am already having /u01 dirSame as above.
    Running RapidWiz
    The development is happening in Linux environment
    During development environment installation, we had unpacked the installation components (the staging dir) to a location which was essentially a mount point something like
    /mnt/XXX/XXX/StageR12/startCD/Disk1/rapidwiz
    For the new environment (test environment), Can I simply go to the mount point (In this case, /mnt/XXX/XXX/StageR12/startCD/Disk1/rapidwiz) and start rapidwiz. Or is it good to copy the entire staging directory to the server on which the installation will take place.You do not have to create a new stage area directory and you can use the same one already used before.
    Users
    I have created 2 OS users : oracle and applmgr .These two users will own the database and application tier files respectively, make sure you run Rapid Install as root user.
    If I understand correctly the following user " applsys, sysadmin , system, apps created during R12 installation.Correct. APPLSYS, APPS, and SYSTEM are database users, while SYSADMIN is an application user, and all these users will be created by Rapid Install.
    Regards,
    Hussein

  • R12 Rapidwiz Error

    Hi Hussein,
    I am using RHEL 5.3 for R12.1.1.1 Installation
    This is Ajaz Ahmed. Thanks for your timely help. I was using this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
    for Linux (32-bit) [ID 402310.1] to Install R 12.1.1.1. as per your reply and the recommended document I
    Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).. I started to install. Prior to that I completed
    all the pre-requisites. When running ./rapidwiz from the Stage12/startCD/Disk1/rapidwiz folder as a root user I get the following error.
    Exception in thread "main" java.lang.UnsatisfiedLinkError: /mnt/hgfs/Stage12/startCD/Disk1/rapidwiz/jre/Linux/1.6.0/lib/i386/xawt/libmawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.load0(Unknown Source)
    at java.lang.System.load(Unknown Source)
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(Unknown Source)
    at java.lang.ClassLoader.loadLibrary(Unknown Source)
    at java.lang.Runtime.loadLibrary0(Unknown Source)
    at java.lang.System.loadLibrary(Unknown Source)
    at sun.security.action.LoadLibraryAction.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
    at sun.awt.DebugHelper.<clinit>(Unknown Source)
    at java.awt.Component.<clinit>(Unknown Source)
    I am not able to proceed further. What can be the issue this time.
    Best Regards
    Ajaz Apps
    Ajaz Ahmed
    9967890118
    Mumbai
    e-mail : [email protected]
    [email protected]

    Hi Hussein,
    Earlier I was Installing with this Document Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4)
    for Linux (32-bit) [ID 402310.1]. Error Rectified.
    As per your suggestion I installed the R 12.1.1.1. using Red Het Entp. Linux 5.3 using the recommended document
    Note: 761564.1 - Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86).
    As per Note: 761564.1 document also I got the same error
    The installation is completed after all the 5 steps. During the post install task
    For the system checks there were errors in
    RHEL 5.3 Errors
    1) HTTP
    checking URL = http://r12vis.apps12.com:8000
    RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    2) Virtual Directory
    RW-50015: Error: - Http Server Virtual Directories is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    3) Login Page
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
    RW-50016: Error: - {0} was not created:
    File = {1}
    4) Help Page
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/help
    RW-50015: Error: - Help Page is not responding. The service might not have started on the port yet. Please check the service and use the retry button.
    5) JSP
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding
    From the other terminal window I stopped and restarted all the appstier services.
    There after during the retry option of installation for system checks only two errors
    Remained which are
    1) JSP
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/jtfTestCookie.jsp
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding, waiting 15 seconds and retesting.
    JSP is not responding
    2) Login Page
    checking URL = http://r12vis.apps12.com:8000/OA_HTML/AppsLogin
    RW-50016: Error: - {0} was not created:
    File = {1}
    When I click next button I get the following message
    RW-10001 – RapidWizard Install had detected that your configuration has errors
    You must resolves these issues before continuing
    As no other alternative left I press the cancel button.
    After bouncing the linux service I started the DB Tier and Apps tier, but again I face the same problem of JSP and Login Page.
    I logged on to application as applmgr and thru the path
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/bin
    I run the ./opmnctl status command which gave me the error
    Unable to connect to opmn.
    Opmn may not be up.
    So I started the services using
    ./opmnctl startall
    opmnctl: starting opmn and all managed processes...
    GETHOSTBYNAME(ap6004bld.us.oracle.com): 2
    ================================================================================
    opmn id=r12vis.apps.com:6001
    0 of 3 processes started.
    ias-instance id=APPS_C_HOME.ap6004bld.us.oracle.com
    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
    Error
    --> Process (pid=7473)
    failed to start a managed process after the maximum retry limit
    Log:
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/HTTP_Server~1
    ias-component/process-type/process-set:
    WebCache/WebCache/WebCache
    Error
    --> Process (pid=7472)
    failed to start a managed process after the maximum retry limit
    Log:
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCache~1
    ias-component/process-type/process-set:
    WebCache/WebCacheAdmin/WebCacheAdmin
    Error
    --> Process (pid=7466)
    failed to start a managed process after the maximum retry limit
    Log:
    /d01/oracle/VIS/apps/tech_st/10.1.2/opmn/logs/WebCache~WebCacheAdmin~1
    After that I stopped the Apps tier. Logged in sys ‘as/sysdba’ and unlocked the apps account.
    Started the Apps tier. But again I was not able to login.
    After that I stopped the Apps tier, keeping the DB Tier ip. And run the Autoconfig from Apps Tier path /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/scripts
    sh adautocfg.sh
    I get the error as AutoConfig completed with errors.
    /d02/oas/oracle/OASDB/db/tech_st/10.2.0/appsutil/log/OASDB_testappsdb/06300116/adconfig.log
    Enter the APPS user password:
    The log file for this session is located at: /d01/oracle/VIS/inst/apps/VIS_r12vis/admin/log/06300418/adconfig.log
    AutoConfig is configuring the Applications environment...
    AutoConfig will consider the custom templates if present.
    Using CONFIG_HOME location : /d01/oracle/VIS/inst/apps/VIS_r12vis
    Classpath : /d01/oracle/VIS/apps/apps_st/comn/java/lib/appsborg2.zip:/d01/oracle/VIS/apps/apps_st/comn/java/classes
    Using Context file : /d01/oracle/VIS/inst/apps/VIS_r12vis/appl/admin/VIS_r12vis.xml
    Context Value Management will now update the Context file
    Updating Context file...COMPLETED
    Attempting upload of Context file and templates to database...COMPLETED
    Configuring templates from all of the product tops...
    Configuring AD_TOP........COMPLETED
    Configuring FND_TOP.......COMPLETED
    Configuring ICX_TOP.......COMPLETED
    Configuring MSC_TOP.......COMPLETED
    Configuring IEO_TOP.......COMPLETED
    Configuring BIS_TOP.......COMPLETED
    Configuring AMS_TOP.......COMPLETED
    Configuring CCT_TOP.......COMPLETED
    Configuring WSH_TOP.......COMPLETED
    Configuring CLN_TOP.......COMPLETED
    Configuring OKE_TOP.......COMPLETED
    Configuring OKL_TOP.......COMPLETED
    Configuring OKS_TOP.......COMPLETED
    Configuring CSF_TOP.......COMPLETED
    Configuring IGS_TOP.......COMPLETED
    Configuring IBY_TOP.......COMPLETED
    Configuring JTF_TOP.......COMPLETED
    Configuring MWA_TOP.......COMPLETED
    Configuring CN_TOP........COMPLETED
    Configuring CSI_TOP.......COMPLETED
    Configuring WIP_TOP.......COMPLETED
    Configuring CSE_TOP.......COMPLETED
    Configuring EAM_TOP.......COMPLETED
    Configuring FTE_TOP.......COMPLETED
    Configuring ONT_TOP.......COMPLETED
    Configuring AR_TOP........COMPLETED
    Configuring AHL_TOP.......COMPLETED
    Configuring OZF_TOP.......COMPLETED
    Configuring IES_TOP.......COMPLETED
    Configuring CSD_TOP.......COMPLETED
    Configuring IGC_TOP.......COMPLETED
    AutoConfig completed with errors.
    The E-Business Home Page is located at http://r12vis.apps.com:8000/OA_HTML/AppsLogin
    If your browser doesn't automatically redirect to its new location, click here.
    what can be the other possibility ? shall I try with Red Hat Entp. Linux 4 (32-Bit) ?
    If you have some other documents please send me on my mail-id's.
    Regards
    Ajaz Ahmed
    9967890118
    Mumbai
    e-mail : [email protected]
    [email protected]

  • 11i to R12 Upgrade questions

    Dear Gurus,
    We are planning to upgrade from 11.5.10 to R12 in that regards I have the following questions:
    1.     Which version on R12 do you recommend for the upgrade, we are planning to go for 12.0.4 ?
    2.     Currently we are on 11i (11.5.10.2) with database version 10gR2 (10.2.0.4), is it certified by R12 (12.0.4), our OS is Linux hrmstest 2.6.9-5.ELsmp #1 SMP Wed Jan 5 19:30:39 EST 2005 i686 i686 i386 GNU/Linux
    3.     We are also planning to move to 64-bits of OS and Server as currently our Hardware is 64-Bits, but we have installed 32-Bits OS. So can you please advice what will be right path to move from 32-Bits to 64-Bits ?
    Thanks & Regards
    Kiran Rana

    Hi;
    Please follow previous thread which is below and notes from metalink. You can find your answe in those post and notes
    How to upgrade the EBS from 11.5.10.2 to R12?
    http://forums.oracle.com/forums/thread.jspa?messageID=2029986
    Apps Upgrade to rel 12i
    http://forums.oracle.com/forums/thread.jspa?threadID=610452
    Note: 454384.1 - Oracle 10gR2 Database Preparation Guidelines for an E-Business Suite Release 12 Upgrade
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=454384.1
    Note: 401740.1 - Release 12 Information Center
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=401740.1
    Note: 473119.1 - Now Available: Oracle E-Business Suite 12.0.4 Release Update Pack (RUP4)
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=473119.1
    Best Practices for Upgrading to Release 12
    http://blogs.oracle.com/schan/2007/11/29#a2268
    Regard
    Helios

  • EBS R12 Rapidwiz install

    Hi,
    I have installed EBS R12 using rapidwiz (on 1-node only, both apps and db are on the same server). Does it alow 2-node split set-up too? (1 sever for apps tier and 1 server for db tier).
    Please give me doc links for split config install.
    Thanks

    (by the way, by saying split i understand it uses two servers, one for the apps tier and one for the db tier, right?)This is called Multi-node installation. When the application and database tiers run on different nodes with different OS, then it is called split configuration.
    Option A: I want to split the current node to other nodes, both servers with the same OS (Windows 2003 or linux). Use Rapid Clone.
    Option B: I want to split by moving out the apps tier to another server (pls give me metalink note for this)Use Rapid Clone.
    Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=406982.1
    Option C: I want to split the current node to two different OS. (one windows and one linux) (pls give me metalink note for this)To migrate the application tier to Linux, check the following note:
    Note: 438086.1 - Platform Migration with Oracle Applications Release 12
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=438086.1
    To migrate the database from one OS to different OS, then you need to use export/import.
    I am just confused with all the metalink notes that handles this different process. Are they all uses the theory of cloning?If the source and target nodes are binary compatible, then you can use Rapid Clone.
    What I mean is you can run it one time where it can detect and access two servers to configure at the same time, the apps-tier node/server and the db-tier node/server.Again, if the OS is the same then this is called Multi-node installation, and RapidWiz supports this.
    Or what it can do is to run it twice, the first is install apps tier on server1 and run it again to install the db-tier on the server2.
    Then you register the db tier to the apps tier. Is this correct? You run RapidWiz on the database tier, then on the application tier. You do not have to register any tier.
    I am really confused with a lots of possibilities or combinations of setting up EBS Oracle Apps. It too challenging :) Please feel free to ask :)

  • MW R12 upgrade questions

    Hi Folks,
    Just installed MW 2.17 and would like to a upgrade our E-Business from 11.5.10.2 to 12.1.3. I prepared a project which uses the Upgrade Assistant R12. I believe it plans to upgrade our application from 11.5.10.2 to 12.1.1. If that's the case, how can I prepare MW to upgrade the R12 (12.1.1) application to 12.1.3. Should I use 'maintenance pack assistant R12' or 'release upgrade assistant R12' or should I customize the R12 upgrade project to upgrade the application to 12.1.3 after upgrading to 12.1.1.
    Besides, when I am in 'Define Nodes' page, I see column 'Main Upgrade from' is '11.5.10.2', 'Main upgade to' is '12', but nothing in columns 'Other Upgrade from' and 'Other Update to'. Could some one tell me what these two columns ('Other Upgrade from' and 'Other Update to') for.
    Thanks,
    Derek

    Derek,
    Version 2.17 of MW will take you from 11.5.10 to 12.1.1 using the Upgrade Assistant 12 product.
    We are in the process of updating the RUP12 product to then take you from 12.1.1 to 12.1.2. This, however, has not been released yet, and does not even have a tentative date, although I do feel it will be in calendar year 2010! 12.1.3 is on the horizon, but not currently being worked on yet, as it is so new.
    If 12.1.3 is your ultimate goal, I suggest you use the MW to upgrade to 12.1.1 and then manually apply the RUP to 12.1.3. (Alternatively, you could add the steps as custom into your MW project as you suggested, if you like.)
    Hope this helps,
    -Vikki

  • R12 Upgrade questions...

    Does it mandatory Mutli org enabled before upgrade R12
    upgrade patch failing with following error
    Do you want to run AutoPatch with these actions turned off [Yes] ? yes
    Completed: file QPXDUPLA.sql on worker 2 for product qp username QP.
    FAILED: file funmochk.sql on worker 6 for product fun username FUN.
    Deferred: file funmochk.sql on worker 6 for product fun username FUN. (Deferment number 2 for this job)
    There are now 107575 jobs remaining (current phase=A0):
    6 running, 0 ready to run and 107569 waiting.
    here are now 106722 jobs remaining (current phase=A4):
    0 running, 0 ready to run and 106722 waiting.
    ATTENTION: All workers either have failed or are waiting:
    FAILED: file pechktsk.sql on worker 2.
    ATTENTION: Please fix the above failed worker(s) so the manager can continue.
    AutoPatch error:
    The following ORACLE error:
    for above issue , we need to apply patches(
    Does it mandatory move OATM before upgrade to R12( we are planing to upgrade OATM after R12 ugprade)

    [applmgr@unicos log]$ cat adwork001.log
    ************* Start of AD Worker session *************
    AD Worker version: 11.5.0
    AD Worker started at: Sun Apr 03 2011 10:16:12
    APPL_TOP is set to /data/oracle/apps/prodappl
    Worker id = 1
    Started by: adpatch
    NLS_LANG value from the environment is : AMERICAN_AMERICA.US7ASCII
    NLS_LANG value for this AD utility run is : AMERICAN_AMERICA.US7ASCII
    Connecting to SYSTEM......Connected successfully.
    Already asked for the ORACLE username and password
    of Application Object Library.
    (The given username/password was: APPLSYS/*****)
    Connecting to APPLSYS......Connected successfully.
    The status of various features in this run of AD Worker is:
    <-Feature version in->
    Feature Active? APPLTOP Data model Flags
    CHECKFILE Yes 1 1 Y N N Y N Y
    PREREQ Yes 6 6 Y N N Y N Y
    CONCURRENT_SESSIONS No 2 2 Y Y N Y Y N
    PATCH_TIMING Yes 2 2 Y N N Y N Y
    PATCH_HIST_IN_DB Yes 6 6 Y N N Y N Y
    SCHEMA_SWAP Yes 1 1 Y N N Y Y Y
    CODELEVEL No -1 1 N N N N Y Y
    JAVA_WORKER No -1 1 N N N N Y Y
    Reading product information from file...
    Reading language and territory information from file...
    Reading language information from applUS.txt ...
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/ipmprod.txt
    does not exist for product "ipm".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/izuprod.txt
    does not exist for product "izu".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/dnaprod.txt
    does not exist for product "dna".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/itaprod.txt
    does not exist for product "ita".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/pftprod.txt
    does not exist for product "pft".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/ftpprod.txt
    does not exist for product "ftp".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/gmoprod.txt
    does not exist for product "gmo".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/ibwprod.txt
    does not exist for product "ibw".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/qprprod.txt
    does not exist for product "qpr".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/rrsprod.txt
    does not exist for product "rrs".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/jmfprod.txt
    does not exist for product "jmf".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/ircprod.txt
    does not exist for product "irc".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/ameprod.txt
    does not exist for product "ame".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/dppprod.txt
    does not exist for product "dpp".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/mthprod.txt
    does not exist for product "mth".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/ddrprod.txt
    does not exist for product "ddr".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    AD Worker warning:
    Product Data File
    /data/oracle/apps/prodappl/admin/inlprod.txt
    does not exist for product "inl".
    This product is registered in the database but the
    above file does not exist in APPL_TOP. The product
    will be ignored without error.
    Currently, the following language is installed:
    Code Language Status
    US American English Base
    Your base language will be AMERICAN.
    Connecting to SYSTEM......Connected successfully.
    Connecting to APPLSYS......Connected successfully.
    Connecting to APPS......Connected successfully.
    Connecting to APPLSYS......Connected successfully.
    Connecting to APPS......Connected successfully.
    Reading jobs to run from restart file.
    Completed reading the to-do restart file. Ready to run jobs.
    Setting parallel context: PARALLEL AUTOPATCH AT R115
    Time when worker started job: Sun Apr 03 2011 10:16:31
    AD Worker error:
    Unable to find release information for product 'fnd' version 12.0.0
    Time when worker failed: Sun Apr 03 2011 10:16:31
    Time when worker started job: Sun Apr 03 2011 10:16:33
    AD Worker error:
    Unable to find release information for product 'fnd' version 12.0.0
    Time when worker failed: Sun Apr 03 2011 10:16:33
    Time when worker started job: Sun Apr 03 2011 10:16:33
    AD Worker error:
    Unable to find release information for product 'fnd' version 12.0.0
    Time when worker failed: Sun Apr 03 2011 10:16:33
    [applmgr@unicos log]$

  • Database Install (R12) Rapidwiz

    Hi All,
    Is there a way on how will I install database only (database techstack) using rapidwiz? Is this possible?
    Thanks and regards,
    Chester

    cmadiam82 wrote:
    Hi All,
    Is there a way on how will I install database only (database techstack) using rapidwiz? Is this possible?
    Thanks and regards,
    ChesterOracle E-Business Suite Installation Guide: Using Rapid Install - Chapter 4, Installing Technology Stack Components
    http://docs.oracle.com/cd/B53825_08/current/acrobat/121oaig.pdf
    Thanks,
    Hussein

  • R12 Rapidwiz postinstall step Http, Login page, Virtual dirve

    Hi,
    I have downloaded EBS R 12.1.1 from edelivery.oracle.com. I am facing post install errors. i have applied all the required rpms mentioned in the Note 414414.1 .The rpms mentioned in the document refer to 12.0.1. Is anybody facing similar problem and found a solution please reply.
    Thanks a million

    Hi
    when i start the installation i am getting the following error what and where could be the problem pls help
    *[oracle@orappl StageR12]$ Xlib: connection to ": 0.0" refused by server*
    Xlib: No protocol specified
    Exception in thread "main" java.lang.InternalError: Can't connect to X11 window server using ': 0.0' as the value of the DISPLAY variable.
    at sun.awt.X11GraphicsEnvironment.initDisplay(Native Method)
    at sun.awt.X11GraphicsEnvironment.access$100(Unknown Source)
    at sun.awt.X11GraphicsEnvironment$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.awt.X11GraphicsEnvironment.<clinit>(Unknown Source)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Unknown Source)
    at java.awt.GraphicsEnvironment.getLocalGraphicsEnvironment(Unknown Source)
    at java.awt.Window.init(Unknown Source)
    at java.awt.Window.<init>(Unknown Source)
    at java.awt.Frame.<init>(Unknown Source)
    at java.awt.Frame.<init>(Unknown Source)
    at oracle.ewt.popup.PopupFrame.<init>(Unknown Source)
    at oracle.ewt.lwAWT.BufferedFrame.<init>(Unknown Source)
    at oracle.apps.ad.rapidwiz.RIWizard.main(RIWizard.java:1427)
    Edited by: Farting Master on Feb 9, 2010 2:38 AM

  • R12 Rapidwiz postinstall step Http, Login page, Virtual directory, JSP, Hel

    Please let me know how to execute the below steps:
    Temporary workaround
    Remove the parameter -DSSL in the ohs_start() function as follows:
    $/ora/10.1.3/Apache/Apache/bin/apachectl:
    $ diff apachectl.original apachectl.hacked
    129c129,130
    eval ohs_start -DSSL "$args"---
    # eval ohs_start -DSSL "$args"
    eval ohs_start "$args"Restart Apache.
    Thanks,
    Sai

    Not sure where you want to add exactly,can you be more specific.
    i checked in my environment, i found nothing inside the file.
    # This file is automatically generated by AutoConfig. It will be read and
    # overwritten. If you were instructed to edit this file, or if you are not
    # able to use the settings created by AutoConfig, refer to Metalink Note
    # 387859.1 for assistance.
    $ORACLE_CONFIG_HOME/Apache/Apache/bin/apachectl $*
    exit
    ~
    ~
    Edited by: Amigo on Dec 22, 2010 6:56 PM

  • R12 Migration questions..

    Hi,
    currently our customer using windows-32 bit--->R1211 and now thinking to move other OS or Windows-64 bit,can any body give me some idea or difference between windows 64 or Linux 64 bit....

    Hi;
    currently our customer using windows-32 bit--->R1211 and now thinking to move other OS or Windows-64 bit,can any body give me some idea or difference between windows 64 or Linux 64 bit....Its totaly diffent OS. Personaly I strongly strongly suggest to use linux os instead of OS.. A lot more managable&flexable&safe&understandable.
    Use search mechanisim we had some discussion about this topic
    Regard
    Helios

  • 11.5.10 to r12.1 upgrade, TCA issues/questions

    This is a fairly "advanced" r12 TCA question for the experts:
    We are upgrading from EBS 11.5.10 to r12.
    We also have a separate instance of EBS 11.5.10 in which we use "Oracle Customers Online" for our "CDH" (Customer Data Hub) that sends (spokes) party data to multiple subscribing systems. We are going to absorb this CDH instance into the upgraded r12 environment.
    The r12 TCA upgrade takes all suppliers and creates NEW TCA structures for them (parties, sites, contacts, etc). Many of the suppliers overlap our customer parties in the real world (suppliers who are also customers). Additionally, these suppliers/customers have also been spoked to many other systems with the supplier segment1 + vendor_site_codes (same as our customer party_number/party_site_numbers).
    1. We thought of merging the customers into the suppliers and then editing party_number/party_site_number to be the same as the original segment1 / vendor site_code, but ran into the following issues, of which the first below is most important:
    -- r12 Upgrade makes ALL suppliers (regardless of vendor_type_lookup_code) into Party_Type 'ORGANIZATION', which cannot be merged with Customer Party_Type 'PERSON' parties....
    -- Party site merges will not work if we don't have the EB Tax Geography MASTER_REF country/state/county/city/postal_code's defined for the hz_locations.
    The party type issue above is important for existing data but also for new suppliers. PERSONs will never be able to merged in the future, between Suppliers and Customers in either direction.
    For the sake of getting all these parties de-duped into single parties, I changed some of the supplier ORGANIZATION party_types to PERSON (and hence I also created an hz_person_profiles record using TCA api's). But after doing this, when we update the supplier through iSupplier Portal, it updates the underlying party_type back to ORGANIZATION. If I were to make this change, then merge PERSON customers into these Suppliers, and then a user updates the supplier data, then the whole party will get updated from PERSON to ORGANIZATION, which I think would be bad for our customer processing (and other modules in other spoke systems subscribing to party create/update events).
    Also, if we are forced to leave suppliers separate from customers in case of PERSON entities, then I will especially have trouble trying to send a complete party definition to subscribing systems, since there are 2 parties instead of where there should be 1.
    Any ideas about how to overcome this issue with r12 Suppliers integration with TCA ?
    Thanks in advance!

    Hello
    We are about to undertake a similar upgrade - can you let me know how you overcame this issue please?
    Thanks

  • JSP is not responding ;RW-50016: Error: - {0} was not created:

    hello
    I met two questions when the post-install chek
    first question:
    checking URL = http://xxx.com:8000/OA_HTML/jtfTestCookie.jsp
    JSP is not responding, waiting 15 seconds and retesting.
    second question:
    checking URL = http://xxx.com:8000/OA_HTML/AppsLogin
    RW-50016: Error: - {0} was not created:
    File = {1}
    thanks for help

    But you have posted in "Technology - LCM: 11i Install/Upgrade" forum. Anyway, please see these docs.
    On R 12.1.1 Fresh Installation, POST RAPIDWIZ INSTALL CHECKS FAILS , Rapidwiz Ends With Error Jsp, Virtual Directory And Login Page Does Not Work RW-50016: Error: - {0} was not created: [ID 850264.1]
    Rapidwiz RW-50016: Error: - {0} was not created [ID 559402.1]
    R12 Rapidwiz Fails on Post Installation Tasks : RW-50016, Timed Out( 100000 ) [ID 437152.1]
    R12 Login Issue on Target After Cloning ,Fresh Install Or Upgrade [ID 435550.1]
    Thanks,
    Hussein

  • Installing Arabic Language in CC&B

    Hi Guys
    When i am trying to Apply the Arabic Patch i am beeing asked the below Questions
    and i am confused at the 4th and the 5th Question
    These are the file you get once you unzip the patch (Init,Init.Inp,Upgrade,OraSDUpg)
    Question: what is the file name from the above is to be given as input to Question 4
    Question: what is the file name from the above is to be given as input to Question 5
    Prompts after Running OraSDUpg
    1.Enter the username that owns the CDX schema (e.g. CISADM): CISADM
    2.Enter the password for the CDX schema owner:
    3.Enter the name of the Oracle Database: TEST
    4.Enter the name of input Blueprint file:
    5.Enter the name of input upgrade rule file:
    User Name : CISADM
    Password :
    Database Name : TEST
    Enter the name of input Blueprint file: ?????????? Dono what is to be entered here
    Enter the name of input upgrade rule file : ?????????? Dono what is to be entered here
    Thanks
    Aleem

    Muneer,
    1. When I go to OAM > License Manager > Reports : The only licenses language is US English. Does not show Arabic at all. I had to manually do it using License Manager.You have to add Arabic from OAM.
    2. There are no AR directories installed in APPL_TOP for any of the product components e.g. forms folder.This is an expected behavior as the AR directories will be created when you run the NLS patch (in R12, RapidWiz does not create AR directories, unlike 11i).
    I wonder what does Rapid Install actually do when we select additional language during the installation.Nothing much, as most of the steps need to be implemented once you are done with the installation.
    Thanks,
    Hussein

Maybe you are looking for