R12 Single node to Multi-node Configuration

Hi All!
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.
Thanks and Regards,
cmadiam82

Hi,
We have a single node setup (Applications and Database are on the same server). Now, our management decided to setup a Multi-node configuration and i'm the one who will do this.Contratulations. This is a good oppurtunity.
The plan is to use Oracle ASM and RAC for the database and for the Application is to have a multiple application servers. For the database, we will be using a minimum of 3 servers and another 3 servers for the application. Is this possible? How can this be done. Can someone point or give some link or infos on how to do this. We're going to use the existing data on the single node server.For a start you can read
http://gjilevski.wordpress.com/2009/12/13/rac-enabling-ebs-12-1-1/
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=52&MMN_position=44:44
http://www.appsdba.info/index.php?module=pagemaster&PAGE_user_op=view_page&PAGE_id=61&MMN_position=57:57
Thanks

Similar Messages

How to run all Concurrent Requests in a single node in a multi node env

DB;11.1.0.7
Oracle Apps:12.1.1
OS:Linux 86x64 Red Hat
PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?
Thanks for your time!
Regards,

PCP setting is enabled.
Load Balancer is enabled.
APPLDCP=ON
Could anyone please share - How to run all Concurrent Requests in a single node in a multi node env where there are 3 web tier nodes?Concurrent requests will be processed by the CM nodes and it has nothing to do with the 3 web tier nodes you have.
If you mean the database instance, then please see these docs.
How to run a concurrent program against a specific RAC instance with PCP/RAC setup? [ID 1129203.1]
In A PCP/RAC Configuration, How To Find Out On Which RAC Instance FNDSM Is Currently Running? [ID 1089396.1]
Thanks,
Hussein

Clone multi-node RAC and ASM to single node

Hi everyone.
I need clone system with 3 application server and 2 oracle database RAC and ASM to single-node. The operating system is RHEL 5.
I see some metalink notes, but we can't found nothing. I find notes with multi-node to single-node, but nothing with RAC to non-RAC.
The eBS version is 11.5.10.2 and database version is 10.2.0.3
Is possible this clone?
Thanks very much.

Hi User;
Please follow below and see its helpful:
EBS R12 with RAC and non-RAC
Re: RAC to single instance ebs R12
Re: Clone Oracle Apps 11.5.10.2 RacDB to Non-RAC DB
Re: CLONING R12 RAC to NON RAC CLONING giving error RMAN-05517 temporary file
[b]Migrating the DB-Tier (DB and CM) to Two node non RAC cluster[/b]
Also check:
http://www.oracle.com/technology/pub/articles/chan_sing2rac_install.html
Regard
Helios

Migrating from single-node to multi-node (2 Node)

Hi,
We have decided to migrate our existing 11.5.9 application from single-node to 2 Node(multi-node). Please let me know what services should reside on each node (Recommended by Oracle).
Forms, Reports, Apache on one node and CM, Admin, DB on another ?
(or)
DB on one node and all other on another node ?
And please let me know the steps I should follow to achieve the task as well.
Thank & Regards,
Abdullah

Hi;
I suggest please review our previous posts and check notes:
shared appltop/distributed appltop
Re: two nodes
In R12 shared appltop/distributed appltop
shared appltop -Which node
Re: shared appltop
Shared appltop in R12
Shared appltop in R12
shared APPL TOP or shared application
shared APPL TOP or shared application
Regard
Helios

How to do data migration between single node and multi node HANA systems ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Data migration between single node and multi node HANA systems ?
What are limitations ?
What should be the best practices ?

Migrate Single Node 10g STreams to Multi Node RAC

We are currently running 10g STreams. One capture process enqueing LCR into one queue. Propagation job dequeues messages and propagates them to a Destination queue. Then our Apply process at Destination database dequeues and apply changes.
We have developed a single shell script STREAMSsetup.sh that does all the magic on setting up streams (capture, apply, propagator and the table queues.)
Now, we are in the process of designing our new Horizontal architecture with Oracle RAC. We envision it is going to be a Data Guard Migration from Single node to the RAC environment.
My question is, can we just let Data Guard takes care of that, expecting all Streams pieces will be in place within the RAC environment? OR do you recomment we remove all streams configuration and re-run our magic script STREAMSsetup.sh to set everything up again once migrated to the RAC environment. ???
I now Streams follows an Instance Owner rule when it comes to where Capture or Apply will be started or stoped.
I would appreciate if someone have had any experience with this type of migration provide any feedback.
Thanks,
Arqui

Yes, we are opening an SR. Everything is pointing into the direction of recreating Streams configuration from RAC/ASM environment once migrated, using the instance with the lowest Instance number in the Cluster. That instance will be registered as the Primary instance owner of the Buffer queue. If primary instance fails queue ownership is transferred automatically to the next instance in the cluster and capture is started automatically in the other node.
Thanks,
ARqui

Migrate Single Node 11.5.10.2 --- to --- Clustered Multi Node

Dear All
I have a project to migrate a single node 11i EBS to Clustered Multi-node
& I opened Thread under (Forum Home » E-Business Suite » Technology - LCM: 11i Install/Upgrade)
the URL is
Migrate Single Node 11.5.10.2 --->> to --->>> Clustered Multi Node
Please if you can help me updating that thread with your answers.
Best regards
Naji ghanim
Apps DBA
TAGITI

Dear All
I have a project to migrate a single node 11i EBS to Clustered Multi-node
& I opened Thread under (Forum Home » E-Business Suite » Technology - LCM: 11i Install/Upgrade)
the URL is
Migrate Single Node 11.5.10.2 --->> to --->>> Clustered Multi Node
Please if you can help me updating that thread with your answers.
Best regards
Naji ghanim
Apps DBA
TAGITI

Can we change the UCCX server from single node to the first node without affecting it's configurations

Hi all,
Firstly I was using the single CUCM7.0 server with the single UCCX 7.0 server. Now I am going to add the second CUCM and UCCX in the cluster. I was first configured the UCCX server as a single node. Now I have to configure this as a first node. How I could configure this from single node to the first node without affecting it's configurations..??????
Regards
Ali Raza

Hi Aaron,
How could we do the change on Imhost file. How we add the both servers in that file?
Below is the Imhost file txt.
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample LMHOSTS file used by the Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to computernames
# (NetBIOS) names. Each entry should be kept on an individual line.
# The IP address should be placed in the first column followed by the
# corresponding computername. The address and the computername
# should be separated by at least one space or tab. The "#" character
# is generally used to denote the start of a comment (see the exceptions
# below).
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#      #PRE
#      #DOM:
#      #INCLUDE
#      #BEGIN_ALTERNATE
#      #END_ALTERNATE
#      \0xnn (non-printing character support)
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
# Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmanserver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
# The following example illustrates all of these extensions:
# 102.54.94.97     rhino         #PRE #DOM:networking #net group's DC
# 102.54.94.102    "appname \0x14"                    #special app server
# 102.54.94.123    popular            #PRE             #source server
# 102.54.94.117    localsrv           #PRE             #needed for the include
# #BEGIN_ALTERNATE
# #INCLUDE \\localsrv\public\lmhosts
# #INCLUDE \\rhino\public\lmhosts
# #END_ALTERNATE
# In the above example, the "appname" server contains a special
# character in its name, the "popular" and "localsrv" server names are
# preloaded, and the "rhino" server name is specified so it can be used
# to later #INCLUDE a centrally maintained lmhosts file if the "localsrv"
# system is unavailable.
# Note that the whole file is parsed including comments on each lookup,
# so keeping the number of comments to a minimum will improve performance.
# Therefore it is not advisable to simply add lmhosts file entries onto the
# end of this file.
Regards
Ali Raza

How to switch production single node EBS environment to multi node?

We're considering moving our production EBS environment from single node to multi node to separate out the middle processing from the database. We've completed the steps via clone (adcfgclone.pl) in out test environment and are now testing, however we're leery of running the same process in production. I've researched this process greatly, but most links point to either multi to single or cloning. Please assist.

Use Rapid Clone -- Rapid Clone Documentation Resources For Release 11i and 12 [ID 799735.1]
All the steps are covered under "Cloning a Single-Node System to a Multi-Node System" section.
Thanks,
Hussein

Convert single node Multi Node

We have one requirement, our single node is running on sun server ( 11.5.10.2 with 9.2.0.7)
we want to convert the single node to 2 node, like this
Node 1 = DB + CM + ADMIN
Node 2 = FORMS, WEB
I want to follow the following procedure
(a) Copy the Total Application Tier File system from single node to Node 2
(b) Run the config clone on Node 1 and specify to run the services CM and ADMIN only on this node
(c) Run the config clone on Node 2 and specify to run Forms, web services only on this node 2
is the above procedure correct?

Node 1 = DB + CM + ADMIN
Node 2 = FORMS, WEB
I want to follow the following procedure
(a) Copy the Total Application Tier File system from single node to Node 2
(b) Run the config clone on Node 1 and specify to run the services CM and ADMIN only on this node
(c) Run the config clone on Node 2 and specify to run Forms, web services only on this node 2It is correct.

R12 two node installation

Hi All,
I have to do two node R12 installation, please guide me how to procede because I could not see any option like "Sinlge node " and "Mult node" as it was in 11i, I want to have my database on one server and my application on second server
Regds

Hi
I am new to Oracle E-business suite. I am trying to install R12 on single node/sincgle user istall on Linux 32bit. I followed the Oracle Doc ID:4012310.1 and follwoing the instructions from http://download-east.oracle.com/docs/cd/B40089_09/current/acrobat/120oaig.pdf.
I created stage area by extracting the files downloaded from Oracle edelivery site.
Created user "Oracle" and gave permissions to access stageR12 directory.
Logged in as Oracle and try to run ./rapidwiz throws the follwoing error:
Rapid Install wizard is validating your filesystem.....
4 DVD labels found
Rapid install wizard will now launch the java interface .....
[oracle@localhost rapidwiz]$ Exceprion in the thread "main" java.lang.noclassdeffounderror:
Orcle/apps/ad/util/logfile
at oracle.apps.as.rapidwiz.RIWizard.main(RIWIZard.java.1419)
Please help
Thanks
Raj

9ir2 Single Node RAC + RH80

Hi all.
I'm triying to install a single node RAC based in the single node rac for linux document in the metalink.
The document was made based in a oracle 9iR1 database an RH71, I have followed the steps and i have a working kernel made by my own, the raw devices, and softdog hacked for being testing only. But the service does not go up.
I don't know if someone have made a single node rac instalation and can help me to choose the right pieces.
I don't have a RHAS2.1 but I do have a UnitedLinux 1.0 Server Patched.
I want to try the RAC tech but here (ecuador-sudamerica) is dificult to find firewire cards and disks so I´m working around a single node instalation.
Any help will be apreciate.
Fernando

Hi
Database version and GI versions are 11.2.0.2.2. And these are not multinode RAC configuration at any given time only single instance will be there for any given database. Some thing like ACTIVE and PASSIVE in hardware clusters such are VCS (Veritas Clusters).
I agree with you failover sinario in multi node (2 or more) RAC environments. In single node clustering only one instance will be there, like services in multinode, here whole instance will be re created on available nodes.
Hi
Database version and GI versions are 11.2.0.2.2. And these are not multi node RAC configuration at any given time only single instance will be there for any given database. Some thing like ACTIVE and PASSIVE in hardware clusters such are VCS (VERITAS Clusters).
I agree with you failover scenario in multi node (2 or more) RAC environments. In single node clustering only one instance will be there, like services in multi node, here whole instance will be re created on available nodes.
Thanks,
Thanks,

Install RAC OBS on single node using VMWare

Re: How to install Muti_node R12 using VMWARE
Mine is a little different.
I have the Test server which has OEL5 and one OAS 10g(Oracle application Server) with 10g database.
I want to install RAC OBS on this server by installing VMWare for the single node. I do not want to wipe out the OAS, reinstore OSL5 and start from a blank machine.
Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?

Hi,
Can I keep what I have on the server and install RAC OBS by installing VMWare, configuring the virtual sharing disks, and install RAC OBS using ASM?Yes, you can. Just make sure you have sufficient resources on this machine.
Note: 388577.1 - Using Oracle 10g Release 2 Real Application Clusters and Automatic Storage Management with Oracle E-Business Suite Release 12
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=388577.1
Regards,
Hussein

Convert 11.1.0.7 EBS 12.1.3 single node to RAC with ASM on 11.2.0.3 cluster

Hi
I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
However when I start the same locally from lsnrctl command listener starts.
trace_OraDb11g_home1-1212159AM174.log
====================================
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
has placement error.
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
.lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
ember `jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
mber `jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
snr' has placement error.
[AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
[AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
JXN-UX-EBS1D1Q.lsnr' has placement error.]
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
The crsctl has details as below:
=====================
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE jxn-ux-ebs2d1q
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.cvu
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
1 ONLINE OFFLINE
ora.jxn-ux-ebs1d1q.vip
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
1 ONLINE OFFLINE
Not sure how to fix this .
Regards
Ram

I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
along with SCAN_LISTENERS

Multiple ASM Instances on single node

Hi All,
After going through some threads it seems to me that multiple ASM instances on a node is not supported and recommended by ORACLE but i coudn't find any ORACLE document or support matrix mentioning this. Can any one give me a pointer to this. Please correct me if i am wrong and Multiple ASM instances are fully supported by ORACLE.
Thanks,

Multiple ASM instances on a single node are supported but not recommended due to several issues you could encounter during that kind of configuration.
Possible interraction between those instances for identification of each disk area usage,each disk area permissions , database instance to asm instance mapping and so on, could result in unwanted behaviour, as ASM is in some way just oracle's representation of LVM.
Intention is that any kind of distinction/separation of oracle related data under the ASM should be done through the disk groups.
So it seems it would be better to apply this kind of logic rather than doing suspiciously magical and rare configurations that could bring you similiary strange and unexpected problems.

R12 Single node to Multi-node Configuration

Similar Messages

Maybe you are looking for