RAM and HDD in 2013 MBP user-upgrade-able?

Are these things upgrade-able on a 2013 MBP without voiding the warranty?
I know previous models have been, as seen in this discussion
I just want a clear answer, since there are a lot of conflicting reports out there...
Regards

Makes perfect sense, and that answered the question! Thanks!
sig, I was referring to the standard model, not the Retina. I did know that, but I should have been more clear. I'm glad you pointed that out, to save anyone else reading this question some confusion.
The fact that there are no user-serviceable parts on the Retina MBP is one main reason why I am opting for the non-Retina one. It's a shame too, because I hear that screen is amazing, but I want to be able to upgrade my RAM/HDD and pull my HDD if I ever had a serious issue (not that I expect to, but you just never know).

Similar Messages

M6-n010dx RAM and HDD upgrade

Hello,
i was thinking of upgrading the RAM and HDD of my laptop but was not sure if the products i selected are compatible.
My concerns arise from the fact that the n010dx has AMD processors.
If someone would confirm that the chosen parts are compatible, it would be great.
Links included below:
-RAM
http://www.amazon.ca/gp/product/B006YG8X9Y/ref=ox_sc_act_title_7?ie=UTF8&psc=1&smid=A3DWYIK6Y9EEQB
- SSD
http://www.amazon.ca/gp/product/B00KFAGCWK/ref=ox_sc_act_title_6?ie=UTF8&psc=1&smid=A3DWYIK6Y9EEQB
thank you!

Hello and welcome to Apple Discussions. No questions are too basic, as we all have to start somewhere.
Emac models are best differentiated by the CPU speed.
You can go to the Menu item  About this Mac will tell you the CPU speed.
From what you have said it sounds like a later model eMac.
is there some kind of issue that arises when one installs more than 1gb?
No, it is just that when these eMacs came out the highest RAM module made at the 333 Mhz speed was 512Mb. Later the manufacturers made 1Ghz modules, thus doubling the capacity from the original specifications. Keep in mind there are two slots for these modules. 1Ghz X 2 = 2 Ghz maximum.
Also, I have noticed that my apple is quite noisy; whilst it doesn't sound like a worringly noisy computer, how much noise of this is due to the harddrive?
None of it is due to the hard drive. Hard drive noise is intermittent and barely noticeable. The noise is the roaring of the fan. eMacs are notable for their robust and noisy fan.
Replacing the hard disk in an eMac requires quite some dissassembly.
Someone else may post disassembly links as I my old ones don't work anymore, and you may also get more detail about your RAM questions.

Which Apple MacBook Pro has the most RAM and HDD memory?

I would like to know this because I plan on buying a MacBook Pro and I just want to make sure I'm buying the one with the most RAM and HDD memory and not some other one. Why do I need specifically this? Because I'm a gamer; I like playing games. I'm a watcher too; I like watching movies. Last but not least, I would like to sync my iPhone to a device that's from the same company. I don't know why, but I guess it's because I don't like uncoordination, or something like that. In short, I don't believe in "clashing". Even electronics.

The Hardware In Any Mac is Exactly the same as used in Any PC of like model year and included hardware. i7 being faster then an i5 CPU.
Apple uses the same exact Intel CPUs and Chipsets that all other computer use manfacturer today. There is No difference.
Ogelthorpe is comppletely correct that Windows, by nature of the OS, is better for running games and the hardware it comes on, by nature of the way they are manufactured even though it is the same hardware as in a Mac, is better for gaming because of the way they are cooled and the overall case design. More air vents and better air movement across the parts that get hot while gaming.
Mac notebooks on the other hand don't cool as well by nature of the air intake and exhaust systems. Both air intake and exhaust are at the screen hinge and the fans are designed to be quieter then on most Windows PC notebooks. Even if Windows is installed on Mac that Mac will run hotter then a PC with the same exact hardware configurations. This is a fact and experienced by many Mac users. Including myself.
Mac fans run all the time. From the second you start them up to the second they shut down completely. I personally don't know of any Windows PC notebook that do that. My Dell E6420 with the exact same CPU and more RAM, 16GBs in the Dell and 8 in my Mac, with the Dell having 2 drives, one a SSD the other a Spinner in the media bay, and the Mac having only one Seagate XT series in the main bay the Dell fans rarely come on unless I am taxing the system in some way. They are not on continuously and certainly not when I turn the system on. So Apple has designed the Mac to run the fans continuously to try and keep the system cool from the first power on.
So your statement is completely false. But it is what most people think even though it is unfounded.
ShaneBunting wrote:
This is not true. The hardware is simply better on a Mac. Even when running Windows on a Mac, you'll have a far better experience than on a PC..

Minimum ram and hdd space need for windows 7

What is the minimum of ram and hdd space memory to use with windows 7. Is the windows 7 faster than vista on the same machine ? thansk
Nothing is impossible

BillWindows said: (...) I bought 4g ddr2 for (...) I think most people should be able to afford an upgrade.
Sorry, but I disagree fundamentally here. While it is true that RAM prices have come down since XP was released, there are many machines out there for which you can't just buy regular RAM around the corner. Either because the systems were designed so that only a certain amount of RAM can be used (e.g., 128 MB on one of my VAIOs) or because they use a special socket or because you are not allowed to open the case or for whatever other reason you can think of.
I am not necessarily complaining. But I frequently hear that Microsoft wants to sell Windows 7 upgrades to XP owners. So if Microsoft wants to upgrade XP owners to Windows 7, they should better make sure that technical requirements are less or equal to those of XP.
And no, it's not given by nature that newer OSes always need to become fatter, slower, and more RAM hungry: have a look at Mac OS X which actually improved performance over the past releases, even on older machines.
Also, before you flame me, I'm not just caring about "museum age" computers. I bought a netbook just months ago and it came with 1 GB of RAM. Warranty is void if I open the case. So I can't "just" upgrade to more than 1 GB RAM.

How to test RAM and HDD (Hard Drive).

Introduction
HP machines have built-in Bios testers for RAM and HDD's.
To use them you need to enter Bios by pressing F10 on startup. They are placed under ' Diagnostics menu '.
Why I wrote this guide and complicate whole situation?
There are three reasons:
This testers are not so great and sometimes they do not detect problems which you may have with your hardware. It's recommended to use more advanced tester for RAM and manufacter diagnostic programs to test HDD's.
Not always you will be able to enter Bios. Sometimes corrupted hardware is blocking possibility to run it.
Advanced diagnostic softwares for hard drives allow to fix some problems.
Table of Contents:
A How to test RAM with Memtest86+.
B How to test HDD (Hard Drive).
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Ad. A
There are few possibilities to run this program. In this guide I will present how to run it from:
CD
       and
USB Flash Drive.
First we need to burn Memtest86+ on a CD or prepare properly USB Flash drive with a special tool.
Here you will find Memtest86+ home page from which you will be able to download correct version of this software.
Solution 1. CD:
        Download ' Pre-Compiled Bootable ISO (.zip) ' and extract it with 7-Zip(free) or WinRar.
        Download CDBurnerXP from here. Install this program and run it.
        Choose ' Browse ISO image '.
        and point Memtest86+ iso file.
        Click ' Burn disc '.
        Wait until burning process will finish.
        Choose ' OK '.
        Exit from program.
Solution 2. USB Flash Drive:
         Download ' Auto-installer for USB Key (Win 9x/2k/xp/7) ' and extract it with 7-Zip(free) or WinRar.
         Connect USB Flash Drive to one of USB ports. Run ' Memtest86+ 4.10 USB Installer '.
         Click ' I Agree '.
         Select USB Flash Drive and check box to format it.
     Caution!
          Format process will erase all information from USB Flash Drive. If you have there something important then please backup this data first.
           Choose ' Create '.
           Wait until process will finish and click ' Next '.
           Exit from program by choosing ' Finish '.
How to run Memtest86+.
Leave USB Flash drive in USB port or CD in CD/DVD drive. Restart your system and on startup press F9 key repetitively:
After this step you will be able to select from which device you want to boot. Choose from the list ' USB Hard Drive ' if you have prepared USB Flash Drive (like on below photo) or ' Optical Disk Drive ' if you have prepared CD:
How to use Memtest86+ to test RAM?
Do at least 2 - 3 passes. In Errors column may show up only 0. If it's other number then you need to replace corrupted RAM stick.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Mac Mini Upgrade Ram and HDD Drive

Hey there guys, I am going to buy a new mac mini 2.0 Ghz next month. My question is this that on the apple support site it says that if I upgrade the RAM myself or hard disk and I damage any component of the hardware my warranty is void.
My question is this that, If I buy a 320GB Western Digital Sata drive put it in and a 4GB(2Gb x 2) 1066mhz DDR 3 Ram Modules, Will that void my apple warranty, I am planning to get an Apple Care plan to make it a total of 3 years warranty. So where Do I stand? meaning that I don't mind if the new hard disk and ram that I buy myself is not covered in the warranty as I will have individual warranties from the respective companies.
But still does it means that, everything is covered Minus the hard disk and ram that i Individually buy.. everything else would still be covered for the 1 year initial warranty and then 2 year for apple care protection plan. does it mean that?
Is there anyway I don't spoil my warranty? I really cant afford to buy the memory and hard disk from apple, since its too expensive. I am looking forward to get the Mac Mini base line unit, 2.0 Ghz with 1 gb of ram 120gb hdd.

As far as I can see anywhere in Apple documentation there are no officially user-serviceable part in the mini (anyone have a link to the contrary?).
But, in the U.S. at least, warranty law seems to be in consumers' favor these days, and unless you specifically break something with your unauthorized upgrade, Apple still has to honor the warranty.
The mini manual in fact says:
"If you open your Mac mini or install items, you risk damaging your equipment,
and *such damage* isn’t covered by the limited warranty on your Mac mini."
Your damage isn't covered, not the warranty is voided.
But, NEVER EVER send any product in with a user upgrade even if upgrades are officially allowed -- because it's really common to just be sent back a swap instead of your machine. With the mini, you'll want to observe that doubly so, just to eliminate the possibility of them complaining about your upgrade. Keep the original parts, and put them back in if you ever need service.
For this Apple Store situation, the only thing he could legitimately charge you for is a "labor charge" for the act of having to remove your RAM *for testing the other problem*. That should be like $30 not $300, and you should get your custom RAM back in a little baggy. Tricking you into buying Apple RAM to "solve" your other warranty problem, or as a condition of getting warranty service, is probably fraud.
Nonetheless -- definitely not a good idea to bring in the mini with the custom RAM in the first place...
Note that there are some gray areas as to damage -- for example if you put in a processor upgrade (in the older minis with processor sockets) and that ran much hotter, Apple could legitimately claim the heat damaged some other part that failed.

Self RAM and HDD upgrade on mac mini

I would upgrade by myself RAM AND/OR HDD on a mac mini late 2009, will I void the warranty doing that kind of upgrade by myself?
Thank you
Message was edited by: eatrese
Message was edited by: eatrese

Hi Dahveed-
The question the original poster asked was if adding RAM would break his warranty. The answer, backed by the legal language in the Mini user guide, the Apple Hardware limited warranty booklet and the page on the Apple website is NO. Period. BUT if adding the RAM is the cause of failures or problems, then yes, the warranty will end immediately and forever. I believe I stated that quite clearly.
The statement that the apple web article is from 2004, and is therefore invalid, might work for some people on an emotional level, but not to a lawyer. Apple is wearing a big red bullseye on their back for as long as it remains up on the website.
I understand that you might be hung up on the idea that since there are no user serviceable parts in the Mini, you are breaking warranty by servicing the Mini.
This is not correct, and you will not find any language in any Apple documentation that says, "Servicing the Mini will void your warranty." If you can find that language anywhere, please correct me- I would be the first to admit I was wrong.
What Apple says is that since the Mini has no user serviceable parts, if you DAMAGE the Mini while servicing it and you are not an Apple Authorized repair center, YOU are liable for the damage, and not Apple. (Refer to Exclusions and Limitations paragraph F in the Apple Hardware Limited Warranty document in the Mac Mini box)
If the little RAM upgrade project had no bearing whatsoever on the problem your Mini suffers from, the warranty coverage applies.
Legally, warranties are always a bit of a corporate headache because a company must be very specific about what is NOT covered. This is why many electronics manufacturers, in addition to using specific language about what voids a warranty in the manual, often take the additional step of placing decals or other tamper-proof seals on sensitive internal components to assure that no servicing can be done. Nowhere inside the Mini, and nowhere in the manual and the warranty booklet does it say that servicing the Mini voids the warranty.
It is unfortunate that a couple of upgraders were allegedly turned down for service, but if they were turned down because their upgrade damaged, say, an Airport antenna or if they shorted something out by accidentally touching something, then yes, that shouldn't be covered.
On the other hand, if they can independently confirm with another repair center that the needed repairs were not in any way related to their upgrade, then they have a good claim on their hands, and a lawyer would say they had a good case against Apple.
Then again, I would be willing to bet that if those 2 posters had opened up their Mini again, taken out the upgrades, replaced them with the original apple parts, and THEN sent it in for service, they would have had no problems whatsoever.

Macbook 7.1 (mid-2010) RAM and hdd upgrade questions!

Hello!
In a bit of impulsiveness, I have just acquired a Apple laptop: a lightly used Macbook 7.1 (released mid-2010 and discontinued, 2.4GHz Core 2 Duo). This is my first Apple computer!
I want to upgrade just a wee bit to squeeze a bit more performance out of what is currently probably a mid to low end laptop. Two questions:
1) I know this Macbook takes 1066 MHz DDR memory. But I have two 2 GB sticks of 1333 MHz PC3-10600 DDR3 SODIMM. Can I put those in? Or do I have to get 1066 sticks?
2) I'd like to put a 7200 rpm hdd in it. Will there be any potential issues with heat? (I'm assuming a 7200rpm drive generates more heat than a 5400rpm drive.)
Thanks!!!!

Faster RAM will have a great chance to lead to problems. If it works it will not be noticeably faster; The bus speed is still 1066. Ram being cheap I would either put in more ram and not faster ram, buy from high reputation suppliers like Crucial, OWC.
The 7200 will not lead to problems, be sure that it is compatible, the fastest way to replace if you are using (snow) leopard OS: make a clone of the existing drive to the new one, boot from it when still outside, to test; replace the internal disk with the new one, et voila...

Ram and hdd upgrade questions

Hay; i'm a apple newbe so forgive me if any of the questions are basic ones.
I've been trying my hand at things like garageband using a emac that I purchased on ebay but would like to upgrade the ram and the hdd.
Any answers to any of the below would be extremely helpfull - fyi, about this mac says I have a powermac6.4.
Ram:
Google says that my model can take 2gb of ddr333 ram but only 1 gb is supported; is there some kind of issue that arises when one installs more than 1gb?
Also, should I get low or high dencity ram?
Hdd:
Installing ram seems easy enough, but instructions for installing the hdd seem to differ per site that I visit. Would someone be able to link me to some instructions for my model that are known to be correct?
Idealie i'd like to put a 250gb drive in there, but i'm wondering if this would result in 48lba issues?
Just out of interest, how much of a speed boost can I expect when going from 5400 rpm to 7200?
Also, I have noticed that my apple is quite noisy; whilst it doesn't sound like a worringly noisy computer, how much noise of this is due to the harddrive?
Thanks for any answers.

Hello and welcome to Apple Discussions. No questions are too basic, as we all have to start somewhere.
Emac models are best differentiated by the CPU speed.
You can go to the Menu item  About this Mac will tell you the CPU speed.
From what you have said it sounds like a later model eMac.
is there some kind of issue that arises when one installs more than 1gb?
No, it is just that when these eMacs came out the highest RAM module made at the 333 Mhz speed was 512Mb. Later the manufacturers made 1Ghz modules, thus doubling the capacity from the original specifications. Keep in mind there are two slots for these modules. 1Ghz X 2 = 2 Ghz maximum.
Also, I have noticed that my apple is quite noisy; whilst it doesn't sound like a worringly noisy computer, how much noise of this is due to the harddrive?
None of it is due to the hard drive. Hard drive noise is intermittent and barely noticeable. The noise is the roaring of the fan. eMacs are notable for their robust and noisy fan.
Replacing the hard disk in an eMac requires quite some dissassembly.
Someone else may post disassembly links as I my old ones don't work anymore, and you may also get more detail about your RAM questions.

Ram and HDD Upgrade

Hi all, i am looking at upgrading my Macbook Pro 13 inch to a higher spec this month, due to using it constantly at uni on an interactive media course. I use all Adobe suite software, such as Photoshop, Illustrator etc, and i also use software such as Zbrush, Maya and Topogun for 3D character modelling. As you can imagine it crashes my mac quite a lot. I also have Bootcamp installed with Windows xp SP2 Professional version, in order for me to run 3D Studio Max. At the moment i have 2gb of RAm and a 160GB HDD.
I was looking at upgrading to 4GB of ram, and perhaps 500GB HDD, however i saw in a forum that someone had upgraded to a 1Terabyte HDD without any problems. This seems better for me as i could keep literally everything such as Photos, all my music and at least 200 GB worth of movies all in one place rather than using multiple, old, external drives.
Now what i wanted to know is would it be more beneficial to upgrade to 4GB of RAM or would you suggest more, perhaps 8 due to the programmes i run etc. And also any information on the terabyte HDD would be appreciated.
Another question is where can i source these parts cheap in the UK, as i will be buying them myself for my birthday and as a student i'm pretty skint! Thanks in advance!
Jamie.

A drive like this might be what you're after:
http://eshop.macsales.com/item/Samsung/HM100UI/
And the RAM:
http://eshop.macsales.com/item/Other%20World%20Computing/8566DDR3S8GP/
(Your use means the most RAM you can have the better)
You could find better deals on Amazon UK possibly ...

Upgrading the ram and hdd myself

Well i have read the following page on the apple site
http://support.apple.com/kb/HT1270
And i have a fair idea on how to upgrade the ram and the harddrive.
My question is will doing so void my warranty? and applecare?

Doing the replacements yourself will not void the warranty provided you don't damage anything in the process - just make sure you have the right tools and follow the instructions (in the little handbook that came with your Mac) carefully.

App-V 5 SP2 and publishing Office 2013 to users on RDS

Hello
I have a problem with App-V 5 on RDS Servers.
My scenario is like this, I have Office 2013 published Globally to over 20 RDS servers and I'm using App-Locker and groups to control access to the Office 2013 package.
Now when I add a new user to the office 2013 group he doesn't get the Office package published to him because the packages is in use and will be try'd at a later time. Witch means computer restart but I also have network loadbalance and session broker so the
user isn't always logging to the same server.
Has anyone had this problem or know how I can publish the Office 2013 package to the user's without restarting.
Best Regards Kristjan R. Halldorsson

Hello,
I am truely confused by how you are attempting to achieve things.
1. The Office 2013 package is only supported if deployed globally
2. AppLocker is the way to restrict users from starting different applications
3. Office 2013 is not supported to be published to users
It seems you have issues with #3. Which is not supported. I am not saying it "doesn't" work, but considering you have issues with it - perhaps we can start by not doing it?
Ok, so what do we have left;
Per your statement, Office 2013 is published globally. Ergo, all shortcuts and applications should be available to all users.
Is this true?
Nicke Källén | The Knack| Twitter:
@Znackattack

DV7-6150ev ram and HDD replace

I have a DV7-6150ev for business purposes. I face some ram issues and I am would like to replace it. First of all I can’t find any technical manual to show how to replace the ram and also I would like also to replace the HDD with a Western Digital Black² 1.12TB Hybrid WD1001X06XDTL.
I was thinking to add 16GB ram. Will the laptop recognize it? Will it recognize the HDD?
Thank you in advanced for your answers.

05/08/14 - Jeff reached out to customer
I work for HP

Upgrading ram and HDD

i see that quite some users decide to upgrade their HDD's and RAM themselves. i was wondering if any ddr2 667 ram module would work for the macbook, or does it need a special kind ? i think ive seen on ebay "macbook ram" or macbook compliant ram or something like that. Cant i just use lets say a regular kingston ddr2, 667 1gb module of ram? Same question for the HDD. I know it has to be 2.5 inches thick and ATA interface i believe. are those all the requirements ? thanks for any help in advance

Any DDR2 667 SODIMM module will work just fine. Be aware that it may seem insanely hard to push it in but just be careful and it'll pop in.
As far as hard drives go, just make sure it's a 2.5" SATA (aka Serial-ATA) drive. If you get a regular ATA drive it will not work
edit- I just recalled one thing: Don't get corsair RAM, as it seems to not work in macbooks (or at least it didn't a few months ago). All I did was go to newegg and check the reviews to see if people had problems with their macbooks.

Tecra 8100 - Upgrading RAM and HDD

Hi,
I have just got a Toshiba Tecra 8100. I don't like having such a small HHD and I was wanting to know how big I can get it up to. I know there are threads already asking this same question but technology keeps getting better so maybe there are HHD I can get.
I am also wanting to upgrade the RAM. I have seen places that sell PC100 144pin 512mb and I was wondering if it is possible to upgrade this to 2 of them or not.
Any input would be great!!!!
Thanks,
Doug

Hi!
The Tecra 8100 was delivered with HDDs up to 20GB. Im pretty sure that this notebook has a 28bit LBA limitation ([www.48bitlba.com]).
I dont know which HDD you have at the moment but a HDD with 40GB or 60GB would work in this oldie.
Furthermore the Tecra 8100 can be upgraded to 512MB RAM. So you cant upgrade your notebook to more RAM.
Bye

RAM and HDD in 2013 MBP user-upgrade-able?

Similar Messages

Maybe you are looking for