RA to be calculated only for Approved Sales Orders

Hi,
We have a requirement of RA being calculated on Sales orders only of the Status of the Order is Approved.
Please suggest, if any particular BADI / Exit can be used for the purpose.

Dear Swapvick,
Thank you for using the SDN Forums/
Please refer to the following note in relation to how Results Analysis interacts with Status'
Note: 539947     Status in the results analysis and WIP calculation
Note: 406918     Special cases during results analysis for sales orders
Note: 181060     Daily results analysis for sales orders/documents
Note: 83562       Performance in results analysis of sales orders
I hope the information provided in the notes helps to clarify the issue. If not please specify the issue a little more clearly with the following type information:
1. What you are trying to do
2. What the system is actually doing
3. What you expect the system to do?
Kind Regards,
Brendan

Similar Messages

  • VPRS Cost not pickibng only for single sales order

    Hello Gurus
    Goodevening every body
    If we maintain  two prices  in material master one is moving average and another  one  is stanrdard price which  price the system will pick in the  sales order of my pricing procedure.
    Note-Only for one sales order system is not picking  VPRS  cost in my sales when was doing testing and giving some  message  in condition analysis -VPRS     111 Condition ignored (requirement 004 not fulfilled)
    I tried to analysis it but not able to come final conclusion this  message
    I am looking for your inputs
    Thanks in advance
    Regards
    Venkat

    Something wrong in the "item category" settings for that material.
    Pls activate "determine cost" control in the item category setting.
    Revert back for confirmation.
    Rgds
    Sumanth.Gururaj
    Consultant/Systems Analyst - SAP SD/MM

  • Interest calculation only for open item for customers

    Hi, do you know how to calculate Interest calculation only for open item for customers?I do not want to see cleared   items. I have problem with customization.
    Best Regards
    Tom

    In the item interest calculation, you can tick the  'open items' for calculation of interest and also select the 'no cleared items'.
    Regards

  • Discount calculation for a sales order in CRM

    Hi All,
    I need to change the pricing data for a sales order item using a BAPI. For this I want to make use of the BAPI_BUSPROCESSND_CHANGEMULTI. But I am not sure as to which of the fileds to be used for the discount rate calculation. The scenario is, from a Custom UI we will change the discount given for an item and the same has to be reflected in CRM and the calculation for that also will be carried out in CRM.
    Can somebody throw some light on this?
    Regards,
    - Prasenjit

    Hi Richard,
    There is no pricing procedure in the UI. For every calculation the UI is calling a BAPI and changing the UI accordingly. Everything needs to be done in CRM.
    The requirement is basically to fetch the pricing details for a contract that is under creation. The main funda is to obtain the pricing document guid, which will intern fetch the pricing condtion rates corresponding to a condition type. Can you tell me how to do that?
    Regards

  • Enable the approval workflow for the Sales Orders (Standard)

    Dear All,
    I need to enable the approval workflow for the Sales Orders (Standard). How can I do this? Please update
    The version of apps is 11i
    many thanks in advance...
    Edited by: santark on Oct 27, 2010 3:47 PM

    Dear All,
    I need to enable the approval workflow for the Sales Orders (Standard). How can I do this? Please update
    The version of apps is 11i
    many thanks in advance...
    Edited by: santark on Oct 27, 2010 3:47 PM

  • Is there a standard report for calculation commision for the sales person?

    is there a standard report for calculating commision for the sales person?

    Hi Stephen,
    Use standard tcode IW39.
    In IW39 in section General Data / Administrative Data the is a check box "incl. object list" just tick that box and then give your required input parameters and u can get actual cost and planned cost both equipment wise (provided your input is equipment).

  • Wrong tax calculation for minimum sales order scenario

    Hi all! We are trying to use minimum sales order value for our sales order processing in CRM. The sales order value and the calculated tax looks fine when the sales order is created. Eg.
    Quantity = 10
    PR00   $4 each    Total value of $40
    AMIW  $50
    AMIZ   $10
    MWST $6.25 (tax of 12.5%)
    When we create the billing document in CRM, the net value is shown as $50. However, when we look at the Conditions, the tax is calculated based on a tax base value of $100 and hence ended up with $12.50.
    Quantity = 10
    PR00   $4 each    Total value of $40
    AMIW  $50
    AMIZ   $10
    0TTE   $0
    MWST $12.5 (tax of 12.5%)
    Does anyone know what I might have missed out that would cause this problem?
    Any comments would be very much appreciated.
    Cheers!
    SF

    Hi Devi,
    If you want to do the billing in CRM, then you need to use the billing pricing procedure in CRM. Below is the list of the configurations I usually do:
    1. Create new transaction type if needed
    2. Create new item catagory if needed
    3. Assign item category to transaction type if 1&2 is created
    4. Create new document pricing procedure
    5. Assign pricing procedure to sales organisation and new document pricing procedure
    6. Create new billing type if required
    7. Creat new billing category if required
    8. Assign billing item category
    9. Assign revenue account for sales transactions
    10. Assign accounting document type to billing type
    11. Create new sales order type in R3 if 1 is done
    12. Create new item category in R3 if 1 is done
    13. Make sure that item category is assigned to the new sales order type in R3
    14. Create delivery item category in R3. This has to be the same item category as that in the sales order as the system copies the item category of the sales item into the delivery.
    Hope that helps.
    Regards
    SF

  • Net price calculation for a sales order item

    I am sending the input to BAPI_SALESORDER_CREATEFROMDAT2 for a sales order item with a customer expected price and the material number (pricing group is not being filled in). When the sales order is generated, I see that net price is different from the expected price and the price is being obtained based on the material number that is being given as input. I want to know at what point of code the net price is calculated?  I tried to debug and see but with the numerous userexits and BADIs in the calls I am not successful yet. Any input is appreciated.

    It goes through different pricing routines but the start will be in function module 'PRICING'. Put a break point and run your BAPI or go to tcode VOK0 - find the condition and routines.
    Pricing will be calculated based on customer and material.
    Previous answer is pretty good, you need to fill item conditions in table in bapi also header conditions if you are using header pricing.
    Anyways, first of all create your order from VA01 and see the netprice in conditions. again, the pricing will also depends upon region of customer and material.

  • Report for viewing Sales order no against delivery date & actual GI date

    Hi Experts,
    Is there any report for viewing Sales order no against delivery date & *actual GI date*
    Because in VL06F , i can only able to get planned GI.
    Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
    Regards,
    Sujit S.

    dear Hrishi,
    i followed your suggestion, but couldn't get desired results,
    here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
    thanks for your valuable reply.
    @ G. Lakshmipathi ;-
    i think i will need to develop z-report for fetching the data from the tables
    VBAK (to get sale order reference) and
    LIKP (to get delivery and actual GI date)
    thanks for your reply,
    Regards,
    Sujit

  • How to create a single delivery for two sales orders?

    Hi Experts,
    I need to create one delivery for two sales orders. But it fails.
    The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
    Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
    I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
    It not happened because of incoterms.? different dates
    Kindly help regarding this.
    Thanks
    Raghu

    Prerequisite for Grouped delivery
    1. Header data should be same like Inco terms,Payment terms
    Go to VL10A
    Enter the sales order Numbers and execute
    Select the sales order Nos  for the group delivery and select "Background"  Tab in Tool Menu Bar
    If delivery is created coloured line items will get generated
    Check the log for delivery docuements
    Check and confirm
    Senthils

  • Credit Block for released sales order

    Dear All,
    I have got one issue. There is a sales order which was created earlier say 15 days back. It went into the credit block at the time of saving it. It was released through VKM3 too.
    Now when i change any field in the sales order today, it is going into the credit block. We are not changing any value of any of the item. Just maintaining the Billing block in it or remobving the Billing block.
    The number of days maintained in the OVA8 are 182. So as per the standard functionality it should not go into the credit block for any change in the sales order like changing the billling date or changing the billing block.
    Can you please let me know what might be the reason for this sales order to go into the credit block..??? Any help is very much appreciated.
    Thanks and regards,
    Vishi.

    Dear Vishi
    Please check if you have checked the critical fields option.
    Credit check against critical fields (fixed value dates)
    The indicator controls the critical field check. If the field is selected, the system checks whether critical fields have been changed.
    Use
    If a check is carried out, the following fields are relevant:
    Payment terms
    Additional value days
    Fixed value date
    Note
    Use this type of check for sales documents only.

  • Outbound Order Confirmation - Output control for incomplete sales orders

    Hi EDI Folks,
    I have a simple question. I want to send EDI 855 for only the completed sales orders.
    Whenever inbound sales order is processed and if the order is incomplete. I don't want to send the order confirmation for the order at that point of time. When that order is made complete, then only i want to send the order confirmation (EDI 855).
    How can we do it??
    What is the output determination requirement for this??
    Right now i am using requirement '02' which proposes EDI output for both complete and incomplete sales orders.
    Please respond to the above quesition.
    Thanks and waiting for your reply,
    Creasy Matt

    MxG,
    For both plant and pricing condition functional config was already done. If any of these two fields are missing, the status of sales order will be incomplete.For incomplete orders also, the EDI output is being proposed.
    Now just tell me, in which SAP program, do i have to put the break point?
    Where exactly ??
    Thanks and kind regards,
    Creasy Matt

  • MTO - how to prevent a second planned order for a sales order?

    Dear friends,
    We are working on Make to Order process (Planning strategy group 20).
    No Production/process order is used
    Shop floor uses a different system --> details from planned order is passed to the shop floor system; and finished product is delivered/posted into SAP Sales order stock - through interfaces
    No QM in place
    A typical day-to-day scenario –
    Sales order Qty = 100
    MRP Run à Planned order qty = 100
    Raw materials posted to ‘Sales order stock’
    Planned order is firmed
    For example if Produced qty = 90
    sales order stock of the finished product = 90
    Balance 10 cannot be produced / delivered for various reasons
    Planner posts the raw material to cost center / rejections / own stock etc., and ensures that the ‘sales order stock’ of the raw materials are zero.
    Planner deletes the planned order
    Next MRP run triggers a new planned order for the balance qty 10
    Now, the requirement is to prevent the new planned order getting generated for the balance quantity, during the subsequent MRP run (despite the shortage in the Sales order stock of the finished product).
    The following options have been evaluated –
    Once the final good receipt is done & before deleting the planned order,
    o       Change the Sales order quantity to match the total produced quantity
    o       (or) Change the schedule line category for the Sales order item from CP to CN
    §         Since the Sales order and planned order are handled by different teams, considering the frequency of correspondence/coordination needed between these two teams to get the sales order items corrected, this idea is not accepted
    §         Additional authorization for the planner to change the sales order item is not acceptable
    Include Under delivery / Unlimited tolerances
    o       at the customer (master) level
    o       (or) Sales order level…
    §         In this case, System seems to consider the tolerances only when the  delivery for the Sales order is posted; and not when the sales order stock is received within the tolerance limits;
    §         Considering the time gap between the GR and Delivery of the finished product, this option is not accepted
    Kindly suggest the other options / settings / processes, to meet this requirement
    Thank you for your time and efforts.
    With Best Regards,
    Senthil

    Closing this thread
    Thanks
    Senthil

  • How  to create one delivery for two sales orders?

    Hi Experts,
    I need to create one delivery for two sales orders. But it fails.
    The route, shipping point, ship to party are same for both orders but INCOTERMS are different.
    Delivery date, Good issue date, loading date,material availability date, transportation planning date for 1st order is 12/07/11 and for second order is 14/07/11.
    I have created delivery on 14/07/2011 but the delivery is created for 1st order only, the second order is missing in the delivery.
    It not happened because of incorterms.? different dates
    Kindly help regarding this.
    Thanks
    Raghu

    Hi
    To understand splitting behavior, see SAP Note 546668 - FAQ: Delivery split when creating deliveries. And yes, incoterms happens.
    I think that with the help of question 6 you can try to force the merging of SO. Then, see SAP Note 166397 - Delivery split according to customer field ZUKRL, and handling the field ZUKRL in a VOFM in the copy rule I think that you can try to do it.
    Finally See  Note 4505 - Duprec when adding delivery (VL04, VL01, VL10*) to avoid problems while you are merging.
    Regards
    Eduardo

  • Pricing determination for creating sales order using BAPI

    Hi,
      I am using BAPI_SALESORDER_CREATEFROMDAT2 for creating sales order. I am filling conditions structures
    'BAPICOND' and 'BAPICONDX' .
          fs_order_conditions_in-itm_number = '00010'.
          fs_order_conditions_in-cond_type  = 'ZNTP'.
          fs_order_conditions_in-cond_value = zsalesinput-price.
          fs_order_conditions_in-currency   = 'INR'.
          append fs_order_conditions_in to order_conditions_in.
          fs_order_conditions_inx-itm_number = '00010'.
          fs_order_conditions_inx-cond_type  = 'ZNTP'.
          fs_order_conditions_inx-cond_value = 'X'.
          fs_order_conditions_inx-currency   = 'X'.
         fs_order_conditions_inx-updateflag   = 'U'.
          append fs_order_conditions_inx to order_conditions_inx.
    I am filling the conditions table with above mentioned fields.
    Sales order is getting created successfully but I am getting two condition records in the conditions tab of sales order, one which is filled using the BAPI and the other one which is automatically picked by the system. Please tell me how to restrict the one which is created automatically by the system.
    Because I want the one which is created by BAPI only.
    Helpful posts will be rewarded

    Hello Manchu.
    Basically, it is an SD customizing issue. During the creation of the Sales Order you cannot "restrict" any other condition type. The SD guys must customize the condition type to allow for zero value so that the sales order is successfully created without this conition type.
    Regards,
    George

Maybe you are looking for