Radius Module - JCA

Good Mornig to all,
          i'd like to build a Radius Module under WLS 8.1, and i'm looking for some advises.
          What i wanna build Isn't just a simple application deployed under WLS, if i can, i wanna build something like a Radius Plug-in to install under my WLS. Is it possible?
          i was thinking about a connector build using JCA but i don't know how much bea can let me to access and manage its own resources.
          Any Advise??

It seems to work, i'll test it further on.
However i don't understand because i thought the configuration like below was enough..
aaa group server radius TEST-Radius
server 192.168.140.15 auth-port 1645 acct-port 1646

Similar Messages

Radius Module

Good Mornig to all,
i'd like to build a Radius Module under WLS 8.1, and i'm looking for some advises.
What i wanna build Isn't just a simple application deployed under WLS, if i can, i wanna build something like a Radius Plug-in to install under my WLS. Is it possible?
i was thinking about a connector build using JCA but i don't know how much bea can let me to access and manage its own resources.
Any Advise??

It seems to work, i'll test it further on.
However i don't understand because i thought the configuration like below was enough..
aaa group server radius TEST-Radius
server 192.168.140.15 auth-port 1645 acct-port 1646

Authentication via RADIUS : MSCHAPv2 Error 691

Hello All,
I am working on setting up authentication into an Acme Packet Net-Net 3820 (SBC) via RADIUS. The accounting side of things is working just fine with no issues. The authentication side of things is another matter. I can see from a packet capture that the access-request
messages are in fact getting to the RADIUS server at which point the RADIUS server starts communicating with the domain controllers. I then see the chain of communication going back to the RADIUS and then finally back to the SBC. The problem is the response
I get back is always an access-reject message with a reason code of 16 (Authentication failed due to a user credentials mismatch. Either the user name provided does not match an existing user account or the password was incorrect). This is confirmed by looking
at the security event logs where I can see events 4625 and 6273. See the events below (Note: The names and IPs have been changed to protect the innocent):
Event ID: 6273
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID:
NULL SID
Account Name:
real_username
Account Domain:
real_domain
Fully Qualified Account Name:
real_domain\real_username
Client Machine:
Security ID:
NULL SID
Account Name:
Fully Qualified Account Name:
OS-Version:
Called Station Identifier:
Calling Station Identifier:
NAS:
NAS IPv4 Address:
10.0.0.10
NAS IPv6 Address:
NAS Identifier:
radius1.real_domain
NAS Port-Type:
NAS Port:
101451540
RADIUS Client:
Client Friendly Name:
sbc1mgmt
Client IP Address:
10.0.0.10
Authentication Details:
Connection Request Policy Name:
SBC Authentication
Network Policy Name:
Authentication Provider:
Windows
Authentication Server:
RADIUS1.real_domain
Authentication Type:
MS-CHAPv2
EAP Type:
Account Session Identifier:
Logging Results:
Accounting information was written to the SQL data store and the local log file.
Reason Code:
16
Reason:
Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.
Event ID: 4625
An account failed to log on.
Subject:
Security ID:
SYSTEM
Account Name:
RADIUS1$
Account Domain:
REAL_DOMAIN
Logon ID:
0x3E7
Logon Type: 3
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
real_username
Account Domain:
REAL_DOMAIN
Failure Information:
Failure Reason:
Unknown user name or bad password.
Status:
0xC000006D
Sub Status:
0xC000006A
Process Information:
Caller Process ID:
0x2cc
Caller Process Name:
C:\Windows\System32\svchost.exe
Network Information:
Workstation Name:
Source Network Address:
Source Port:
Detailed Authentication Information:
Logon Process:
IAS
Authentication Package:
MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
Transited Services:
Package Name (NTLM only):
Key Length:
0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
So at first glance it would seem that the issue is merely a case of an invalid username or mismatched password. This is further confirmed in the packet capture where I can see the MSCHAPv2 response has an error code of 691 (Access denied because username or
password, or both, are not valid on the domain). The thing is I know I am using a valid username and I have tried many usernames including new ones I created just for troubleshooting. I don't know how many times I have reset the password in an attempt to ensure
it is not a mismatch password. I have even made sure to use passwords that are fairly short and contain only letters to ensure there was no terminal encoding issues (we connect to the SBC via SSH clients). I have also done this same thing with the shared secret
used during communication between the SBC and the RADIUS server. I have tried prefixing the username with the domain name at login (though I don't think that should be necessary). I have also tried using the full UPN of the user to login. I have tried several
RADIUS testing clients (NTRadPing, RadiusTest, etc.), but they either don't support MSCHAPv2 or only support EAP-MSCHAPv2. I have even created my own client using PHP's PECL RADIUS module. Still it always seems to fail with the MSCHAPv2 authentication with
an error code of 691. Does anyone have any ideas as to why I always get an invalid username or bad password response when I have done everything possible to ensure that is not the case?
Here are the specs for our RADIUS configuration:
Windows Server 2012 R2
SQL Server 2012 Back End Database for accounting.
The server has been authorized on the domain and is a member of the "RAS and IAS Servers" group. For which that group does have access to the accounts we are testing with.
The accounts we are testing with do have the "Control access through NPS Network Policy" option checked under their "Dial-in" property tab.
RADIUS clients configured to simply match on the IP address which you can see from the events above that it is applying the client friendly name.
Connection Request Policy: The "SBC Authenication" policy is being applied as seen above. The only condition is a regex expression that does successfully match the friendly name.
Network Policy: As seen in events above, none are getting applied. For troubleshooting purposes I have created a Network Policy that is set to "1" for the processing order and its only condition is a Day and Time Restriction currently set to any
time, any day.
The authentication method is set to only MSCHAPv2 or MSCHAPv2 (User can change password after it has expired). I have tried adding this to just the Network Policy and I have also tried adding this to the Connection Request Policy and setting it to override
the authentication method of the Network Policy.
We do have other RADIUS servers in our domain that use PEAP to authenticate wireless clients and they all work fine. However, we need this to work with MSCHAPv2 only (No EAP).
All other configurations are set to the defaults.
The only other things of note to consider is the fact that in the events above you can see that the Security ID is "NULL SID". Now I know this is common especially among failed logons but given that this issue is stating an invalid username or
bad password, perhaps it matters in this case. Also, this server has been rebuilt using the same computer account in Active Directory. I do not know if it would have worked before the rebuild. Essentially we built this server and only got as far as authorizing
the server to the domain and adding SQL when we decided to separate out the SQL role onto another server. Rather than uninstalling SQL we just rebuilt the machine. However, before reinstalling Windows I did do a reset on the computer account. I don't think
this should matter but thought I would point it out if there is some weird quirk where reusing the same SID of a previously authorized NPS server would cause an issue.
All in all it is a fairly basic setup and hopefully I have provided enough information for someone to get an idea of what might be going on. I hope this was the right forum to post this too, I figured there would be a higher number of RADIUS experts here than
any of the other categories. Apologies if my understanding of this seems a bit basic, after all, when it comes to RADIUS servers I guess you could say I'm the new guy here.

Update 1:
In an attempt to further troubleshoot this issue I have tried bringing up additional servers for testing. Here are the additional tests I have performed.
Multiple Domains
I have now tried this in 3 different isolated domains. Both our test and production domains as well as my private home domain which has very little in the way of customizations aside from the modifications made for Exchange and ConfigMgr. All have the same
results described above.
VPN Service
Using Windows Server 2012 R2 we brought up a separate server to run a standard VPN setup. The intent was to see if we could use RADIUS authentication with the VPN and if that worked we would know the issue is with the SBCs. However, before we could even
configure it to use RADIUS we just attempted to make sure it worked with standard Windows Authentication on the local VPN server. Interestingly, it too fails with the same events getting logged as the RADIUS servers. The client machine being a Windows 8.1
workstation. Again I point out that we have working RADIUS servers used specifically for our wireless environment. The only difference between those RADIUS servers and the ones I am having problems with is that the working wireless servers are using PEAP instead
of MSCHAPv2.
FreeRADIUS
Now I'm no Linux guru but I believe I have it up and running. I am able to use ntlm_auth to authenticate users when logged on to the console. However, when the radiusd service tries to use ntlm_auth to do essentially the same thing it fails and returns the
same message I've been getting with the Windows server (E=691). I have the radiusd service running in debug mode so I can see more of what is going on. I can post the debug info I am getting if requested. The lines I am seeing of particular interest however
are as follows:
(1) ERROR: mschap : Program returned code (1) and output 'Logon failure (0xc000006d)'
(1) mschap : External script failed.
(1) ERROR: mschap : External script says: Logon Failure (0xc000006d)
(1) ERROR: mschap : MS-CHAP2-Response is incorrect
The thing to note here is that while we are essentially still getting a "wrong password" message, the actual status code (0xc000006d) is slightly different than what I was getting on the Windows Servers which was (0xc000006a). From this document
you can see what these codes mean:
NTSTATUS values . The good thing about this FreeRADIUS server is that I can see all of the challenge responses when it is in debug mode. So if I can wrap my head around how a MSCHAPv2 response is computed I can compare it to see if this is simply a miscomputed
challenge response. Update: Was just noticing that the 6a code is just the sub-status code for the 6d code. So nothing different from the Windows Servers, I still wonder if there is a computation error with the challenge responses though.
Currently, I am working on bringing up a Windows Server 2008 R2 instance of a RADIUS server to see if that helps at all. However, I would be surprised if something with the service broke between W2K8 R2 and W2K12 R2 without anyone noticing until now. If this
doesn't work I may have to open a case with Microsoft. Update: Same results with W2K8 R2.

Radius authentication for the browser-based webtop

Hiya all,
With help of the radius-authentication module for apache (http://www.freeradius.org/mod_auth_radius/) and web-authentication it is possible to use radius-authentication for the classic-webtop. Has anyone got Radius authentication working for the browser-basedwebtop?
SSGD version:
Sun Secure Global Desktop Software for Intel Solaris 10+ (4.30.915)
Architecture code: i3so0510
This host: SunOS sgd1.<removed> 5.10 Generic_118855-36 i86pc i386 i86pc
I have the radius-module running for authentication of a single directory with the apache-config-lines:
SetEnvIf Request_URI "\.(cab|jar|gif|der)$" sgd_noauth_ok
<LocationMatch "/secure">
Order Allow,Deny
Allow from env=sgd_noauth_ok
AuthName "Radius authentication for SGD"
Authtype Basic
AuthRadiusAuthoritative on
AuthRadiusCookieValid 540
AuthRadiusActive On
Require valid-user
Satisfy any
</LocationMatch>
When changing the line <LocationMatch "/secure"> to <LocationMatch "/sgd"> the browser asks for a authentication and then a 'Not Found' page is being displayed.
When using the config-lines from http://docs.sun.com/source/819-6255/webauth_config_browser.html the login-page is being displayed normally and SSGD works.
The main difference I can find between the location /secure and /sgd is: /secure is a simple directory and /sgd is a JkMount to Tomcat.
Changing the JkLogLevel to debug gives the following info in the JkLogFile:
Radius authentication:
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (449): Attempting to map URI '/sgd' from 5 maps
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/examples/*'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/axis/*'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/sgd/*'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/axis'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/sgd'
[Wed Jun 06 09:31:20 2007] [22647:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (486): Found an exact match tta -> /sgd
With the password-authentication file:
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (449): Attempting to map URI '/sgd/' from 5 maps
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/examples/*'
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/axis/*'
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (461): Attempting to map context URI '/sgd/*'
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] map_uri_to_worker::jk_uri_worker_map.c (475): Found a wildchar match tta -> /sgd/*
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_get_worker_for_name::jk_worker.c (111): found a worker tta
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_maintain::jk_worker.c (301): Maintaining worker axis
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_maintain::jk_worker.c (301): Maintaining worker tta
[Tue Jun 05 13:55:29 2007] [12123:0000] [debug] wc_maintain::jk_worker.c (301): Maintaining worker examples
It seems that the JkMount is not being evaluated correctly after using the radius-authentication.
Any help will be usefull since I am allready stuck on this problem for a couple of days :(
Thanks,
Remold | Everett

I got response from the Fat Bloke on the mailing list.
Adding the following line in the apache httpd.conf seams to help and resolved my problem:
Alias /sgd "/opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/webapps/sgd"
Thanks The Fat Bloke !!
- Remold
These instructions are for a 4.2 SGD installation using SGD's third
party web authentication with mod_auth_radius.so (www.freeradius.org).
With 4.2 Sun didn't distribute enough of the Apache configured tree
to enable the use of axps to build the mod_auth_radius module, 4.3 is
better - Sun now install a modified axps and include files, I haven't
tried this with 4.3 yet though.
I built the mod_auth_radius module for Apache 1.3.33 (shipped with 4.2)
So, this is how we got this working with Radius (tested with SBR
server and freeradius.org server.)
Install SGD in the usual way.
Enable 3rd party authentication:
According to:
http://docs.sun.com/source/819-4309-10/en-us/base/standard/
webauth_config_browser.html
Configure the Tomcat component of the Secure Global Desktop Web
Server to
trust the web server authentication. On each array member, edit the
/opt/tarantella/webserver/tomcat/version/conf/server.xml file. Add the
following attribute to the connector element (<Connector>) for the
Coyote/JK2 AJP 1.3 Connector:
tomcatAuthentication="false"
# cat /opt/tarantella/webserver/tomcat/5.0.28_axis1.2final_jk1.2.8/
conf/server.xml

<Connector port="8009" minProcessors="5" maxProcessors="75"
tomcatAuthentication="false"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="0"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>
"By default, for security reasons, Secure Global Desktop
Administrators can't
log in to the browser-based webtop with web server authentication.
The standard
login page always displays for these users even if they have been
authenticated
by the web server. To change this behavior, run the following command:"
# tarantella config edit --tarantella-config-login-thirdparty-
allowadmins 1
Without this, after authenticating via webauth, the user will be
prompted for a
second username and password combination.
# /opt/tarantella/bin/tarantella objectmanager &
# /opt/tarantella/bin/tarantella arraymanager &
In Array Manager:
Select "Secure Global Desktop Login" on left side and click
"Properites" at bottom
Under "Secure Global Desktop Login Properties"
cd /opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/conf
edit httpd.conf:
### For SGD Apache based authentication
Include conf/httpd4radius.conf
at the end of httpd.conf add:
Alias /sgd "/opt/tarantella/webserver/tomcat/
5.0.28_axis1.2final_jk1.2.8/webapps/sgd"
# cat httpd4radius.conf
LoadModule radius_auth_module libexec/mod_auth_radius.so
AddModule mod_auth_radius.c
# Add to the BOTTOM of httpd.conf
# If we're using mod_auth_radius, then add it's specific
# configuration options.
<IfModule mod_auth_radius.c>
# AddRadiusAuth server[:port] <shared-secret> [ timeout [ : retries ]]
# Use localhost, the old RADIUS port, secret 'testing123',
# time out after 5 seconds, and retry 3 times.
AddRadiusAuth radiusserver:1812 testing123 5:3
# AuthRadiusBindAddress <hostname/ip-address>
# Bind client (local) socket to this local IP address.
# The server will then see RADIUS client requests will come from
# the given IP address.
# By default, the module does not bind to any particular address,
# and the operating system chooses the address to use.
# AddRadiusCookieValid <minutes-for-which-cookie-is-valid>
# the special value of 0 (zero) means the cookie is valid forever.
AddRadiusCookieValid 5
</IfModule>
<LocationMatch /radius >
Order Allow,Deny
AuthType Basic
AuthName "RADIUS Authentication"
AuthAuthoritative off
AuthRadiusAuthoritative on
AuthRadiusCookieValid 5
AuthRadiusActive On
Require valid-user
Satisfy any
</LocationMatch>
SetEnvIf Request_URI "\.(cab|jar|gif|der)$" sgd_noauth_ok
<LocationMatch /sgd >
Order Allow,Deny
Allow from env=sgd_noauth_ok
AuthType Basic
AuthName "RADIUS Authentication"
AuthAuthoritative off
AuthRadiusAuthoritative on
AuthRadiusCookieValid 5
AuthRadiusActive On
Require valid-user
Satisfy any
</LocationMatch>
Put appropriate mod_auth_radius.so into
/opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/libexec
# mkdir /opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/htdocs/radius/
# cat /opt/tarantella/webserver/apache/
1.3.33_mod_ssl-2.8.22_openssl-0.9.7e_jk1.2.8/htdocs/htpasswd/index.html
<HTML>
<HEAD>
<TITLE> Test Page for RADIUS authentication </TITLE>
</HEAD>
<BODY>
<B> You have reached the test page for RADIUS authentication.
</BODY>
</HTML>
I hope this helps!
-FB

Service Bus(OSB) not harvesting Endpoint to Enterprise Repository(OER)

Hi,
I am harvesting a WSDL-based HTTP Proxy Service from Oracle Service Bus (OSB) to Oracle Enterprise Repository (OER) but the Endpoint is not harvested. The other artifacts are harvested successfully.
Can someone please help
Thanks,
Umar

Hi Anuj,
Here is the info you requested:
*1. Exactly which version of OSB and OER are you using?*
OSB version: Oracle Service Bus 11.1 Sun Dec 18 03:49:34 PST 2011 1447174
OER version: Oracle® Enterprise Repository 11.1.1.6.0 (v11.1.1.6.0-111103_0001-1437995)
*2. What type of proxy services are you publishing?*
Proxy Type: Web Service - SOAP 1.1 (WSDL:OSB_PR_POC/OpenAccount, port="OpenAccountServicePort")
My proxy service routes to business service.
*3. If it is a WSDL based proxy then are you able to see enpoint URL in exported WSDL from proxy?*
OSB shows the Endpoint information(Endpoint URI /OSB_PR_POC/PS_OpenAccount)
I don't exactly understand what you mean by 'exported WSDL'
*4. Did you harvested the configuration from OSB machine itself?*
The OSB and OER are on the same machine. Used the OSB command line harvester to harvest the project. So, Yes, harvested the configuration from OSB machine.
*5. Can you provide the harvesting log?*
Please find below the logs:
E:\Oracle\Middleware\Oracle_OSB1\harvester>"C:\PROGRA~1\Java\JDK17~1.0_0\bin\java" -Dweblogic.home="E:\Oracle\MIDDLE~1\WLSERV~1.3" -Dosb.home="E:\
Oracle\MIDDLE~1\ORACLE~2" com.oracle.oer.sync.framework.Introspector -harvester_home "E:\Oracle\MIDDLE~1\ORACLE~2\harvester"
log4j:WARN No appenders could be found for logger (org.apache.axis.i18n.ProjectResourceBundle).
log4j:WARN Please initialize the log4j system properly.
+0 [main] INFO com.oracle.oer.sync.framework.MetadataManager - Oracle Enterprise_Repository_Harvester version: v11.1.1.6.0-111020_0001-1434818+
+250 [main] INFO com.bea.alsb.harvester.container.OSBInstance - OSB Harvester created a temporary directory (C:\Users\c74945\AppData\Local\Temp\3\OS+
B11gConfig) for the configuration framework data. This directory will not be automatically deleted.
+<Aug 29, 2012 12:03:21 PM AST> <Info> <OSB Offline> <BEA-000000> <Initialing ALSB in offline mode. Install dir: E:\Oracle\MIDDLE~1\ORACLE~2 config dir+
+: C:\Users\c74945\AppData\Local\Temp\3\OSB11gConfig>+
+<Aug 29, 2012 12:03:23 PM AST> <Alert> <OSB Security> <BEA-387042> <There is no user password credential mapper provider configured in your security r+
ealm. Oracle Service Bus service account management will be disabled. Configure a user password credential mapper provider if you need OSB service acc
ount support.>
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Resource SDK".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Resource SDK" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Custom Resource SDK".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Custom Resource SDK" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "XSLT Resource".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "XSLT Resource" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "XML Schema Resource".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "XML Schema Resource" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "MFL Resource".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "MFL Resource" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "WS-Policy Resource".>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "WS-Policy Resource" initialized.>+
+<Aug 29, 2012 12:03:25 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "WSDL Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "WSDL Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "XQuery Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "XQuery Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "JCA Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "JCA Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "XML Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "XML Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Archive Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Archive Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "JNDI Provider Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "JNDI Provider Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "SMTP Server Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "SMTP Server Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Proxy Server Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Proxy Server Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "Global Settings Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "Global Settings Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "UDDI Registry Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "UDDI Registry Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397037> <Initializing Proxy Service Repository>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397038> <Proxy Service Repository Intialized>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397039> <Initializing Business Service Repository>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397040> <Business Service Repository Intialized>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397001> <Initializing type definitions for module "FLOW Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397002> <Type definitions for module "FLOW Resource" initialized.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Resource SDK".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Resource SDK" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Custom Resource SDK".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Custom Resource SDK" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "XSLT Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "XSLT Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "XML Schema Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "XML Schema Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "MFL Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "MFL Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "WS-Policy Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "WS-Policy Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "WSDL Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "WSDL Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "XQuery Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "XQuery Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "JCA Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "JCA Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "XML Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "XML Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Archive Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Archive Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "JNDI Provider Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "JNDI Provider Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "SMTP Server Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "SMTP Server Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Proxy Server Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Proxy Server Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "Global Settings Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "Global Settings Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "UDDI Registry Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "UDDI Registry Resource" started.>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <Monitoring> <BEA-000000> <New Metadata version is 0>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397003> <Starting services for module "FLOW Resource".>+
+<Aug 29, 2012 12:03:26 PM AST> <Info> <ALSB Kernel> <BEA-397004> <Services for module "FLOW Resource" started.>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390020> <Config Service is initializing for the first time>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Project System>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Project _static>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Project default>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/JNDI Providers>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/Operator Settings>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/Proxy Servers>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/SMTP Servers>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390021> <Creating out-of-the-box location: Folder System/UDDI>+
+<Aug 29, 2012 12:03:28 PM AST> <Info> <ConfigFwk> <BEA-390022> <Creating out-of-the-box resource: Operations System/Operator Settings/GlobalOperationa+
lSettings>
+8393 [main] INFO com.bea.alsb.harvester.plugin.reader.OSBReader - OSB Config Jar Import / Validation starting.+
+10452 [main] INFO com.bea.alsb.harvester.plugin.reader.OSBReader - OSB Config Jar Import / Validation complete.+
+61402 [main] INFO com.oracle.oer.sync.framework.MetadataManager - Successfully completed the harvest+
Starting OERWriter Shutdown and Clean up...
Let me know if you need anymore info.
Thanks.

Mod_auth_radius on v9 system

I'm trying to use the freeradius radius module linked to apache2.x on a Solaris 9 system.
When I run
bin/apxs -i -a -c mod_auth_radius-2.0.c
mod_auth_radius-2.0.a and mod_auth_radius-2.0.1a are generated in the modules directory but not the .so file.
The error...
Warning! dlname not found in xxx/mod_auth_radius-2.0.1a.
Assuming installing to .so rather than a libtool archive.
chmod 755 xxx/mod_aut_radius-2.0.so
chmod: Warning: can't access xxx/mod_aut_radius-2.0.so
apxs:Error: Command failed with rc-65536
Probably something simple I'm overlooking. What should I check out?

Hi Joerg,
APEX 4.1 already contains a built-in authentication scheme for HTTP header variables and I see that you are already using that in your step 8.1. There should be no need to write a custom authentication and sentry function.
It's just a matter of configuring the correct HTTP header variable (e.g. REMOTE_USER) in the application's authentication. The header based authentication probably works best if you just protect apex_authentication.callback itself, instead of redirecting via sso-callback.php. Then, PL/SQL can pick up the HTTP header itself. Here's an (untested) example:
<Location "/apex/apex_authentication.callback">
    AuthName "A Protected Place"
    AuthType SSPI
    SSPIAuth On
    SSPIAuthoritative On
    SSPIOfferBasic On
    # SSPIBasicPreferred
    # SSPIUsernameCase lower
    require valid-user
</Location>Alternatively, you can define another public PL/SQL entry point (e.g. joerg_authentication_pkg.protected_sspi_resource), protect that and call apex_authentication.callback.
The error in your step 8.3 occurs, because apex_authentication.callback also requires the p_app_id parameter. I suspect that you lose that somewhere in the php code.
About the authorization scheme: We are currently working on tighter integration with Oracle Access Manager. It's Apache module can directly pass ldap parameters of the authenticated user to APEX and we use that to get a comma separated list of roles in another HTTP header. Maybe there's a similar functionality in mod_auth_sspi?
Regards,
Christian

MAC-Based VLAN Assignment

Hi everyone,
We have switches configured with 5 VLANs, and would like these switches to
authenticate to a RADIUS server with a client's MAC address. Based on the
client's MAC address, need the RADIUS server to tell the switches which VLAN
to use for the client's port.
No problems with configuring the switch - it's the RADIUS side we're having
trouble with. We have BorderManager 3.8 running on NetWare 6.5 with the
RADIUS modules installed - is there a way to configure the RADIUS server
with a MAC Address to VLAN assignment table? Have tried to add a DAS object
through ConsoleOne, but are unsure how to configure it further.
Any assistance would be greatly appreciated.
Thanks,
Julian

I'm not sure, but I don't think that is within the capability of the
RADIUS components. Also, what's to stop someone from faking another
mac address? That's usually quite easy to do.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to http://www.craigjconsulting.com ***

ACE Module Radius with ACS 4.2

Hi,
I am able to authenticate to my ACE modules via Radius, but when I login it does not give my Admin rights. Does anyone have a fix for this? My ACS admin has been working with TAC since last week to no avail.
John...

You have to use a custom AV pair on TACACS server under user setup to make it work. ACE uses RBAC (role based Access Control) and for that you have to pass the context and User Role from Tacacs server to ACE to make it work.If there is no RBAC info is pushed from Tacacs server and user just get authenticated then the default role assigned by ACE is Network-Monitor.
Following steps (On tacacs server) will make it work
1. Select your user
2. goto tacas+ settings
3. Select " shell (exec)" checkbox
4. Select "custom attributes" checkbox
5. Type your context and role information in custom attrib box, using following format
shell:*
for e.g (if context name is Admin, domain is default-domain and you want to assign role "Admin" to this user )
shell:Admin*Admin default-domain
Hope it helps
Syed

Has anyone every try using the iplanet portal server radius authentication module with cryptoCard?

We are using the easyRadius server from CryptoCARD. When we run the radius server in debug mode, it appears ips is sending multiple access-request message. Also, the server is coming back with a challenge which we are not expecting.

yes,
we did basic integration where the authentication will be done using siteminder. The trick is to protect the portal server web server and not the gateway. You also need to add a new authentication module for siteminder in the portal using ipsadmin. We are protecting the login html page only. We couldn't protect the desktop because it's built using servlets.

Radius or TACAS support on IPS modules ??

HI..
I want to integrate Authentication Server & IPS Sensor & VMS
Authentication Server is Radius or TACAS.
so. Radius or TACAS support on IPS modules ??
thanks,

CiscoWorks Login Module to TACACS+ or Radius
http://www.cisco.com/en/US/products/ps6498/products_user_guide_chapter09186a00806167e3.html#wp98970
But, I don't know IPS module support Radius.
Radius or TACAS support on IPS modules ??

Trying to setup a RADIUS connection with challenge response

I need to test a RADIUS authentication and I've read note id 272804.1 and http://download.oracle.com/docs/cd/B19306_01/network.102/b14268/asoradus.htm.
I'm trying to connect from DEVDB machine using sqlplus as client and connect to the local database server 10gr2 which then should act as RADIUS client to finally try to reach another machine with hostname DEVRADIUS.
I'm using freeRadius which delegate authentication and authorization phases to a OTP service. Other middleware services are able to use this kind of RADIUS authentication with no problem: so this radius configuration is perfectly working for other clients.
I've done some tests, but I'm not able to connect to DEVRADIUS from the Oracle database.
Executing ./adapters and ./adapters ./oracle showed me the RADIUS authentication is available.
When I try to connect using my external user I'm receiving the following error:
ORA-12638: Credential retrieval failed
A firewall exists between the database server and clients, but the port 1812 used to connect my database DEVDB to radius server DEVRADIUS has been open (UDP)
My sqlnet.ora
# sqlnet.ora Network Configuration File: /u01/app/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (RADIUS)
SQLNET.RADIUS_PORT= (1812)
SQLNET.RADIUS_AUTHENTICATION_PORT = 1812
SQLNET.RADIUS_SECRET = (/u01/app/oracle/product/10.2.0/db_1/network/security/radius.key)
SQLNET.RADIUS_AUTHENTICATION_TIMEOUT = 10
SQLNET.RADIUS_AUTHENTICATION = DEVRADIUS
SQLNET.RADIUS_CHALLENGE_RESPONSE = (ON)
SQLNET.RADIUS_CHALLENGE_KEYWORD = (CHALLENGE)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)Into /u01/app/oracle/product/10.2.0/db_1/network/security/radius.key there's only the shared secret RADIUS key.
Previously I've created this user:
SQL> create user rad_user identified externally;
SQL> grant connect, resource to rad_user;
SQL> show parameter OS_A
NAME TYPE VALUE
os_authent_prefix string
remote_os_authent boolean FALSE
SQL> show parameter OS_RO
NAME TYPE VALUE
os_roles boolean FALSE
remote_os_roles boolean FALSEThis is the error I receive:
sqlplus /nolog;
SQL> connect /@DEVDB;
ERROR:
ORA-12638: Credential retrieval failedOn RADIUS server started in debug mode, I don't see any attempt to connect.
Any suggestions?

loqs wrote:You built the package (using --asroot with makepkg is not a good idea ) but you did missed Install_the_package
Also see Kernel_Modules so the module is loaded automatically at boot.
Seriously? I spent that many hours searching for my several error messages, trying to solve them, not wanting to ask for help without putting too much of my own effort into it and when I finally decide to ask for help it is when I didn't get a super essential thing like makepkg doesn't install and is merely to create .pkg.tar.xz?? Oh gosh... (;
Well, thank you! I guess I'll take my next change to use Google to find out how to use makepkg without --asroot. Yes, wl is loaded now and it's set as the kernel driver in use!
Unfortunately, after ip link set wlp2s0 up and typing dmesg | grep wl I get:
wl: module license 'Mixed/Proprietary' taints kernel.
wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
systemd-udevd[148]: renamed network interface wlan0 to wlp2s0
wl 0000:02:00.0: no hotplug settings from platform
wl 0000:02:00.0: no hotplug settings from platform
wl 0000:02:00.0: no hotplug settings from platform
wl 0000:02:00.0: no hotplug settings from platform
And therefor: No firmware loaded. Google doesn't give much about this message but hints to PCI or PCI-Express not working as it should. I found this and tried starting with pciehp.pciehp_force=1 and ordered a modprobe acpiphp but nothing changed.

Error while calling Strored procedure in HR Module

Hi,
I have a composite which picks up a file and use that data to call API's in HR module and do some database lookups. I have done development in one instance and done with testing. So, in the same SOA instance, we want to test the composite against a different oracle database instance. So connection factories for oracle apps and database adpater have been created. I wrote the config plan, replaced the JNDi names for both the adapters and deployed the composite to the same SOA instance. I am getting this error at runtime...
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreateUSEmp' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the APPS.XX_BPEL_CREATEUSEMP.HR_EMPLOYEE_API$CREATE_US_EMP API. An error occurred while preparing and executing the APPS.XX_BPEL_CREATEUSEMP.HR_EMPLOYEE_API$CREATE_US_EMP API. Cause: java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'APPS.XX_BPEL_CREATEUSEMP' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored Check to ensure that the API is defined in the database and that the parameters match the signature of the API. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-6550" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Actually, in the next instance, the API is there and also it has the same signature in both the database instances, the user credentials used in creating the datasource has access to the package in the oracle database instance... Can somebody please help me with the solution, what is causing the error here...
Thanks in Advance,
Naresh

it looks like not all objects are created for XX_BPEL_CREATEUSEMP
synonyms and all grants are there ?

Error while calling Strored procedure in HR Module from BPEL

Hi,
I have a composite which picks up a file and use that data to call API's in HR module and do some database lookups. I have done development in one instance and done with testing. So, in the same SOA instance, we want to test the composite against a different oracle database instance. So connection factories for oracle apps and database adpater have been created. I wrote the config plan, replaced the JNDi names for both the adapters and deployed the composite to the same SOA instance. I am getting this error at runtime...
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'CreateUSEmp' failed due to: Stored procedure invocation error. Error while trying to prepare and execute the APPS.XX_BPEL_CREATEUSEMP.HR_EMPLOYEE_API$CREATE_US_EMP API. An error occurred while preparing and executing the APPS.XX_BPEL_CREATEUSEMP.HR_EMPLOYEE_API$CREATE_US_EMP API. Cause: java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'APPS.XX_BPEL_CREATEUSEMP' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored Check to ensure that the API is defined in the database and that the parameters match the signature of the API. This exception is considered not retriable, likely due to a modelling mistake. To classify it as retriable instead add property nonRetriableErrorCodes with value "-6550" to your deployment descriptor (i.e. weblogic-ra.xml). To auto retry a retriable fault set these composite.xml properties for this invoke: jca.retry.interval, jca.retry.count, and jca.retry.backoff. All properties are integers. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Actually, in the next instance, the API is there and also it has the same signature in both the database instances, the user credentials used in creating the datasource has access to the package in the oracle database instance... Can somebody please help me with the solution, what is causing the error here...
Thanks in Advance,
Naresh

Cause: java.sql.SQLException: ORA-06550: line 1, column 7: PLS-00201: identifier 'APPS.XX_BPEL_CREATEUSEMP' must be declared ORA-06550: line 1, column 7: PL/SQL: Statement ignored Check to ensure that the API is defined in the database and that the parameters match the signature of the API.This has nothing to do with the connection pool you have created (as the BPEL process connects to the new database), and most likely it is something to do with the API/Package you are using. Please double check the code of the package (make sure it is valid and it is identical to the one you have in the other instance).
Thanks,
Hussein

OSB Error in deploying a project with jca file adapter

Hi,
I am facing an issue where I am getting an error when deploying a service from Eclipse. I am using OSB/SOA 11.1.1.5 2 node cluster. I have an OSB service where I am writing to a file and am using file adapater. I created a composite with file adapter to write a file then imported .jac, .wsdl and composite into eclipse and generated a business service out of .jca file. When I deploy the project from eclipse I am getting the below error and am not able to deploy the project.
Conflicts found during publish.
Invalid JCA transport endpoint configuration, exception: javax.resource.ResourceException: Cannot locate Java class oracle.tip.adapter.file.outbound.FileInteractionSpec
Cannot locate Java class oracle.tip.adapter.file.outbound.FileInteractionSpec
I have FileAdapter deployed and pointed to OSB manage servers cluster. Here is a snippet of config.xml.
<app-deployment>
    <name>FileAdapter</name>
    <target>SOA_Cluster,OSB_Cluster</target>
    <module-type>rar</module-type>
    <source-path>/app/oracle/fmw/Oracle_SOA1/soa/connectors/FileAdapter.rar</source-path>
    <deployment-order>321</deployment-order>
    <plan-dir xsi:nil="true"></plan-dir>
    <plan-path>/app/oracle/shared/SOA_Cluster/dp/FileAdapterPlan.xml</plan-path>
    <security-dd-model>DDOnly</security-dd-model>
    <staging-mode>nostage</staging-mode>
</app-deployment>
Also inside console -> deployments -> FileAdapter -> Targets and OSB_Cluster is checked also.
Here is the .jca file
<adapter-config name="writeFile" adapter="File Adapter" wsdlLocation="writeFile.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/HAFileAdapter"/>
<endpoint-interaction portType="Write_ptt" operation="Write">
    <interaction-spec className="oracle.tip.adapter.file.outbound.FileInteractionSpec">
      <property name="PhysicalDirectory" value="C:\ORACLE"/>
      <property name="Append" value="false"/>
      <property name="FileNamingConvention" value="a_%SEQ%.doc"/>
      <property name="NumberMessages" value="1"/>
    </interaction-spec>
</endpoint-interaction>
</adapter-config>
Any idea what might be wrong.
Thanks.

I already have the fileAdapter JNDI is already configured in console. The error I am getting is during the deployment
Conflicts found during publish.
Invalid JCA transport endpoint configuration, exception: javax.resource.ResourceException: Cannot locate Java class oracle.tip.adapter.file.outbound.FileInteractionSpec
Cannot locate Java class oracle.tip.adapter.file.outbound.FileInteractionSpec
Thanks

Outbound BPEL Process deployment Issue in SOA (binding.jca-12600)

Hi,
I have Designed an Outbound BPEL Process for Siebel CRM Service Integration using Jdeveloper (11.1.1.3.0). After that I am facing the deployment issue of this application in SOA suite (11.1.1.6.0). Following is the deployment.log status in jdeveloper:-
[10:57:54 AM] ---- Deployment started. ----
[10:57:54 AM] Target platform is (Weblogic 10.3).
[10:57:54 AM] Running dependency analysis...
[10:57:54 AM] Building...
[10:57:58 AM] Deploying profile...
[10:57:58 AM] Wrote Archive Module to C:\JDeveloper\mywork\Siebel_Outbound_BPEL\QueryWithView_Invoke\deploy\sca_QueryWithView_Invoke_rev1.0.jar
[10:57:58 AM] Deploying sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
[10:57:58 AM] Processing sar=/C:/JDeveloper/mywork/Siebel_Outbound_BPEL/QueryWithView_Invoke/deploy/sca_QueryWithView_Invoke_rev1.0.jar
[10:57:58 AM] Adding sar file - C:\JDeveloper\mywork\Siebel_Outbound_BPEL\QueryWithView_Invoke\deploy\sca_QueryWithView_Invoke_rev1.0.jar
[10:57:58 AM] Preparing to send HTTP request for deployment
[10:57:59 AM] Creating HTTP connection to host:10.10.22.81, port:7001
[10:57:59 AM] Sending internal deployment descriptor
[10:57:59 AM] Sending archive - sca_QueryWithView_Invoke_rev1.0.jar
[10:58:00 AM] Received HTTP response from the server, response code=500
[10:58:00 AM] Error deploying archive sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
[10:58:00 AM] HTTP error code returned [500]
[10:58:00 AM] Error message from server:
#;There was an error deploying the composite on AdminServer: Deployment Failed: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
#;Generic error.
#;Cause: Unable to find suitable outbound binding.
#;Please create a Service Request with Oracle Support.
#;: Generic error.
#;Generic error.
#;Cause: Unable to find suitable outbound binding.
#;Please create a Service Request with Oracle Support.
[10:58:00 AM] Check server log for more details.
[10:58:00 AM] Error deploying archive sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
[10:58:00 AM] #### Deployment incomplete. ####
[10:58:00 AM] Error deploying archive file:/C:/JDeveloper/mywork/Siebel_Outbound_BPEL/QueryWithView_Invoke/deploy/sca_QueryWithView_Invoke_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
And the following is the SOA Server Side log file status:-
####<Jun 3, 2013 10:36:05 AM AST> <Info> <Health> <HOSADDAT02> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <4be72ac3bdb5ebae:-a61256d:13f08d94c98:-8000-00000000000000f4> <1370244965280> <BEA-310002> <36% of the total memory in the server is free>
####<Jun 3, 2013 10:36:12 AM AST> <Error> <ServletContext-/soa-infra> <HOSADDAT02> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <4be72ac3bdb5ebae:-a61256d:13f08d94c98:-8000-000000000000182b> <1370244972343> <BEA-000000> <Error during deployment
oracle.fabric.common.FabricException: Deployment Failed: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
     at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:64)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: oracle.fabric.common.FabricDeploymentException: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
{rootCauses=[]}
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:458)
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:82)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:201)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:150)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:63)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:77)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy314.load(Unknown Source)
     at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:59)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: BINDING.JCA-12600
Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
     at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterBindingConfig.addAdapterReference(AdapterBindingConfig.java:206)
     at oracle.integration.platform.blocks.adapter.AdapterReference.setupAdapterReference(AdapterReference.java:506)
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:425)
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:82)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:201)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:150)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:63)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:77)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy314.load(Unknown Source)
     at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:59)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Kindly help me in this regard

Solution:
Workaround the issue immediately by removing the "ns1:" qualification on the operation for the binding.jca entry in the composite.xml and redeploying.
For example:
From:
<binding.jca config="BAPI_COMPANYCODE_GETDETAIL_invoke_3P.jca"
operation="ns1:BAPI_COMPANYCODE_GETDETAIL"/>
To:
<binding.jca config="BAPI_COMPANYCODE_GETDETAIL_invoke_3P.jca"
operation="BAPI_COMPANYCODE_GETDETAIL"/>
Regards,
Shaheer Badar

Radius Module - JCA

Similar Messages

Maybe you are looking for