Random crashes when using 16 Labview with the 32 bit labview

I am using 2 versions of Labview at the same time, one is version 4 which has a camera and a weigh-in-motion scale attached to it. The second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit, i'm not sure. The sixteen bit has a data acquisition system attached to it. Its an optim electronics system and the 16-bit Labview drivers for the optim were provided by Optim electronics and so I am stuck with using the same system. When I use both these systems in tandem, the system crashes frequently, but both systems run fine independently. It usually just freezes up or says "Illegal operation performed. Contact program vendor". Its a windows error with a red cross.

So a guy goes into his doctors office and tells his doctor "Ya gotta
help me doc...it hurts when I run my head into the door like
this...OW!". Then the doctor says:
"DON'T DO THAT ANY MORE!!!"
(I promise to keep my day job...oops what job...and not go into
comedy..)
Why don't you convert all the old 16 bit code into 32 bit code and
create one application where the various parts all know about each
other? I don't think that there's any way to coordinate an old 16 bit
LV and a new 32 bit LV application so that they don't step on each
other driverwise like they appear to be doing. I don't think that the
two LabVIEW's even know that the other exists!
Alternatively, get a second computer to run the 16 bit code on and
make the two apps communicate with
each other using TCP/IP or serial.
Doug De Clue
[email protected]
cincidude wrote in message news:<[email protected]>...
> I am using 2 versions of Labview at the same time, one is version 4
> which has a camera and a weigh-in-motion scale attached to it. The
> second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit,
> i'm not sure. The sixteen bit has a data acquisition system attached
> to it. Its an optim electronics system and the 16-bit Labview drivers
> for the optim were provided by Optim electronics and so I am stuck
> with using the same system. When I use both these systems in tandem,
> the system crashes frequently, but both systems run fine
> independently. It usually just freezes up or says "Illegal operation
> performed. Contact program vendor". Its a windows error with a red
> cross.

Similar Messages

Random crashes when using USB drive with Creatie Suite

I have a 24" Intel IMAC and when using a SanDisk Cruzer Titanium 2GB and Creative Suite I eperience random crashes in CS. When I remove th drive it works fine, any known issues when using Rosetta apps and USB drives?
thanks

So a guy goes into his doctors office and tells his doctor "Ya gotta
help me doc...it hurts when I run my head into the door like
this...OW!". Then the doctor says:
"DON'T DO THAT ANY MORE!!!"
(I promise to keep my day job...oops what job...and not go into
comedy..)
Why don't you convert all the old 16 bit code into 32 bit code and
create one application where the various parts all know about each
other? I don't think that there's any way to coordinate an old 16 bit
LV and a new 32 bit LV application so that they don't step on each
other driverwise like they appear to be doing. I don't think that the
two LabVIEW's even know that the other exists!
Alternatively, get a second computer to run the 16 bit code on and
make the two apps communicate with
each other using TCP/IP or serial.
Doug De Clue
[email protected]
cincidude wrote in message news:<[email protected]>...
> I am using 2 versions of Labview at the same time, one is version 4
> which has a camera and a weigh-in-motion scale attached to it. The
> second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit,
> i'm not sure. The sixteen bit has a data acquisition system attached
> to it. Its an optim electronics system and the 16-bit Labview drivers
> for the optim were provided by Optim electronics and so I am stuck
> with using the same system. When I use both these systems in tandem,
> the system crashes frequently, but both systems run fine
> independently. It usually just freezes up or says "Illegal operation
> performed. Contact program vendor". Its a windows error with a red
> cross.

IPad randomly crashing when using apps.

Hello everyone,
I have had a 3G 64Go iPad for almost two months by now, and it has never had any physical damage.
The problem I am experiencing is that it keeps crashing randomly when I use apps, especially with "big" apps that require more from the system (it will not crash if I use iBooks or if I watch a film, but there are plenty of games that I cannot launch because they are in 3D).
I restored the whole firmware, but it does not change anything.
(The iPad even crashes very often when I sync it with the MacBook)
I am beginning to wonder if there is not an internal hardware problem, because I really have no idea about where the problem comes from, and it is beginning to be a bit annoying to have an iPad that you can almost only use to check your mail or listen to music !
I would like to know if anybody has had the same kind of issue and found a solution, and what I should do about this.
Thank you very much for your help !

Thank you for your answer Carolyn !
I am going to restore the iPad according to your instructions, but I do not think that this is caused by an app in particular.
I forgot to mention it in the first post, but this has happened from the day I got it; I synced it to my laptop, and since I was in an area with no wifi around by the time, I only put one app onto my iPad, it was the iPhone version of a game, that has crashed several times, just the way it does now with other apps.
I was surprised but did not really worry back then. The app is no longer on the iPad (it's been on the iPad for a few days only) and even if it had been the one causing all the crashes, it has been removed and the device has been restored since, so I don't get how it could have kept the problem...
I also forgot to say that, when my iPad crashes, there is a kind of "white stripe" across the screen for a fraction of second, then it reboots (and often crashes again as soon as it has finished rebooting); I even had a really weird screen once, which made me worry, with white lines of program written across the reboot screen (the black one with the apple logo in the middle), and I remember the last line said "Panic: we are hanging here..." !
(I took a picture of the screen, if it helps...)
I don't think I forgot anything more.
I am going to try to restore it the way you told me anyway, and see if it helps, but I do not have much hope !
Thank you very much for your answer though, I will feedback as soon as I am done restoring it, and I keep waiting for your advice in the meantime.

N95 will crash when using voice tags with HS-4W

When I try and use my Nokia Bluetooth Head Set HS-4W to access voice tags it always resets!
Anybody else got this problem?

I finaly got it to work by resetting the headset.
No problem whatsoever with voice dialing.
I have firmware V30.0.15
Do you have the problem when using voice tags on the phone alone?

Labview 8 crashes when using Read Labview Measurement File

Hi All,
I am a new user for Labview. I installed Labview 8.0 from the CD (evaluation copy). I was just testing the sample code provided by NI. I opened the "Load from File and Display" example and I was trying to open the properties for the Read Labview Measurement File component when Labview crashed. I tried it a couple of times and everytime it happens the same way (when I double click the component or right click on it).
I am using Windows XP with all the updates done. In the Windows crash report, the application version is 8.0.0.4005.
Other problem I encountered is a missing component on the Input Palette (no DAQ Assistant present) and the Instrument I/O Assistant raises the error "Measurement & Automation Explorer or the Instrument I/O Assistant is not installed correctly. Please install these from the Labview Driver CD". For the last problem, I will try to run the Labview Driver CD, once I get it. But I am not sure if the DAQ Assistant will show up then or not.
Any ideas?
Regards,
Nick

Hello Nick,
While it is not my area of expertise, I would expect the DAQ Assistant would appear after installing the driver CD as you said you would be trying.
What caught my attention was the crash. The easiest way to resolve the crash is to delete the instance of the Read LabVIEW Measurement File on the diagram and place a new one from the Express Input palette (now called "Read From Measurement File"). In that situation, I would expect just pressing OK to accept the default configuration should work. The crash occurs in certain circumstances when the Read / Write Measurement File Express VIs are dropped from a previous version of LabVIEW and then their config page is opened in 8.0.x. This issue should be resolved in a future release, sorry for the inconvenience.

Diadem 11 crashed when using AOP5 plugin with no specific error

We have a ASAM-ODS database and are running a Avalon v4.2e server. DIAdem data TDM file is uploaded using openMDM client.
We have installed AOP5 plugin on 2 systems running DIAdem 11 to access the data directly from the ASAM-ODS database. On one machine it is working fine.
On the second machine with the same parameters, when we try to connect, DIAdem hangs and then crashes with no specific error in the log file. DIAdem is not able to refresh the Navigator window and show the data stored in the ASAM-ODS server. The relevant errors are attached and also the log file of the plugin.
How do we debug and resolve the issue? Any pointers would be welcome. We are using aop5dataplugin2_0_1.exe downloaded from the NI site.
Regards,
Shailesh
Attachments:
Error_1.JPG ‏83 KB
Error_2.JPG ‏49 KB
MDM AOP5 plugin.log ‏783 KB

Hi Shailesh,
Is it possible that the computer this worked on has had a newer version of DIAdem or LabVIEW or DataFinder on it? All three of those NI software packages share a layer called USI, which is what the DataPlugins "plug into". The USI layer only upgrades, so even if you installed a DIAdem 2012 evaluation version and then uninstalled it, you would keep the USI version from DIAdem 2012, and your DIAdem 11.0 would use that newer USI version. It is possible that the latest AOP5 DataPlugin is not compatible with 11.0, which was released nearly 5 years ago. I can look into that and get back to you.
Alternatively, DIAdem 11.0 may be struggling to work with a USI version from LabVIEW 2012 or DIAdem 2012. We do regression testing every release with multiple older DIAdem versions, but at some point the newer features don't work with the older software.
Brad

Iphoto crashes when trying to open with the existing db

Hi there,
iPhoto keeps crashing when i try to launch it with the existing db. I can open it with a new db but am not sure how I can get the old one working.
I love using iPhoto with all the events, faces and other features. Is there a way to get all them back?
Thank you in advance
Here is the crash log:
Process:         iPhoto [270]
Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
Identifier:      com.apple.iPhoto
Version:         9.4.3 (9.4.3)
Build Info:      iPhotoProject-720091000000000~1
App Item ID:     408981381
App External ID: 15017489
Code Type:       X86 (Native)
Parent Process: launchd [123]
User ID:         501
Date/Time:       2013-08-30 17:40:29.477 +0300
OS Version:      Mac OS X 10.8.4 (12E55)
Report Version: 10
Interval Since Last Report:          223 sec
Crashes Since Last Report:           1
Per-App Interval Since Last Report: 8 sec
Per-App Crashes Since Last Report:   1
Anonymous UUID:                      14DBC6AD-2C67-87D4-F3EB-208F45A7B3D8
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '*** -[__NSArrayM insertObject:atIndex:]: object cannot be nil'
Application Specific Backtrace 1:
0   CoreFoundation                      0x921a0e8b __raiseError + 219
1   libobjc.A.dylib                     0x95c5a52e objc_exception_throw + 230
2   CoreFoundation                      0x920ac07b -[__NSArrayM insertObject:atIndex:] + 299
3   CoreFoundation                      0x920abf40 -[__NSArrayM addObject:] + 64
4   iPhoto                              0x00069858 iPhoto + 256088
5   iPhoto                              0x00350d0c iPhoto + 3300620
6   iPhoto                              0x0026065c iPhoto + 2315868
7   libdispatch.dylib                   0x982f1cb1 _dispatch_barrier_sync_f_slow_invoke + 80
8   libdispatch.dylib                   0x982ebc82 _dispatch_client_callout + 46
9   libdispatch.dylib                   0x982f12e3 _dispatch_main_queue_callback_4CF + 223
10 CoreFoundation                      0x9209cc29 __CFRunLoopRun + 1961
11 CoreFoundation                      0x9209c01a CFRunLoopRunSpecific + 378
12 CoreFoundation                      0x9209be8b CFRunLoopRunInMode + 123
13 HIToolbox                           0x92a48f5a RunCurrentEventLoopInMode + 242
14 HIToolbox                           0x92a48cc9 ReceiveNextEventCommon + 374
15 HIToolbox                           0x92a48b44 BlockUntilNextEventMatchingListInMode + 88
16 AppKit                              0x997c993a _DPSNextEvent + 724
17 AppKit                              0x997c916c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
18 AppKit                              0x997bf5cc -[NSApplication run] + 855
19 AppKit                              0x997625f6 NSApplicationMain + 1053
20 iPhoto                              0x0003b0b9 iPhoto + 65721
21 iPhoto                              0x0003a705 iPhoto + 63237
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.CoreFoundation                0x921a16a7 ___TERMINATING_DUE_TO_UNCAUGHT_EXCEPTION___ + 7
1   libobjc.A.dylib                         0x95c5a52e objc_exception_throw + 230
2   com.apple.CoreFoundation                0x920ac07b -[__NSArrayM insertObject:atIndex:] + 299
3   com.apple.CoreFoundation                0x920abf40 -[__NSArrayM addObject:] + 64
4   com.apple.iPhoto                        0x00069858 0x2b000 + 256088
5   com.apple.iPhoto                        0x00350d0c 0x2b000 + 3300620
6   com.apple.iPhoto                        0x0026065c 0x2b000 + 2315868
7   libdispatch.dylib                       0x982f1cb1 _dispatch_barrier_sync_f_slow_invoke + 80
8   libdispatch.dylib                       0x982ebc82 _dispatch_client_callout + 46
9   libdispatch.dylib                       0x982f12e3 _dispatch_main_queue_callback_4CF + 223
10 com.apple.CoreFoundation                0x9209cc29 __CFRunLoopRun + 1961
11 com.apple.CoreFoundation                0x9209c01a CFRunLoopRunSpecific + 378
12 com.apple.CoreFoundation                0x9209be8b CFRunLoopRunInMode + 123
13 com.apple.HIToolbox                     0x92a48f5a RunCurrentEventLoopInMode + 242
14 com.apple.HIToolbox                     0x92a48cc9 ReceiveNextEventCommon + 374
15 com.apple.HIToolbox                     0x92a48b44 BlockUntilNextEventMatchingListInMode + 88
16 com.apple.AppKit                        0x997c993a _DPSNextEvent + 724
17 com.apple.AppKit                        0x997c916c -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
18 com.apple.AppKit                        0x997bf5cc -[NSApplication run] + 855
19 com.apple.AppKit                        0x997625f6 NSApplicationMain + 1053
20 com.apple.iPhoto                        0x0003b0b9 0x2b000 + 65721
21 com.apple.iPhoto                        0x0003a705 0x2b000 + 63237
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib                  0x9496c9ae kevent + 10
1   libdispatch.dylib                       0x982eec71 _dispatch_mgr_invoke + 993
2   libdispatch.dylib                       0x982ee7a9 _dispatch_mgr_thread + 53
Thread 2:: Dispatch queue: com.apple.root.default-priority
0   libsystem_kernel.dylib                  0x9496980e semaphore_wait_trap + 10
1   libdispatch.dylib                       0x982f0e70 _dispatch_thread_semaphore_wait + 25
2   libdispatch.dylib                       0x982f0ccc _dispatch_barrier_sync_f_slow + 149
3   libdispatch.dylib                       0x982ed3fb dispatch_barrier_sync_f + 37
4   libdispatch.dylib                       0x982f1c5a _dispatch_sync_slow + 70
5   com.apple.iPhoto                        0x002605fc 0x2b000 + 2315772
6   com.apple.Foundation                    0x913c9f27 -[NSBlockOperation main] + 188
7   com.apple.Foundation                    0x9139d259 -[__NSOperationInternal start] + 740
8   com.apple.Foundation                    0x9139cf64 -[NSOperation start] + 67
9   com.apple.Foundation                    0x913a5039 __block_global_6 + 135
10 libdispatch.dylib                       0x982eff8f _dispatch_call_block_and_release + 15
11 libdispatch.dylib                       0x982ebc82 _dispatch_client_callout + 46
12 libdispatch.dylib                       0x982ecf02 _dispatch_worker_thread2 + 285
13 libsystem_c.dylib                       0x995c0e72 _pthread_wqthread + 441
14 libsystem_c.dylib                       0x995a8d2a start_wqthread + 30

Here's how to repair your iPhoto database.
How to Rebuild/Repair an iPhoto Library.

MBP keeps crashing when using Internet Tethering with iPhone4

I have had 2 crashes today of my new 13" MBP (I7 CPU, 8 Gb RAM, SSD) while using Ethernet Tethering with iPhone4. This is really embarrassing. I have used PC all my life and this is my first Mac. It's been many years since I have seen Blue screen of death on my PC. I have always heard about super reliability of Mac and could not believed my eyes when I saw the black message. Software industry moved long way improving reliability but looks like Mac team is moving in other direction. Unacceptable!

Same with my MacBook Pro!
I was really upset with this issue.
I got it in early March 2011, just only one month and a few days.
I always connected via USB tethering, it did work.
The problem just started yesterday, it almost 10 times after connect internet.
I called to the technical support and they told me to update to 10.6.7 (Mine was 10.6.6)
Then I updated and it went well (which I found out later that cuz I use the WiFi to connected) for the rest of the day.
But after I came back home and connected via USB , it crashed again.
Then I decided to go to the store at 5th ave. , they checked for a 10 minutes and told me to backup all my data and take it back to them.
Let see what is going to happen next.

Crash when use indexe array with in place element structure

Hello !
I have a problem with in place element structure. I want index a waveform array (16 elements) and when i execute or save that labview close....
I dont have problem with waveform array 15 elements or less, but i need index 16 elements...
Thanks for your help !!!
Solved!
Go to Solution.
Attachments:
Test.PNG ‏8 KB

I give you my code but it work because i used a waveform array with only 15 elements. I can't save or execute with 16 elements...
So add it (like picture Test.png) and you will see.
Thank you
Attachments:
Test.vi ‏25 KB

Does voltage output matter when using an adapter with the macbook???????

i have a generic ac adapter modified with a magsafe plug it works fine on macbook pro i tested it
it is 18.5 volts output 85watts
will it work ok on macbook???

i know that info im trying to find out if using an 18.5 volt universal adapter with a magsafe plug thats 85 watts will it work on a macbook
will the 18.5 volt be too much.....and the 85 watts be ok
note: this is not an apple adapter its a generic one with a magsage plug on it
please dont tell me what is recommended tell me if it will work or not
recommndations are just money making lies from manufacturers to make money

When using Lotus Notes with the latest version of firefox notes will not allow me to attach files?

Uner firefox version I was able to attach muliple doc within my Lotus notes, after upgrading I now get an error message. Program error. What else can I do to fix the problem other than going back to the old version?

I only have an HSA account with USbank, and my screen looks fine.
If the website is okay, you can try goto options->advanced->network, and clear the web cache and try again.

Why does LR5 Beta Keeps crashing when using the brush?

When i use the brush LR5 beta keeps crashing. I have Windows 7 OS. LR5 beta crashes when I am working with the brush on an image. I have to close and re open, but with brush it just crashes again either on the same image or working on another image. Any ideas please?

LR 5 has been released. Please update to the release version and try again.
Download here.

Adobe Photoshop CS4/5 Crashes when using the Move Tool

Hello. I'm here because I'm having an issue with Photoshop.
I was trying out CS5 when it started to crash every time I tried to use the Move Tool. It was the generic error message: "Adobe Photoshop CS4 has stopped working.
A problem has caused Adobe Photoshop CS4 to stop working correctly. Windows will close the program and notify you if a solution is available."
Thinking that it was a CS5 issue, I went back to my copy of CS4, only to find the same thing happening there (I also downgraded because CS5 was also crashing at other random times for some reason, but that's an issue for another time).
This puzzles me because both were working fine before. Granted, I hadn't opened them for a while, but it was a sudden thing.
My first impulse was to uninstall and reinstall CS4. No luck. So then, I uninstalled all third-party plugins, thinking that might be it. Still, the same problem. I started looking around on Google for solutions and found the instructions on resetting the Tool preferences (I chose to reset the preferences for ALL of the tools). When that didn't work, I tried deleting the preferences file outright, which said instructions recommended. Nothing.
I should note that Photoshop crashes when using the Move Tool to move an object without ant lines around it, i.e., a layer. I'll move the object, and after two to three seconds, the mentioned error message will appear and Windows will close Photoshop. This, however, only seems to happen after selecting, copying, and pasting part of a large object with some variation of the Marqee Tool (thus making that part a new layer by default) while working at a zoom of 100%. So, in short, working with a large image like <a href=http://www.wallpaper4me.com/images/wallpapers/ergo_proxy_267_1280-862301.jpeg>This</a> at 100% zoom. The image linked is the image that I was using and am currently using to reproduce the problem. It is 1280x1024 pixels. I have tested this with somewhat smaller, yet comparable images too. Same problem. I have never had this problem working with large images before, and I wonder if anyone has any suggestions short of formatting my hard drive.
The error code, from Event Viewer:
Faulting application name: Photoshop.exe, version: 11.0.2.0, time stamp: 0x4bf2d4f6
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x65637275
Faulting process id: 0xe28
Faulting application start time: 0x01cb2bb3471d87bf
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
Faulting module path: unknown
Report Id: b412e368-97ab-11df-8f49-001d60b646ef
Details:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2010-07-25T05:15:57.000000000Z
EventRecordID
78845
Channel
Application
Computer
Gatherum
Security
EventData
Photoshop.exe
11.0.2.0
4bf2d4f6
unknown
0.0.0.0
00000000
c0000005
65637275
e28
01cb2bb3471d87bf
C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe
unknown
b412e368-97ab-11df-8f49-001d60b646ef
Details in XML View:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2010-07-25T05:15:57.000000000Z" />
<EventRecordID>78845</EventRecordID>
<Channel>Application</Channel>
<Computer>Gatherum</Computer>
<Security />
</System>
- <EventData>
<Data>Photoshop.exe</Data>
<Data>11.0.2.0</Data>
<Data>4bf2d4f6</Data>
<Data>unknown</Data>
<Data>0.0.0.0</Data>
<Data>00000000</Data>
<Data>c0000005</Data>
<Data>65637275</Data>
<Data>e28</Data>
<Data>01cb2bb3471d87bf</Data>
<Data>C:\Program Files\Adobe\Adobe Photoshop CS4\Photoshop.exe</Data>
<Data>unknown</Data>
<Data>b412e368-97ab-11df-8f49-001d60b646ef</Data>
</EventData>
</Event>
System Specifications:
Operating System: Windows 7 Ultimate 32-bit (6.1, Build 7600)
System Manufacturer: HP-Pavilion
System Model: GN697AA-ABA a6214x
Processor: Intel Pentium Dual CPU E2160 @ 1.80 GHz (2 CPUs)
Memory: 2048MB RAM
DirectX Version: DirectX 11
Display Device:
Name: NVIDIA GeForce 8600 GTS
Manufacturer: NVIDIA
DAC Type: Integrated RAMDAC
Approx. Total Memory: 1010 MB
Current Display Mode: 1440 x 900 (32 bit) (60 Hz)
Photoshop Version: CS4 Extended 11.0.2

Even a decent RAM upgrade is usually only a few hundred dollars nowadays, but it's not a trivially simple process. That said, with a little research and care you can do it. Alternatively, you can hire people (e.g., "Geek Squad") to do such an upgrade.
First, you'll need to know what your operating system capacity is. For example, a 32 bit Windows system can really only use up to a bit more than 3 GB of RAM, while a 64 bit Windows system can use all the RAM you can find a place to plug in. What version of Windows are you running?
Then you'll need to determine what RAM you have installed and what your computer's maximum RAM capacity is - usually you can do this through internet research, either by visiting your computer manufacturer's web site or doing google searches. There are even RAM manufacturer web sites that will tell you what kind of RAM your computer needs and suggest sources, for example:
http://www.kingston.com/
It may be that you can just plug additional chips into currently empty sockets, or it is possible you'll need to replace the RAM chips you have installed in your computer to make room for an upgrade. Every computer is different.
If you list your computer model and current RAM that you have installed here, it may be that someone can help with more specific advice.
-Noel

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

When streaming a movie with the new Apple TV, and using a DSL Internet connection, all audio sound works, e.g., the music track, but the audio track with the actor's voices, does not work. What can I do?

Hi Brian,
Thanks restoring and restarting didn't fix my problem - i have started it fresh and still it doesn't work. Basically I press ONCE on the remote, after the machine has not had any commands for 10 minutes, and the cursor skips from one end of the menu to the other - so I can't choose network or update software etc - I sometimes manage to stop it randomly in the middle of the menu if I press on a command in the middle of the cursor skipping all the menu steps...not sure what the problem is but I have basically not used my brand new apple tv since I bought it for that reason! I should call Apple support I suppose! grrrr hate wasting time with stuff like this!
Thanks for your help though!
Pernille

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Adobe flash CS6 crashes when using the type tool or Editing word all the time... please help!

Nobody can tell you anything without proper system info or other technical details. The standard answer with all text issues simply is, that you have a "bad font" on your system and need to get rid of it.
Mylenium

Random crashes when using 16 Labview with the 32 bit labview

Similar Messages

Maybe you are looking for