RAC Instalation ip configuration problem

i have three server with same subnet mask. save os and db versiong windows server 2003 and 10g on all servers.
server-1
ip address : 192.168.0.29
ubnet mask : 255.255.254.0
computer name : maindb
server-2
ip address : 192.168.0.92
ubnet mask : 255.255.254.0
computer name : procdb
server-3
ip address : 192.168.0.93
ubnet mask : 255.255.254.0
computer name : stitchdb
Please guide me how i can configure system32\dirvers\etc\hosts file.
Thanks in advance.

I am not sure, what you are exactly looking for, since the hosts file itself has the information on how to add new hosts/ipaddress to the file, which is something like:
<Ip_address> <Hostname>
192.168.0.29 maindb
If you are look for rac configuration, apart from the physical IP Addresses, you would be needing two others - which are 1) Private IP Address - and 2) VIPA, which needs to be configured in the same hosts file on all the participating nodes.
HTH
Thanks
-Chandra Pabba

Similar Messages

  • RAC Instalation (IP Configuration)

    Hello,
    I am facing problem for 11g Cluster Installing on MS Server 2003 . following ip available for LAN
    192.168.1.231
    192.168.1.232
    192.168.1.233
    192.168.1.240
    Our Subnet Mask is 255.255.254.0
    Please guide me how i configure host file and what subnet mask i have to assign rac should be reach to all ips 192.168.0-255 and 192.168.1.0-255
    Thanks in Advance

    Check Check Network Requirements and IP Address Requirements and then run the following to verify configuration:
    runcluvfy.bat stage -pre crsinst -n <node_list>

  • Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

    What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

    You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

  • Audio Configuration problem detected after install

    During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

    Perhaps this Apple KnowledgeBase article will help:
    iTunes 7 for Windows: iTunes has detected an audio configuration problem
    Hope that helps.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
    Regards.

  • RAC Instalation Problem (shared accross all the nodes in the cluster)

    All experts
    I am trying for installing Oracle 10.2.0 RAC on Redhat 4.7
    reff : http://www.oracle-base.com/articles/10g/OracleDB10gR2RACInstallationOnLinux
    All steps successfully completed on all nodes (rac1,rac2) every thing is okey for each node
    on single node rac instalation successfull.
    when i try to install on two nodes
    on specify Oracle Cluster Registry (OCR) location showing error
    the location /nfsmounta/crs.configuration is not shared accross all the nodes in the cluster. Specify a shared raw partation or cluster file system file that is visible by the same name on all nodes of the cluster.
    I create shared disks on all nodes as:
    1 First we need to set up some NFS shares. Create shared disks on NAS or a third server if you have one available. Otherwise create the following directories on the RAC1 node.
    mkdir /nfssharea
    mkdir /nfsshareb
    2. Add the following lines to the /etc/exports file. (edit /etc/exports)
    /nfssharea *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
    /nfsshareb *(rw,sync,no_wdelay,insecure_locks,no_root_squash)
    3. Run the following command to export the NFS shares.
    chkconfig nfs on
    service nfs restart
    4. On both RAC1 and RAC2 create some mount points to mount the NFS shares to.
    mkdir /nfsmounta
    mkdir /nfsmountb
    5. Add the following lines to the "/etc/fstab" file. The mount options are suggestions from Kevin Closson.
    nas:/nfssharea /nfsmounta nfs rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,wsize=32768,actimeo=0 0 0
    nas:/nfsshareb /nfsmountb nfs rw,bg,hard,nointr,tcp,vers=3,timeo=300,rsize=32768,wsize=32768,actimeo=0 0 0
    6. Mount the NFS shares on both servers.
    mount /mount1
    mount /mount2
    7. Create the shared CRS Configuration and Voting Disk files.
    touch /nfsmounta/crs.configuration
    touch /nfsmountb/voting.disk
    Please guide me what is wrong

    I think you did not really mount it on the second server. what is the output of 'ls /nfsmounta'.
    step 6 should be 'mount /nfsmounta', not 'mount 1'. I also don't know if simply creating a zero-size file is sufficient for ocr (i have always used raw devices, not nfs for this)

  • SOA Suite 11g HA install and EDNDataSource problem

    Hi all,
    We have installed and configured Oracle SOA Suite 11g (11.1.1.5) cluster per the instructions in the Enterprise Deployment Guide and Anthony Reynold's blog (http://blogs.oracle.com/reynolds/entry/installing_an_11g_soa_cluster). We are encountering constant XA and DBLocker related errors with the EDNDataSource:
    <Dec 1, 2011 2:35:29 AM MST> <Error> <JDBC> <BEA-001112> <Test "SELECT 1 FROM DUAL" set up for pool "EDNDataSource" failed with exception: "oracle.jdbc.xa.OracleXAException".>
    <Dec 1, 2011 2:35:29 AM MST> <Error> <oracle.soa.mediator.common.listener> <BEA-000000> <DBLocker caught exception while locking messages
    java.lang.NullPointerException
    at oracle.tip.mediator.common.error.ErrorDBLocker.lock(ErrorDBLocker.java:82)
    at oracle.tip.mediator.common.listener.DBLocker.lockMessages(DBLocker.java:113)
    at oracle.tip.mediator.common.listener.DBLocker.run(DBLocker.java:77)
    at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:120)
    at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
    at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
    These errors occur every couple of seconds on both SOA hosts. Additionally, we see errors on one of the hosts, complaining about EDNDataSource not being clusterable:
    <Dec 1, 2011 2:35:29 AM MST> <Error> <Cluster> <BEA-000123> <Conflict start: You tried to bind an object under the name weblogic.transaction.resources.SOA1.EDNDataSource_soa_domain in the JNDI tree. The object from -6284322550635925010S:soa11g-dev-1.domain.com:[8001,8001,-1,-1,-1,-1,-1]:soa11g-dev-1.domain.com,soa11g-dev-2.domain.com:soa_domain:SOA1 is non-clusterable, and you have tried to bind more than once from two or more servers. Such objects can only be deployed from one server.>
    We have ensured that the database (we are using a single Oracle 11g database instance, not RAC) has XA support enabled. Beyond this, we haven't found any leads on this forum nor the Oracle support site (we have opened an SR with Oracle). I've seen a couple of other threads related to this issue over the last year (e.g., Re: JTA - XA Rources - Rollbacks reason and What is the purpose of EDNDataSource in SOA 11g? but no resolution was ever posted.
    Does anyone have any suggestions of where to being looking to troubleshoot this issue? Any help would be most appreciated!
    Thanks,
    --Gary                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    How are you starting the server? Using start script - ./startManagedWebLogic.sh soa_server1? Make sure that classpath is getting set properly.Yes, after using the script to start the admin server.
    How do I make sure the classpath is getting set properly? Seems to be the actual problem, but from the logs when the server starts up the command seems correct from what I can see. If I knew which jars contained the classes it needed I could try and look for them in the start command.
    11g is not certified on Ubuntu. Please refer below link for certification matrix -I actually wished Oracle could certify the installers for Mac OSX (just for development), but I guess I could try and get things up on Redhat instead. :P
    Thanks for the input.

  • Oracle database 10g RAc an ASM configuration

    Hi all,
    I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
    Our materials are bellow:
    Hardware: RP 3440 (HP)
    OS : HPUX 11i Ver 1
    Storage: EVA 4000 (eva disk group)
    The problem is:
    Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
    But we want to use Oracekl Clusterware + RAC + ASM
    My question is if anybody know what is the best configuration, we want to use ASm.
    Can we use HP serviguard and ASM.
    Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
    Thanks for your help.
    Regards.
    raitsarevo

    Hello,
    there's no extra RAC software package, but the option is only offered, if one of the supported cluster layers for the respective OS has been installed before.
    10.1.0.3 looks like a complete redesign, but anyway it is a patch, you have to install 10.1.0.2 first.

  • Oracle database 10g RAC and ASM configuration

    Hi all,
    I want to ask to everybody something about Oracle 10g RAC and ASm configuration. We plan to migrate to Oracle 10g from 9i, and we will begin configuring oracle but we have to decide which configuration are the best.
    Our materials are bellow:
    Hardware: RP 3440 (HP)
    OS : HPUX 11i Ver 1
    Storage: EVA 4000 (eva disk group)
    The problem is:
    Our supplier recommand us to use HP serviguard + HP serviceguard extension for RAC+ RAc and Raw device as configuration.
    But we want to use Oracekl Clusterware + RAC + ASM
    My question is if anybody know what is the best configuration, we want to use ASm.
    Can we use HP serviguard and ASM.
    Some documentations or link explain oracle RAC and ASM configuration will be appreciate.
    Thanks for your help.
    Regards.
    raitsarevo

    Hello,
    there's no extra RAC software package, but the option is only offered, if one of the supported cluster layers for the respective OS has been installed before.
    10.1.0.3 looks like a complete redesign, but anyway it is a patch, you have to install 10.1.0.2 first.

  • Oracle 10g rac install on vmware with server 2003 error

    INFO: Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 1: rac2 rac2-priv rac2
    node 2: rac1 rac1-priv rac1
    Creating OCR keys for user 'administrator', privgrp ''..
    Operation successful.
    Now formatting voting device: \\.\votedsk1
    Format of 1 voting devices complete.
    Step 1: checking status of CRS cluster
    Step 2: creating directories (C:\oracle\product\10.2.0\crs)
    Step 3: configuring OCR repository
    Step 4: configuring safe mode for CRS stack
    Step 5: Starting up CRS stack on all nodes
    rac2 service OracleCSService in improper STOPPED state, err(0)
    rac1 service OracleCSService in improper PENDING state, err(997)
    Command = C:\WINDOWS\system32\cmd /c call C:\oracle\product\10.2.0\crs/install/crssetup.config.bat has failed
    INFO: Configuration assistant "Oracle Clusterware Configuration Assistant" failed
    *** Starting OUICA ***
    Oracle Home set to C:\oracle\product\10.2.0\crs
    Configuration directory is set to C:\oracle\product\10.2.0\crs\cfgtoollogs. All xml files under the directory will be processed
    INFO: The "C:\oracle\product\10.2.0\crs\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
    1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
    2. Fix the errors causing these failures.
    3. Select the failed assistants and click the 'Retry' button to retry them.

    Pl post in the RAC install forum - RAC, ASM & Clusterware Installation
    HTH
    Srini

  • Itunes can't run bc of audio configuration problem

    Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
    So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
    Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

    the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
    perhaps let's start with the following document:
    iTunes 7 for Windows: iTunes had detected an audio configuration problem
    ... but if no joy there, try this alternate technique for swapping out your QuickTime:
    head into your Add/Remove programs. uninstall QuickTime.
    Next, we’ll manually remove any leftover program files and folders.
    1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
    2. In My Computer, open Local Disk.
    3. Open Program Files.
    4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
    5. Navigate to C:\Windows\system32\.
    6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
    7. Restart your computer.
    next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
    switch off antivirus and antispyware applications prior to the repair install.
    go into Add/Remove and select itunes. click "Change" and then click "Repair".
    if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

  • Can't run form from Form Builder 10g - Port configuration problem?

    Hi,
    I have installed the Database (10.2.0.1.0) and the Developer Suite (10.1.2.0.2) on two Linux machines (Red Hat Enterprise Linux ES 4 Basic).
    If I enter the frmservlet-URL manually everything seems to be fine.
    In one case I enter http://127.0.0.1:8890/forms/frmservlet, in the other http://127.0.0.1:8889/forms/frmservlet; in BOTH cases I get eventually a dark square and the status bar says "Applet oracle.forms.engine.Main started".
    HOWEVER, if I create a simple form with Form Builder and click on the Button with the green traffic light ("Run Form"), the form runs only on the machine where frmservlet listens on port 8890.
    On the other machine (frmservlet configured to listen on port 8889) Firefox pops up, the URL "http://127.0.0.1:32979/6dOrpwghCqnp8PhMT7KVT533m3IaArqFbPqPBOztZXWYSsNy" gets called, and nothing else happens. The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and it stays like this forever.
    I assume this is a port configuration problem, but I don't have a clue where to start.
    Any suggestions how I should proceed are greatly appreciated.
    Thank you very much in advance!

    Hi Frank,
    Thank you for your reply.
    I doublechecked my configuration.
    In the dialog Edit --> Preferences --> Runtime the Application Server URL is set to "127.0.0.1:8889/forms/frmservlet".
    However, when I attempt to run the form, the URL "http://127.0.0.1:33140/W2dwbV9eXS2fPkuKlxNhCxFWdEihwDviat2uV7ycrSotqwDN" gets called.
    The screen displays the string "ORACLE FORMS." and the status bar says "Waiting for 127.0.0.1...", and that's it.
    I wonder how the port number 33140 got selected. Interestingly, this time it is a different number; last time it was port 32979. In fact, the port number seems to change each time; I tried again and now it is 33189.
    I will now try to set the port number for the frmservlet to 8890.
    I choose Edit --> Preferences --> Runtime and set the application server URL to "127.0.0.1:8890/forms/frmservlet".
    I stop the container, open /home/oracle/OraHome_1/j2ee/DevSuite/config/default-web-site.xml and change the port number to 8890:
    <?xml version="1.0" standalone='yes'?>
    <!DOCTYPE web-site PUBLIC "Oracle Application Server 10g XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
    <!-- change the host name below to your own host name. Localhost will -->
    <!-- not work with clustering -->
    <!-- also add cluster-island attribute as below
    <web-site host="localhost" port="0" protocol="ajp13"
    display-name="Default Oracle Application Server 10g Java WebSite" cluster-island="1" >
    -->
    <web-site port="8890" protocol="http"
    display-name="Oracle Developer Suite 10g instance of Oracle Containers for J2EE Web Site">
    <!-- Uncomment the following line when using clustering -->
         <!-- <frontend host="your_host_name" port="80" /> -->
         <!-- The default web-app for this site, bound to the root -->
         <default-web-app application="default" name="defaultWebApp" root="/j2ee" />
    <!-- Do not delete this line. -->
    <web-app application="forms" name="formsweb" root="/forms" />
    <!-- -->
    <!-- <web-app application="forms" name="formsweb" root="/forms" /> -->
    <web-app application ="reports" name="web" root="/reports" />
    <web-app application = "reports" name="demo" root="/repdemo" />
         <!-- Access Log, where requests are logged to -->
         <access-log path="../log/default-web-access.log" />
    </web-site>
    I restart the container, start Form Builder, connect to the database, and open my test form.
    When attempting to run the form, the URL "http://127.0.0.1:33437/Pl0n3ky9vmU5z37A7ScBnQhsGwq3jwuzJpgTAKWPMOYIzT8K" gets called (again a new port number, apparently picked radomly within a certain range) and nothing happens: "Waiting for 127.0.0.1...".
    However, when I enter the URL http://127.0.0.1:8890/forms/frmservlet I do (eventually, after confirming that I trust the certificate etc.) get a darc rectangle and the status message "Applet oracle.forms.engine.Main started", which tells me that my setup can't be that far off target.
    Here is the output of netstat:
    [root@localhost ~]# netstat -anp --tcp
    Active Internet connections (servers and established)
    Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
    tcp 0 0 0.0.0.0:32769 0.0.0.0:* LISTEN 2779/rpc.statd
    tcp 0 0 0.0.0.0:23910 0.0.0.0:* LISTEN 5269/java
    tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 2759/portmap
    tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 4265/tnslsnr
    tcp 0 0 0.0.0.0:113 0.0.0.0:* LISTEN 2983/xinetd
    tcp 0 0 127.0.0.1:7830 0.0.0.0:* LISTEN 4429/spamd --port 7
    tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2928/cupsd
    tcp 0 0 0.0.0.0:9240 0.0.0.0:* LISTEN 5269/java
    tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 3002/sendmail: acce
    tcp 0 0 0.0.0.0:8890 0.0.0.0:* LISTEN 5269/java
    tcp 0 0 0.0.0.0:32795 0.0.0.0:* LISTEN 4231/ora_d000_orcl
    tcp 0 0 127.0.0.1:1521 127.0.0.1:32817 ESTABLISHED 4265/tnslsnr
    tcp 0 0 127.0.0.1:32817 127.0.0.1:1521 ESTABLISHED 4209/ora_pmon_orcl
    tcp 0 0 127.0.0.1:33425 127.0.0.1:1521 ESTABLISHED 5298/frmbld
    tcp 0 0 127.0.0.1:1521 127.0.0.1:33425 ESTABLISHED 5311/oracleorcl
    tcp 1 0 80.133.127.83:33485 209.132.177.100:443 CLOSE_WAIT 4060/python
    tcp 1 0 80.133.127.83:33484 209.132.177.100:443 CLOSE_WAIT 4060/python
    tcp 1 0 80.133.127.83:33494 209.132.177.100:443 CLOSE_WAIT 4060/python
    tcp 1 0 80.133.127.83:33520 209.132.177.100:443 CLOSE_WAIT 4060/python
    tcp 0 0 80.133.127.83:33529 209.132.177.100:443 ESTABLISHED 4060/python
    tcp 0 0 80.133.127.83:33528 209.132.177.100:443 ESTABLISHED 4060/python
    tcp 1 0 80.133.127.83:33460 209.132.177.100:443 CLOSE_WAIT 4060/python
    tcp 1 0 80.133.127.83:33470 209.132.177.100:443 CLOSE_WAIT 4060/python
    tcp 0 0 :::22 :::* LISTEN 2968/sshd
    tcp 0 0 ::ffff:127.0.0.1:33437 :::* LISTEN 5298/frmbld
    tcp 697 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33439 CLOSE_WAIT -
    tcp 348 0 ::ffff:127.0.0.1:33437 ::ffff:127.0.0.1:33440 CLOSE_WAIT -
    [root@localhost ~]#
    The question remains: Where do those port numbers come from?
    Regards,
    jme

  • Need 11gr2 RAC install Guide on Solaris 10 x86 using containers and NFS

    I'm looking for an 11gr2 RAC install Guide on Solaris 10 x86 using 2-3 containers. I need to have the NFS server reside in the global zone or on a 3rd container visable to the two rac containers.
    Please share me installation guide!
    Thank you!
    PS - I currently have run into an install issue -
    Can't change ownership on /oracle/products/11.2.0/ocr/: not owner at /oracle/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 5014.
    I suspect the NFS share params from the NFS server in the global zone are not 100% correct to the two rac zones/containers.

    Have you visited Oracle Support Services website (formerly metalink) to determine if your desired configuration is supported?
    Last time I looked it was not.
    That said Oracle database installation guides are fully documented online.
    http://www.oracle.com/technetwork/database/enterprise-edition/documentation/database-093888.html

  • Hardware Configuration Problem

    I've installed Windows XP partitioned on my other macs, but I'm having problems on my Mac Pro. Can anyone help with a solution, please? I have a four hard disc set up on my mac pro. The first disc is the one partitioned with my 10.6 boot on the same disc.
    Using Boot Camp with Snow Leopard installed, all goes well after partitioning. It installs Windows Xp from the disc, yet when it restarts, I get a black screen with a message as follows:
    "Windows could not start because of a computer disc hardware configuration problem.
    Could not read from the selected boot disc. Check boot path and disk hardware.
    Please check windows documentation...."
    As I wrote above, as it restarts ready to load xp, it come up with the message above. And of-course, I cannot load the rest of the drivers from the 10.6 install disc.
    Help, please.
    Message was edited by: Philip P Thomas

    I still haven't been able to install but thanks for folks advice.
    Anyone else?
    I have a internal four hard drive set up. The mac OS and Windows Bootcamp is set up on Hard Drive 1, whilst the other three are stiped with data, completely separate from the apps and windows.
    The windows has to be set up on Hard Drive 1, the same disc as my mac boot drive. Using Boot Camp, it is not possible to set up xp/bootcamp on another hard drive other than an internal one.

  • Installing anc configuring Mysql 4.0.x or 4.1.x

    Hi ive got Solaris 10 installed and configured however im having major dramas with the installation of Mysql 4.0.21 which i downloaded from sunfreeware, ive installed using pkgadd and all seems well, but when i try to start the mysql service or mysqld, i get the error :
    ERROR 2002: Can't connect to local MySQL server through socket '/tmp/mysql.sock' (146)
    Please any help would be much appreicated

    Hi,
    Actually MySQL comes with Solaris 10 by default and it is available under /usr/sfw and you can try like this. Otherwise it can be installed by default under /usr/local if it is installed from new download. but the steps will be the same and only install directory needs to be changed.
    And i used 'root' user instead of 'myql'. It can be started by mysql if user 'mysql' is created and given all the permissions as per installation steps given in the documentation.
    # ./mysql_install_db --user=root
    Installing all prepared tables
    050923 22:44:07 /usr/sfw/sbin/mysqld: Shutdown Complete
    To start mysqld at boot time you have to copy support-files/mysql.server
    to the right place for your system
    PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
    This is done with:
    /usr/sfw/bin/mysqladmin -u root password 'new-password'
    /usr/sfw/bin/mysqladmin -u root -h Mullapudi password 'new-password'
    See the manual for more instructions.
    NOTE: If you are upgrading from a MySQL <= 3.22.10 you should run
    the /usr/sfw/bin/mysql_fix_privilege_tables. Otherwise you will not be
    able to use the new GRANT command!
    You can start the MySQL daemon with:
    /usr/sfw/sbin/mysqld_safe &
    You can test the MySQL daemon with the tests in the 'mysql-test' directory:
    cd /usr/sfw/mysql/mysql-test; ./mysql-test-run
    Please report any problems with the /usr/sfw/bin/mysqlbug script!
    The latest information about MySQL is available on the web at
    http://www.mysql.com
    Support MySQL by buying support/licenses at https://order.mysql.com
    Hope this helps!
    ~RK

  • How to install and configure NI Visa Server without having to install MAX?

    Hi,
    I need to install NI Visa Server on a computer so that remote systems can connect to the devices connected to it. However, the flash-drive on the computer is marked as "removable media" by the operating system which is causing the MAX installer to error out (this is a known problem with standard windows installers and removable media).
    Before pursuing a hardware change, I was wondering if there was a way to install and configure NI Visa Server on the embedded computer without having to install or configure through MAX?
    Thanks in advance for any help.

    Hello!
    Your system should appear under remote systems and then you can right click on the software folder and install software. Our 8145s for instance have compact flash drives and this process works. Could you give me more details on your hardware? Are you getting an error message when you try to install the software?
    Allan S.

Maybe you are looking for