Random crashes when using USB drive with Creatie Suite

I have a 24" Intel IMAC and when using a SanDisk Cruzer Titanium 2GB and Creative Suite I eperience random crashes in CS. When I remove th drive it works fine, any known issues when using Rosetta apps and USB drives?
thanks

So a guy goes into his doctors office and tells his doctor "Ya gotta
help me doc...it hurts when I run my head into the door like
this...OW!". Then the doctor says:
"DON'T DO THAT ANY MORE!!!"
(I promise to keep my day job...oops what job...and not go into
comedy..)
Why don't you convert all the old 16 bit code into 32 bit code and
create one application where the various parts all know about each
other? I don't think that there's any way to coordinate an old 16 bit
LV and a new 32 bit LV application so that they don't step on each
other driverwise like they appear to be doing. I don't think that the
two LabVIEW's even know that the other exists!
Alternatively, get a second computer to run the 16 bit code on and
make the two apps communicate with
each other using TCP/IP or serial.
Doug De Clue
[email protected]
cincidude wrote in message news:<[email protected]>...
> I am using 2 versions of Labview at the same time, one is version 4
> which has a camera and a weigh-in-motion scale attached to it. The
> second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit,
> i'm not sure. The sixteen bit has a data acquisition system attached
> to it. Its an optim electronics system and the 16-bit Labview drivers
> for the optim were provided by Optim electronics and so I am stuck
> with using the same system. When I use both these systems in tandem,
> the system crashes frequently, but both systems run fine
> independently. It usually just freezes up or says "Illegal operation
> performed. Contact program vendor". Its a windows error with a red
> cross.

Similar Messages

Random crashes when using 16 Labview with the 32 bit labview

I am using 2 versions of Labview at the same time, one is version 4 which has a camera and a weigh-in-motion scale attached to it. The second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit, i'm not sure. The sixteen bit has a data acquisition system attached to it. Its an optim electronics system and the 16-bit Labview drivers for the optim were provided by Optim electronics and so I am stuck with using the same system. When I use both these systems in tandem, the system crashes frequently, but both systems run fine independently. It usually just freezes up or says "Illegal operation performed. Contact program vendor". Its a windows error with a red cross.

So a guy goes into his doctors office and tells his doctor "Ya gotta
help me doc...it hurts when I run my head into the door like
this...OW!". Then the doctor says:
"DON'T DO THAT ANY MORE!!!"
(I promise to keep my day job...oops what job...and not go into
comedy..)
Why don't you convert all the old 16 bit code into 32 bit code and
create one application where the various parts all know about each
other? I don't think that there's any way to coordinate an old 16 bit
LV and a new 32 bit LV application so that they don't step on each
other driverwise like they appear to be doing. I don't think that the
two LabVIEW's even know that the other exists!
Alternatively, get a second computer to run the 16 bit code on and
make the two apps communicate with
each other using TCP/IP or serial.
Doug De Clue
[email protected]
cincidude wrote in message news:<[email protected]>...
> I am using 2 versions of Labview at the same time, one is version 4
> which has a camera and a weigh-in-motion scale attached to it. The
> second is either Labview version 4, 16-bit or Labview 3.0.1, 16-bit,
> i'm not sure. The sixteen bit has a data acquisition system attached
> to it. Its an optim electronics system and the 16-bit Labview drivers
> for the optim were provided by Optim electronics and so I am stuck
> with using the same system. When I use both these systems in tandem,
> the system crashes frequently, but both systems run fine
> independently. It usually just freezes up or says "Illegal operation
> performed. Contact program vendor". Its a windows error with a red
> cross.

Kernel Panic when using USB Drive

This post originally started in the Time Machine topic but it now seems to be a basic issue with the USB i/f.
I am using a iMac IntelC2D to backup to a Seagate FreeAgent 750 USB drive. Everything has been working OK but just recently I have been suffering crashes every time Time Machine runs. I have reset PRAM but the problem persists. I have tested the backup volume on another machine running OS X 10.5.1 and it works OK. Testing with a different USB drive on the iMac causes the same problem. The hard drive itself is therefore OK. It seems to be a problem with the USB i/f on the iMac.
These are a couple of the crash reports which point to com.apple.driver.AppleIntelCPUPowerManagement
Is this a H/W problem? Suggestions are invited.
Wed Jan 9 15:59:00 2008
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x0000677c, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0xfa8d7de0, CR3: 0x010c9000, CR4: 0x00000660
EAX: 0xfa8d7de0, EBX: 0x00c1fb2c, ECX: 0x5ba860d7, EDX: 0x00000bde
CR2: 0xfa8d7de0, EBP: 0x348afd18, ESI: 0xfa8cbfdf, EDI: 0x00000000
EFL: 0x00010046, EIP: 0x0000677c, CS: 0x00000008, DS: 0x04260010
Error code: 0x00000002
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x348afb28 : 0x12b0e1 (0x455670 0x348afb5c 0x133238 0x0)
0x348afb78 : 0x1a7bed (0x45ea20 0x677c 0xe 0x45e1d4)
0x348afc58 : 0x19e517 (0x348afc70 0x0 0x348afd18 0x677c)
0x348afc68 : 0x677c (0xe 0x4260048 0x10 0x10)
0x348afd18 : 0xc0b770 (0xfaac4b9f 0xbde 0x0 0x0)
0x348afe38 : 0x1a8a6a (0xffffffff 0x7fffffff 0x348afec8 0x6)
0x348afe58 : 0x1a1a4e (0x0 0x40f34f0 0xfa8cb366 0xbde)
0x348afe88 : 0x135772 (0x2e85e4bc 0xfa8cb366 0xbde 0x2e85e4a8)
0x348afee8 : 0x135d3a (0x1 0x40f34f0 0x4022e3c 0x0)
0x348aff38 : 0x13685a (0x40f350c 0x0 0x0 0x5b8984)
0x348aff78 : 0x1368db (0x41bf70 0x417ab00 0x0 0x417ab00)
0x348aff98 : 0x41c02f (0x41bf70 0x417ab00 0xbfff7630 0x40f0000)
0x348affc8 : 0x19e2ec (0x417ab00 0x0 0x1a10b5 0x47a0d60)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(9.25.0)@0xc08000->0xc1ffff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9B18
Kernel version:
Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
System model name: iMac7,1 (Mac-F42386C8)
Wed Jan 9 15:59:00 2008
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x0000677c, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0xfa8d7de0, CR3: 0x010c9000, CR4: 0x00000660
EAX: 0xfa8d7de0, EBX: 0x00c1fb2c, ECX: 0x5ba860d7, EDX: 0x00000bde
CR2: 0xfa8d7de0, EBP: 0x348afd18, ESI: 0xfa8cbfdf, EDI: 0x00000000
EFL: 0x00010046, EIP: 0x0000677c, CS: 0x00000008, DS: 0x04260010
Error code: 0x00000002
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x348afb28 : 0x12b0e1 (0x455670 0x348afb5c 0x133238 0x0)
0x348afb78 : 0x1a7bed (0x45ea20 0x677c 0xe 0x45e1d4)
0x348afc58 : 0x19e517 (0x348afc70 0x0 0x348afd18 0x677c)
0x348afc68 : 0x677c (0xe 0x4260048 0x10 0x10)
0x348afd18 : 0xc0b770 (0xfaac4b9f 0xbde 0x0 0x0)
0x348afe38 : 0x1a8a6a (0xffffffff 0x7fffffff 0x348afec8 0x6)
0x348afe58 : 0x1a1a4e (0x0 0x40f34f0 0xfa8cb366 0xbde)
0x348afe88 : 0x135772 (0x2e85e4bc 0xfa8cb366 0xbde 0x2e85e4a8)
0x348afee8 : 0x135d3a (0x1 0x40f34f0 0x4022e3c 0x0)
0x348aff38 : 0x13685a (0x40f350c 0x0 0x0 0x5b8984)
0x348aff78 : 0x1368db (0x41bf70 0x417ab00 0x0 0x417ab00)
0x348aff98 : 0x41c02f (0x41bf70 0x417ab00 0xbfff7630 0x40f0000)
0x348affc8 : 0x19e2ec (0x417ab00 0x0 0x1a10b5 0x47a0d60)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleIntelCPUPowerManagement(9.25.0)@0xc08000->0xc1ffff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9B18
Kernel version:
Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386
System model name: iMac7,1 (Mac-F42386C8)
This is a repeatable problem on the iMac.

Just as final note on this topic. I discussed the problem with the local Apple Repair Centre who advised reinstalling 10.5.1, as suggested by baltwo, before bringing the machine in for repair. I did this and everything seemed OK. It has been running backups for 10 days now without a problem.

MBP keeps crashing when using Internet Tethering with iPhone4

I have had 2 crashes today of my new 13" MBP (I7 CPU, 8 Gb RAM, SSD) while using Ethernet Tethering with iPhone4. This is really embarrassing. I have used PC all my life and this is my first Mac. It's been many years since I have seen Blue screen of death on my PC. I have always heard about super reliability of Mac and could not believed my eyes when I saw the black message. Software industry moved long way improving reliability but looks like Mac team is moving in other direction. Unacceptable!

Same with my MacBook Pro!
I was really upset with this issue.
I got it in early March 2011, just only one month and a few days.
I always connected via USB tethering, it did work.
The problem just started yesterday, it almost 10 times after connect internet.
I called to the technical support and they told me to update to 10.6.7 (Mine was 10.6.6)
Then I updated and it went well (which I found out later that cuz I use the WiFi to connected) for the rest of the day.
But after I came back home and connected via USB , it crashed again.
Then I decided to go to the store at 5th ave. , they checked for a 10 minutes and told me to backup all my data and take it back to them.
Let see what is going to happen next.

IPad randomly crashing when using apps.

Hello everyone,
I have had a 3G 64Go iPad for almost two months by now, and it has never had any physical damage.
The problem I am experiencing is that it keeps crashing randomly when I use apps, especially with "big" apps that require more from the system (it will not crash if I use iBooks or if I watch a film, but there are plenty of games that I cannot launch because they are in 3D).
I restored the whole firmware, but it does not change anything.
(The iPad even crashes very often when I sync it with the MacBook)
I am beginning to wonder if there is not an internal hardware problem, because I really have no idea about where the problem comes from, and it is beginning to be a bit annoying to have an iPad that you can almost only use to check your mail or listen to music !
I would like to know if anybody has had the same kind of issue and found a solution, and what I should do about this.
Thank you very much for your help !

Thank you for your answer Carolyn !
I am going to restore the iPad according to your instructions, but I do not think that this is caused by an app in particular.
I forgot to mention it in the first post, but this has happened from the day I got it; I synced it to my laptop, and since I was in an area with no wifi around by the time, I only put one app onto my iPad, it was the iPhone version of a game, that has crashed several times, just the way it does now with other apps.
I was surprised but did not really worry back then. The app is no longer on the iPad (it's been on the iPad for a few days only) and even if it had been the one causing all the crashes, it has been removed and the device has been restored since, so I don't get how it could have kept the problem...
I also forgot to say that, when my iPad crashes, there is a kind of "white stripe" across the screen for a fraction of second, then it reboots (and often crashes again as soon as it has finished rebooting); I even had a really weird screen once, which made me worry, with white lines of program written across the reboot screen (the black one with the apple logo in the middle), and I remember the last line said "Panic: we are hanging here..." !
(I took a picture of the screen, if it helps...)
I don't think I forgot anything more.
I am going to try to restore it the way you told me anyway, and see if it helps, but I do not have much hope !
Thank you very much for your answer though, I will feedback as soon as I am done restoring it, and I keep waiting for your advice in the meantime.

Finder Restarts when using USB Drive

Hello. I have a SanDisk Cruzer Micro 1GB usb flash drive. Sometimes when I add files to the drive, the finder quits and restarts. I have no problems when using it on a windows computer and it doesnt quit on my apple when trashing files, usually when only adding new ones. Sometimes it quits when done adding the file and sometimes in the middle. Any help!? Thanks

bump up...come on. any ideas???

Macbook air crashed when using USB.

My macbook air crashed when I plugged in my new portable charger in the USB, and it refuse to start again. Nothing is happening when Im trying to start the mac. Is the macbook totally destroyed or can I fix this in some way? appreciate your help!

You should also ask this in the MacBook Air forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_air

N95 will crash when using voice tags with HS-4W

When I try and use my Nokia Bluetooth Head Set HS-4W to access voice tags it always resets!
Anybody else got this problem?

I finaly got it to work by resetting the headset.
No problem whatsoever with voice dialing.
I have firmware V30.0.15
Do you have the problem when using voice tags on the phone alone?

Diadem 11 crashed when using AOP5 plugin with no specific error

We have a ASAM-ODS database and are running a Avalon v4.2e server. DIAdem data TDM file is uploaded using openMDM client.
We have installed AOP5 plugin on 2 systems running DIAdem 11 to access the data directly from the ASAM-ODS database. On one machine it is working fine.
On the second machine with the same parameters, when we try to connect, DIAdem hangs and then crashes with no specific error in the log file. DIAdem is not able to refresh the Navigator window and show the data stored in the ASAM-ODS server. The relevant errors are attached and also the log file of the plugin.
How do we debug and resolve the issue? Any pointers would be welcome. We are using aop5dataplugin2_0_1.exe downloaded from the NI site.
Regards,
Shailesh
Attachments:
Error_1.JPG ‏83 KB
Error_2.JPG ‏49 KB
MDM AOP5 plugin.log ‏783 KB

Hi Shailesh,
Is it possible that the computer this worked on has had a newer version of DIAdem or LabVIEW or DataFinder on it? All three of those NI software packages share a layer called USI, which is what the DataPlugins "plug into". The USI layer only upgrades, so even if you installed a DIAdem 2012 evaluation version and then uninstalled it, you would keep the USI version from DIAdem 2012, and your DIAdem 11.0 would use that newer USI version. It is possible that the latest AOP5 DataPlugin is not compatible with 11.0, which was released nearly 5 years ago. I can look into that and get back to you.
Alternatively, DIAdem 11.0 may be struggling to work with a USI version from LabVIEW 2012 or DIAdem 2012. We do regression testing every release with multiple older DIAdem versions, but at some point the newer features don't work with the older software.
Brad

Slow Performance when using USB HD with Time Capsule

I have a 500 GB Time Capsule that I primarily use for network storage for 4 computers (3 Windows and a MacBook Pro). There is about 250 GB of data on the TC. After doing my research, I hooked up a 2 TB WD My Book to the TC USB port (after first reformatting the My Book using Mac OS Extended (Journaled). TC recognized the NAS HD just fine, but when I tried moving files from the TC to the My Book, it took FOREVER. 66 hrs to copy all 250 GB; 46 hours to move 60GB). I tried connecting the My Book directly to my MB Pro via USB and files moved quickly (15 minutes for 10GB). With the My Book connected to the MB Pro, I can access TC over Wifi and copy files directly onto the My Book in little time (again about 15 min for 10 GB). Any idea why the USB transfer rate between TC and the NAS is so slow? I have the most current TC firmware.

Jmiko wrote:
That thread is 5 years old
???? It's from three days ago. The electronic book it references was updated last year.
Plus that was talking about a 2002 Airport Extreme base station, whereas I have a 2009 Time Capsule.
As I mentioned above, the source I quoted is from last year. The thread I cited mentions nothing about
a particular year of base station. Where do you see that stuff?
As for my wifi connection, it seems very fast in all respects. As I mentioned, when I connect the external HD to my MacBook Pro and transfer files over my wifi from the Time Capsule, it boogies along. At any rate, I am not sure why the wifi would have an affect on the transfer rate of 2 disks connected by a USB cable.
My point was that, if that data has to travel over your Wi-Fi connection, the quality of that connection could affect the transfer speed you see. To investigate that possibility, I'd connect your Mac to the AirPort base station via Ethernet, turn your Mac's AirPort circuitry off, and repeat your tests that way.

Odd Issue when using Firewire drive with Leopard-Locks up Dock, etc.

I have an odd issue that has developed on my MBP using OS X 10.5.1 Leopard. It only appears to occur when I plug in my External Firewire Lacie Rugged Hard Drive. I only use that Hard Drive approximately once a week when doing a complete mirror backup of my MBP's Hard Drive using SuperDuper. As far as I can tell the issue occurs only once the Hard Drive is plugged in, not because of SuperDuper or the Backup.
Here is the issue: For some reason within a minute of plugging in my hard drive my Dock doesn't work. It scrolls when I put the mouse pointer down to the Dock but it won't open up any icons I click on. It's just like it doesn't recognize the left mouse button. Also, I am unable to select any menus at the top of the screen. I can left click on them and even right click on an icon such as Macintosh HD on the desktop and there is no response. I am able to drag Windows across my desktop though but it seems overall that my keyboard becomes inactive. For example in a open Numbers spreadsheet I am able to use the left mouse button (so it works then) to select a textbox and get the blinking cursor but yet if I type and use even the delete key there is no response. Even after I'm done with the Hard Drive if I drag the Lacie to the trash to eject it won't eject. The only way to eject it is simply pull the Firewire cable out.
I had a few issues with my system earlier and found out I had some bad memory. The memory was replaced and the problems went away. I am worried I had some corrupted files from that time but what puzzles me is I have used my laptop for weeks with no problems. It is only while I plug in this hard drive. In a worse case if I can't figure out how to fix it I feel I'll have to do a complete format and reinstall Leopard and I don't want to have to do that. This only occurs when I do the backup but can be a pain. Any ideas if I can fix this?

Erase and reformat the ext HD. Then, redo the SuperDuper! backup.

Crash when use indexe array with in place element structure

Hello !
I have a problem with in place element structure. I want index a waveform array (16 elements) and when i execute or save that labview close....
I dont have problem with waveform array 15 elements or less, but i need index 16 elements...
Thanks for your help !!!
Solved!
Go to Solution.
Attachments:
Test.PNG ‏8 KB

I give you my code but it work because i used a waveform array with only 15 elements. I can't save or execute with 16 elements...
So add it (like picture Test.png) and you will see.
Thank you
Attachments:
Test.vi ‏25 KB

HT1948 USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

USB drive with install image is showing in Startup Manager on a Mac Pro, but wont boot. Showing circle with cross strip, and shut down automatically. USB device are made and work on two different MacBook Pro, but used on Mac Pro. Any help?

OS X installers have always been fairly specific, hardware-wise. I haven't read anything reflecting that situation with the Recovery HD, so it may be that the Recovery HD created for the MacBook Pro does not have the necessary drivers for the Mac Pro. Obviously, nothing definitive here, but a possibility.

Can I use a USB drive with the Airport extreme (not the new one) for Time Machine?

I thought I heard that using USB drive for Time Machine over wifi will work with the new, tall Airport Extreme, but not with the previous model, which I have. Anybody know for sure?
thanks.

It is not recommended.. Apple says it doesn't work.. for some people it does for others it is unreliable.. do you really want unreliable backups.
See http://pondini.org/TM/Airport.html

Does Mackie Control work with Final Cut 7 when using USB MIDI?

I have a Mackie Control Universal Pro connected via USB to my mac and it works GREAT with Logic and all the complimentary Logic Studio software.
The problem I am having is, when I try to use it with Final Cut, it wont work at all. I have read the post concerning this that was answered by Andy Mees but, I dont use a true MIDI connection, only USB.
Any thoughts?

Does Mackie Control work with Final Cut 7 when using USB MIDI?
No one will know until FCP 7 is released.
-DH

Random crashes when using USB drive with Creatie Suite

Similar Messages

Maybe you are looking for