Raising a Message and staying at the same screen

Hi,
i had searched SDN before posting this thread
I'm working on a Enhancement for CO12.
The issue is that after raising a message i have to stay at the same screen.
I raised the error message like below, but after this message the whole screen is getting plain.
MESSAGE 'Quantite confirmee ' TYPE 'E'
I change my message type as STATUS, this message is display but the transaction doing its work.
MESSAGE 'Quantite confirmee ' TYPE 'S'
Can you please tell me how to get rid of this issue?
Thanks
Always LEarner

Thanks Guys!!
I tested with all options provided by you people. When i write CALL SCREEN 1000 it is going to dump. I think its unable to identify
the screen.
When i tried to raise a error message like below, message is getting triggered but its not stopping here because the message is of type 'S'
MESSAGE 'Quantite confirmee incomplete' TYPE 'S' DISPLAY LIKE 'E'.
When i tried to raise a error message like below, message is getting triggered but its making the whole screen plain
MESSAGE 'Quantite confirmee incomplete' TYPE 'E' DISPLAY LIKE 'S'
If i'm using 'EXIT' after the message statement , its coming out of the include
And, I have read the documentation of CONFPP05.
The documentation says :-
In this customer enhancement it is strictly FORBIDDEN to send error
messages or other messages because otherwise there is the danger that
data will be inconsistent. SAP takes no responsibility for this !!!
So, is there any way to raise an error message and stay on the same screen??
Thanks & REgards
Always Learner!!

Similar Messages

My ipods screen says connect to itunes, so i connect it and nothing happens the same screen stays on, it will not get off that screen. I know my cord works because when i plug it in it says charging. What do i do?

My ipods screen says connect to itunes, so i connect it and nothing happens the same screen stays on, it will not get off that screen. I know my cord works because when i plug it in it says charging. What do i do?

Restore your ipod

HT1349 WHEN I TURN MY IPHONE 3S ON IT ASKS ME TO CONNECT TO ITUNES AND RESTORE. I HAVE DONE THIS 10 TIMES AND STILL GET THE SAME SCREEN. CAN ANYONE PLEASE HELP??

WHEN I TURN MY IPHONE 3S ON IT ASKS ME TO CONNECT TO ITUNES AND RESTORE. I HAVE DONE THIS 10 TIMES AND STILL GET THE SAME SCREEN. CAN ANYONE PLEASE HELP??

Has your phone been jailbroken? If so, you will likely never get it to work again.
You can try placing your phone in DFU mode (search google) and restoring.

How can I combine a lot of text and images on the same screen?

How can I combine a lot of text and images on the same screen? I can get a couple of words on the screen with a graphic but not 10 lines. I need 10 lines on the page with the image.

Priscilla,
I routinely combine 10 lines of 36 pt bible or lecture text to a suitable background using Boris Title 3D.
Many times the text is too long to fit the screen using Boris, so I devide it into 2 or more parts with no transition between sections.
In my case, the text is on the screen as the speaker quotes them.
David

Delete and stay on the same page!!!!

Hi guys,
As elaborated in the following Picture:
http://www.9m.com/upfiles/PlT97853.png
I have a report and a form on the same page. When press delete I want to delete the checked boxes and refresh "DOWNLOAD" region or stay on the same page.
NOTE: "The Action" Of delete button is - Submit page.
I hope my question is clear and look forward to get help.
Thanks In Advance,
Fateh

Hi,
Can you please create a branching statement under after processing, you can refer the same page itself. So after deleting process it will come to same page.
Hope this might help you.
Thanks & Regards
Srikkanth.M

Video and texting on the same screen?

Trying to skype someone who is unable to speak. They can type their message back to me. Can I get the video and the text messaging on the same screen somehow?

Hi
Execume me Moderator for posting for closed thread.
Wanted to correct or update my posting.
You can also use CN48N with fileds Counter, Degree of procssing so that it will let you know the percentage of completion.
Regards,
PSR

Confirmations- (check last entered % and input on the same screen)

wanted to check if there's any transaction where you can check last entered degree of processing for confirmation and enter the current degree of processing/% of completion on the same screen.
tried CN48N but it isn't allowing to enter confirmations..

Hi
Execume me Moderator for posting for closed thread.
Wanted to correct or update my posting.
You can also use CN48N with fileds Counter, Degree of procssing so that it will let you know the percentage of completion.
Regards,
PSR

Split one message to many messages and then put the same webSphere MQ.

Hi All,
In the project, I encountered a problem. I had a message with many sid element. I needed to split the message to many message by sid element. and then put those message in the same webSphere MQ queue in turn. Do any one encountered the question?

/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible - follow this blog to do a multi mapping (1:N)

Just updated and restored ipad but the ipad stays on the same screen??

well i just updated and restored my ipad and on the ipad it says connect to itunes so i did that and it backed up and synced like a billion times but the ipad screen just stays the same saying to connect to itunes with that picture of the usb thingy with an arrow blah blah
did i do something wrong :/?

then chk on the usb link
try to change the port

Batch convert Pages files to Doc and stay in the same folder?

Hi there,
I use iWork '09 on Mountain Lion. I recently switched to Microsoft Word and prefer it over Pages (personal preference). However, I have nearly 1000 files on my computer that are in Pages format. I have extensively searched this issue in the Apple Support Communities and it appears that there are scripts that DO EXIST that batch convert Pages files into Word files. However, it appears that many of these scripts were built for older versions of iWork and therefore I run into various errors. For example, I used the script available at http://pagesfaq.blogspot.com/2008/01/export-folder-to-word-rtf-pdf-txt-or.html and click run but nothing actually happens (the script runs for less than a second, then I can click run again). I was able to use one script successfully (pasted below), but the only reason I can't use it is because it saves ALL my converted documents in one folder on my desktop and I would like a script that can save them in the original file were the Pages document is located.
So, is there an iWork '09 compatible script that can convert my Pages documents to Word documents and save them in the same folder as the original? Oh, and for an added bonus, it'd be cool if the script also deleted my Pages version after it was done with the conversion
--[SCRIPT batch_exportPages2DOC] (* Enregistrer ce script en tant que script ou progiciel. Exécuter ce script ou déposer l'icône d'un dossier sur son icône. Il ouvre tout document Pages du dossier et l' enregistre en fichier DOC dans le dossier "was_Pages_now_DOC". Celui-ci peut être sur le bureau ou dans le dossier "~/Documents". Si le GUIscripting n'est pas activé le script demande votre mot de passe pour l'activer. Le script récupère le dossier d'exportation par défaut dans le fichier de préférences de Pages. Éviter de cliquer durant l'exécution du script sauf évidemment pour sélectionner le dossier source. ************* Save the script as script or application bundle. Run it or drag and drop a folder icon on its icon. It opens every Pages's documents stored in the folder and save it as DOC file in a folder named "was_Pages_now_DOC". This one may be on the desktop or in the "~/Documents" folder. according to the property storeOnDesktop. If GUIscripting is disabled the script ask for your password to enable it. The script extract the default export path from the Pages's preferences file. Don't click when the script is running. Except, of course, to select the source folder. ************* Yvan KOENIG (VALLAURIS, France) 2008/04/20 2009/06/17 adapté pour format .doc 2009/12/13 updated for MacOs 10.6… *) property theApp : "Pages" property theExt : "pages" property nomDuRapport : "report_Pages2DOC.txt" property nom_du_dossier : "was_Pages_now_DOC" property storeOnDesktop : true (* true = dest folder will be on Desktop false = dest folder will be in "~/Documents" *) property msg1 : "" -- globale property msg90 : "" -- globale property msg91 : "" -- globale -- property msg92 : "" -- globale property msg94 : "" -- globale property msg96 : "" -- globale property msg99 : "" -- globale property rapport : "" -- globale property dossierDeStockage : "" -- globale property dossierParDefaut : "" -- globale property localExport : "" -- globale property newExt : "" -- globale property newType : "" -- globale property isOs4 : missing value -- globale property isOs5 : missing value -- globale property theMenu : missing value -- globale property menuExport : missing value -- globale property types : {{"doc", "SLDocumentTypeMSWord", 2}, {"pdf", "SLDocumentTypePDF", 1}, {"txt", "SLDocumentTypePlainText", 4}, {"rtf", "SLDocumentTypeRichText", 3}, {"rtfd", "SLDocumentTypeRichTextBundle"}, 3} --===== (* our settings *) property typeNum : 1 (* 1 = WORD, 2 = PDF, 3 = Txt, 4 = rtf, 5 = rtfd *) property theButton : missing value (* 1 button PDF 2 button Word 3 button RTF 4 button Standard *) --===== on run (* lignes exécutées si on double clique sur l'icône du script application • lines executed if one double click the application script's icon *) tell application "System Events" to set dossier to choose folder (* dans un bloc System Events pour avoir un titre de dialogue "localisé" • in a System Events block to get a localized dialog title. *) my commun({dossier}) -- my commun({"Macintosh HD:Users:yvan_koenig:Desktop:for_see:" as alias}) end run --===== on open (sel) (* sel contient une liste d'alias des éléments qu'on a déposés sur l'icône du script (la sélection) • sel contains a list of aliases of the items dropped on the script's icon (the selection) *) my commun(sel) end open --===== on commun(elems) my nettoie() my prepareMessages() tell application "System Events" if not (UI elements enabled) then set (UI elements enabled) to true (* Active le GUI scripting • Enable GUI scripting *) set titres to title of processes end tell -- to System Events if theApp is not in titres then my activateTheApp() (* Active et ferme la fenêtre du document créé à l'ouverture • Activate and close the doc's window created at opening *) set {newExt, newType, theButton} to item typeNum of types (* item 1 = {"doc", "SLDocumentTypeMSWord",2} item 2 = {"pdf", "SLDocumentTypePDF",1} item 3 = {"txt", "SLDocumentTypePlainText",4} item 4 = {"rtf", "SLDocumentTypeRichText",3} item 5 = {"rtfd", "SLDocumentTypeRichTextBundle",3} *) set sysAtt to (system attribute "sys2") if 4 > sysAtt then if my parleAnglais() then error "This script requires MacOs X 10.4 or higher !" else error "Ce script requiert MacOs X 1.4 ou ultérieur !" end if else if 5 > sysAtt then set isOs4 to true set isOs5 to false if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 9 end if else if 6 > sysAtt then set isOs4 to false set isOs5 to true if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 8 (* was a wrong 9 *) end if else set isOs4 to false set isOs5 to false if my getVersion() < "4" then set theMenu to 3 set menuExport to 13 else set theMenu to 10 set menuExport to 8 (* was a wrong 9 *) end if end if my fermeFenetres() (* • Close existing windows *) my afficheLeMessage(msg1) (* Éviter de cliquer… • Don't click… *) tell application theApp to set localExport to localized string "Export" set dossierParDefaut to my getDefaultExport() as text set rapport to "" set dossierDeStockage to my creeDossierDeStockage(nom_du_dossier) (* Unicode text *) try repeat with elem in elems try my exploreTraite(elem as alias, "") end try end repeat if rapport = "" then set rapport to msg90 -- crée un fichier texte sur le Bureau set p2d to path to desktop set p2r to (p2d as Unicode text) & nomDuRapport tell application "System Events" if exists (file p2r) then delete (file p2r) make new file at end of p2d with properties {name:nomDuRapport} end tell set rapport to rapport as text write rapport to (p2r as alias) on error MsgErr number NroErr if NroErr is not -128 then beep 2 tell application (path to frontmost application as string) to ¬ display dialog "" & NroErr & " : " & MsgErr with icon 0 buttons {msg99} giving up after 20 end if -- NroErr is… return end try my nettoie() if my parleAnglais() then my afficheLeMessage("Export done.") else my afficheLeMessage("Traitement terminé.") end if end commun --===== on nettoie() (* pour ne pas stocker dans le fichier script • So it will not be stored in the script file *) set dossierDeStockage to "" set dossierParDefaut to "" set rapport to "" set localExport to "" set newExt to "" set newType to "" set isOs4 to missing value set isOs5 to missing value set theMenu to missing value set menuExport to missing value set theButton to missing value set msg1 to "" set msg90 to "" set msg91 to "" set msg92 to "" -- set msg94 to "" set msg96 to "" set msg99 to " " end nettoie --===== on afficheLeMessage(m) beep 1 tell application (path to frontmost application as string) activate if my parleAnglais() then display dialog m buttons {" OK "} default button 1 giving up after 10 else display dialog m buttons {" Vu "} default button 1 giving up after 10 end if end tell end afficheLeMessage --===== on creeDossierDeStockage(Nom) (* S'il n'existe pas, construit un dossier destination sur le bureau ou dans "~/Documents" • If does not exist, create a destination folder on the desktop or in "~/Documents" *) local dd, dds if storeOnDesktop is true then set dd to path to desktop as Unicode text else set dd to path to documents folder as Unicode text end if if Nom ends with ":" then set dds to dd & Nom else set dds to dd & Nom & ":" end if (* dossierDeStockage n'existe pas, on le crée • dossierDeStockage is not available, build it *) tell application "System Events" to if not (exists item dds) then make new folder at end of folder dd with properties {name:Nom} return dds as Unicode text end creeDossierDeStockage --===== on exploreTraite(elem, ptree) (* elem est un alias • elem is an alias *) local elem_, cl_, type_Id set elem_ to elem as Unicode text tell application "System Events" to tell disk item elem_ set cl_ to class if cl_ is folder then set type_Id to "" else set type_Id to type identifier end if end tell -- "System Events" set cl_ to cl_ as Unicode text if type_Id is in {"com.apple.iwork.pages.pages", "com.apple.iwork.pages.sffpages"} then (* C'est un fichier Pages. • It's a Pages document *) my TraiteUnDocument(elem_) else if cl_ is in {"file package", "«class cpkg»"} then set rapport to rapport & msg91 & elem_ & return (* "Package", Attention, un package EST un dossier "spécial". • Caution, a package IS a "special" folder. *) else if cl_ is in {"folder", "«class cfol»"} then my ExploreUnDossier(elem_, ptree) else set rapport to rapport & msg92 & elem_ & return (* "Pas un document Pages". • "Not a Pages's document" *) end if -- typeId_ is … end exploreTraite --===== on ExploreUnDossier(dossier, ptree) local nomElement, cheminElement, c repeat with nomElement in list folder dossier without invisibles set cheminElement to dossier & nomElement tell application "System Events" to set c to name of (dossier as alias) my exploreTraite(cheminElement as alias, ptree & c & ":") end repeat end ExploreUnDossier --===== on TraiteUnDocument(leCheminOriginal_UniText) my export2Doc(leCheminOriginal_UniText as alias, leCheminOriginal_UniText) end TraiteUnDocument --===== on export2Doc(p, leCheminOriginal_UniText) (* • here p is the path as alias *) local flag, nom_de_p, nouveauChemin, w, bof, x, p_xport try tell application theApp open p set flag to false repeat 300 times (* Attends que le fichier soit réellement ouvert. • Wait until the file is really open *) if my getNbWindows() > 0 then set flag to true exit repeat end if end repeat end tell -- to theApp if flag is false then error number 8888 (* Le fichier n'a pu être ouvert. • The file can't be open. *) on error MsgErr number NroErr if NroErr = 8888 then set rapport to rapport & msg94 & leCheminOriginal_UniText & return else set rapport to rapport & "### " & MsgErr & " ### " & errNbr & return end if return (* can't do the remaining tasks *) end try tell application "System Events" to tell file leCheminOriginal_UniText set nom_de_p to name end tell -- System Events if nom_de_p ends with theExt then set nom_de_p to text 1 thru -(2 + (length of theExt)) of nom_de_p set nouveauChemin to dossierParDefaut & nom_de_p & "." & newExt --log nouveauChemin tell application "System Events" to if exists (file nouveauChemin) then set name of file nouveauChemin to nom_de_p & my horoDateur(modification date of file nouveauChemin) & "." & newExt (* name stamped *) try set {w, bof} to my getFrontWindow() tell application "System Events" to tell application process theApp click menu item menuExport of menu 1 of menu bar item theMenu of menu bar 1 (* Exporter… *) repeat until exists sheet 1 of window w delay 0.1 end repeat tell sheet 1 of window w (* sheet containing the buttons PDF, Word, RTF, Standard *) -- get properties of UI elements of radio group 1 if isOs4 then click button theButton of radio group 1 else if isOs5 then click checkbox theButton of radio group 1 else click radio button theButton of radio group 1 (* I hope that they will no longer change it *) end if -- isOs4 is true (* if typeNum is 2 then delay 0.2 tell pop up button 1 click click menu item quality of menu 1 end tell delay 0.2 end if *) click button 1 (* Suivant… *) repeat until exists button localExport delay 0.1 end repeat click button localExport (* Exporter… *) end tell -- to sheet… repeat 20 times if exists sheet 1 of window w then click button 2 of sheet 1 of window w (* "Ne pas consulter " dans éventuel rapport d'anomalies • "Don't review" in sheet reporting possible export anomalies *) exit repeat end if delay 0.1 end repeat end tell -- to process … System Events if dossierDeStockage is not dossierParDefaut then (* we must move the file from folder dossierParDefaut to folder dossierDeStockage *) set p_xport to dossierDeStockage & nom_de_p & "." & newExt tell application "System Events" to if exists (file p_xport) then set name of file p_xport to nom_de_p & my horoDateur(modification date of file p_xport) & "." & newExt tell application "Finder" to duplicate file nouveauChemin to folder dossierDeStockage (* • before 10.5, System Events is unable to move *) my wait4File(p_xport) tell application "System Events" to if exists file nouveauChemin then delete file nouveauChemin end if -- dossierDeStockage is not… my ferme1fenetre() on error errMsg number errNbr set rapport to rapport & msg96 & p & return & errMsg & " ### " & errNbr & return end try end export2Doc (* ===== • Build a stamp from the modification date_time *) on horoDateur(dt) local annee, mois, jour, lHeure, lesSecondes, lesMinutes set annee to year of dt set mois to month of dt as number (* existe depuis 10.4 *) set jour to day of dt set lHeure to time of dt set lesSecondes to (lHeure mod 60) set lHeure to round (lHeure div 60) set lesMinutes to (lHeure mod 60) set lHeure to round (lHeure div 60) return "_" & annee & text -2 thru -1 of ("00" & mois) & text -2 thru -1 of ("00" & jour) & "-" & text -2 thru -1 of ("00" & lHeure) & text -2 thru -1 of ("00" & lesMinutes) & text -2 thru -1 of ("00" & lesSecondes) (* • Here, the stamp is "_YYYYMMDD-hhmmss" *) end horoDateur (* ===== • Take care, the front window may be an Inspector or a dialog one. *) on getFrontWindow() local namesOfWindows, w, flag tell application theApp to activate set flag to false tell application "System Events" to tell application process theApp set namesOfWindows to name of every window repeat with w in namesOfWindows if subrole of (get properties of window w) is "AXStandardWindow" then set flag to true exit repeat end if end repeat end tell return {w, flag} (* • w is the name of the front document's window *) end getFrontWindow (* ===== • Wait that the file is completely written on disk *) on wait4File(p) (* • p must be Unicode text *) local oldSize, nnn, newSize set oldSize to 0 tell application "System Events" to set nnn to name of file p repeat try tell application "System Events" to set newSize to physical size of file p if oldSize < newSize then set oldSize to newSize else exit repeat end if end try end repeat end wait4File --===== on activateTheApp() local bof, status tell application theApp to activate if my getStartingStatus() is false then tell application "System Events" to tell application process theApp to keystroke return repeat set {bof, status} to my getFrontWindow() if status is true then exit repeat end repeat end activateTheApp (* ===== • Close existing open windows *) on fermeFenetres() repeat while my getNbWindows() > 0 my ferme1fenetre() end repeat (* • Now there is no open window *) end fermeFenetres --===== on ferme1fenetre() tell application theApp to activate tell application "System Events" to tell application process theApp to keystroke "w" using {command down} end ferme1fenetre --===== on getPlistValue(valName, default) local thePlist, u set thePlist to (path to preferences folder as Unicode text) & "com.apple.iWork." & theApp & ".plist" tell application "System Events" if exists file thePlist then tell contents of property list file thePlist try set u to (value of property list item valName) (* Unicode Text *) on error (* On est là si Pages n'a rien enregistré avec des préférences neuves • Here if Pages never saved with the new preferences file. *) set u to default end try end tell -- to contents of… else (* On est là s'il n'y a pas de fichier de préférences • Here if there is no preferences file. *) set u to default end if end tell -- to system events return u end getPlistValue --===== on getStartingStatus() return my getPlistValue("LSDefaultsUseDefaultStartingPoint", false) end getStartingStatus --===== on getDefaultExport() local u (* son of a *****, I forgot that they don't use the same name !! *) if theApp contains "Pages" then set u to my getPlistValue("SLDocumentDefaultExportDirectory", "~/Documents") else if theApp contains "Numbers" then set u to my getPlistValue("LSDocumentDefaultExportDirectory", "~/Documents") else error "I didn't coded a Keynote version !" end if set u to (POSIX file (do shell script "echo " & u)) as text if u ends with ":" then return u else return (u & ":") end if end getDefaultExport --===== on getNbWindows() tell application "System Events" to tell application process theApp to return count of windows end getNbWindows --===== on getLocale(a, x) tell application a to return localized string x end getLocale --===== on getVersion() try tell application theApp to return version on error return "1" end try end getVersion --===== on parleAnglais() local z try tell application theApp to set z to localized string "Cancel" on error set z to "Cancel" end try return (z is not "Annuler") end parleAnglais --===== on prepareMessages() if my parleAnglais() then set msg1 to "Don’t click when the script is running." & return & "Except, of course, if it ask for." set msg90 to "No problem during the export process." set msg91 to "Package" set msg92 to "Not a " & theApp & "’s document" -- set msg94 to theApp & " can’t read it" set msg96 to "Not copied." set msg99 to "Oops" else set msg1 to "Éviter de cliquer durant l’exécution du script" & return & "sauf s’il le demande." set msg90 to "Exportation réussie sans incident." set msg91 to "Package" set msg92 to "Pas un document " & theApp -- set msg94 to theApp & " n’a pas pu le lire" set msg96 to "Pas copié." set msg99 to " Vu " end if set msg91 to "### " & msg91 & " ### " set msg92 to "### " & msg92 & " ### " -- set msg94 to "### " & msg94 & " ### " set msg96 to "### " & msg96 & " ### " end prepareMessages --===== --[/SCRIPT]

Try this app: http://tyorex.com/iWorkConverter
Batch convert Pages files to doc and pdf.

Tbird starts downloading but stops at one message and keeps downloading the same message each time it does a synch.

I have not changed any account settings and can still access my email online. The problem started randomly yesterday and has continued after logging off and on twice.
My email is accessed from att using a POP server.

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Out-of-Warranty Service
If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below.
iPad model
Out-of-Warranty Service Fee
iPad mini
$219
iPad 3rd, 4th generation
$299
iPad 2, iPad
$249
A $6.95 shipping fee will be added if service is arranged through Apple and requires shipping. All fees are in US dollars and are subject to local tax.
Certain damage is ineligible for out-of-warranty service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. However, an iPad that has failed due to contact with liquid may be eligible for out-of-warranty service. See http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You may can get the iPad repaired at 3rd party repair sources for less $, however, any remaining Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

I have no idea how to have both my playlists and songs on the same screen in the HORRIBLE new interface

How do I have both my playlists down the left side of the screen and the songs in my library on the right.... What a POS...
If Itunes always worked like this, Apple would have never gotten it off the ground...

Grappler1261 wrote:
I updated my iTunes as it asked me to and then restarted my computer but iTunes would not open as it said it was corrupted.
See Install & Update here > http://www.apple.com/support/itunes/install/
Also see Downloading Content in the same link.

I am unable to open any app on my iphone. While i'm trying to open an app, it just shakes the screen and it does not get open and remains in the same page. It worked fine until I charged the phone in my laptop. Please can anyone help me to recover it?

I am not able to open any app on my iphone. While i'm trying to open an app it just shake the screen and it does not open and remains in the same screen. It worked fine until I charged the phone this evening. After that suddenly I'm facing this. Please can anyone help me to recover this issue? pls!

This is covered in the basics section.
A restore loses nothing.
A restore does. If you are using the iphone as designed, then everything should be on your computer.

Parameters and report on the same page

I am new to HTML_DB. I would appreciate your help with the following:
I have html page with items(parameters) and report on the same screen.
Items are:
Customer: Select list with Submit
Invoice No.: Select list - Populated invoices numbers for the selected customer
Department: Select List
Prod Month: Date Picker
Button: Report View.
Users can select any of the above parameter to create a report. The problem is when I don't select any customer and just select the department or prod month and click on a Report View button, I get SQL error in the Invoice Number item.
It seems when the page refreshes to create a report Invoice Number items sql query is executing but when it does not find the customer name, its giving the error.
If I select a customer name, the page gets refreshed and the report is generated. I dont want to create a report when they select a customer. I want them to select the parameters and click on the Report View button to create the report on the same page.
Thank you.
Regards,
Rek

Sounds like you are building the query string and submitting that and the fact that they leave something out messes up that string...<br><br>If that's the case, you can add validations to the page to make sure they enter in all the appropriate information.<br><br>
chet

How do you run to Drives on the same screen. I installed a ssd and a hhd to my mac but i can only view the content of the drive only if i boot of that drive. Im try to have my ssd for fast boots and hhd for my music,movies etc. Please help.

I installed a samsung 840 pro SSD to my primary slot and relocated my 1.5 TB HDD to a data double where my optical drive was. I transfered my apps and Mac OS X to my SSD for fast boots and all my itunes movies, music, Iphoto etc to my HDD. I rebooted off my SSD then seen all the data on my HHD itunes movies, music, iphotos etc i cannot view on my SSD. So my question is how do you view all the content on both the ssd and hdd on the same screen with having to boot off one or the other?

No, what I'm saying is that once you boot into OSX, you should be able to see both drives listed. If you don't then either OSX is hiding the other drive because it sees it as a boot drive and is trying to protect the contents from novice users or there's another problem. If it's the first thing (i.e. it's a protection thing), then your only option would be to boot into the old drive, copy off all your personal data to an external backup drive, then reboot into the SSD and go into Disk Utilities and wipe/reformat the second drive so that you can see it as a regular secondary drive. Then when you see it as that, you can copy your data back to it.
Be carefull poking around in Disk Utility as you can easily lose your data. It's possible the Mac just isn't mounting that second drive because it sees it as another boot drive. Whatever you do, don't accidentally erase it without getting a copy of your data off of it because you obviously don't have that on your SSD now.

Raising a Message and staying at the same screen

Similar Messages

Maybe you are looking for