Raletions tables between SC and PO.

Hi Experts,
I need to know which tables are the relation between SC and PO. Also the table where save the substitute for a user.
Many Thanks.
Regards,
David.

Hi,
Did you check this TCode BBP_PD
You can also try using FMs BBP_PD_PO_GETLIST and BBP_PD_PO_GETDETAIL .
Also please visit this site for more details.
http://www.scribd.com/doc/946498/SAP-CRM-Tech-DRAFTtablesrelationships
Thanks
Zameer

Similar Messages

Link Table between CRM and ERP

Hi Experts,
Does anyone knows the link table between CRM and ERP for Contact Person (Buss Part) CRM and Contact Person ERP.
In my customer system, contacts are automatically duplicated in CRM.
When you make a change in ERP, this change is automatically done in CRM.
So I suppose that there is a table between the both systems to find the corresponding number...
Thank you for your help and hope my English is good enough to understand :o)
Best regards,
Luis.

Hi Micky,
Thanks for your answer.
Unfortunatelly, number are differents...
I move this question to CRM forum ;o)
Kr,
Luis.
This has been solved in this thread:
Link Table between CRM and ERP
Edited by: Luis Loredo Marino on Feb 24, 2010 1:24 PM

Relation table between Opportunity and Activity.

Can any one help me to know,In which table relationships are maintained between Opportunity,Activity,Account etc

Dear frnd,
pls find below for relations..
2.1 Master Data Tables
Table Name     Description
Business Partner
BUT000     BP: General data
Contains Business Partner Number, Partner Category, Partner Type, First Name, Last Name etc.
BUT020     BP: Addresses
BUT050     BP relationships/role definitions: General data
Contains Relationship, Partner Number (PARTNER1), Relationship Category
BUT051     BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK     Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA     Bank Master Data
BUT100     BP: Roles
ADR2     Telephone Numbers (Business Address Services)
ADR6     SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC     Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T     Table containing the Title text against a Title No.
Note:
        Pass the langu key with the
        language in which you want the
        text.
COMM_PRODUCT     Master Table for Product
CRMM_BUAG     Master table for Business Agreement
CRMM_BUAG_H     Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU Contract account table FKKVKP.
CRMM_BABR_H     Rule data for business agreements data in this table correspond to ISU Contract account table FKKVK
Business Transaction(Service Contracts in Particular)
CNCCRMPRCUSZZBUR     Condition Records for Service Contracts. We get Basic Unit Rate, Standing Charge Rate etc.
(This is a Z table used in a leading ISU SAP-CRM implementation. You can give the table SAP0090 this is a standard table. in general all condition tables have the naming convention CNCC*)
CRMD_ORDERADM_H     Contains the Header Information for a Business Transaction.
Note:
1.     It doesnt store the Business Partner
       responsible for the transaction. To
       get the Partner No, link it with
       CRM_ORDER_INDEX.
2.     This table can be used for search
       based on the Object Id(Business
       Transaction No).
CRMD_CUSTOMER_H     Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE     Master table Business Transaction Type
CRMC_PARTNER_FCT     Definition of Partner Functions
SCPRIOT     Priorities for Activities with priority text.
Note:
        Pass the langu key with the
        language in which you want the
        text.
CRMC_PROC_TYPE_T     Text for a transaction type
CRMC_ACT_OBJ_T     Objective Number and Text for Activities
TJ30T     All the status code and text
CRMC_PR_ASSIGN     Transaction Type and its Transaction Type Object.
IBIB     Installed Base/Ibase
IBIN     Installed Base Components
2.2 Transaction Data Tables
Table Name     Description
CRMD_LINK     Transaction GUID set for all the Business Transactions
CRMD_ORDER_INDEX     Contains Header as well as Item details for a Business Transaction.
Note:
1.     It doesnt store the Business
      Transaction No (Object ID).
      To get the Business Transaction No
      link the table with
      CRMD_ORDERADM_H
2.   This table can be used for search
      based on the Partner No
CRMD_ORDERADM_I     Stores the Item information for a Business Transaction. The scenarios where we have a Contract Header and within contract we have Line Items for the contract, this table can be useful.
E.g. Service Contracts
CRMD_CUSTOMER_I     Additional Site Details at the Item Level of a Service Contract
SCAPPTSEG     Table for individual Appointment Types for a transaction.
CRM_JEST     Individual Object Status for any business transaction.
CRM_JCDS     Current Status for a business transaction along with set date, set time and status code.
2.3 Table Enhancements
Following tables were enhanced as per the project requirement in a leading ISU-SAP CRM implementation. Easy Enhancement workbench can be used for enhancing most of the transactions in CRM.
Table Name     Description
BUT000     Fields such as Registration No, SIC Code, Cost to Serve etc. that appear in the additional details tab in BP transaction
CRMM_BUAG_H     Fields such as Acc in Legacy, Invoice Output, Clearing Category, Bill Form, Lock Process Type etc. that appear in the Business Agreement tab in BP transaction
CRMD_CUSTOMER_H     This table is used as an extension of the service contract header i.e. if there is a requirement to add new fields to CRMD_ORDERADM_H then; this table has to be used to add the fields.
CRMD_CUSTOMER_I     This table is used as an extension of the service contract header i.e. if there is a requirement to add new fields to CRMD_ORDERADM_I then; this table has to be used to add the fields. For e.g. fields required for additional site details tab at item level of Service Contract are added to this table.

COMAPRING TABLES BETWEEN ORACLE AND SQL

HI GUYS
I HAVE 2 DIFFRENT SERVERS(ORACLE(ERP),SQL SERVERS)
I WANT TO COMPARE THESE 2 TABLES IN A BEST AND EASY WAY I CAN CREATE PACKAGE CONTAIN SOURCE LOOKUP ETC
BUT I WANTED TO DO IT IN STORED PROC
HOPE IT IS A CHALLENGING QUESTATION
THANKS IN ADVANCE
ADKR

Hi ADKR,
then linked the Oracle server to the SQL Server one and then you can write a stored procedure that for example encapsulates the T-SQL Merge statement (if supported by your SQL Server version).
Arthur
MyBlog
Twitter

Joining table between XLA_AE_HEADERS and RCV_TRANSACTIONS

Hi ,
In the rcv_receiving_sub_ledger with the rcv_transaction_id we can tie in the rcv_transactions
table with the transaction_id, so:
rrsl.rcv_transaction_id = rt.transaction_id
But is this true for Process Manufacturing Organization also ?
If i make a receipt in Process Manufacturing Organization (OPM Enabled) then shall data populate in rcv_receiving_sub_ledger at the time of accounting ...
Regards,
prakhar

Pl see if ML Doc 558514.1 (How To Join XLA_AE_HEADERS and RCV_TRANSACTIONS?) can help
HTH
Srini

Difference in client tables between WLC and AP controller d0

Hello gang,
Anyone know whether its normal to have an APs' d0/d1 controller output show clients that don't appear on the WLC's "sh client <AP>" output?
Here's an example - 10 clients visible from a "sh client " on the controller, but 15 clients visible on AP4s "sh controller d0" debug.
Granted the User Idle Timeout has been bumped up to 7200 seconds, but shouldn't the AP's d0/1 client table get updated if/when a client roams to another AP nonetheless? Wouldn't this otherwise cause confusion? Is the Split-MAC Split-brained?
Thanks for your input,
--Bruce Johnson
(mcores2wlc1) >show client ap 802.11b mell9s1ap4
MAC Address AP Id Status WLAN Id Authenticated
00:40:9d:31:b0:79 130 Associated 6 Yes
00:40:9d:34:1f:04 130 Associated 6 Yes
00:40:9d:33:ee:04 130 Associated 6 Yes
00:40:9d:2b:d1:6a 130 Associated 6 Yes
00:40:9d:31:23:a3 130 Associated 6 Yes
00:40:9d:33:e9:28 130 Associated 6 Yes
00:40:9d:31:27:a5 130 Associated 6 Yes
00:40:9d:33:eb:4b 130 Associated 6 Yes
00:40:9d:31:22:1d 130 Associated 6 Yes
00:40:9d:33:ee:cb 130 Associated 6 Yes
(mcores2wlc1) >debug ap command "sh cont d0" mell9s1ap4
(mcores2wlc1) >Thu Feb 26 18:54:10 2009: mell9s1ap4:
Thu Feb 26 18:54:10 2009: mell9s1ap4: ---Clients AID VLAN Status Age Tx Mode Enc Key Rate
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d33.eaec 198 6 0000 0800000FF 7195/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d30.efd1 197 6 0000 0800000FF 7195/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d31.bc74 195 6 0000 2800001FF 7165/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d31.27a5 193 6 0000 0800000FF 7195/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d33.eecb 192 6 0000 2800000FF 7195/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d31.221d 190 6 0000 0800000FF 7194/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d33.eb4b 186 6 0000 0800000FF 7194/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0016.6faf.9d64 185 3 0000 0C00000FF 7186/7200 0-0 0191 200 0-10 10FC0000 06C
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d33.e928 177 6 0000 2800001FF 5818/7200 0-0 10111 200 0-10 10000000 016
=>Thu Feb 26 18:54:10 2009: mell9s1ap4: 0016.6faf.9db8 176 3 0000 0C00000FF 7140/7200 0-0 0191 200 0-10 10FC0000 06C
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d31.23a3 174 6 0000 2800000FF 7195/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d2b.d16a 165 6 0000 1800000FF 7194/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d33.ee04 163 6 0000 0800000FF 7194/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d34.1f04 151 6 0000 1800000FF 7195/7200 0-0 10111 200 0-10 10000000 016
Thu Feb 26 18:54:10 2009: mell9s1ap4: 0040.9d31.b079 147 6 0000 2800000FF 7194/7200 0-0 10111 200 0-10 10000000 016

hi Leo,
I tested this out, but i guess its not working as i thought it would work. I configured the backup primary controller IP and name in the global configuration of the Wireless tab of the WLC and left the AP high availability blank with no settings. I joined the AP to the WLC and show capwap client ha output on the AP shows the backup primary controller name. but if i shut down the primary controller, the AP does not join the back, it just tries to get WLC ip by renewing DHCP forever and stuck in that...   below are the outputs.. any idea why its like this ? I thot if there is no HA configured at the AP level, the global config on the controller level should take effect ?
LWAP3-1042#sh cap cli ha
fastHeartbeatTmr(sec)   7 (enabled)
primaryDiscoverTmr(sec) 30
primaryBackupWlcIp      0xA0A700A
primaryBackupWlcName    WLC2-4402-50
secondaryBackupWlcIp    0x0
secondaryBackupWlcName
DHCP renew try count    0
Fwd traffic stats get   0
Fast Heartbeat sent     0
Discovery attempt      0
Backup WLC array:
LWAP3-1042#
*Apr 30 20:36:21.324: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
*Apr 30 20:36:31.829: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.10.114.49, mask 255.255.255.0, hostname LWAP3-1042
*Apr 30 20:37:17.832: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
*Apr 30 20:37:28.337: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.10.114.50, mask 255.255.255.0, hostname LWAP3-1042
*Apr 30 20:38:14.338: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
Not in Bound state.
*Apr 30 20:38:24.842: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 10.10.114.51, mask 255.255.255.0, hostname LWAP3-1042
regards
Joe

Comm table between 351 and 101for reporting

Hello
Which is the comm table form which I can get the data for 351 and 101 for the same STO
Niti Narayan

hi,
> check tables: S031(Movement of current stocks) and MSEG(Document segment : Material)...
Hope it helps..
Regards
Priyanka.P

Tables between OBAW and Oracle Data Warehouse in OBIA rpd are different

Hi,
The tables in the Data Warehouse DB is different as compared to the tables in the physical layer of the Oracle data Warehouse in OracleBIAnalytiscApps.rpd.
When I click update Row Count, it gives me below error message:
There was an error while updating row count for "Oracle Data Warehouse"."Catalog"."DBO"."W_CTRY_REGN_D":
[nQSError :17001] Oracle Error Code: 942, message: ORA-00942:Table or view does not exist at OCICallSTmTEXECUTE
Whereas when I click on some other tables for Row count there is not error.
Also, When I am trying to look for some specific table which exist in Data Warehouse (that has the data), it does not exist in the rpd.
Kindly assit me.

hi,
Have a look
Not able toView Data in Answers
Let me know
thanks,
saichand.v

Linking tables between Pages and Numbers

I would like to link a table in Numbers to Pages so that the table can auto update in Pages when it is changed in Numbers. Anyone know if this is possible?
thanks!

This is not possible at the present time.
Regards,

Table relations between vbrk and bkpf for Accounting Document Number

hello,
i am using 4 tables to get data into my programs.
vbrk,vbrp konv and bkpf.
i want to get belnr from bkpf.i found relation between vbrk and belnr.but in vbrk table belnr's value is initial.
can anybody tell me that how should i relate vbrk and bkpf or how to get Accounting Document Number(belnr) from bkpf for Billing Document(vbeln).
regards,
soniya s.

hi,
chekc this. its working for me.
data : WA_AWKEY LIKE BKPF-AWKEY.
data : WA_BELNR LIKE BKPF-BELNR.
data : LENGTH TYPE I.
*BREAK MTABAP.
LENGTH = STRLEN( IT_VBRK-VBELN ).
if LENGTH = '10' .
MOVE it_vbrk-VBELN TO WA_AWKEY.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR.
CLEAR WA_BELNR .
CLEAR WA_AWKEY .
else.
CONCATENATE '0' it_vbrk-vbeln INTO wa_awkey.
SELECT SINGLE BELNR FROM BKPF INTO WA_BELNR
WHERE AWKEY = WA_AWKEY
AND AWTYP = 'VBRK'
and blart = 'RV'.
it_final-acc_doc = WA_BELNR .
CLEAR WA_BELNR .
CLEAR WA_AWKEY.
endif.

Differrences between structure and table in data dictionary in ABAP?

What is the differrences between structure and table in data dictionary in ABAP?
are they same?

Tables :
1. The place where the data is stored so that you can retrieve at any time.
2. There can be more than one record stored
Structures :
1. The data / info stays only during the runtime of the application and will not get stored at all during the run time ....
2. Only one record can be stored at the runtime .....
A structure forms the skeleton of the table.
A structure comprises components i.e., fields. Types are defined for the components A component can refer to an elementary type (via a data element or by directly specifying the data type and length in the structure definition), another structure or a table type. A structure can therefore be nested to any depth
Tables can be defined independently of the database in the ABAP Dictionary. The fields of the table are defined with their (database-independent) data types and lengths.
When the table is activated, a physical table definition is created in the database for the table definition stored in the ABAP Dictionary. The table definition is translated from the ABAP Dictionary to a definition of the particular database.

Best Practice - Outer Join between Fact and Dim table

Hi Gurus,
Need some advice on the below scenario
I have an OOTB subject area and we have around 50-60 reports based on it. The related subject area Fact and Dim1 table are having inner join.
Now I have a scenario for one report where outer join has to be implemented between Fact and Dim1. Here I am against changing the OOTB subject area join as the outer join will impact the performance of other 50-60 reports.
Can anyone provide any inputs on what is the best way to handle this scenario?
Thanks

Ok. I tried this:
Driving table : Fact, Left outer join -- didnt work.
Driving table: Dimension D left outer join -- didnt work either
In either the case, I see physical query as D left outer Join on Fact F. and omitting the rows.
And then I tried this -
Driving table: Fact, RIght outer join.
Now, this is giving me error:
Sybase][ODBC Driver]Internal Error. [nQSError: 16001] ODBC error state: 00000 code: 30128 message: [Sybase][ODBC Driver]Data overflow. Increase specified column size or buffer size. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
I checked all columns, everything matched with database table type and size.
I am pulling Fact.account number, Dimension.account name, Fact.Measures. I am seeing this error each time I pull Fact.Account number.

OTL - Table Relationship between Timecard and Workflow

Hi All,
Our employees work multiple projects and charge their time thru OTL to each of individual project as appropriate every pay period. Each project has it's own project manager. When an employee sumbits his timecard for approval the workflow routes an approval notification to EACH project manager. Every project manager must approve the employee's timecard before the "overall" timecard status is APPROVED.
For example, an employee works on four diffent projects - each project has a different PM. When the employee submits his timecard for approval an approval notification is sent to all four PMs. However, more than occasionally at least one of the PMs doesn't approve the timecard in a timely fashion so the employee's timecard is "hung up" waiting for approval.
I need to write a query in which I specifiy both an employee and particular pay period, and the query returns for the employee/pay peirod EACH Project Name, the PM for the respective project, and whether or not the the PM has approved the employee's time for the respective PM's project in the specified pay period.
Unfortunately I don't really know where to start. I don't know if there is an HXC or group of HXC tables that would allow me to report on the individual project manager's 'status' (i.e., has a PM approved his project in the employee's timecard)...or do I need to allow include some workflow tables such as (maybe ?) wf_notifications ? And if I need to include some WF tables can someone help me understand where the relationship between timecard and WF is definded/stored (in other words, for a particular timecard how can I query a WF table - for example, wf_notifications - and find all the respective notifications associated with that particular timecard ?
I hope my question is clear, but please advise if you have any questions. Thanks in advance for the help !!
Jeff

Hi Jeff,
Did you ever get an answer on this question, as I have similar issues.
One question you may be able to answer - Do all approvals on the project side need to be done for ANY project information to pull into Project Accounting, or as each Project Manager approves their portion does it pull in to PA?
Thanks very much!!
Lori

Database table/FM to find relation between plant and company code in SRM

Hi,
I have a requirement where I need to determine the relation between the plant and company code in SRM.
The plant and company code both belong to R/3. We are replicating the plant by using the report BBP_LOCATIONS_GET_ALL.
This plant is now available as a BP in SRM. But from which SRM table or using which SRM FM can I get the relation between this and the company code?
Thanks,
Srivatsan

Hi
<b>Check table BBP_LOCMAP. (Plants) - Manage Table Business Partner > System > Location
BBP_COMPCODE_FAV User-Specific Favorites for Permitted Company code.</b>
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

View Selector - Switch issue between Graph and Table Data

Hi:
We have created the report with both Table view and Chart View. Both of them has been added to the View Selector and added to the Dashboard. While performing the testing we found that sometimes the Switch between the views are not happening. Meaning when we try to switch from Chart View to Table View, the View changes in the drop down but the original Graph to table will not switch. In order to make that happen we need to try 3 or 4 times across the drop downs from Table to Chart and then chart to table.
Did any one face the similar issue. Any suggestions or insights on this.
Please help.
Thanks & Regards
Sunil Kumar T.S.

hey there RAM,
here are a few tips...
1. what is the table field with the right value? and is this table field in the *itm extractor?
2. can you include this field into the extractor?
3. could it be a calculated value?
hope this helps.

Raletions tables between SC and PO.

Similar Messages

Maybe you are looking for