RAC - CRS - TieRegistry.pm can't load perl module SetDualVar.pm
Hi,
I seem to be having an issue configuring a cluster with enterprise manager grid control.
Here's the test scenario.
Test #1
- CRS installed and patched to 11.1.0.7.0 on two nodes running Windows 2003 R2 x64
- ASM installed and patched to 11.1.0.7.0 on cluster config
- DB installed and patched to 11.1.0.7.0 on cluster config
- DB created via DBCA (dropped em via emca)
- Agent 10.2.0.5.0 x64 installed on cluster config
Test #2
- CRS installed and patched to 10.2.0.4.0 on two nodes running Windows 2003 R2 x64
- ASM installed and patched to 10.2.0.4.0 on cluster config
- DB installed and patched to 10.2.0.4.0 on cluster config
- Agent installed 10.2.0.5.0 x64 on cluster config
(Note I haven't updated 10.2.0 release to 10.2.0.5.0, as this is production)
1. I'm receiving the following in Critical Alerts, and its showing Pending Status in target list.
2. Both test scenarios produce similar error and showing pending status.
3. Note that SetDualVar.pm is non-existent in any %ORACLE_HOME%/perl
Target pre-db-crs
Type Cluster
Metric Clusterware
Collection Timestamp Jun 10, 2009 2:47:06 PM
Error Type Collection Failure
Message em_error=ERROR|Can't locate SetDualVar.pm in @INC (@INC contains: c:\oracle\product\10.2.0\agent10g\\perl\5.8.3\bin\MSWin32-x64-multi-thread c:\oracle\product\10.2.0\agent10g\perl\lib c:\oracle\product\10.2.0\agent10g\perl\lib\site_perl c:\oracle\product\10.2.0\agent10g\perl\site\lib c:\oracle\product\10.2.0\agent10g\sysman\admin\scripts c:\oracle\product\10.2.0\agent10g\sysman\admin\scripts\Net-DNS-0.48\lib c:\oracle\product\10.2.0\agent10g\bin c:\oracle\product\10.2.0\agent10g\bin c:/oracle/product/10.2.0/agent10g/perl/5.8.3/lib/MSWin32-X64-multi-thread c:/oracle/product/10.2.0/agent10g/perl/5.8.3/lib c:/oracle/product/10.2.0/agent10g/perl/site/5.8.3/lib/MSWin32-X64-multi-thread c:/oracle/product/10.2.0/agent10g/perl/site/5.8.3/lib .) at c:/oracle/product/10.2.0/agent10g/perl/site/5.8.3/lib/MSWin32-X64-multi-thread/Win32/TieRegistry.pm line 42. em_error=ERROR|Failed Execution
Any ideas?
Thanks.
Edited by: Kaz on Jun 10, 2009 11:05 AM
I'm curious, did you ever find a resolution to this? I'm experiencing a similar issue, but on slightly different platform:
Agents:
2-node RAC cluster on Windows Server Enterprise 2003 SP2
RDBMS/CRS version 10.2.0.4 (was also occurring on 10.2.0.3), CPU July 2009
Grid Control agent version 10.2.0.5
OMS:
Windows Server Enterprise 2003 SP2
RDBMS/Repository 10.2.0.4 CPU July 2009
Grid Control 10.2.0.5
From emagent_perl.trc:
has_metrics.pl: Fri Sep 25 15:21:23 2009: ERROR: ERROR:has::Common:: Can't locate SetDualVar.pm in @INC (@INC contains: E:\oracle\product\10.2.0\agent10g\\perl\5.8.3\bin\MSWin32-x86-multi-thread E:\oracle\product\10.2.0\agent10g\perl\lib E:\oracle\product\10.2.0\agent10g\perl\lib\site_perl E:\oracle\product\10.2.0\agent10g\perl\site\lib E:\oracle\product\10.2.0\agent10g\sysman\admin\scripts E:\oracle\product\10.2.0\agent10g\sysman\admin\scripts\Net-DNS-0.48\lib E:\oracle\product\10.2.0\agent10g\bin E:\oracle\product\10.2.0\agent10g\bin E:/oracle/product/10.2.0/agent10g/perl/5.8.3/lib/MSWin32-x86-multi-thread E:/oracle/product/10.2.0/agent10g/perl/5.8.3/lib E:/oracle/product/10.2.0/agent10g/perl/site/5.8.3/lib/MSWin32-x86-multi-thread E:/oracle/product/10.2.0/agent10g/perl/site/5.8.3/lib .) at E:/oracle/product/10.2.0/agent10g/perl/site/5.8.3/lib/MSWin32-x86-multi-thread/Win32/TieRegistry.pm line 42.
has_metrics.pl: Fri Sep 25 15:21:23 2009: ERROR: HAS:Failed execution in fnexitfail
I just submitted a TAR & will let you know if I find out anything.
Similar Messages
-
I'm using php 5.2.0-1, lighttpd 1.4.12-1, mysql 5.0.26-1, libmysqlclient 5.0.26-1 and php-cgi 5.1.6-1 on server and phpMyAdmin says that php can't load mysql module, other websites doesn't have any connection to mysql database too. I've checked php.ini - mysql.so and mysqli.so is uncommented. Only one thing helps - reverting to php 5.1.6-2.
cactus wrote:just run abs.. copy the php-cgi directory to your home..
modify the version, and built it yourself.
Compiled, installed and it works Thanks -
[Sloved] Can't load wl module for b43 wireless card
I'm trying to run b43 on my arch.
But i can't load wl module.
Below i put output from my broadcom-wl installation
My installaction stucks on modprobe wl. This command does not stop.
Ps: I forgot to tell that i must install kernel 3.10
testing/linux 3.10.1-1 (base) [installed]
core/linux 3.9.9-1 (base) [installed: 3.10.1-1]
and system don't want to turn off.
what logs will be helpful?
How to check which kernel is run?
[skoczo@localhost broadcom-wl]$ sudo pacman -R broadcom-wl
checking dependencies...
Packages (1): broadcom-wl-5.100.82.112-13
Total Removed Size: 1.07 MiB
:: Do you want to remove these packages? [Y/n]
(1/1) removing broadcom-wl [############################] 100%
[skoczo@localhost broadcom-wl]$ makepkg -f
==> Making package: broadcom-wl 5.100.82.112-13 (Mon Jul 15 21:32:50 CEST 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found hybrid-portsrc_x86_32-v5_100_82_112.tar.gz
-> Found modprobe.d
-> Found license.patch
-> Found linux-recent.patch
==> Validating source files with sha1sums...
hybrid-portsrc_x86_32-v5_100_82_112.tar.gz ... Passed
modprobe.d ... Passed
license.patch ... Passed
linux-recent.patch ... Passed
==> Extracting sources...
-> Extracting hybrid-portsrc_x86_32-v5_100_82_112.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
patching file Makefile
patching file src/include/bcmutils.h
patching file src/wl/sys/wl_cfg80211.c
patching file src/wl/sys/wl_iw.h
patching file src/wl/sys/wl_linux.c
patching file src/wl/sys/wl_linux.c
Hunk #1 succeeded at 244 (offset 4 lines).
make: Entering directory `/usr/src/linux-3.10.1-1-ARCH'
CFG80211 API is prefered for this kernel version
Using CFG80211 API
CC [M] /home/skoczo/Pobrane/broadcom-wl/src/src/shared/linux_osl.o
CC [M] /home/skoczo/Pobrane/broadcom-wl/src/src/wl/sys/wl_linux.o
CC [M] /home/skoczo/Pobrane/broadcom-wl/src/src/wl/sys/wl_cfg80211.o
LD [M] /home/skoczo/Pobrane/broadcom-wl/src/wl.o
Building modules, stage 2.
CFG80211 API is prefered for this kernel version
Using CFG80211 API
MODPOST 1 modules
LD [M] /home/skoczo/Pobrane/broadcom-wl/src/wl.ko
make: Leaving directory `/usr/src/linux-3.10.1-1-ARCH'
==> Entering fakeroot environment...
==> Starting package()...
==> Tidying install...
-> Purging unwanted files...
-> Compressing man and info pages...
-> Stripping unneeded symbols from binaries and libraries...
==> Creating package "broadcom-wl"...
-> Generating .PKGINFO file...
-> Adding install file...
-> Generating .MTREE file...
-> Compressing package...
==> Leaving fakeroot environment.
==> Finished making: broadcom-wl 5.100.82.112-13 (Mon Jul 15 21:33:05 CEST 2013)
[skoczo@localhost broadcom-wl]$ su
Password:
[root@localhost broadcom-wl]# pacman -U broadcom-wl-5.100.82.112-13-i686.pkg.tar.xz
loading packages...
resolving dependencies...
looking for inter-conflicts...
Packages (1): broadcom-wl-5.100.82.112-13
Total Installed Size: 1.07 MiB
:: Proceed with installation? [Y/n]
(1/1) checking keys in keyring [############################] 100%
(1/1) checking package integrity [############################] 100%
(1/1) loading package files [############################] 100%
(1/1) checking for file conflicts [############################] 100%
(1/1) checking available disk space [############################] 100%
(1/1) installing broadcom-wl [############################] 100%
[root@localhost broadcom-wl]# pacman -Ss broadcom
extra/bluez-firmware 1.2-7
Firmwares for Broadcom BCM203x and STLC2300 Bluetooth chips
[root@localhost broadcom-wl]# pacman -Q broadcom
error: package 'broadcom' was not found
[root@localhost broadcom-wl]# pacman -Q wl
error: package 'wl' was not found
[root@localhost broadcom-wl]# modprobe wl
_______STUCK__________
Last edited by skoczo (2013-07-16 17:49:53)lspci -nn
0:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03)
00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] [8086:2828] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
04:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
0f:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
0f:06.1 FireWire (IEEE 1394) [0c00]: Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller [104c:803a]
0f:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
0f:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
lsmod
Module Size Used by
joydev 7339 0
iTCO_wdt 4471 0
iTCO_vendor_support 1545 1 iTCO_wdt
pcmcia 40181 0
snd_hda_codec_realtek 30689 1
wl 2427712 1
acer_wmi 21383 0
mperf 991 0
sparse_keymap 2582 1 acer_wmi
uvcvideo 63657 0
coretemp 4926 0
tg3 139344 0
videobuf2_vmalloc 2604 1 uvcvideo
microcode 9872 0
videobuf2_memops 1683 1 videobuf2_vmalloc
videobuf2_core 24309 1 uvcvideo
ptp 6844 1 tg3
pcspkr 1487 0
i915 509478 2
psmouse 85971 0
pps_core 7728 1 ptp
videodev 84340 2 uvcvideo,videobuf2_core
libphy 17299 1 tg3
lib80211 3037 1 wl
media 8577 2 uvcvideo,videodev
cfg80211 339155 1 wl
snd_hda_intel 29956 0
rfkill 12682 2 cfg80211,acer_wmi
evdev 7528 11
serio_raw 3969 0
i2c_i801 9873 0
of_i2c 1774 1 i2c_i801
wmi 7099 1 acer_wmi
snd_hda_codec 126979 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
yenta_socket 30036 0
snd_pcm 63876 2 snd_hda_codec,snd_hda_intel
pcmcia_rsrc 9064 1 yenta_socket
pcmcia_core 11892 3 pcmcia,pcmcia_rsrc,yenta_socket
snd_page_alloc 5974 2 snd_pcm,snd_hda_intel
snd_timer 14942 1 snd_pcm
snd 44383 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
nsc_ircc 12533 0
soundcore 4386 1 snd
lpc_ich 11197 0
irda 88855 1 nsc_ircc
crc_ccitt 1095 1 irda
drm_kms_helper 31518 1 i915
ac 2668 0
thermal 7144 0
drm 186917 3 i915,drm_kms_helper
video 10027 2 i915,acer_wmi
i2c_algo_bit 4583 1 i915
i2c_core 19967 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,of_i2c,videodev
intel_agp 8720 1 i915
intel_gtt 10172 3 i915,intel_agp
agpgart 22047 3 drm,intel_agp,intel_gtt
battery 5557 0
button 3685 1 i915
processor 24819 1
ext4 413470 2
crc16 1091 1 ext4
mbcache 4290 1 ext4
jbd2 68896 1 ext4
sr_mod 13055 0
cdrom 29900 1 sr_mod
sd_mod 28214 4
ata_generic 2434 0
pata_acpi 2367 0
ata_piix 20824 3
libata 149195 3 pata_acpi,ata_generic,ata_piix
scsi_mod 108388 3 libata,sd_mod,sr_mod
sdhci_pci 9751 0
sdhci 25111 1 sdhci_pci
tifm_7xx1 4253 0
firewire_ohci 27494 0
mmc_core 85568 2 sdhci,sdhci_pci
tifm_core 3865 1 tifm_7xx1
firewire_core 44439 1 firewire_ohci
crc_itu_t 1095 1 firewire_core
ehci_pci 3404 0
uhci_hcd 21448 0
ehci_hcd 42520 1 ehci_pci
usbcore 151915 4 uhci_hcd,uvcvideo,ehci_hcd,ehci_pci
usb_common 1172 1 usbcore
pacman -Qs broad
local/broadcom-wl 5.100.82.112-13
Broadcom 802.11abgn hybrid Linux networking device driver
local/mobile-broadband-provider-info 20120614-1
Network Management daemon
local/modemmanager 0.7.991-1
Mobile broadband modem management service
ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: irda0: <NOARP> mtu 2048 qdisc noop state DOWN mode DEFAULT qlen 8
link/irda 00:00:00:00 brd ff:ff:ff:ff
3: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT qlen 1000
link/ether 00:1d:72:2a:a7:45 brd ff:ff:ff:ff:ff:ff
uname -a
Linux localhost 3.10.1-1-ARCH #1 SMP PREEMPT Sun Jul 14 11:47:37 CEST 2013 i686 GNU/Linux -
CD Install: Can't load tod module
Seems like it only happens on Sun Fire Server.
I am using hyperterminal for the installation.
This is the error message I keep getting:
Executing last command: boot cdrom
Boot device: /pci@1f,0/ide@d/cdrom@3,0:f File and args:
SunOS Release 5.8 Version Generic_108528-11 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
(Can't load tod module) Program terminated
ok
Any suggestion would be appreciated.
ThanksHi
I've only seen this on Netra servers. The problem is down to the hardware revision of Solaris that
you are using and the processor speed on the host.
You need to use an "Operating Environment" CD that should have come with your server if you
are building the server with an early version of Solaris 8. Use this CD first to "boot cdrom", it will then ask you for some basic info after which, it will prompt you for the original Solaris CDs that you have.
Probably the best solution ( and you don't have to use the Operating Environment CD) is to use the last revision of Solaris 8 which I think is 2/02.
regards -
(Can't load tod module) Program terminated ?
Hi
I have a NetraX1 500 mhz, and i reinstalled Solaris 8. Now when I boot up I get this error:
Executing last command: boot
Boot device: disk File and args:
SunOS Release 5.8 Version Generic_108528-07 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
(Can't load tod module) Program terminated
ok
Does anyone know what is wrong here?
Thanks
-jche Netra X1 won't even boot from the image, with a "can't load tod module"
error.
A fresh jumpstart image with the latest mis.netra-x1.....zip file does
work. The latest zip file is named mis.netra-x1.259-3836-03.zip .
The way to access them is to start with http://www.sun.com/netra , click
on NETRA SOLUTIONS in the table, click on Sun Solutions, and then Software
Drivers in the Netra X! Software Drivers column.
Hope this helps.
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support -
I have just cloned a Solaris 8 system onto a V240 using jumpstart - the installation worked fine, but on reboot I get this error message:
Rebooting with command: boot
Boot device: disk File and args:
SunOS Release 5.8 Version Generic_108528-18 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
(Can't load tod module) Program terminated
{0} ok
Any help would be appreciated.That looks like a generic message that indicates you have the wrong version of Solaris 8 loaded. Minimum for V240 is Solaris 8 12/02.
cd to the JumpStart directory on you server and do a "more" or "cat" on the release file
example: more Solaris8/Product/SUNWsolnm/reloc/etc/release -
[SOLVED] pacman -Syu on 10/17/2012, systemd can't load kernel modules
Ok, I did a [pacman -Syu] on my laptop, and everything went well. So I decided to upgrade my PC as well, did a reboot and then couldn't ssh into it.
Had to access the machine, and found
# systemctl --failed
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
[email protected] loaded failed failed dhcpcd on eth0
httpd.service loaded failed failed Apache Web Server
systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
3 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
so it failed to load kernel modules...
# systemctl status systemd-modules-load.service
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Wed, 17 Oct 2012 18:27:11 -0400; 45min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 102 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
CGroup: name=systemd:/system/systemd-modules-load.service
Oct 17 18:27:11 MyHost systemd[1]: Failed to start Load Kernel Modules.
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
... then I checked network devices
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
# ip addr show dev eth0
Device "eth0" does not exist.
... then the modules; and I saw that none appeared for the Ethernet...
# lspci -v | grep Ethernet -A8
00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2)
Subsystem: Hewlett-Packard Company Device 2a6c
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
I/O ports at fc00 [size=8]
Capabilities: [44] Power Management version 2
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
... whereas they did for other devices
# lspci -v | grep Kernel
Kernel driver in use: ohci_hcd
Kernel driver in use: ehci_hcd
Kernel driver in use: sata_nv
Kernel driver in use: sata_nv
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: nouveau
I'm guessing it's probably something with the new image after the pgrade, but I don't know which module to load nor do I
understand why systemd isn't loading the modules when it was working stable enough to act as a headless server before. However, I've only been a week or so with systemd and might have overlooked something in the configs. Any help or insight would be greatly appreciated. Please. I'm desperate.
Last edited by confusion-is-my-sedative (2012-10-26 21:30:01)Yep, I got that far, and tried the same advice from a different user with a 'tee' command which did the same thing, but unfortunately the forcedeth module can't be loaded because its in a different directory than the 'uname -r' specification allows modprobe to search for. I posted my attempts here: https://bbs.archlinux.org/viewtopic.php?pid=1181940
-
[SOLVED] Can't load this module??
Ok, I discovered why I have no eth0 device. I have an
Nvidia MCP61 Ethernet card, according to lscpi -v
and no associated "Kernel" modules.
The necessary Ethernet driver for that Nvidia card is forcedeth
however
# modprobe forcedeth
FATAL: Module forcedeth not found.
but if I perform a systemwide find..
I get
/usr/lib/modules/3.6.2-1-ARCH/kernel/drivers/net/ethernet/nvidia/forcedeth.ko.gz
but according to 'man modprobe' the modprobe program looks in the /lib/modules/'uname -r' directory
and when I run
# uname -r
3.5.6-1-ARCH
I can cleary see why modprobe didn't work since according to the previous "find" there is no "forcedeth" in that directory.
so I tried
# modprobe -S 3.6.2-1-ARCH
Error: missing parameters. See -h.
to tell modprobe to search in that directory instead, but despite different variations I couldn't change the version sucessfully.
So instead I tried copying the "forcedeth.ko.gz" to the /lib/modules/3.5.6-1-ARCH directory
and I still haven't been able to "modprobe" it, even with full pathname and force option provided.
So, in summation, I had the driver in the wrong directory according to 'uname -r' and thus I couldn't
load it. I tried to manually give modprobe a different kernel version, without sucess, and have tried
copying forcedeth.ko.gz to the directory which corresponded to /lib/modules/'uname -r'.
I guess I need to either
- upgrade the kernel without an internet connection?
- sucessfully modprobe forcedeth despite the kernel version conflict?
- maybe throw a symbolic link somewhere?
- give an explicit option to define a full path in a config file?
- do something with mkinitcpio that can specify that module and boot into that ramdisk?
Any suggestions would be greatly appreciated, since I don't know how else to load the module.
If any other info on my system might give a lead, I'd be more than happy to provide it. Thanks. I'm almost there...
Last edited by confusion-is-my-sedative (2012-10-26 21:26:06)ok, did and done. (However, note that this isn't raw code since I have to type from display of the monitor to the laptop.)
# file /boot/vmlinuz-linux
/boot/vmlinuz-linux: Linux kernel x86 boot executable bzImage, version 3.6.2-1-ARCH (tobias@T=POWA-LX) #1 SMP PREMPT Fri Oct 12 23:58, RO-rootFS, swap_dev 0x3, Normal VGA
According to file, I do have the latest kernel, which makes this even more peculiar since it isn't consistent with 'uname -r'
3.5.6-1-ARCH
and I'm using grub legacy, I think.
# cat /boot/grub/menu.1st
timeout 5
default 0
color light-blue/black light-cyan/blue
# BOOT SECTION
# (0) Arch Linux
title Arch Linux
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/xxxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx ro modeset=0
initrd /boot/initramfs-fallback.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx ro
initrd /boot/initramfs-fallback.img
I didn't post the whole config since transcribing comments with mode suggestions would be needless. But I don't think there's any danger in ommitting the '#' lines, is there? -
Can't install perl modul DBD::Oracle with XE
Hello,
I have installed oracle 10.2.0.1 XE and want now install the perl modul DBD::Oracle.
After running
perl Makefile.PL
I get the message:
Unable to locate an oracle.mk, proc.mk or other suitable *.mkfile in your Oracle installation. (I looked in
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/rdbms/lib/oracle.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/rdbms/demo/oracle.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/rdbms/demo/demo_rdbms.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/otrace/demo/atmoci.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/precomp/demo/proc/proc.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/precomp/demo/proc/demo_proc.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/proc/lib/proc.mk /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/proc16/lib/proc16.mk)
And the program is right!!
I do not have any of this files on my Computer.
I also looked in the files
oracle-instantclient-basic-10.2.0.1-1.i386.rpm
oracle-instantclient-devel-10.2.0.1-1.i386.rpm
where I also can't find these files.
Could you please help and tell me, where I can get these files?
Thank you,
MarcSee the thread on Perl with XE in Re: How can I get CPAN DBD::Oracle to install with XE?
-- cj -
IPW2100 driver can't load the module
Hi everybody,
I have an centrino Dell Inspiron 8600 and I'm trying to make working wireless hardware. I noticed that the installing of the ipw2100 with pacman produces a new directory in the /lib/modules
It's different than my kernel, seems stock kernel directory,
I'm using a compiled kernel and when I try to load the module it doesn't load it and all I see are just a couple of warnings.
My questions are:
Have I to use an stock kernel?
If yes where can I find some HowTo that explains how to use it?
(I don't like 800x600 terminal, by compiling I can decide to use 1024x768)
If not, have I to use source? I seems strange, I mean, what's pacman for? :?
Thank you guysOk, I used abs to compile my new module, now I have my module in the right place.
but when I try to load it happen this:
[root@sanctuary arael]# modprobe ipw2100
FATAL: Error inserting ipw2100 (/lib/modules/2.6.11/kernel/drivers/net/wireless/ipw2100/ipw2100.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[root@sanctuary arael]#
dmesg output is this:
ipw2100: Unknown symbol release_firmware
ipw2100: Unknown symbol request_firmware
hStart = 1328, hEnd = 1360, hTotal = 1440
vStart = 802, vEnd = 808, vTotal = 823
h_total_disp = 0x9f00b3 hsync_strt_wid = 0x4052a
v_total_disp = 0x31f0336 vsync_strt_wid = 0x60321
pixclock = 14035
freq = 7125
ipw2100: Unknown symbol release_firmware
ipw2100: Unknown symbol request_firmware
ipw2100: Unknown symbol release_firmware
ipw2100: Unknown symbol request_firmware
[root@sanctuary arael]#
Slightly OT, but in the interest of getting you back to the stock kernel - it shouldn't be necessary to recompile the kernel simply to change screen res. What prompted you to do it?
When I use stock kernel I can't recompile it...I mean it's precompiled ... or not? :?
To have 1024x768 login shell I can specify during "make menuconfig ncurses screen"... But when I use stock kernel what should I to do, pass to lilo right parameters? Othervise the default is 800x600 and I don't like it to much...but this is just my preference...and is not important...
Using ipw2100 and kernel26 precompiled does't change the situations. I have my module in the right place but modprobe says that there isn't a module called ipw2100...
To use linux I guess that people should be very smart or a guru...and supose that this is not too much my case. :?
I have also an hp usb printer that doesn't works and I don't understand why. I have to use windows to print. It's very frustrating have hardware but not be able to make it work.... -
[solved] kmod, can't load nfnetlink module
Wireshark is busted for me because nfnetlink can't load for some reason. Also
modinfo /lib/modules/3.2.0-2-ARCH/kernel/net/netfilter/nfnetlink.ko.gz
was giving me a funky error, I went back to module-init-tools so I forgot what it said, but even modprobe nfnetlink wouldn't work for me.
Last edited by nfm (2012-01-08 23:37:05)falconindy wrote:I really need to know what error you were seeing or else it can't be fixed. Please try to reproduce with kmod-3-5.
I was getting what @z0id got, "No such file or directory". With kmod 3-5 the issue appears to be fixed. Wireshark works and nfnetlink loads automatically. -
Can not load the module fglrx,Why
Today i update the ati-drivers-arch to ati-fglrx, then i usr aticonfig tools to generate xorg.conf and restart my computer. but the module fglrx does not to be loaded.
Hello,
I have problem with fglrx. Xorg can't load it.
Here is the error:
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
dlopen: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: __glXActiveScreens
(EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) UnloadModule: "fglrx"
(EE) Failed to load module "fglrx" (loader failed, 7)
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(EE) No drivers available.
Fatal server error:
no screens found
This happend after upgrading ati drivers(before switch to ati-fglrx).
Here is some info:
xorg.conf:
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/cyrillic/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
# This loads the GLX module
Load "dri" # libdri.a
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbOptions" "compose:ralt"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "radeon"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=4153
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0" # AGP locked user pages: disabled
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Device "ATI Graphics Adapter"
Identifier "Screen0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
[root@Sonic ~]# lsmod |grep fglrx
fglrx 436032 0
agpgart 29904 2 sis_agp,fglrx
[root@Sonic ~]# uname -a
Linux Sonic 2.6.15-ARCH #1 SMP PREEMPT Sun Feb 12 18:36:42 CET 2006 i686 AMD Duron(tm) Processor AuthenticAMD GNU/Linux -
Can't install perl modules for bugzilla
I'm currently attempting to install Bugzilla on my Arch server. This service depends on Perl and a collection of modules.
I attempted:
perl install-module.pl --all
... and it worked, so it seemed. However, when attempting to run my install script again, I am warned that the module DBI is not installed. I attempt to install it manually (specify it in particular with the previous command), and it says that DBI is up to date. I attempt the script again, and still get the error.
Is this a bug with Bugzilla's install script, or with the installation of Perl modules?Here is a link to a resolution in Lion. It may also solve your Mountain Lion Perl DBD issue as well.
If you run the command below before executing your Perl script the library is found and all is well!
export DYLD_LIBRARY_PATH="/usr/local/mysql/lib:$DYLD_LIBRARY_PATH"
Put this in your .bashrc or .bash_profile.
On Apple StackExchange, Matthew Weiss had another approach.
I found on another website the following command
$ sudo perl -MCPAN -e 'CPAN::Shell->notest(install => CPAN::Shell->r)'
This updated all my perl modules and all is back to normal. Not sure why or what, but don't care that it is working now. -
Loading perl module LWP::Simple causes seg fault
I just ran pacman -Syu (upgraded 400 packages and the kernel went from 3.12.9-2 to 3.16.1-1 to give an idea of the last time I updated this system).
Now when I run:
perl -e 'use LWP::Simple'
It seg faults and dumps core.
pacman says: /usr/share/perl5/vendor_perl/LWP/Simple.pm is owned by perl-libwww 6.08-1 Which is the current version. I tried reverting to 6.05-1 (the version I had previously) but it give the same result.
Checking pacman.log, I see two errors:
[2014-08-30 21:31] [PACMAN] installed perl-xml-sax-base (1.08-3)
[2014-08-30 21:31] [ALPM-SCRIPTLET] /tmp/alpm_TUIVDd/.INSTALL: line 1: 21528 Segmentation fault (core dumped) perl -MXML::SAX -e "XML::SAX->add_parser(q(XML::SAX::PurePerl))->save_parsers()" &> /dev/null
[2014-08-30 21:31] [PACMAN] installed perl-xml-sax (0.99-4)
[2014-08-30 21:31] [ALPM-SCRIPTLET] could not find ParserDetails.ini in /usr/share/perl5/vendor_perl/XML/SAX
So I uninstalled those packages and when I reinstalled, there were no errors... that didn't help.
Any ideas?I found what's causing it, but still don't know how it got there. For anyone else who has similar problems, here's how I found which module was the problem:
strace perl -e 'use LWP::Simple' |& grep '^open' | tail -1
In my case, it shows:
open("/usr/lib/perl5/site_perl/auto/Storable/Storable.so", O_RDONLY|O_CLOEXEC) = 5
I'm not sure why I have that file when I also have the proper /usr/lib/perl5/core_perl/auto/Storable/Storable.so. Perhaps I was installing stuff from CPAN and it did that to fulfill a dependency?
And it's far from the only one: I found 27 other .so duplicates in site_perl that are also in core_perl:
cd /usr/lib/perl5/site_perl
find . -name "*.so" | xargs -n1 pacman -Qo |& grep "No package owns" | cut -c24- | xargs -n1 -I{} ls -l ../core_perl/{} |& grep -v "cannot access"
Cleaning this up isn't going to be fun... I have 12 more .so's in site_perl that do NOT exist in core_perl or vendor_perl... so I can't just delete all unowned files in site_perl. -
Hi!
I haven't upgraded my system for a while and now - after a complete system update including xorg-server, kernel, etc. - I've got a system without X :-(
I've been using the OS Ati driver for a while and was quite happy with it.
It looks like the latest xorg-server has some problems with it though. It's complaining about an mtrr error. I thought I could switch to fglrx for now but the fglrx module won't load. Neither the combo of kernel/catalyst from extra, nor the one from testing nor a self built catalyst against the latest kernel in testing let me load the fglrx module. What's going on here? Help is appreciated...
Best regards, ChrisWell, I got it working. But strange enough, I still can't modprobe the newly built fglrx-module (catalyst 8.12).
So I tried the vesa driver. Check.
Then I gave the ati (OSS) driver another go, hal recognition of input devices disabled because that was were the whole mess started. Check.
Then I tried w/ hal. Check. To my surprise, keyboard and synaptics were now working (couldn't get to this point yesterday)
Changed the keyboard to "ch" and created a reasonable /usr/share/hal/fdi/policy/10osvendor/11-x11-synaptics.fdi:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">
<merge key="input.x11_driver" type="string">synaptics</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<!--<merge key="input.x11_options.VertTwoFingerScroll" type="string">false</merge>
<merge key="input.x11_options.HorizEdgeFingerScroll" type="string">false</merge> -->
<merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>
<merge key="input.x11_options.HorizEdgeScroll" type="string">true</merge>
<!--<merge key="input.x11_options.LeftEdge" type="string">1700</merge>
<merge key="input.x11_options.TopEdge" type="string">1700</merge>
<merge key="input.x11_options.RightEdge" type="string">5300</merge>
<merge key="input.x11_options.BottomEdge" type="string">4200</merge>-->
<merge key="input.x11_options.VertScrollDelta" type="string">100</merge>
<merge key="input.x11_options.MinSpeed" type="string">0.16</merge>
<merge key="input.x11_options.MaxSpeed" type="string">0.25</merge>
<!--<merge key="input.x11_options.VertTwoFingerScroll" type="string">true</merge>
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">true</merge> -->
<merge key="input.x11_options.HorizScrollDelta" type="string">40</merge>
</match>
</device>
</deviceinfo>
Cool. I'm almost happy. Some special keys don't yet behave like the used to do (like shift-insert for inserting text the way it did before) But I think I can live with that.
Thanks for the help Mr. Elendig, Wiki, bbs, google, etc
Best regards Chris
Maybe you are looking for
-
How do I import an image with an opacity mask from AI into FW
I have created a graphic in AI which contains several images with associated opacity masks. The mask use a radial gradient to achieve the desired effect. I am unable to import these images into FW with the mask effects intact even though the layers a
-
How do I get enumeration description from simple type?
Hello! I want to display the value of a simple type in a table and display the description in a tool tip for the cell, how do I do that? I'm using Web dynpro for java 7.0 ehp1. I'm using an enumeration with 5 possible values with corresponding descri
-
Latest wordpress not working on OSX server 10.4
I have had wordpress running a theme called semiologic without problems for quite some time. However, I have been trying to update with the latest version of that theme which includes the latest version of wordpress and it will not work. I continuall
-
iPad 3 screen won't rotate after ios6 update, no the screen is not in lock mode. Any ideas
-
How can i rename files on NTFS external hard drive???
I cinnected my NTFS external hard drive to my MacBook and i tried to rename some of the files but there wasn't this possibility!I never had a mac before so these is all new to me!The problem is that my external HDD is full and i cannot format it to F