Can not load the module fglrx,Why

Today i update the ati-drivers-arch to ati-fglrx, then i usr aticonfig tools to generate xorg.conf and restart my computer. but the module fglrx does not to be loaded.

Hello,
I have problem with fglrx. Xorg can't load it.
Here is the error:
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
dlopen: /usr/lib/xorg/modules/drivers/fglrx_drv.so: undefined symbol: __glXActiveScreens
(EE) Failed to load /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) UnloadModule: "fglrx"
(EE) Failed to load module "fglrx" (loader failed, 7)
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(EE) No drivers available.
Fatal server error:
no screens found
This happend after upgrading ati drivers(before switch to ati-fglrx).
Here is some info:
xorg.conf:
Section "ServerLayout"
Identifier "Server Layout"
Screen "Screen0" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local/"
FontPath "/usr/share/fonts/cyrillic/"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "type1"
Load "freetype"
# This loads the GLX module
Load "dri" # libdri.a
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
Option "AutoRepeat" "500 30"
Option "XkbRules" "xorg"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"
Option "XkbOptions" "compose:ralt"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
EndSection
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "radeon"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
# vendor=1002, device=4153
Identifier "ATI Graphics Adapter"
Driver "fglrx"
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
Option "DesktopSetup" "(null)"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x06419064"
Option "GammaCorrectionII" "0x06419064"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0" # AGP locked user pages: disabled
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Device "ATI Graphics Adapter"
Identifier "Screen0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
# initial origin if mode is smaller than desktop
# Virtual 1280 1024
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
[root@Sonic ~]# lsmod |grep fglrx
fglrx 436032 0
agpgart 29904 2 sis_agp,fglrx
[root@Sonic ~]# uname -a
Linux Sonic 2.6.15-ARCH #1 SMP PREEMPT Sun Feb 12 18:36:42 CET 2006 i686 AMD Duron(tm) Processor AuthenticAMD GNU/Linux

Similar Messages

Error --can not load the specified XML or schema source

HI All
I am facing a problem while creating a xml maps connection. i am using ms excel 2007 and xcelcious 2008 engage. when i am trying to create a xml maps connection and give my url then open then give my user id and password its says can not load the specified XML or schema source..
my url is working fine when i open it through internet explorer.
anything i miss somewhere?
please help.
Regards
Amiya

Hi Guys
This is solved i removed <?xml version="1.0" ?> from top and buttom
then it worked fine.
Regards
Amiya

I can not load the Oracle Applications Home Page E-Business Suite

I install ebs 12.1.1 on windows server 2003 and I can not load the Oracle Applications Home Page (http://ebsoracle.workshop.cl:8000)
What could be the cause?
Is there a log with information about this failure?
I check the host file and this is correct
Help me please.
Thanks.

I install ebs 12.1.1 on windows server 2003 and I can not load the Oracle Applications Home Page (http://ebsoracle.workshop.cl:8000)
What could be the cause?What is the error?
Is there a log with information about this failure?
I check the host file and this is correctCheck Apache log files (error_log* and access_log* under $LOG_HOME/ora/10.1.3/Apache directory).
Also, run AutoConfig and make sure it completes successfully.
Thanks,
Hussein

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.
Can not load the Organizer from the icon at the bottom of Editor screen, from the icon on the MacBook Air dock (OS 10.10.2), nor from the file in applications located with Finder.
I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences. I have searched on line for other options but not found any.
Can you help me?

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- If a 5G iPod
Iphone 5 lightning port charging problem - SOLUTION!
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Hello! I can not load the Mountain Lion of the App Store.

Hello! I can not load the Mountain Lion of the App Store. IMac-2009.
A few seconds of spinning circle and nothing else happens.

http://forums.adobe.com/thread/1195540

HT4356 My iPhone will print to my air printer but my 3rd generation iPad will not. It can not locate the printer. Why?

My ipone will print to my air printer but my 3rd generation iPad will not. It can not locate the printer. Why? Bother running on iOS 6.01

Use this support document http://support.apple.com/kb/ht4356 to troubleshoot AirPrint.

IPW2100 driver can't load the module

Hi everybody,
I have an centrino Dell Inspiron 8600 and I'm trying to make working wireless hardware. I noticed that the installing of the ipw2100 with pacman produces a new directory in the /lib/modules
It's different than my kernel, seems stock kernel directory,
I'm using a compiled kernel and when I try to load the module it doesn't load it and all I see are just a couple of warnings.
My questions are:
Have I to use an stock kernel?
If yes where can I find some HowTo that explains how to use it?
(I don't like 800x600 terminal, by compiling I can decide to use 1024x768)
If not, have I to use source? I seems strange, I mean, what's pacman for? :?
Thank you guys

Ok, I used abs to compile my new module, now I have my module in the right place.
but when I try to load it happen this:
[root@sanctuary arael]# modprobe ipw2100
FATAL: Error inserting ipw2100 (/lib/modules/2.6.11/kernel/drivers/net/wireless/ipw2100/ipw2100.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[root@sanctuary arael]#
dmesg output is this:
ipw2100: Unknown symbol release_firmware
ipw2100: Unknown symbol request_firmware
hStart = 1328, hEnd = 1360, hTotal = 1440
vStart = 802, vEnd = 808, vTotal = 823
h_total_disp = 0x9f00b3 hsync_strt_wid = 0x4052a
v_total_disp = 0x31f0336 vsync_strt_wid = 0x60321
pixclock = 14035
freq = 7125
ipw2100: Unknown symbol release_firmware
ipw2100: Unknown symbol request_firmware
ipw2100: Unknown symbol release_firmware
ipw2100: Unknown symbol request_firmware
[root@sanctuary arael]#
Slightly OT, but in the interest of getting you back to the stock kernel - it shouldn't be necessary to recompile the kernel simply to change screen res. What prompted you to do it?
When I use stock kernel I can't recompile it...I mean it's precompiled ... or not? :?
To have 1024x768 login shell I can specify during "make menuconfig ncurses screen"... But when I use stock kernel what should I to do, pass to lilo right parameters? Othervise the default is 800x600 and I don't like it to much...but this is just my preference...and is not important...
Using ipw2100 and kernel26 precompiled does't change the situations. I have my module in the right place but modprobe says that there isn't a module called ipw2100...
To use linux I guess that people should be very smart or a guru...and supose that this is not too much my case. :?
I have also an hp usb printer that doesn't works and I don't understand why. I have to use windows to print. It's very frustrating have hardware but not be able to make it work....

Can not load the Sonivox 250 Meg GM Wave table into soundfonts manag

I have an Creative Xi-FI platnium and no matter what I try I can NOT load this sound font.. I can load it into Vienna soundfont manager.. I have tried adjusting the cache level (I have 2 GB of RAM BTW in my system), I keep getting an error can not load. Please HELP!!! I even tried the registry edit.. It did not help one bit.. appears its an issue with the program! What should I do?

hmmm for some reason when you call your EJB and it throws an exception, the JTA transaction is marked as rollbakc so the BPEL EM engine fails to save the instance.
Could you please provide us some additional pieces of information:
obversion.bat.
The exact exception that your EJB throws.
JTA configuration of your bean
Have you looked at the BankTransfer demo?
Edwin

How do I find the bookmarks file when I can not load the application? I.e., I can not get to the library.

My laptop died. The hard drive is in a case and accessible. It is connected to a 10 year old Pentium. How can I retrieve the bookmarks file from the Laptops drive when I can not load Firefox from that drive? I.e., I can not get to the library on the Laptop drive. I do have full access to it.

You can locate main bookmarks file, '''places.sqlite''', for restoration in another Firefox install, in your profile directory.
Since you profile is on another hard drive, the normal shortcuts to find it won't work.
On Windows XP, you can find the profile here:
''C:''\Documents and Settings\''Windows login/user name''\Application Data\Mozilla\Firefox\Profiles\''xxxxxxxx.default''
Where:
* C:\ is replaced by the drive letter you mounted the laptop drive on.
* Windows login/username is replaced with your windows user name you used on that hard drive.
* xxxxxxxx.default is replaced with 8 random characters followed by .default, and should be the only folder in Profiles.
Once you've found the old profile, you can copy files over to a new profile. See https://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile and [[Recovering important data from an old profile]] for other files you may want to restore.

I can not access the editing panel, why?

I've brought in my various files and am ready to start dragging and dropping my video and audio viles into the editing area. I can not get the editing area to open up.. It says timeline no sequence. I can not figure out how to get
to where it shows me video and audio tracks. I have reset current workspace and openned and closed project.
HELP!!

yup ---- RTFM ;-))))
Here is the icon

Why can not load the Linux System?

I want to install Linux as the second OS on my notebook.I downloaded the Fedora8 software on the C: partition and decompressed it on the C: partition too. Then I copied and decompressed the file "isolinux " on the D: partition.
I installed the software "grub4dos" and made some changes in the document: \boot\grub\menu.lst. When I restart the computer and choose the Fedora8 from the loader menu, the Linux installation process can not be started and show the follow message:"Because follow document is lost,you can not start Windows:<Winder root>\system32\hal.dll. please copy it on."
What is the reason?
Message was edited by:
frank.qian

Hi,
I suppose it caused by grub4dos utility. Could you try using WinGrub?
Regards
Terry

Firefox 4 does not load the modules in the Netvibes website. I've checked it on 5 pc's and all are encounting the same issue.

We utilize Netvibes at work and the modules which are like snipets of webpages do not load with Firefox 4, so we are stuck with Firefox 3.6.8, dues to after this verstion, Netvibes does not work on any further updated versions or Firefox 4.

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

I can not load "status-4-evar". why?

When I look at the list of add-ons supposedly on my system, I see Fox reminder, WOT, grease monkey, but i can not find where "status -4-evar has loaded. what am i missing? Several of the tools I used all the time have been eliminated from the new version. i will never trust you again to provide a new version without telling me in advance what you are going to do to my system. I might as well use "Last Pass" and Google . I need your help with "status-4-evar, or I am out of here and will delete Firefox.

THIS IS IT: I had all of these problems with my iPad 2 and my Apple TV 2. If the above response did not work for you (which it didn't for me), give this a shot. I just got off the phone with Apple. You need to:
unplug your Apple TV 2
Use a micro USB chord (most phones/cameras use them as chargers) and plug the apple tv directly into a computer that is running iTunes.
Once the Apple TV is recognized it will ask to restore.
Click Restore and follow the prompts.
This will reset your Apple TV but install the latest firmware 4.4 on it.
If you're like me, my Apple TV 2 came with 4.1 and 4.4 will not update over the internet. It MUST be plugged into iTunes through a computer and updated manually.
After this was done, I was able to mirror flawlessly.
Hope this helps anyone in my situation.

Can not load the Database Home page

I have installed the database on a XP sp2 computer. After the installation is complete I try to open the database home page using the short cut created by the installation program and I receive an error from in I.E. The page can not be displayed. I tried to connect using the Run SQL command line by typing "connect system/password (My system password create in the installation)" and I receive another set of errors:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist

Hi,
did the installation complete without errors?
Check the logfiles for "ORA-" messages:
cd D:\Oracle\XE\app\oracle\product\10.2.0\server\config\log
D:\Oracle\XE\app\oracle\product\10.2.0\server\config\log>grep "ORA-" *
cloneDBCreation.log:ORA-01109: Datenbank nicht geoffnetThis is what it looks like after my install on XP, the one message is ok.
What about the user accounts you used for the install?
Was the install user a local admin user on your machine?
What does the command net localgroup ORA_DBA say?
Is the user you are trying to connect to the XE db a member of this local group?
Here is the output from my machine:
D:\Oracle\XE\app\oracle\product\10.2.0\server\config\log>net localgroup ORA_DBA
Aliasname ORA_DBA
Beschreibung Members can connect to the Oracle database as a DBA without a password
Mitglieder
Dietmar Aust
NT-AUTORITÄT\SYSTEM
~Dietmar.

I can not load the newest version of flashplayer.

I am unable to load the newest version of flashplayer. When I try it will not allow me to do anything and it keeps crashing.

http://forums.adobe.com/thread/1195540

Can not load the module fglrx,Why

Similar Messages

Maybe you are looking for