R3COPY from Win 2003 (32 bit) /MSSQL 2005 to Win 2008 (64bit) /MSSQL 2008
Hi expert
I am planning to do system copy. The source and target system are as follows.
[Source system ]
ERP6.0
Windows 2003 (32bit)
MS SQL 2005
[Target System]
ERP 6.0
Windows 208 (64bit)
MS SQL 2008
Can I use R3COPY technique to do the copy? (meaning replacment of DB files and SID change after wards)
Thank you
Koji
install Windows 64-bit
install MS-SQL 64-bit
install SAP 64-bit
backup DB on old server
restore it on new server
attach it on new server.
copy kernel from old server
copy transport directory from old server
pray!
test all of this on a non-prod server and see what happens
Similar Messages
-
Hi Friends,
I hope somebody can help.
I have an Ides Ecc6(java+adap) installation on Oracle 10..*.os win 2003 32 bit
Then I try to start the System in mmc the dispatcher is stopping (first yeloow then grey) and no error messages
when is see sys log in SAP MMC
erro: SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256
when i try R3trans-d
Log:
C:\Documents and Settings\accadm>r3trans -d
This is r3trans version 6.14 (release 700 - 15.06.07 - 15:50:00)
unicode enabled version
2EETW000 sap_dext called with msgnr "2":
2EETW000 -
db call info -
2EETW000 function: db_ntab
2EETW000 fcode: NT_RDTDESCR
2EETW000 tabname: TADIR
2EETW000 len (char): 5
2EETW000 key: TADIR
2EETW000 retcode: 2
r3trans finished (0012)
Dev_wo.lo file
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Apr 16 14:07:43 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\ACC\DVEBMGS00\exe\dboraslib.dll' is "700.08", patchlevel (0.107)
B New connection 0 created
M sysno 00
M sid ACC
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 111
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 3724
M
M kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3724) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu Apr 16 14:07:44 2009
M DpShMCreate: sizeof(wp_adm) 18672 (1436)
M DpShMCreate: sizeof(tm_adm) 4232256 (21056)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1536)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
M DpShMCreate: allocated sys_adm at 06810040
M DpShMCreate: allocated wp_adm at 06812090
M DpShMCreate: allocated tm_adm_list at 06816980
M DpShMCreate: allocated tm_adm at 068169B0
M DpShMCreate: allocated wp_ca_adm at 06C1FDF0
M DpShMCreate: allocated appc_ca_adm at 06C25BB0
M DpShMCreate: allocated comm_adm at 06C27AF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06CA89B0
M DpShMCreate: allocated gw_adm at 06CA89F0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06CA8A20
M DpShMCreate: allocated wall_adm at 06CA8A28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host oiam
M
M Thu Apr 16 14:07:46 2009
M calling db_connect ...
C Prepending D:\usr\sap\ACC\DVEBMGS00\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Attaching to DB Server ACC (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4)
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now '/@ACC' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=06DF61E8,usrhp=06E53768)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@ACC on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06DF1478 06DF6A14 06DF629C
C Starting user session (con_hdl=0,svchp=06DF61E8,srvhp=06E07DD4,usrhp=06E53768)
C Now 'SAPSR3/<pwd>@ACC' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C DB instance ACC is running on OIAM with ORACLE version 10.2.0.1.0 since APR 16, 2009, 14:07:26
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090416 140746 OIAM
C OCI-call failed with -1=OCI_ERROR
C SQL error 376: 'ORA-00376: file 25 cannot be read at this time
C ORA-01110: data file 25: 'D:\ORACLE\ACC\SAPDATA1\SR3_22\SR3.DATA22''
C *** ERROR => Error 376 in stmt_fetch() from oci_execute_stmt(), orpc=0
[dbsloci.c 12714]
C *** ERROR => ORA-376 occurred when executing SQL stmt (parse error offset=0)
[dbsloci.c 12733]
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C SELECT VERSION FROM SVERS ;
C sc_p=06D44E98,no=0,idc_p=00000000,con=0,act=1,slen=26,smax=256,#vars=0,stmt=06E1C138,table=SVERS
C prep=0,lit=0,nsql=0,lobret=0,#exec=1,dbcnt=0,upsh_p=00000000,ocistmth_p=06E0FC68
C IN : cols=0,rmax=1,xcnt=0,rpc=0,rowi=0,rtot=0,upto=-1,rsize=0,vmax=0,bound=0,iobuf_p=00000000,vda_p=00000000
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C OUT: cols=1,rmax=1,xcnt=1,rpc=0,rowi=0,rtot=0,upto=-1,rsize=144,vmax=32,bound=1,iobuf_p=003F2DC8,vda_p=06E1C3A8
C lobs=0,lmax=0,lpcnt=0,larr=00000000,lcurr_p=00000000,rret=0
C SELECT VERSION FROM SVERS ;
B ***LOG BZA=> table SVERS does not exist on database [dblink#3 @ 1299] [dblink 1299 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 004096) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M req.vm = no VM
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server oiam_ACC_00 on host oiam (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Apr 16 14:07:46 2009
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10486
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3724) [dpnttool.c 327]
thanks for support
keshavaHi Rohit
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid ACC
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 111
intno 20050900
make: multithreaded, Unicode, optimized
pid 3452
Fri Apr 17 14:17:27 2009
kernel runs with dp version 229000(ext=109000) (@(#) DPLIB-INT-VERSION-229000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3452) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 111 successfully loaded
shared lib "dw_xtc.dll" version 111 successfully loaded
shared lib "dw_stl.dll" version 111 successfully loaded
shared lib "dw_gui.dll" version 111 successfully loaded
shared lib "dw_mdm.dll" version 111 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Apr 17 14:17:32 2009
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0225.qqq.nxst) took 5 seconds
Fri Apr 17 14:17:36 2009
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5361]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >oiam_ACC_00 <
DpShMCreate: sizeof(wp_adm) 18672 (1436)
DpShMCreate: sizeof(tm_adm) 4232256 (21056)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1536)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06810040, size: 4892312)
DpShMCreate: allocated sys_adm at 06810040
DpShMCreate: allocated wp_adm at 06812090
DpShMCreate: allocated tm_adm_list at 06816980
DpShMCreate: allocated tm_adm at 068169B0
DpShMCreate: allocated wp_ca_adm at 06C1FDF0
DpShMCreate: allocated appc_ca_adm at 06C25BB0
DpShMCreate: allocated comm_adm at 06C27AF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06CA89B0
DpShMCreate: allocated gw_adm at 06CA89F0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06CA8A20
DpShMCreate: allocated wall_adm at 06CA8A28
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Apr 17 14:17:37 2009
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 3652
argv[0] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ACC\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1045
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=ACC
argv[7] = -DSAPMYNAME=oiam_ACC_00
argv[8] = -DSAPPROFILE=D:\usr\sap\ACC\SYS\profile\ACC_DVEBMGS00_oiam
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( oiam) [dpxxdisp.c 11753]
DpStartStopMsg: send start message (myname is >oiam_ACC_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 111
Release check o.K.
Fri Apr 17 14:17:38 2009
DpJ2eeLogin: j2ee state = CONNECTED
Fri Apr 17 14:18:25 2009
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Fri Apr 17 14:19:53 2009
J2EE server info
start = TRUE
state = ACTIVE
pid = 3652
http = 50000
https = 50001
load balance = 1
start_lazy = 0
start_control = SAP J2EE startup framework -
Hello
Background:
We had Oracle 11.1.0.7.0 32-bit EE on Windows 2003 32-bit EE and now migrated to 64-bit (both OS and DB) and everything worked brilliantly ok except...
Problem:
We used to be able to connect to an external application (Postcode Plus from AFD) via extproc to search postcodes / addresses etc. However, after the migration getting the error:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
The listener.ora and tnsnames.ora configuration as exactly same as what we had on 32-bit machine (except the host name).
For convenience, I've attached both here:
listener.ora (on 32-bit machine):
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(PROGRAM = extproc)
(ENVS="EXTPROC_DLLS=C:\Oracle\product\11.1.0\db_1\LIB\pcpOracle.dll:C:\Oracle\product\11.1.0\db_1\LIB\afdutl32.dll")
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.30.241)(PORT = 1521))
tnsnames.ora (on 32-bit machine):
MYDB32 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.30.241)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MYDB32)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.ora (on 64-bit machine):
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.30.247)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(PROGRAM = extproc)
(ENVS="EXTPROC_DLLS=C:\Oracle\product\11.1.0\db_1\LIB\pcpOracle.dll:C:\Oracle\product\11.1.0\db_1\LIB\afdutl32.dll")
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\product\11.1.0\db_1)
(PROGRAM = extproc)
tnsnames.ora (on 64-bit machine):
MYDB64 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.30.247)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = MYDB64)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
Questions:
1. Does extproc for Oracle 64-bit 11.1.0.7 on Win 2003 64-bit load 32 bit DLL?
2. When searched got a quite of lot link about extproc32 (for all versions of UNIX), but not for Windows and found this link Extproc32 installation Does that mean it is not possible to load 32-bit DLL on 64-bit Windows installation?
3. Is there any workarounds? Or am I stumped so I should now go back and reinstate the 32-bit installation?
Any input / recommendation is appreciated!!
Regards
KannanDoes that mean it is not possible to load 32-bit DLL on 64-bit Windows installation?Yes,it's not possible,refer to MOS/metalink:
Is It Possible To Call 32Bit Libraries Using External Procedure Agent Extproc On Windows 64Bit ? [ID 372512.1]
Werner -
Option "SAP system" missing in SAP installer Win 2003 (32 bit)
Hi
We have SAP NW 7.0 SR3 & SAP ERP 6.0 SR3
When we are trying to install SAP ERP/ NW using master installer on Win 2003 32 bit (any database) the installation option "SAP Systems" is missing.
The same is available in Win 64 bit installation.
We have copied product.catalog file from 64 bit setup to 32 bit setup and started sapinst.exe again.
It worked fine.
ECC has been installed and we are able to thru SAP GUI (thick client).
Is it OK to do so?
Was this intentional or a bug in setup?
Thanks in advance !
Ruhi/ RiteshHi Ruhi,
New installation of ECC6 is for 64 bit only.You can not have 32bit installation any more.
That can be a reason.
Regards
Ashok -
Hello All,
Case 1 -In place upgrade
I would like to do in place upgrade from windows 2003 64 bit R2 that contains SSRS 2008 to windows 2008 R2 64 bit. The upgrade would be happened at OS level not at SSRS level.
I would like to know what are the necessary steps should be taken prior/during/post upgrade from SSRS end as we can not rollback if there is some issue with in place upgrade.
Case 2-Side by side upgrade
I would like to do side by side migration from windows 2003 32 bit that contains SSRS 2008 to windows 2008 R2 64 bit. The side by side would be happened at both OS level and SSRS level.
I would like to know what are the necessary steps should be taken prior/during/post side by side migration from SSRS end.Before doing anything Take backups .
In case of reporting services..
Back up your symmetric key. For more information.
Back up your report server databases and configuration files. For more information.
Back up any customizations to existing Reporting Services virtual directories in IIS.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Thanks,
Shashikant -
MDT 2012 to Migrate from Windows 2003 32 Bit to Windows 2012 R2 64 Bit
I have used MDT for so long however only for client OS upgrade - XP to Windows 7/8.
We wish to use MDT to migrate from Windows 2003 32 Bit to Windows 2012 R2 64 Bit. All servers are virtual on HyperV or VMWare - plan is to use USMT hardlink Migration.
Is this supported? Has anyone used this for server migration?
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer"Thanks Keith for your reply.
Even is USMT does not work, we are ok. SMIGdeploy will be helpful.
Basically, want MDT to run some scripts on the Windows 2003 server, post which install Windows 2012 and join it to the existing domain with the same computer name.
Then hydration kit to help with the installation of features etc. Also, we would like to take a complete backup to a WIM before migrating.
I am sure this is workable.
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer" -
How To Migrate Databases From Windows 2003 32 bit to windows 2003 64 bit?
Hi,
How To Migrate Databases From Windows 2003 32 bit to windows 2003 64 bit?
Db Version: 10.2.0.2
Thanks,
YusufAlso see MOS Doc 403522.1 (How to Migrate Oracle 10.2 32bit to 10.2 64bit on Microsoft Windows)
HTH
Srini -
Migrate MOSS 2007 Server from Server 2003 (32-bit) to Server 2008
I have a client with MOSS 2007 installed on Windows Server 2003, and a database server (SQL 2005) also on Server 2003. they have two new Windows Server 2008 servers, and they wish to do a migration. They have custom Features, including Event Receivers
installed in their environment.
Do I need to install the 32-bit edition of MOSS 2007 on the new server in order to be able to use the pre-compiled custom Features used in the current server?
My plan is to do the following:
(a) Migrate databases from current database server (SQL 2005) to new database server (SQL 2008),
(b) Re-assign SQL redirection to new database server (the database was previously on the same box as the WFE, and this was separated out last year to another server, but redirecting the SQL Server,
(c) Install MOSS 2007 (32-bit) on the other new server
(d) Patch both instances of MOSS 2007 to the same point
(e) Create (dummy) site collection on new server, and install all custom Features on server
(f) Add new server to existing Farm
(g) Remove previous server from Farm
What must I do to install existing custom Features on new server?
Is there anything that I have left out of the process? Do I need to do anything about the SSP running on the current server?Thanks Keith for your reply.
Even is USMT does not work, we are ok. SMIGdeploy will be helpful.
Basically, want MDT to run some scripts on the Windows 2003 server, post which install Windows 2012 and join it to the existing domain with the same computer name.
Then hydration kit to help with the installation of features etc. Also, we would like to take a complete backup to a WIM before migrating.
I am sure this is workable.
Regards, Vik Singh "If this thread answered your question, please click on "Mark as Answer" -
R12 Cloning from Windows 2003 64 bit to Windows 2008 R2 64 bit
Dear Gurus,
I have a 12.1.3 applications and 11.2.0.2 database running on Windows 2003 *64 bit*. Now I need to perform a migration from Windows 2003 to Windows 2008 R2 64 bit. Please confirm if we can directly perform a clone from 2003 64 bit to 2008 R2 64 bit using Rapid clone?
Thanks in advance!
-KhanWe are in Windows 2003 32bit on Applications and Windows 2003 64 bit for database. This architecture was certified as per Support which we had confirmed via SR.Correct.
BTW the reason for raising this thread is that the clone failed for db Tier at a very first go with the below error where it states unknown OS Windows 2008 R2.
E:\TEST\oracle\11.2.0\appsutil\clone\bin\..\jre\bin\java.exe -Xmx600M -cp E:\TES
T\oracle\11.2.0\appsutil\clone\jlib\java;E:\TEST\oracle\11.2.0\appsutil\clone\jl
ib\xmlparserv2.jar;E:\TEST\oracle\11.2.0\appsutil\clone\jlib\ojdbc5.jar oracle.a
pps.ad.context.CloneContext -e E:\TEST\oracle\11.2.0\appsutil\clone\bin\..\conte
xt\db\CTXORIG.xml -validate -pairsfile C:\Users\APDF38~1.ADM\AppData\Local\Temp\
2\adpairsfile_2800.lst -stage E:\TEST\oracle\11.2.0\appsutil\clone 2> C:\Users\
APDF38~1.ADM\AppData\Local\Temp\2\adcfgclone_2800.err && echo %ERRORLEVEL% > C:\
Users\APDF38~1.ADM\AppData\Local\Temp\2\adcfgclone_2800.res
RC-20011: Fatal: Failed to retrieve OS name. The following OS string returned fr
om System.getProperty("os.name") is unknown: Windows Server 2008 R2
Can't open Exception in thread "main" java.lang.ExceptionInInitializerError:
Invalid argumentPlease see these docs.
How to Overcome Windows 2008 Being Unrecognised by AutoConfig and rapid Clone? [ID 1270782.1]
Running adbldxml.pl On Windows 2008 R2 Dbtier Fails On Unknown: Windows Vista [ID 1263136.1]
Thanks,
Hussein -
HowtO - Upgrade 10gR1 WIN 2003 ent(non-asm) to 11gR2 WIN 2008 ent(non-asm)
I did this on VMWare:
Two servers:
Two servers - old ; new
Steps
old - oracle 10g ; win 2003 enter
- 3 databases (rman catalog ; production ; testing)
1.installed 11g r2 - different home (software ONLY)
2.cold backups - 10g db
3.upgraded them to 11g r2 (minor issues, easily corrected)
4.cold backups - 11g db
5.using Oracle toad get script database structure - tablespaces ONLY - 11g db
new
6.win 2008 enter
7.installed oracle grid (later for conversion from non-asm to asm)
8.installed 11g software ONLY
9.created disks (for later use for ASM)
10.Created three blank databases
11.Created similar folder structure as 11g db in 'old' server
12.Created similar tablespaces/datafiles in blank databases as source database.
13.cold backup of three databases - quick backup and recovery
14.Copied datafiles and log files over from 'old' server to 'new' server.
15.Using VBScripts, cloned each database from old server (11g db version) cold backups.
Notes
A.Should mention, I tried export/import option (various options) - tons of errors ! Gave up....
B.Above approach is time-consuming, not quick...
Warnings:
1.Tried installing Oracle SQL Developer plus Toad will not work/or install on x64 bit OS. Developer does
not work, due to Java. (Large number of hits on this).(hit and miss affair - you may get it to work or not..)
2.So I used 'old' server, toad tool, to query database at new server
RMAN Side.
1.Errors occur when you log onto RMAN FIRST TIME.
http://seilerwerks.wordpress.com/2007/03/06/fixing-a-32-to-64-bit-migration-with-utlirpsql/
Hope this helps others....
Ref:
http://download.oracle.com/docs/html/B13831_01/ap_64bit.htm#CHDCDAGEHi there
Good idea but what I find, is I usually come to this site for knowledge...or I google it.
The way I see it, if somone has upgrade issue (similar to this), this is place to add a thread... -
[SOLVED]Wine on 64-bit - can't find wine libraries
Hi. I'm a n00b at Arch with 64-bit system and would like to install Wine. I downloaded it from here:
http://aur.archlinux.org/packages.php?ID=7915
And then installed resulting 'bin32-wine-1.1.25-1-x86_64.pkg.tar.gz' . I satisfied all dependencies, and I get:
[warnec@chakra ~]$ wine
wine: error while loading shared libraries: libwine.so.1: cannot open shared object file: No such file or directory
I might also add that there are libwine.so, libwine.so.1 and libwine.so.1.0 files in /opt/lib32/usr/lib.
Last edited by warnec (2009-07-16 20:23:35)Whoa, simple relogging worked I'm starting to discover that some of mysterious linux bugs/problems are simply fixed by a reboot/relogin
Thanks for support guys -
SCOM 2007 server OS upgrade from 32 bit Win 2003 SP2 to Win 2008 R2 64 bit
Dear Experts,
We are planning to upgrade where in SCOM 2007 R2 presents on 32 bit Virtual Machine Win 2003 SP2 to Win 2008 R2 32 bit or 64 bit. Though OpsManager Database is already upgraded to SQL 2008 R2 from SQL 2005. So No pblm with DB upgradation.
So my point is If I go ahead to upgrade from Win 2003 (SCOM 2007 R2 resides) to Win 2008 R2 does it create any impacts on SCOM 2007 R2 environment ? Please let me know the procedure for this or any documentation is available to complete this.
Thanks in advanced!
Saravana RajaFirstly,
Please note that you can only upgrade an OS to the same architecture (i.e. from x86 to x86, and not to x64). See the following Support Article about supported upgrade paths for Windows Server 2003: https://support.microsoft.com/kb/951041?wa=wsignin1.0.
Therefore, if you plan to upgrade to a x64 architecture, you will need to perform a new installation, and not an in-place upgrade. If you are going that route, I'd suggest skipping Windows Server 2008 R2, and try to push to Windows Server 2012 if not Windows
Server 2012 R2; to more future-proof your environment.
Further, If you are going to perform a new OS installation (to move into x64 architecture), why not also utilize the "new installation" requirement in that scenario to also upgrade to System Center 2012 R2 Operations Manager?
The base scenario would be for you to perform an in-place upgrade of Windows Server 2003 x86 to Windows Server 2008 R2 x86. Except, there is no x86 version of Windows Server 2008 R2, only x64! Note: Windows Server 2008 (without the 'R2') has an x86 option.
--- If you found this post/reply helpful, please visit my personal blog for more helpful articles. --- AdinE MCSE, MCSA, MCITP, MCTS; (Specializing in System Center and Private Cloud) LinkedIn: http://ca.linkedin.com/in/adinermie Website: http://AdinErmie.Wordpress.com -
Downgrading from Win 7 64 bit to 32 bit
I know it's odd, but I have programs that won't run in 64 bit windows 7 but work fine in 32 bit win 7.
I have a G570 (4334) (64 bit win 7) and would love to download or get Lenovo disks for the 32 bit windows 7.
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS007940
Looks to be the spot to create such a disk? As I would like to do a clean install of the 32 bit version with the Lenovo drivers and such. I don't know if that will create a disk or not. Nor do I see anyway to order such a disk.
OR could I use my old OEM disk 32 bit win 7 from my old computer and the key from the G570?
I have three computers and three Win7 keys, one for Win 7 64 bit professional, one for Win 7 Home Premium, and the one on the laptop for home premium 64 bit. I know the Home Premium doesn't care if it's 32 or 64 bit.
My laptop is brand new. I've only tried to install my most critical program and it chokes on 64 bit win 7 (it doesn't like XP Mode on my Win 7 64 bit Professional either, but runs beautifully on my 32 bit win 7 machine -- but that one is going to be leaving the state when I give it to my daughter). Anyway, formatting the drive is of no concern to me as nothing critical is on it. Suggestions? Links?
THANKS!Hello,
Can I ask what the program is that will not run in the 64-bit version of Windows 7?
It is pretty rare to see a program that runs in the 32-bit version and not the 64-bit. Usually it's tied to something like the program installing 32-bit device driver, or having some 16-bit (e.g., Windows 3.1-era) code in it, neither of which are supported in the 64-bit version of Windows 7.
If it's not something like the above two scenarios, than perhaps by finding out more about the program we can find a way to make it work without having to go through the inconvenience of reloading the operating system.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Migrating Windows 2003 (64 bit) to Windows 2008
Hi Experts!!!!!
Recently we have been facing performance issue in our CRM 2007 development system. particulary with Tcode CRMD_ORDER. We have analysed from all corners like processor (4 processor), RAM (12 GB), User load (40 users), memory parameters, Network load, and also the EWA report from solution manager which shows that performance factor as green inidcator. But, while checking the load by transaction wise CRMD_ORDER is taking lot of time. We also run the DB Check and statistics update regularly. So, I presumed that probelm is with CRMD_ORDER tcode and posted the issue with SAP where it has come up with a solution to migrate OS from Windows 2003 to Windows 2008 as this is a issue with Windows 2003 server as per notes 1320013 and 1316558.
Now, what I would like to know is migrate from windows 2003 (64 bit) server to Windows 2008 then we need to follow system copy process only right. If yes then we need to follow homogeneous copy method only as this is same windows environment only or have to go with heterogenous copy. Also, if I do a homogenous copy then I need to take the backup and also export the data from current 2003 server and then clean it completely. After that need to install 2008 server and then install SAP freshly and then restore the data from backup or system copy method. Is this right or is there any other better way. Also, kindly suggest if you find any advantages or disadvantages with this process or migration.
Kind Regards,
SharathHi, yes you can do standart homogeneous system copy. First of all you need to test your scenario (if it are Productive server)
Create good backup and after try to do TEST system copy on installed win 2008, (this will show for you all
possible errors and surprises. But note SAP does'nt support current the windows 2008 R2 , more information -->
SAP on Microsoft Windows
Regards. -
ZCC fails to login after server migration from 32 to 64 bit
After I migrated my Primary server from 32 to 64 bit I can not login into ZCC. Page give me the following error:
JDBC Driver class not found: Sybase.jdbc4.sqlanywhere.IDriver
I migrated a Windows 2003 32 bit with Zenworks 11.2.4 to Windows 2008 R2 SP1 64 bit with Zenworks 11.2.4 in same zone. I would like to move to zenworks 11.3 but the documents show I need my Primary server to be 64 bit.
My Primary server is my CA and has the embedded Sybase database.Originally Posted by nop1983
Here you go...
https://www.novell.com/documentation...a/bj3xt3x.html
So you've only got one server?
yes, I only had 1 server in the zone and needed to move from windows 2003 32bit to windows2008 r2 64 bit.
Maybe you are looking for
-
Relatório de Análise de Vendas
Problema: Gerei um a determinada fatura (NFs) com e utilizei um código de imposto com a combinação (ICMS=17%+IPI=15%). O valor total desta nota R$ 115,00 só que quanto puxo o relatório de análise de vendas o valor que é exibido no campo Total de No
-
How can I create an application that has no menu bar?
I have an application which has all of its functionailty available on screen as buttons or fields. This works very well at the moment. However when I create and run the application I see a men bar appears nuch the same as when deisgning the applicati
-
Itunes on windows 8 has strange type when signing in
Hi, when I installed the latest update to iTunes on Windows 8, my Sign In under Store comes out with a strange coded font. now I cannot sign in to iTunes on the computer. Has anyone else experienced this. I tried rebooting and looking for updates to
-
Transferring outboubd deliveries between two systems
Hi Experts, we are trying to transfer the outbound deliveries created in system A to system B through idocs using standard inbound FM idoc_input_delvry FM in system B. when we do that the idoc is getting into error saying " document with number XXXXX
-
How to get back my ipad?
I had lost my ipads at 26 June 2012 in Hongkong One belong to me with serial no. DLXG****KNY and one belong to my son with serial no.DRSH****DKNW. Until today I have not found these two ipads yet <Edited by Host>