R6002 runtime error floating point support not loaded

Can anybody help me to fix this runtime errore?
it appears when i try to open the itune store, i can actually see the itune store window, but the error pop up is showed before i can do anything.
what i have to do to fix it?
thanks a lot

If you Google your error, you will see it crops up quite a lot. Unfortunately it doesn't help much with a solution.
It is possible that your iTunes has got corrupted.
I would run a scan for malware with up to date definitions.
Then download a fresh copy of iTunes from here:
http://www.apple.com/itunes/download/
Save it on your desktop.
It is a good idea to make backup copies of iTunes Library.itl and iTunes Music Library.xml before removing iTunes. (the library files are in the iTunes folder in My Music).
Then remove iTunes and related programs using this method:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
Then install iTunes.
P.S>
I forgot to mention, if you have not already done so, try restarting your computer to see if that clears the problem before reinstalling iTunes.
Message was edited by: polydorus

Similar Messages

Runtime Error: R6002 Floating Point Supported Not Loaded Error

I receive a Microsoft Visual C++ Runtime Library Error when I attempt to access the iTunes Store. Can someone please help me solve this problem.

Do you have any antivirus software? I've never seen this problem, but after reading some things about it, it's caused by earlier bad programming (not likely, since noone else is having the problem with iTunes), or a virus.
If you don't have antivirus, there are a few free ones, but I can't say I recommend them.
A couple free ones you must install:
http://free.avg.com/
http://www.clamwin.com/
And an online scanner:
http://onecare.live.com/site/en-us/default.htm?s_cid=sah

Bridge CS5 "Floating point support not loaded" Error R6002

Hi,
I have been getting this error ever since I got a virus and cleaned it off my computer. Obviously the virus attached itself to the bridge executable file and when it was "fixed" by the antivirus it has corrupted the bridge file.
I have searched and searched how to fix this error to no avail.
I have also uninstalled and reinstalled photoshop/bridge without any success too.
Please can someone tell me how to fix this!

Have you tried resting the preferences? Hold down ctrl key and start Bridge. You will get a reset window with 3 options. THis file not affected with a reinstall.

R6002 floating point support not loaded

Hi,
I get this message when I try to connect to the store. Uninstalling iTunes seems to work for a while but then I get this message again. I don't really want to uninstall each time I want to visit the iTunes store. Can anyone help with this?
Regards,
William

If you search the forum, you will find this error has come up a few times without a definite solution.
As a start, you might want to run a scan for malware.
It might also be worth getting a second opinion from one for the free online scanners. But only use one of the big names as there are many scams out there.
Some examples- Norton, Kaspersky, Pandasoft.
http://www.kaspersky.com/virusscanner

Who know this bug "ERROR: floating-point constants should not appear"

anyone know how to solve this bug
ERROR: floating-point constants should not appear
Error preverifying class org.javabluetooth.stack.BluetoothStack
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1

HI,
it seems that ur using the package "org.javabluetooth.stack.BluetoothStack" in WTK1.0 or 2.0 which does not support floating point. The above package uses float data type. You can download the new version of WTK (2.1) which supports floating points.

ERROR: floating-point constants should not appear

ERROR: floating-point constants should not appear
Error preverifying class KGUI.KLabel
com.sun.kvem.ktools.ExecutionException: Preverifier returned 1
Build failed
I get this error after adding this code to my application:
     private int C=0;
     private float D=0.0f;
     private int H=0;
     private float store=0.0f;
     private int pos=0;
     private int SH=0;
..................some code.....................
     H=1+ROWS*(f1.getHeight());
     if(H/kawalki.length>0){
          C=H/kawalki.length;
          D=kawalki.length/(H%kawalki.length);
          SH=C;
          if(D>=0.5f)
               SH++;
     }else{
          SH=1;
          D=kawalki.length/(H%kawalki.length);
.................some code..............
protected void keyPressed(int keyCode){
int game=getGameAction(keyCode);
switch(game){
case UP:
if (line>0){
line--;
               pos-=C;
               store-=D;
               if(store<0.0f){
                    pos--;
                    store=1.0f+store;
repaint();
break;
case DOWN:
if(line+ROWS<kawalki.length){
               line++;
               pos+=C;
               store+=D;
               if(store>=1.0f){
                    pos++;
                    store--;
repaint();
break;
Can anybody help me quick?

If the platform is CLDC 1.1 you can have floats. Run preverify to see the options. The cldc1.1 preverifier seems to have options to allow rejecting floats/doubles but the default seems to be to allow them.
Usage: preverify [options] classnames|dirnames ...
where options include:
-classpath <directories separated by ';'>
Directories in which to look for classes
-d <directory> Directory in which output is written (default is ./output/)
-cldc1.0 Checks for existence of language features prohibited
by CLDC 1.0 (native methods, floating point and finalizers)
-nofinalize No finalizers allowed
-nonative No native methods allowed
-nofp No floating point operations allowed
@<filename> Read command line arguments from a text file
Command line arguments must all be on a single line
Directory names must be enclosed in double quotes (")

VxWorks Floating-point support 2.0 missing (LV2011SP1 RIO4.1)

Hi,
I have a strange problem with a CRIO System (9022) using LV2011SP1 RIO4.1 and MAX5.1.
Since I had older LV Versions on the computer I did some cleaning up in the LV components
and ended up deleting everything which belonged or depended on older LV versions.
Then I re-installed LV2011SP1 plus RT module SP1 plus (hopefully) all drivers needed.
Then I started MAX to update the software on the CRIO target to the versions installed on the host.
However, I cannot do that, I always get the following error:
VxWorks Floating-point support 2.0 missing (not installed on host)
I have no idea which component is missing where this is included.
Could someone please point me to the right package or driver?
TX
Solved!
Go to Solution.

I am having a similar issue as well. I am trying to install only LabVIEW Real-TIme 11.0.1 on a cRIO 9023 that has no software previously installed. It returns a message saying "LabVIEW Real Time 11.0.1 requires VxWorks Floating Point Support 2.0". I did some research and found LV2011SP1 Real Time Module should install VxWorks 6.3 but I cannot find this or anything related to VxWorks in the list of features to install in MAX.
Thanks,
cookieGT
University of Georgia Alumni

Why do I get "error code 3: Could not load front panel" when I run my executable.

I have a LV 8.5 VI that controls only an agilent spectum analyzer. The agilent VIs call DLLs rather than SCPI commands. I created an application and an installer to load on a non LV machine and ran setup which was successful. When I run the EXE I get "error code 3: Could not load front panel" for each of my agilent spectrum analyzer VIs. I have to click "OK" about ten times, once for each VI. (My executable runs fine on all machines that have labview 8.5) The front panel does load with a broken arrow. The errors listed when the arrow is clicked for all of the Agilent VIs state: Missing subVI AGE444xInitialize.VI (or close.VI or read.VI etc.)
There is an AGE444x32.DLL in the data folder with the EXE file so I included as support both the DLL and all of the agilent drivers in the application build. Still no luck. I have built the application and installer about 6 times in various forms. I NEED AIR SUPPORT.
Unfortunately I do not have access to the internet at my jobsite so bear with me.
Rob

Hi V-rob,
I'm glad to hear the executable is working now that NI-VISA is installed. Thanks for posting the solution!
Jennifer R.
National Instruments
Applications Engineer

TS2570 startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

startup itunes get runtime error R6034 and then not correctly installed ERROR 7 (windows error 1114).

ChrisJ4203 wrote:
Use this support document to remove iTunes and reinstall it on the computer. Follow the directions exactly. http://support.apple.com/kb/HT1923
Chris,
This absolutely solved the problem !!!!!!!!!!!!!!!!!!!!! I was having the exact same error messages as Mike.
Thank You for the great fix and I did not lose one song file!!!!!!!!!!!!
G

Rouble running iTunes on my PC. getting error Runtime Error R6034 An Application to load C runtime library

Trouble running iTunes on my PC. getting error Runtime Error R6034 An Application to load C runtime library & ...

Hi TB326P2,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

TS5376 HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

HI, I installed Itunes on my computer. When i wanted to open the application, it gives error "Apple Application Support not found" "Error 2 (Windows error 2)"

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Application Support won't install normally.
tt2

Crystal Report Runtime Error 9.0.Could not open the report

Hi,
Getting the Crystal Report Runtime Error 9.0.Could not open the report while Run on Launch Application. Actually in Launch Application, created a link for exe which is having crystal reports. We can open the Crystal Reports from the exe outside B1.
Note: SAP 2007, Crystal Report 2008 is using.Normally can open crystal report.
Any help to fix the error is appreciated.
Thanks & Regards,
Parvatha Solai.N

Hi,
Please post screen shot of error message here.
Thanks & Regards,
Nagarajan

Trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

ERROR: PROP RES DLL NOT LOADED, help

hi i get this message when i try to open an image in photoshop.. it says error: prop res dll not loaded
does anyone have any idea what this means and how i can dodge it?

well when i open photoshop and try to open an image thats what it does.. it gives me that exact error.. i try and close the box and basically photoshop freezes and i have to start task manager to end it..
i searched dll on google and all i found was people with the same problems.. only there's were in microsoft office..
it's a free copy someone gave me so i'm thinking maybe it has something to do with copyright crap? she also gave me dreamweaver and i have no problems with that so i'm not really inclined to think that is the problem..

Error Code: -17004, Could not load DLL or library

Hi All,
I am getting the following error message:
Error loading step 'x' of sequence 'MainSequence' in file 'y'. Could not load DLL or external library C:\bin\driver.dll
Error Code: -17004, Could not load DLL or library.
Source 'TSAPI"
My main DLL is one written in C in LabWindows. This DLL calls a second DLL that was written in Visual C++
I am using TestStand 2010 SP1 as well as CVI/LabWindows 2010. I have WinXP Professioanl SP3.
This same sequence, DLL1, and DLL2 have worked together in previous versions of TestStand!!!! All I did was upgrade to Developer Suite 2011.......??????
I have reviewed all the posts regarding this problem and have so far done the following:
1. Verified Both DLL1 and DLL2 reside in the same directory
2. Copied DLL2 into C:\Windows\system32
3. Used Dependency Walker to verify that there are no other missing DLL's
4. Unistalled Explorer 8 and installed Explorer 7 because of somthing I saw in depends and something I read while researching this problem.
5. Verified the Search Directories in TestStand
I am wits end, as I cannot determine what the problem is and any suggestions would be welcome
Solved!
Go to Solution.

So I did come up with a solution to this problem, but I don't understand why it solves the issue. Hopefully some of you can provide some insight.
So all my sequences were experiencing the problem described, and all sequences basically call the same dll's over and over.
I have a dll that I use as my "main" dll. All my sequences use this dll and I continually add more functions as our company designes new products, etc. This dll uses functions that are from my CommDll. The CommDll was written in C++, and it is also used in several other dll's that my sequence call's as I use it for all serial/telnet requirements.
So my test sequences for example calls the following dll's usually in this particular order ---
DbDriver - This dll handles all the database functioanality for our products, and calls libMysql.dll
PwrController.dll - this dll controls a pwrcontroller for all power on/power off, reboot, etc of our product. This dll calls the CommDll.
CompanyDll - This is the "main" dll that hadles all the cli commands and other test functions that our product requires. This also calls CommDll.
When the sequence calls are done in the order above, it does not work.. However, if I switch the sequence file to call the CompanyDll before the PwrController.dll everything works fine. Is there an order of operations here????
I also found that when I compiled my PwrController.dll with CVI 2010, it gave me an error could not load PwrController.dll no matter what order the seqence calls were, leading me to believe that I am missing something when building this particular dll. As soon as I copy the original, developed and compiled in 2006, everything works again.
Thanks,
greggj

R6002 runtime error floating point support not loaded

Similar Messages

Maybe you are looking for