RAC: Service started not in the right instance

Hello,
I added today two instances (ACCMEAS3, ACCMEAS4) to a RAC databases (10gR2). The system has now 4 nodes. The new configuration of my service is:
$>-RAC>-ACCMEAS3:$ srvctl config service -d ACCMEAS
ACCMEAS_S PREF: ACCMEAS3 AVAIL: ACCMEAS4
$>-RAC>-ACCMEAS3:$srvctl status service -d ACCMEAS
Service ACCMEAS_S is running on instance(s) ACCMEAS3
This is the actual configuration in the CRS.
Nevertheless the ACCMEAS2 still has the service, despite I have bounced the instance:
(info from a listener):
Service "ACCMEAS_S" has 2 instance(s).
Instance "ACCMEAS2", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
REMOTE SERVER
(ADDRESS=(PROTOCOL=TCP)(HOST=nodea)(PORT=1574))
Instance "ACCMEAS3", status READY, has 2 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
REMOTE SERVER
(ADDRESS=(PROTOCOL=TCP)(HOST=nodeb)(PORT=1574))
"DEDICATED" established:1639 refused:0 state:ready
LOCAL SERVER
The only way to avoid this is to put ACCMEAS2 down.
The service is configured TAF: Basic-Select, CLB_GOAL: LONG,GOAL:NONE
The connection string for info purpose:
datab=(
     DESCRIPTION=
     (ADDRESS= (PROTOCOL=TCP) (HOST=nodea-v) (PORT=1574) )
     (ADDRESS= (PROTOCOL=TCP) (HOST=nodeb-v) (PORT=1574) )
     (ADDRESS= (PROTOCOL=TCP) (HOST=nodec-v) (PORT=1574) )
     (ADDRESS= (PROTOCOL=TCP) (HOST=noded-v) (PORT=1574) )
     (LOAD_BALANCE=off)
     (ENABLE=BROKEN)
     (CONNECT_DATA=
          (SERVER=DEDICATED)
          (SERVICE_NAME=accmeas_s)
          (FAILOVER_MODE=
               (TYPE=SELECT)
               (METHOD=BASIC)
In the future we would like to have all instances as possible spares, that's why this definition in the tnsnames.ora.
What makes the service to get started on a instance not defined for?
Thanks for your help!

The workaround I have found is to use dbms_service.stop_service. This stops the service on the instance 2 and makes everything coherent with the CRS.
Ruben

Similar Messages

  • Shared windows printer - may not be the right section

    Hi all - sorry if I do not have the right section to post this in but I have come to the end of my calm period for trying to get this to work.
    I have a canon iP4200 that is connected to a windows XP box and is setup to be shared. Now I have been asked to get the mac to print directly to the printer through windows with not much luck. At the moment the setup is through a hub with file, printer etc sharing enabled. I have followed some topics on the support site to try and get it to work but with no luck.
    So i guess I have to ask:
    1. Is it even possible to make this work
    2. if it can be done any help would be extremely appreciated as I am pulling my hair out!
    Also my windows firewall is off and I have been able to brouse my windows network from mac and vice versa.
    Thank you so much in advance.

    I recently had this issue myself. What you need to do is toss in your Windows XP Install disc on the XP Box, and go to Add / Remove Programs, then Add Windows Components, and from there do other network services, and do unix print services. After that's installed, you'll be able to print to it just fine.

  • The Fibre Channel Platform Registration Service could not register the platform with fabric

    Hyper-V Cluster. HP StorageWorks 82E 8 Gb PCI-e Dual Port FC HBA.
    Each 15 minutes, eventlog register a warning.
    EventID: 2 Source:2
    The Fibre Channel Platform Registration Service could not register the platform with fabric 10:00:00:05:1e:7f:74:7b.
    I have teste the service. And it's started. Cluster storage validation report without failure.
    Someone suggest any idea.
    Thanks.

    Hi,
    What’s the OS version of your cluster node?
    The Microsoft Fibre Channel Platform Registration Service registers the platform with all available Fibre Channel fabrics and maintains the registrations. A fabric is a network topology where devices are connected to each other
    through one or more high-efficiency data paths. This service is used in support of storage area networks.
    This service is installed by default on Windows Server 2008, and the service startup type is Manual.
    You may try hotfix in KB 978790, and check the result.
    For more information please refer to following MS articles:
    The File Share Witness resource is in a failed state even though the File Share Witness directory is available, and quorum cannot be maintained in a Windows Server 2008 failover cluster
    http://support.microsoft.com/kb/978790
    cluster resources unresponsive
    http://social.technet.microsoft.com/Forums/hu/winserverClustering/thread/886a9cb3-7723-4b64-8c15-602dadf5ced9
    Hope this helps!
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedback
    here.
    Lawrence
    TechNet Community Support

  • I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Tha

    I try to insert some images on a website but the images are not in the right color mode. I do not know what to do? and also I have 1200 images to insert so I can not change one after one. So I need to set up an action, but I donot know how to do it... Thanks

    What is the problem specifiaclly?
    If the images are intended for web use I would recommend converting them to sRGB which could be done with Edit > Convert to Profile or with File > Save for Web, but as including a Save step in Actions and applying them as Batch can sometimes cause problems I would go with regular converting.
    You could also try Image Processor Pro.
    Scripts Page

  • Problem:  While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off.  Video soundtrack is not in the right place.  HELP!

    Problem:  While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off.  Video soundtrack is not in the right place.  HELP!

    Have you checked out the topics at the right in the More Like This section?
    OT

  • HT4539 I have 2 year old I-phone 4 that has never been updated. I need to download an update from my computer but can not find the right place on the I-Tunes page. Do you know where is the right place to update a phone that does not have an "update" butto

    My (old, never updated) I-phone has no "update" button in Settings and I would like to update it. I can not find the right place on I-Tunes to download the updates. Do you know where to look?

    Update your iPhone, iPad, or iPod touch - Support - Apple

  • A small but very irritating bug in Mail: after pressing the spacebar after typing an apostrophe in a word such as "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.

    When composing an email in Mac Mail I've noticed a small but very irritating bug: pressing the spacebar after typing an apostrophe in a word, e.g. "we're", the cursor moves to the left i.e. backwards, and not to the right, effectively deleting a space and not creating one.
    Any ideas?

    I just recreated this problem on my iMac (wired KB, no wireless KB) by changing Mail > Preferences > Composing > Spellcheck from "as I type" to "never". Then type a contraction ending in 're and the space bar causes the cursor to jump back as others have stated, to the spot 'r|e
    Next, I went into System Preferences > Keyboard > Text, and turned off "use smart quotes" and the problem went away again.
    From this point (smart quotes off, spell checking never), if I turn Smart Quotes ON, the problem returns.
    The problem is dependent on the state of both settings.
    The spacebar in Mail "works" if I have either of the following setting combinations:
    Keyboard: smart quotes OFF, Mail: check spelling ANY SETTING
    Keyboard: smart quotes ON, Mail: check spelling AS I TYPE
    Other combinations FAIL
    Keyboard: smart quotes ON, Mail: Check spelling NEVER
    Keyboard: smart quotes ON, Mail: Check Spelling WHEN I CLICK SEND
    Looks to me like there's a bug in Mail > Preferences > Check spelling > NEVER and WHEN I CLICK SEND that interacts badly with Keyboard > Smart quotes ON.
    Thanks.
    Todd Smithgall

  • Why are my videos not playing the right way up

    Why are my videos not playing the right way up

    I took four video clips while on a trip this week.  Two are oriented the right way (playing wide on the device and imported correctly).  The other two are Tall and not oriented right.  Orientation is 90 degrees to the right.  I don't know why this is happening on occasions.  Even some pictures I took did the same **** thing.  It's weird.  And I can't figure it out.  The camera is held the way I want the pictures and videos to be recorded and played but something internal is turning these videos and pictures 90 degrees clockwise.

  • Why are my photos below and not to the right?

    I have a layout problem and it's driving me nuts. The code I have for a page is a hodgepodge of sorts and I cannot, for the life of me, figure out how to get two pictures to be on the right hand side.
    This is what I want it to look like:
    But all I can get it to look like is this:
    The lightbox photos are below the form. Not to the right of the form as I want them to be. I'd be very grateful of any advice the community can offer. I'm tech savvy; I'm a genius the apple store. But I haven't worked in Dreamweaver before and this is, apparently, pushing the limits of what I can do. The site is from a template so there is a great deal of superfluous code.
    Thanks in advance.
    James.

    Correct these problems first http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fweb.me.com%2Fjames.veitch%2FGMedi a%2FContact.html then come back here if your problem still exists.
    Gramps

  • HT5699 i can't buy  a song because it ask me for security questions and i answer and it says you did not  provide the right answer

    i can't buy  a song because it ask me for security questions and i answer and it says you did not  provide the right answer

    Go back to the article you asked this question from and pick a method of contacting Apple. Posting in these boards isn't one of them.
    (103148)

  • IMAQ Quantify rseults with use of image mask are not of the right regeons

    I'm using the IMAQ quantify VI from labview to analize a binairy image. This binairy image is an 8bit image that consists only of pixels with the value 0 or 1. The places of the binairy  image where the pixels have the value 0, mean that a corresponding image has not data in that place. A pixel value of 1 means that there is data that should be processed later in the program in the corresponding image.
    The quantify function is also used to devide the image in 666 regeons with the use of the image mask input. These regeons are squares of 22x22 pixels. The image mask consists of 666 regeons (horizontally 74 sqaures, vertically 9 sqaures) and each of the regeons has his own regeonal number. The resulting regeonal report is used to decide whether each regeon has data in it or not, with the use of the mean value in the report. When the mean value is equal to 0 than it is sure that there is no data in that regeon since all the pixels in the regeon have to have the value of 0. If the mean is not 0 at least one of the pixels in that regeon has the value of 1, wich means that there is data in the regeon. The image mask is created from an 2D array wich is converted to an 16 bit image with the use of IMAQ ArrayToImage.
    I've checked that the input data is correct: the binairy image consist of only 1 and 0 values, the image mask is consist of 666 sqaures of 22x22 pixels and each sqaure has pixels in it with the value corresponding to the regeonal number of the sqaure, the binairy image and the image mask have the same size, the image mask is an 16 bit image and both images have the same border size (3).
    Two problems occur:
    1) The regeonal report doesn't consist of 666 elements, but of 665 elements (element 0 to 664)
    2) The data in the regeonal report is not of the right area's. It looks like the data is shifted one to the right in the regeonal report array, the data in element 0 isn't from regeon 0 but from regeon 1, element 1 corresponds to regeon 2, and so on. I'm haven't checked if the data is exactly of the next regeon, but I suspect it because of the regeonal report array being one short. But it is also possible that the regeons aren't placed on the right place in the binary image.
    If someone else occured this problem with the IMAQ Quantify function or has a solution to it, I would really apreaciate a reply.

    Isn't there anybody who encountered the same problem or with an solution?

  • How to join regions without deleting notes in the right region.

    How to join regions without deleting notes in the right region?
    Every time I try to join two regions, the notes in the right region are cut, even though both regions are on the same track and are touching each other. 
    This is so frustrating. I searched on some other sites and Garageband Help section, but for some bizarre reason, I can't find any explanation of this basic topic.
    Tony

    Tony, the two Regions in your screenshot (green, yellow) are Take Regions (they have a Take number in the reft upper corner), which are Regions that contain multiple Regions and you can select any one to be the active (played) Region. You cannot merge those Regions. You have to delete the unwanted Regions inside first. click on the number, select the Region you want and then click again and select "Delete unused Takes"
    If you don't want to create Take Regions, select the "Cycle Recording" checkbox in the Preferences ➤ General Window
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • Ive forgotton my security questions but Apple do not have the right email to send all the reset information to? what do i do?

    Ive forgotton my security questions but Apple do not have the right email to send all the reset information to? what do i do?

    You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
    (97775)

  • Why does the calender do not show the right time if you want to choose 10, 11, 12 o'clock or any other time with 1x:00?

    Why does the calender do not show the right time if you want to choose 10, 11, 12 o'clock or any other time with 1x:00? It only shows 1:00 and there is no way to change the time to 1x:00.

    Ok well you need to get your facts straight. You say the reason to upgrade to OS 4 but half of these have to do with the new iPhone 4 and not the OS. Two totally different issues

  • I did not find the right place for my question but Is Apple's products are shipped to the Gulf States by a company Aramex ?

    I did not find the right place for my question but Is Apple's products are shipped to the Gulf States by  Aramex ?

    An absolute URL will be a complete URL, it traces from the abosulte root of a file's location on a server...
    http://www.thesite.com/assets/images/Front_Page_Rotating_Banner/banners.xml
    A relative URL is anything short of including the http://domain..., and is read relative to wherever the file using it exists
    assets/images/Front_Page_Rotating_Banner/banners.xml
    In Flash files though, relative links need to be specified relative to the HTML page that embeds the swf.  So if the swf is in a different folder than the html page that embeds it, the swf's targeting must be adjusted as if it were actually in the html file's folder.

Maybe you are looking for

  • File name collision during build that includes Report Generation toolkit. How to correct?

    When I switched to LV 8.6 (it's also in 8.6.1) I started getting a file name collision warning when building an installer that included the Report Generation toolkit. The executable works, but I don't like to leave warnings uninvestigated. I don't un

  • Reading the data from CDATA.

    > Now XSLT ignores all the data in CDATA and i get nothing in output.   This is correct behaviour: http://www.w3.org/TR/2008/REC-xml-20081126/#sec-cdata-sect there is nothing that you can do here.

  • Using URL in Java to send sms ( Intelligent IP Monitoring )

    hi all i have created a IP monitoring where in case of faulty it will send sms based on the error that has been caused in they system, i used this code before but did not responded import java.io.BufferedReader; import java.io.File; import java.io.Fi

  • XLSX Upload - a unified approach - error in LOAD_XML_DATA "=" expected after "2"

    Hello Experts I implemented the How-to XLSX Upload - a unified approach ( written by Benu Mariantony) in our Web dynpro application to load data into our SAP BW Application. According document and page 20: I created the method load_xml_data in the we

  • Is there chatr command for solaris??

    Hi Everybody, In HP-UX, I use chatr command for finding the library dependencies and for changing their flags dynamically. Can you please let me know if there is any such command in solaris 10?? I know ldd command, but it does not allow me to change