R400: Problem with OSD of Access Connections.

bug:
http://storage.wdolweb.cz/wifi_lenovo_wtf_again.jpg
correct behave:
http://storage.wdolweb.cz/wifi_lenovo_wtf_how_it_should_look.jpg
... really dont know, if it is matter of weather, or notebook was in bad mood... or why! but still there are many many many of these tiny bugs!
... you dont have to reply this message. i'm just reporting it. i'm using linux now - there are no lenovo drivers and applications, so everything works fine !!!
moderator note: problem added to title.
Message Edited by Agotthelf on 28-03-2009 12:29 AM

Dear John,
Please refer to Web Dynpro Best Practices: [How to Configure the JCo Destination Settings|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3103eb90-0201-0010-71af-be6f4a6f61d1?QuickLink=index&overridelayout=true]
Also please make sure that you use the invaidate method just after execute method and close the connection in finally block like:-
<RFC Node>   <RFC Object>= new <RFC Node>(WDModelScopeType.APPLICATION_SCOPE);
wdContext.node<RFC Node>().bind(<RFC Object>);
try
    <RFC Object>.execute();
    wdContext.node<Output Node>().invalidate();
}catch(Exception ex){
    // Log message here
}finally{
    wdContext.current<RFC Node>Element().modelObject().modelInstance().disconnectIfAlive();
Hope it will helps
Best Regards
Arun Jaiswal

Similar Messages

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supp

I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says - 'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

A problem with a session Access

Hi Olivier,
To connect with Forte while running distributed you must use System DNS
instead of User DNS on the server. The ftexec.exe on your server partition
will be launched by the NodeMgr running as UID SYSTEM. User DNS are not
available to processes running as UID SYSTEM.
Zenon Adamek
Purolator
-----Original Message-----
From: Olivier Andrieux [SMTP:oandrieuxaxialog.fr]
Sent: Tuesday, July 04, 2000 4:59 AM
To: forte-userslists.xpedior.com
Subject: (forte-users) A problem with a session Access
Hi,
We have defined a service object which calls a database Access, when we
use the driver odbc of another station the service object is created and
the application runs. But when we use the driver of the server we have an
exception and this message :
SYSTEM ERROR: Unable to start the partition AxiGecom_CL0_Part1 on any of
the
nodes to which it has been assigned. See the remainder of the error
stack for
more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method InterfaceManager.PrepareLOM
Error Time: Tue Jul 04 10:50:19
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2.15]) in application
"FTLaunch_cl0", pid 149 on node STAT10 in environment axialog.
SYSTEM ERROR: Unable to start partition AxiGecom_CL0_Part1 on node
SERVEUR59B.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Jul 04 10:50:19
Exception occurred (locally) on partition "Forte_cl0_Client",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2.15]) in application
"FTLaunch_cl0", pid 149 on node STAT10 in environment axialog.
SYSTEM ERROR: Attempt to load partition named AxiGecom_CL0_Part1 failed.
Class: qqsp_ResourceException
Error #: [1001, 4]
Detected at: qqrt_ForteExecAgent::LoadPartition at 1
Error Time: Tue Jul 04 10:49:15
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_cl0_Client",
(partitionId =
EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9:0x2, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3f9.4]) in application
"FTLaunch_cl0", pid 149 on node STAT10 in environment axialog
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3de, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3de.61]) in application
"AxiGecom_cl0", pid 386 on node SERVEUR59B in environment axialog.
SYSTEM ERROR: Failed to create service object
Axigecom_Serveur.Connection_BD.
Class: qqsp_ResourceException
Last TOOL statement: method qqsp_NameList.
Error Time: Tue Jul 04 10:49:15
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3de, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3de.61]) in application
"AxiGecom_cl0", pid 386 on node SERVEUR59B in environment axialog.
USER ERROR: (This error was converted)
Failed to connect to database: Axigecom, username: Administrateur.
[Microsoft][Gestionnaire de pilotes ODBC] Source de données non
trouvée et
nom
de pilote non spécifié
Class: qqdb_RemoteAccessException with ReasonCode:
DB_ER_DBMSCONNECTION
DBMS SQLSTATE: IM002
Class: qqsp_ErrorDescriptor
Detected at: qqdb_OdbcVendorInfo::DoSQLConnect at 10
Last TOOL statement: method qqsp_NameList.
Error Time: Tue Jul 04 10:49:15
Exception occurred (remotely) on partition "Forte_Executor",
(partitionId
= EB3ED870-274C-11D4-8051-304F7116AA77:0x3de, taskId =
[EB3ED870-274C-11D4-8051-304F7116AA77:0x3de.61]) in application
"AxiGecom_cl0", pid 386 on node SERVEUR59B in environment axialog.
for information, we use a server NT and the stations use Nt, the drivers
DNS users are declared.
We use Access2000, and the version M for Forté
Thanks in advance,
Olivier Andrieux
AXIALOG
France

Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi

Problems with AOL IMAP server connection on my BlackBerry Z10 STL100-3, and BB PlayBook 64GB WiFi
Thursday 4:20am EST, 02-19-2015
Hi, My connection to the AOL IMAP server has suddenly failed - Says "Not Connected" on Accounts page
I haven't changed anything and this just started failing this morning.
I've saw same issue on my Blackberry PlayBook 64GB.
Is anyone else recently experiencing AOL IMAP Errors?
Solved!
Go to Solution.

Yes! Same thing happened suddenly to my Z10 this morning. No AOL.

How can I debug a problem with the 3g data connection on my iPhone 4s?

This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
Anyone have any logs I can check or testing I can do on my end?
Thanks!

Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck!

I'm having problems with my mobile internet connection

I'm having problems with my mobile internet connection. Wifi works fine. It seems like my connection get lost every tuesday and friday between 11 and 12 am local time (guess it would be between 2 and 3 am Los angeles time for example). The connection won't comeback by itself. I have to turn the phone, iPhone 4s iOS 5.0.1, off and back on again. The connection immediatly works fine after the restart and stays fine for days. I really don't know what to do. My provider doesn't seem to know either. Tried a lot of things, new settings, resets, I even got a new iPhone. Still the same problem however. Richt now I changes the time setting to see it the problem occurs at another time. Btw: the phone doesn't say "no service" and I can send sms messages and make phonecalls. The 3G symbol or the circular symbol is shown next to the name of the provider.
Does somebody has an idea what this might be? Thanks a lot.

Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch

HT1631 updated to the new os x mavericks, now i'm having problems with my keychain access...everytime i asked to log in but when i do, it says can't find login items even if i reset it. what should i do?

updated to the new os x mavericks, now i'm having problems with my keychain access...everytime i asked to log in but when i do, it says can't find login items even if i reset it. what should i do?

Did you install the latest driver set for the device? there is a new release on motu.com for mavericks.
rachel

I had a problem with my WRT54GS not connecting to my inte...

I had a problem with my WRT54GS not connecting to my internet until I cloned my old routers mac address. I was using a BEFW11S4 which was bullet proof and worked for several years until I changed to Wireless G. Upon purchasing the WRT54GS and setting up all parameters exactly like I had before I could not make any connections, wireless or otherwise until I cloned my mac address to the same address as my previous router. Apparently my ISP had that mac address registered and would not properly perform DHCP even though all other paremeters were correct. I read lots of messages here on line with issues with the WRT54GS connecting and this fixed my problem outright. If you upgrade from a previous generation router (Linksys or otherwise apparently) copy your old routers mac address and clone it to your new router and you should be able to connect. This fixed my problem after several hours and days of troubleshooting. Good Luck Karnage

As an alternative to using MAC address cloning, you can phone your ISP, tell them you have a new router, and tell them to reset their system to accept the MAC address of your new router. This way, you won't have to remember the old MAC address, in the event that you need to reset your router to factory defaults.

Problem with not getting Internet Connect on AirPort Express

Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

Write access problem with external Storage Device Connected to macbook

Hi All,
I have write access problem ( gives only read-access, but no write access) with an external HDD device (NTFS formatted ) connected to my macbook.
Could anyone suggest me a file system ( apart from FAT32) which is compatiable with both Mac OS as well windows ;also this file system should allow me to create partitions of size more than 100 GB
(My external storade devcie capacity is 500 GB )
Thanks
Nelson

Hi Nelson,
simply said there is no such file system.
Regardless what you choose, only FAT32 is fully read-/writeable from both Mac OSX and Windows.
Third-Party helper for access to certain file systems are:
MacDrive (for Windows using HFS+, the OSX file system)
MacFuse with 3G (for fully usage of NTFS in OSX)
Paragon NTFS for OSX (also for fully usage of NTFS in OSX)
Only MacFuse is freeware, the other two are Commercial apps.
And just in case you are thinking of any Linux file system, like Ext3 or ReiserFS, you will at least need driver for Windows if not also for OSX (not sure about that).
Regards
Stefan

I had no problem with my IPad 3 connecting to my wi-fi but for some reason lately it tell me can not connect to network. I reset both my wifi and my ipad and I still get the same error.

I've had my IPad 3 for awhile and had no problems with it. The other day I went to connect to my wi-fi and it told me could not connect to network. It recognizes my wi-fi but won't connect. I have shut off my wi-fi and still the same problem. Today I reset my ipad back to factory and when I get to the wifi setup I still get unable to join the network. What is wrong

Dont use a password to connect the ipad and try if unable to join happens try another network. After that it is a repair. Now most likely it is the password on router. typically you access your router with http://192.168.1.1/ BUT it may be different if you changed it or your router uses different one.

Problem with new IPod Touch - connecting to computer

Just bought an IPod touch 2nd generation and plugged it into my computer to charge and to set up. I got a "found new hardware-Ipod" message and then the "found new hardware wizard" screen came up asking me for an installation CD or floppy to install software. I already have iTunes installed (the newest version) as have used it before with an Ipod nano. I have tried plugging the ipod into different USB ports on the computer but no avail.
Could anyone help me with this problem as am desperate to use my new Touch?
Thanks

All was well with my 2nd Generation Itouch until I downloaded Itunes 8.2. then ol boy what problems I have had! As follows:
1) Itunes cannot detect my device, therefore, no syncing is possible
2) Cannot connect to the Itunes Store....error indicates I have problems with my network connection (error code 3221), although I am connected and I have not previously had a problem.
I have searched for possible resolutions and have:
(a) Uninstalled Itunes and reinstalled .... NO GOOD
(b) Reset the network settings on the Itouch .... NO GOOD
(c) Reset all settings ... NO GOOD
(d) Ensured that the Apple mobile device option are okay
etc etc. In fact, I have done everything possible that has been indicated on the various websites. I should confirm that my computer recognises my Itouch BEFORE I access Itunes.
Please help.

Problem with nokia E5 modem connected with usb cab...

hi .. I have E5 and i use it for internet on my pc with usb cable. I have data plan from my operator. The problem comes now, whenever i connect my mobile to my pc with usb cable,it shows connected in pc suit mode, but whenever i try to establish a net connection through one touch access, it says that "the device connected is not found". Same occurs when i try from ovi suit. Its irritating... I checked everything, Reinstalled pc suit and ovi suit, system restore,blah blah... Ohh god... Some one help me out... Same occurs with nokia 6303 classic.
I used it before,the connections were easy to deal,but now its not happening at all...!!

I also have same problem with my E5 mobile.Please tell me the solution........

Problem with site-to-site connection

Guys,
I have a problem with establishing site-to-site vpn connection between my 2911 and remote router.
I have different site-to-site vpn on second WAN interface and it works like a charm. I performed same steps in order to configure new VPN to different location, on first WAN interface, and I am not able to connect two locations.
I've enabled debug and this is what I get:
*Feb 13 13:23:51.221: IPSEC(key_engine): got a queue event with 1 KMI message(s)*Feb 13 13:23:51.221: IPSEC(key_engine_delete_sas): rec'd delete notify from ISAKMP*Feb 13 13:23:51.221: IPSEC(key_engine_delete_sas): delete SA with spi 0x6B76A5F1 proto 50 for xxx_remote_IP_xxx*Feb 13 13:23:51.221: ISAKMP: Failed to find peer index node to update peer_info_list*Feb 13 13:23:51.221: IPSEC(update_current_outbound_sa): updated peer xxx_remote_IP_xxx current outbound sa to SPI 0*Feb 13 13:23:51.221: IPSEC(delete_sa): deleting SA, (sa) sa_dest= xxx_my_WAN_IP_xxx, sa_proto= 50, sa_spi= 0x8901AFF3(2298589171), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2603 sa_lifetime(k/sec)= (4608000/3600), (identity) local= xxx_my_WAN_IP_xxx:0, remote= xxx_remote_IP_xxx:0, local_proxy= 10.0.0.0/255.255.254.0/256/0, remote_proxy= 192.168.220.0/255.255.255.0/256/0*Feb 13 13:23:51.221: IPSEC(update_current_outbound_sa): updated peer xxx_remote_IP_xxx current outbound sa to SPI 0*Feb 13 13:23:51.221: IPSEC(delete_sa): deleting SA, (sa) sa_dest= xxx_remote_IP_xxx, sa_proto= 50, sa_spi= 0x6B76A5F1(1802937841), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2604 sa_lifetime(k/sec)= (4608000/3600), (identity) local= xxx_my_WAN_IP_xxx:0, remote= xxx_remote_IP_xxx:0, local_proxy= 10.0.0.0/255.255.254.0/256/0, remote_proxy= 192.168.220.0/255.255.255.0/256/0*Feb 13 13:24:00.289: ISAKMP (1224): received packet from xxx_remote_IP_xxx dport 500 sport 500 Global (R) QM_IDLE *Feb 13 13:24:00.289: ISAKMP: set new node -556398406 to QM_IDLE *Feb 13 13:24:00.289: ISAKMP:(1224): processing HASH payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224): processing SA payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224):Checking IPSec proposal 0*Feb 13 13:24:00.289: ISAKMP: transform 0, ESP_3DES*Feb 13 13:24:00.289: ISAKMP: attributes in transform:*Feb 13 13:24:00.289: ISAKMP: encaps is 1 (Tunnel)*Feb 13 13:24:00.289: ISAKMP: SA life type in seconds*Feb 13 13:24:00.289: ISAKMP: SA life duration (basic) of 28800*Feb 13 13:24:00.289: ISAKMP: authenticator is HMAC-MD5*Feb 13 13:24:00.289: ISAKMP:(1224):atts are acceptable.*Feb 13 13:24:00.289: IPSEC(validate_proposal_request): proposal part #1*Feb 13 13:24:00.289: IPSEC(validate_proposal_request): proposal part #1, (key eng. msg.) INBOUND local= xxx_my_WAN_IP_xxx:0, remote= xxx_remote_IP_xxx:0, local_proxy= 10.0.0.0/255.255.254.0/256/0, remote_proxy= 192.168.220.0/255.255.255.0/256/0, protocol= ESP, transform= NONE (Tunnel), lifedur= 0s and 0kb, spi= 0x0(0), conn_id= 0, keysize= 0, flags= 0x0*Feb 13 13:24:00.289: Crypto mapdb : proxy_match src addr : 10.0.0.0 dst addr : 192.168.220.0 protocol : 0 src port : 0 dst port : 0*Feb 13 13:24:00.289: ISAKMP:(1224): processing NONCE payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224): processing ID payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224): processing ID payload. message ID = 3738568890*Feb 13 13:24:00.289: ISAKMP:(1224):QM Responder gets spi*Feb 13 13:24:00.289: ISAKMP:(1224):Node 3738568890, Input = IKE_MESG_FROM_PEER, IKE_QM_EXCH*Feb 13 13:24:00.289: ISAKMP:(1224):Old State = IKE_QM_READY New State = IKE_QM_SPI_STARVE*Feb 13 13:24:00.289: ISAKMP:(1224):Node 3738568890, Input = IKE_MESG_INTERNAL, IKE_GOT_SPI*Feb 13 13:24:00.289: ISAKMP:(1224):Old State = IKE_QM_SPI_STARVE New State = IKE_QM_IPSEC_INSTALL_AWAIT*Feb 13 13:24:00.289: IPSEC(key_engine): got a queue event with 1 KMI message(s)*Feb 13 13:24:00.289: Crypto mapdb : proxy_match src addr : 10.0.0.0 dst addr : 192.168.220.0 protocol : 256 src port : 0 dst port : 0*Feb 13 13:24:00.289: IPSEC(crypto_ipsec_create_ipsec_sas): Map found 1stCentral-map*Feb 13 13:24:00.289: IPSEC(create_sa): sa created, (sa) sa_dest= xxx_my_WAN_IP_xxx, sa_proto= 50, sa_spi= 0xFA7FC4AF(4202677423), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2605 sa_lifetime(k/sec)= (4608000/3600)*Feb 13 13:24:00.289: IPSEC(create_sa): sa created, (sa) sa_dest= xxx_remote_IP_xxx, sa_proto= 50, sa_spi= 0x6D266D67(1831234919), sa_trans= esp-3des esp-md5-hmac , sa_conn_id= 2606 sa_lifetime(k/sec)= (4608000/3600)*Feb 13 13:24:00.293: ISAKMP: Failed to find peer index node to update peer_info_list*Feb 13 13:24:00.293: ISAKMP:(1224):Received IPSec Install callback... proceeding with the negotiation*Feb 13 13:24:00.297: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE *Feb 13 13:24:00.297: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:00.297: ISAKMP:(1224):Node 3738568890, Input = IKE_MESG_FROM_IPSEC, IPSEC_INSTALL_DONE*Feb 13 13:24:00.297: ISAKMP:(1224):Old State = IKE_QM_IPSEC_INSTALL_AWAIT New State = IKE_QM_R_QM2*Feb 13 13:24:10.053: ISAKMP (1224): received packet from xxx_remote_IP_xxx dport 500 sport 500 Global (R) QM_IDLE *Feb 13 13:24:10.053: ISAKMP:(1224): phase 2 packet is a duplicate of a previous packet.*Feb 13 13:24:10.053: ISAKMP:(1224): retransmitting due to retransmit phase 2*Feb 13 13:24:10.053: ISAKMP:(1224): retransmitting phase 2 QM_IDLE -556398406 ...*Feb 13 13:24:10.553: ISAKMP:(1224): retransmitting phase 2 QM_IDLE -556398406 ...*Feb 13 13:24:10.553: ISAKMP (1224): incrementing error counter on node, attempt 1 of 5: retransmit phase 2*Feb 13 13:24:10.553: ISAKMP (1224): incrementing error counter on sa, attempt 1 of 5: retransmit phase 2*Feb 13 13:24:10.553: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE *Feb 13 13:24:10.553: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE *Feb 13 13:24:10.553: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:20.553: ISAKMP:(1224): retransmitting phase 2 QM_IDLE -556398406 ...*Feb 13 13:24:20.553: ISAKMP (1224): incrementing error counter on node, attempt 2 of 5: retransmit phase 2*Feb 13 13:24:20.553: ISAKMP (1224): incrementing error counter on sa, attempt 2 of 5: retransmit phase 2*Feb 13 13:24:20.553: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE *Feb 13 13:24:20.553: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE *Feb 13 13:24:20.553: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:29.997: ISAKMP (1224): received packet from xxx_remote_IP_xxx dport 500 sport 500 Global (R) QM_IDLE *Feb 13 13:24:29.997: ISAKMP:(1224): phase 2 packet is a duplicate of a previous packet.*Feb 13 13:24:29.997: ISAKMP:(1224): retransmitting due to retransmit phase 2*Feb 13 13:24:29.997: ISAKMP:(1224): retransmitting phase 2 QM_IDLE -556398406 ...*Feb 13 13:24:30.497: ISAKMP:(1224): retransmitting phase 2 QM_IDLE -556398406 ...*Feb 13 13:24:30.497: ISAKMP (1224): incrementing error counter on node, attempt 3 of 5: retransmit phase 2*Feb 13 13:24:30.497: ISAKMP (1224): incrementing error counter on sa, attempt 3 of 5: retransmit phase 2*Feb 13 13:24:30.497: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE *Feb 13 13:24:30.497: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE *Feb 13 13:24:30.497: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:31.725: %SYS-5-CONFIG_I: Configured from console by gyadmin on vty0 (10.0.1.12)*Feb 13 13:24:40.497: ISAKMP:(1224): retransmitting phase 2 QM_IDLE -556398406 ...*Feb 13 13:24:40.497: ISAKMP (1224): incrementing error counter on node, attempt 4 of 5: retransmit phase 2*Feb 13 13:24:40.497: ISAKMP (1224): incrementing error counter on sa, attempt 4 of 5: retransmit phase 2*Feb 13 13:24:40.497: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE *Feb 13 13:24:40.497: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE *Feb 13 13:24:40.497: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:24:41.221: ISAKMP:(1224):purging node -932969703*Feb 13 13:24:50.497: ISAKMP:(1224): retransmitting phase 2 QM_IDLE -556398406 ...*Feb 13 13:24:50.497: ISAKMP (1224): incrementing error counter on node, attempt 5 of 5: retransmit phase 2*Feb 13 13:24:50.497: ISAKMP (1224): incrementing error counter on sa, attempt 5 of 5: retransmit phase 2*Feb 13 13:24:50.497: ISAKMP:(1224): retransmitting phase 2 -556398406 QM_IDLE *Feb 13 13:24:50.497: ISAKMP:(1224): sending packet to xxx_remote_IP_xxx my_port 500 peer_port 500 (R) QM_IDLE *Feb 13 13:24:50.497: ISAKMP:(1224):Sending an IKE IPv4 Packet.*Feb 13 13:25:00.497: ISAKMP:(1224): retransmitting phase 2 QM_IDLE -556398406 ...*Feb 13 13:25:00.497: ISAKMP:(1224):deleting node -556398406 error TRUE reason "Phase 2 err count exceeded"*Feb 13 13:25:00.497: ISAKMP:(1224):peer does not do paranoid keepalives.
Any ideas what is the cause? I must add, that right now I do not have access to remote router.
Thank you in advance for any help.

I finally figured out, that problem was with defaulr gateway on my router. Case closed.

N8 Problems with Maps and "Network connection requ...

I started with German O2 as my provider.
So at /Settings/Connectivity/Settings/Destination I found O2 MMS for "WAP services" an O2 Internet for "Internet".
Now I changed my provider and probably deleted both "Access point" Items.
When I'm starting OVI Maps I'll be always asked:
"Network connection required. Define access point to connect?"
And I can choose between:
O2 MMS (already deleted)
and web'n'walk (from t-mobile)
Why I can choose something, I already deleted it?
BTW: Problem exist from first version 011.012 till 013.016

Damn, just tried to post with IE9 but the forum doesn't seem to work on IE9 (final). So this time with Firefox...
@aspergerguy:
I tried both of these settings, non worked in my home network.
Sill I got a solution that works for me altough not everybody will be hapy with it:
I did a soft reset and now the A-GPS works fine again. I did that because i remembered that the problem appeared after I sent my self a config SMS from my service provider with the internet access settings. That somehow messed it up. Still I can't find a difference in the settings for A-GPS, but that doesn't matter to much to me now that it works
Getting all settings right again didn't take as long as finding the error...
The thing that would be nice to get working is push mail on OVI. But that seems to be a longer story

R400: Problem with OSD of Access Connections.

Similar Messages

Maybe you are looking for