Random Error 2046

Ever since I upgraded to flashplayer 10 and Flex 4 I have been getting random error 2046 on my Linux system. I am using no RSL's in my application. I am using the open source flex-4.0.0 sdk and compliling with an ant build file. No changes have been made to the default framwork config file. The application will load fine in firefox or flashplayerdebugger and I can reload it several times with no problems. Then at some point the application won't load and a "Error 2046" message is inserted into by application instead (I will try to remember to take and post a screen shot when it happens again). If I simply exit Firefox or flaashplayer and reload everything is fine again.
This is not a major problem for me when developping but I am worried about it happening when I install it for production use. I have read threads that indicate that this is only a Linux problem and the production environment is Windows based, but I would like to know what is going on before I proceed with the installation.
Thanks,
Shawn

I've updated everything to the latest version of Leopard.
2010 intel iMac
OSX 10.6.7
v10.6.7 is Snow Leopard not Leopard and there is a v10.6.8 update available.
Click your Apple menu / Software Update
Restart your Mac after the update is installed.
Same problem exists then run the Using Apple Hardware Test
Might be a bad graphics card.

Similar Messages

IPHONE 5: can't receive calls & random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network." This occurs even when signal strength or wifi is operational.

IPHONE 5: can't receive calls and random error messages, such as "could not activate cellular data network" and "no connection - network unavailable, please connect to wifi or cellular network." This occurs even when signal strength or wifi is operational, and it does not matter whether wifi is on or off. ATT went through the standard protocol - resetting network, resetting sim card, etc. No changes. Other phones working fine in same region with same carrier. Apple's solution is to restore software, but haven't gone there yet. Anyone successfully addressed this/these issues?

I should point out that it worked when the iPhone was set back to factory settings, but when restored with the backup, data/internet no longer works again, and I get the "Could not activate cellular data network" error message yet again.

C++ application with pro*c generating random errors

Hi there,
As described, I have a C++ application with a pro*c module to access the DB. The problem is that it produces random errors.
Randomly, it fails executing a query, but other times it fails in other modules, or just opening a cursor. I list you two examples of queries that fail:
================================================================
CHECK_CONNECTED
EXEC SQL BEGIN DECLARE SECTION;
long Id_db;
long startValidityMicroseconds_db;
long stopValidityMicroseconds_db;
VARCHAR name_db [LEN_NAME + 1];
VARCHAR creationDate_db [LEN_DATE + 1];
VARCHAR startValidityDate_db [LEN_DATE + 7 + 1];
VARCHAR stopValidityDate_db [LEN_DATE + 7 + 1];
short name_db_ind;
EXEC SQL END DECLARE SECTION;
// Set the key
Id_db = Id
EXEC SQL SELECT NAME,
                         TO_CHAR(CREATION_DATE, :DATE_FORMAT),
                         TO_CHAR(START_VALIDITY_DATE, :DATE_FORMAT),
                         TO_CHAR(STOP_VALIDITY_DATE, :DATE_FORMAT),
                         NVL (START_VALIDITY_MICROSECONDS ,0),
                         NVL (STOP_VALIDITY_MICROSECONDS ,0),
INTO :name_db :name_db_ind,
     :creationDate_db,
     :startValidityDate_db,
     :stopValidityDate_db,
     :startValidityMicroseconds_db,
     :stopValidityMicroseconds_db,
FROM ROP_TB
WHERE ID = :Id_db;
================================================================
================================================================
CHECK_CONNECTED
EXEC SQL BEGIN DECLARE SECTION;
     long objectId_db;
     VARCHAR objectName_db [LEN_OBJECT_NAME + 1];
EXEC SQL END DECLARE SECTION;
strncpy ((char *) objectName_db.arr, object_db.c_str (), LEN_OBJECT_NAME);
objectName_db.len = object_db.length ();
EXEC SQL DECLARE CU_OBJECT_TB CURSOR FOR
SELECT OBJECT_ID INTO :objectId_db
FROM OBJECT_TB
WHERE OBJECT_NAME = :objectName_db;
EXEC SQL OPEN CU_OBJECT_TB;
================================================================
It keeps failing randomly and I don't know really know what my eyes are missing. Sometimes I get a "simple" seg fault because a query returned invalid values and my application crashes, other times I get oracle errors.
I really hope someone could help me here :)
Kind regards!

Well, random because it is not always the same nor the error code.
- Sometimes I get segmentation fault on "sqlcxt";
- "ORA-01024: invalid datatype in OCI call" on queries that usually work
- "ORA-03114: not connected to ORACLE" on queries that usually work
I have run valgrind and the only "place" where there could be an issue is reported to be caused by oracle libs:
==27055== 8,214 bytes in 1 blocks are possibly lost in loss record 193 of 206
==27055== at 0x40046FF: calloc (vg_replace_malloc.c:279)
==27055== by 0x43E2975: nsbal (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x42F04E6: nsiorini (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x4300FD2: nsopenalloc_nsntx (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x42FFD73: nsopenmplx (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x42F91FD: nsopen (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x42BDAFE: nscall1 (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x42BB0D7: nscall (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x435F653: niotns (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x43F9E40: nigcall (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x436AD4B: osncon (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)
==27055== by 0x41EAA31: kpuadef (in /home/oracle/app/oracle/product/11.1.0/db_1/lib/libclntsh.so.11.1)

Random error IN RFC sender channel

Hi all,
Please note that in two different scenarios Same busness system is used but different Sender RFC channels and different Functional modules. In spite of this a random error is occuring. At times scenario works fine and some times it gives error.
"Wrong Sender Agreement:The Sender agreement doe
ot have channel Func_sender_cc"
No error report in SXMP_MONI.
Any clue please.
Regards
venkat

Hi,
Now it is clear very much there is no need of registaring programID specifically any where. Any programID first mentioned in Comunication channel and actived and then defined rfc destination using SM59 with same programID gives successfull test result.
Also for different RFC senders Different ProgramID shall be used to avoid the type errors faced by me.
Hope this helps all
cheers
Venkat

List View webpart from subsite to Top site shows random error "List Does not exist"

Hi All,
We have a list in subsite and we are creating a view for that list which we are showing in one of the top site home page. We have taken care of changing the web and list guid of list view webpart when we added on top site. Its working fine but some time
shows error "list does not exist" but when we refresh the error goes. Is it known issue or if there is any workaround for this? because we cannot go live with this random error.
Rohit Pasrija

try these links:
http://mroffice365.com/2012/01/sharepoint-display-a-list-or-library-from-subsite-to-the-top-level-site/
http://sharepoint.stackexchange.com/questions/37140/display-list-or-library-on-another-site-as-webpart

Error #2046: The loaded file did not have a valid signature in flex 4

As part of our CI build, the ant script that builds the client side (flex 4) projects also runs a set of FlexUnit4 tests on the deployed project. Most of the tests work but a few fail with this error
RSL
http://local.foo.com/bar/com/blah/components/someComponent/framework_4.1.0.16076.swz failed to load.
Error #2046: The loaded file did not have a valid signature.
The build machine is running Ununtu 10.10 with Firefox 3.6 and Flashplayer 10.2. If I run the exact same set of tasks, accessed from the same URL in windows everything passes with no problem. After some searching I did run across this thread: http://forums.adobe.com/message/2747415#2747415 but when I went looking for the libflashsupport.so file mentioned, the Ubuntu docs seemed to indicate that it was no longer needed.
I'm at my wits end here. Is libflashsupport.so actually needed in Ubuntu 10.10 and if so where would I find it? If not does anyone know of another issue that could be responsible for this?

hello,
I have the same issue, Ubuntu 10.10, flashplayer 10.3rc1
mxmlc SimplePrj.mxml -debug=true -benchmark=true --target-player=10 -output ../deploy/SimplePrj.swf
mxlc verbose:
Loading configuration file /home/.../flex-config.xml
Initial setup: 79ms
start loading swcs 9ms Running Total: 88ms
Loaded 34 SWCs: 740ms
precompile: 1062ms
Required RSLs:
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/framework_4.5.0.20967.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/tlf/2.0.0.232/textLayout_2.0.0.232.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/spark_4.5.0.20967.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/sparkskins_4.5.0.20967.swz with 1 failover.
    http://fpdownload.adobe.com/pub/swz/flex/4.5.0.20967/mx_4.5.0.20967.swz with 1 failover.
Files: 540 Time: 3380ms
Linking... 27ms
SWF Encoding... 18ms
/.../SimplePrj/deploy/SimplePrj.swf (80059 bytes)
postcompile: 45ms
Total time: 4259ms
Peak memory usage: 81 MB (Heap: 62, Non-Heap: 19)
I had to copy the swz to deploy folder since failovers are not yet available.
* accessing from windows machines it loads swz without complaints.
Jaco

Error #2046 in SDK 3.4.0

I just installed SDK 3.4.0.6955. I'm using RSL. This error message is produced
now:
Error #2046: The loaded file did not have a valid signature.
Failed to load RSL framework_3.4.0.6955.swz
Failing over to RSL framework_3.4.0.6955.swf
What may be wrong?
Thanks in advance.

I've got the same problem in SDK 3.3.0.4852
[SWF] C:\blabla\blabla.swf - 1,667,956 bytes after decompression
Error #2046: Het geladen bestand heeft geen geldige handtekening.
Failed to load RSL framework_3.3.0.4852.swz
Failing over to RSL framework_3.3.0.4852.swf
[SWF] C:\blabla\blabla.swf.swf - 1,153,335 bytes after decompression
"Het geladen bestand heeft geen geldige handtekening" = dutch for   "The loaded file has no valid signature".
When I create a new project, same problem.
My flex-config looks okay
<runtime-shared-library-path>
      <path-element>libs/framework.swc</path-element>
      <rsl-url>framework_3.3.0.4852.swz</rsl-url>
      <policy-file-url></policy-file-url>
      <rsl-url>framework_3.3.0.4852.swf</rsl-url>
      <policy-file-url></policy-file-url>
   </runtime-shared-library-path>
Thanxs

Oracle client 9.2.0.7 ora-01403 random error

I updated my Oracle Client to 9.2.0.7 version and since this time I have a random error.
It seems that the transaction abort some time, because I have ORA-01403 when I create the insert and just after the select into clause has the error.
I don't want to trap error for security.
Is anybody has the same type of error and how to resolve it?
Thanks

"No No No pl/sql codes are changed in the Db and No line of code are changed in .Net application"
But all of the errors you have listed so far are data errors. Has any data changed in the last 3 years?
ORA-02291 means that you are trying to insert a record into a child table that has no corresponding record in the parent table.
SQL> CREATE TABLE t (id NUMBER NOT NULL PRIMARY KEY,
2 descr VARCHAR2(10));
Table created.
SQL> CREATE TABLE t1 (id NUMBER NOT NULL REFERENCES t(id),
2 other_desc VARCHAR2(10));
Table created.
SQL> INSERT INTO t1 VALUES (1, 'One');
INSERT INTO t1 VALUES (1, 'One')
ERROR at line 1:
ORA-02291: integrity constraint (OPS$ORACLE.SYS_C0099966) violated - parent key not foundNo triggers, not even an Oracle client since I am logged into the database server.
One more time, your random errors have nothing to do with the client version, and everything to do with the data in your database (or the lack of it for the 1403), or the data you are trying to put in (for the 2291).
John

Random errors on Flash Builder 4.5.1 mobile project: FXG elements

I'm kind of frustrated because Flash Builder is starting to report random errors on some mxml components that include FXGs. It's reporting the following errors:
1. 'MyFXG' declaration must be contained within the <Declarations> tag, since it is not assignable to the default
property's element type 'mx.core.IVisualElement'.
2. In initializer for 'mxmlContent', type es.domain.application.skin.assets.fxg.MyFXG is not assignable to target Array
element type mx.core.IVisualElement.
Code example:
<s:Group height="100%"
left="10" right="10" top="40" bottom="10">
<fxg:MyFXG width="100%" height="{content.height+20}"/>
</s:Group>
The curious thing (and frustrated one): these fxgs are included on others components and are working fine. There's no problem with the FXG themselves. If I comment all lines where I get an error, my project starts to compile fine (remember that I got included those very same fxgs in other components in the same project).
Even more curious: if I uncomment those lines my project continues to compile fine! But If I make a clean, It starts to complain again on the very same lines and fxgs.
It is driving me crazy!
Anyone could give me a clue? Has anybody experienced something like this?
Thanks in advance.

Well, finally I've managed to solve the issue:
I've deleted one of the mxml components that contained false fxg errors.
I've created another mxml component with a different name.
I've copied&pasted the content of the first mxml into the new one.
et voila, everything has started to compile again, even if I clean the project.
Really weird and strange issue :S

RANDOM ERROR on BAPI_QUOTATION_CREATEFROMDATA2 and BAPI_SALESORDER_CREATEFR

Dear Forum,
We are having random errors working with those Bapis.
We need to reasign materials from one salesorder / quotation to another and those bapis seemed to work fine, but latelly (specially after a hard testing) random errors may occur, having the following Return Code on the RETURN TABLE:
V1 392: "Material &1 does not exist in storage location &2 &3". and consecuentelly, error V4 248.
The problem is that I check table MCHB for material &1 on storage location &2 and param &3 and I can DO find it! and the second time I run the Bapi it successfully creates the document!
Do you any of you have a clue of what is going on and how can i solve this problem? A coworker of mines told me that maybe is a buffer issue but I couldn't find anything on internet about cleaning the buffers.
Thank you and
regards,
Juan Pablo

Hi Ansberry Kevin,
Pass QUOTATION_PARTNERS-ITM_NUMBER = '0000000'.
And pass customers like this.
QUOTATION_PARTNERS-PARTN_NUMB = '1000000'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
   EXPORTING
     INPUT         = QUOTATION_PARTNERS-PARTN_NUMB
IMPORTING
    OUTPUT        = QUOTATION_PARTNERS-PARTN_NUMB

Error #2046: The loaded file did not have a valid signature.

I have three different applications which suddenly stopped working with this error
Error #2046: The loaded file did not have a valid signature.
None of the sites has been touched in Months, I assumed they would keep working the way they had.
I wonder how many other sites are experiencing this and how many PO'd customers there are out there??
This is really bad business practice, what is causing it?
Dan Pride
Note: the three were developed around the same time, one domain went down for a few days and was then renewed????

Daniel... have you found a solution to your problem?
I am also having the same problem. I was googling with no avail, when I noticed you added this post just yesterday,
so I am thinking that adobe has done something to the swz files hosted on thier servers.
Can someone from Adobe confirm if anything was done to either swz files or the crossdomain files on their end?
I am in the same boat as you... no changes on our side, but the application has suddenly stopped working.
We were building against a beta build of flex 4 (4.0.0.10485)
I wonder which sdk version you are using?
Here is what I see through the debugger...
Warning: Ignoring 'secure' attribute in policy file from http://fpdownload.adobe.com/pub/swz/crossdomain.xml. The 'secure' attribute is only permitted in HTTPS and socket policy files. See http://www.adobe.com/go/strict_policy_files for details.
[SWF] C:\Inetpub\wwwdata\xxxxxxxxx_Application.swf - 847,661 bytes after decompression
Error #2046: The loaded file did not have a valid signature.
Failed to load RSL http://fpdownload.adobe.com/pub/swz/flex/4.0.0.10485/framework_4.0.0.10485.swz
Failing over to RSL framework_4.0.0.10485.swz
Error #2046: The loaded file did not have a valid signature.
PS... I have tried multple PCs (XP, Vista, Server 2008) with different versions of flash player (10.0.45.2, 10.0.22.87)
Any help appreciated.

WTC random error (there's any pathc for WTC)

Hi everyone!
I'm having this error randomly, any BEA developers of this product knows how to
solve this, There will be any patch for WTC sometime?
TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0:ERROR: getConnection can only run
on a node where WTC has been configured
at weblogic.wtc.gwt.TuxedoConnectionFactory.getTuxedoConnection(TuxedoConnectionFactory.java:26)
at weblogic.wtc.tbridge.tBexec.jmsQ2tuxQ(tBexec.java:674)
at weblogic.wtc.tbridge.tBexec.run(tBexec.java:198)
<Nov 7, 2001 11:59:42 AM CST> <Debug> <WTC> <]tBexec<run/t#1: exited.>
<Nov 7, 2001 11:59:42 AM CST> <Debug> <WTC> <]/tBexec/10/>
<Nov 7, 2001 11:59:42 AM CST> <Info> <WebLogicServer> <weblogic.wtc.gwt.WTCStartup
reports: WTC started...>

Thanks Bob.
Best Regards.
Bob Finan <[email protected]> wrote:
Mauricio,
This looks like a tBridge random error that occured in the 1.0 version
of WTC
with WLS 6.0(WTC as a separate .jar file). A fix was made for this and
was
available when WTC was released with WLS 6.1(WTC fully integrated into
the weblogic.jar). The current release available is WLS 6.1 SP01.
Bob Finan
Mauricio Del Moral wrote:
TPESYSTEM(12):0:0:TPED_MINVAL(0):QMNONE(0):0:ERROR: getConnection canonly run
on a node where WTC has been configured

Random Error 'No Error'

Hi
We are Developing with VS2008 (Visual Basic) and are using the Crystal Reports 2008 SP 1 runtime.
Our Report Display Code works fine, most of the time, but somtimes we get random errors (System.Runtime.InteropServices.COMException (0x80000000): Kein Fehler (No Error).)
These OMExceptions ocure in different places, sometimes wenn we call 'CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk' or 'CrystalDecisions.CrystalReports.Engine.ReportDocument.Export'
these are rater easy to fix/hack, since we only need to catch then, and retry in order to successfully execute the command.
But there are other places this error occures witch we cann't catch, like when the user clicks on the Button for NextPage or Find.
Here an Stacktrace of this kind of error:
Exception: 'System.Runtime.InteropServices.COMException (0x80000000): Kein Fehler.
     bei CrystalDecisions.Windows.Forms.MainReportDocument.FindGroupFromEngine(FindGroupContext context)
     bei CrystalDecisions.Windows.Forms.ReportDocumentBase.FindGroup(TotallerNodeID nodeID)
Stack:
     bei System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
     bei System.Environment.get_StackTrace()
     bei ITS.Reports.frmShowReport.crv12_Error(Object source, ExceptionEventArgs e)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.FireHandleExceptionEvent(Object eventSource, ExceptionEventArgs ev)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
Maybe anyone knows how to fix this, or how an workaround ?

More Stacktraces:
Exception: 'System.Runtime.InteropServices.COMException (0x80000000): Kein Fehler.
     bei CrystalDecisions.Windows.Forms.ReportDocumentBase.GetPage(Int32 pageN)
     bei CrystalDecisions.Windows.Forms.DocumentControl.ShowNthPage(Int32 PageNumber)
     bei CrystalDecisions.Windows.Forms.DocumentControl.ShowNextPage()
     bei CrystalDecisions.Windows.Forms.PageView.ShowNextPage()
Stack:
    bei System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
     bei System.Environment.get_StackTrace()
     bei ITS.Reports.frmShowReport.crv12_Error(Object source, ExceptionEventArgs e)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.FireHandleExceptionEvent(Object eventSource, ExceptionEventArgs ev)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
     bei CrystalDecisions.Windows.Forms.PageView.ShowNextPage()
     bei CrystalDecisions.Windows.Forms.PageView.nextPageButton_Clicked(Object sender, EventArgs e)
     bei System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
     bei System.Windows.Forms.ToolStripButton.OnClick(EventArgs e)
     bei System.Windows.Forms.ToolStripItem.HandleClick(EventArgs e)
     bei System.Windows.Forms.ToolStripItem.HandleMouseUp(MouseEventArgs e)
     bei System.Windows.Forms.ToolStripItem.FireEventInteractive(EventArgs e, ToolStripItemEventType met)
     bei System.Windows.Forms.ToolStripItem.FireEvent(EventArgs e, ToolStripItemEventType met)
     bei System.Windows.Forms.ToolStrip.OnMouseUp(MouseEventArgs mea)
     bei System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
     bei System.Windows.Forms.Control.WndProc(Message& m)
     bei System.Windows.Forms.ScrollableControl.WndProc(Message& m)
     bei System.Windows.Forms.ToolStrip.WndProc(Message& m)
Exception: 'System.Runtime.InteropServices.COMException (0x80000000): Kein Fehler.
     bei CrystalDecisions.Windows.Forms.MainReportDocument.GetLastPageNumberFromEngine(ReportPageRequestContext context)
     bei CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
Stack:
     bei System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
     bei System.Environment.get_StackTrace()
     bei ITS.Reports.frmShowReport.crv12_Error(Object source, ExceptionEventArgs e)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.FireHandleExceptionEvent(Object eventSource, ExceptionEventArgs ev)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
     bei CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
     bei CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
     bei CrystalDecisions.Windows.Forms.DocumentControl.GetLastPageNumber()
     bei CrystalDecisions.Windows.Forms.PageView.GetLastPageNumber()
     bei ITS.Reports.itsCrystalReportViewer.GetLastPageNumber()
     bei ITS.Reports.itsCrystalReportViewer.PrintReport()
     bei ITS.Reports.itsCrystalReportViewer.PrintButton_Clicked(Object sender, EventArgs e)
     bei System.Windows.Forms.ToolStripItem.RaiseEvent(Object key, EventArgs e)
     bei System.Windows.Forms.ToolStripButton.OnClick(EventArgs e)
Exception: 'System.Runtime.InteropServices.COMException (0x80000000): Kein Fehler.
     bei CrystalDecisions.Windows.Forms.MainReportDocument.FindGroupFromEngine(FindGroupContext context)
     bei CrystalDecisions.Windows.Forms.ReportDocumentBase.FindGroup(TotallerNodeID nodeID)
Stack:
     bei System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
     bei System.Environment.get_StackTrace()
     bei ITS.Reports.frmShowReport.crv12_Error(Object source, ExceptionEventArgs e)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.FireHandleExceptionEvent(Object eventSource, ExceptionEventArgs ev)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
     bei CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
     bei CrystalDecisions.Windows.Forms.ReportDocumentBase.FindGroup(TotallerNodeID nodeID)
     bei CrystalDecisions.Windows.Forms.DocumentControl.FindGroupInReport(TotallerNodeID nodeID)
     bei CrystalDecisions.Windows.Forms.PageView.Navigate(TotallerNodeID nodeID)
     bei CrystalDecisions.Windows.Forms.PageView.OnGroupTreeNode_Clicked(Object sender, GroupTreeEvent e)
     bei CrystalDecisions.Windows.Forms.ReportGroupTree.FiredGroupTreeNodeClicked(TotallerTreeNode node)
     bei CrystalDecisions.Windows.Forms.ReportGroupTree.handleMouseDown(Object sender, MouseEventArgs e)
     bei System.Windows.Forms.Control.OnMouseDown(MouseEventArgs e)
     bei CrystalDecisions.Windows.Forms.TotallerTreeView.OnMouseDown(MouseEventArgs e)
     bei System.Windows.Forms.TreeView.WmMouseDown(Message& m, MouseButtons button, Int32 clicks)
     bei System.Windows.Forms.TreeView.WndProc(Message& m)
     bei System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
I will post more of them, once they ocure ...
Edited by: Alexander Wurzinger on Dec 5, 2008 12:16 PM

Random error notification that goes on then disappears in a millisecond

Just a random error that goes on every time i go on my computer and goes of in a millisecond.

Does the error have any wording?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

ODS activation process random error in process chain

Dear All,
In my process chains, the process of ODS activation is sometimes in error. It is a random error, it is not always the same ODS and process chain.
The message error is DBIF_RSQL_SQL_ERROR.
I noticed that, on right-clic -> Change variant to the process of ODS activation, I have the following message:
"Not all infoobjects can be read".
For information, in the processes of activation of the ODS, the unique parameter is the name of the ODS to be activated.
Thank you very much for your help,
Arnaud

Hi......
Check SAP Note : 631668......
According to this note :
Symptom
This note applies only to BW systems under ORACLE.
Loading data into InfoCubes terminates with an error: ORA 60, "deadlock detected". The monitor log displays the entry "CALLER 70 missing" and the request is flagged as red.
Other terms
Caller 70, DEADLOCK, ora0060, bitmap, indexes, DBIF_RSQL_SQL_ERROR
CX_SY_OPEN_SQL_DB
Reason and Prerequisites
In SAP BW, there are two fact tables for including transaction data for Basis InfoCubes: The F and the E fact table.
Unlike the E fact table, the F fact table contains the information about the request from where the transaction data originates.
Therefore, transaction data is always written to the F fact table and the package dimension contains the request to which the loaded data belongs.
Using 'Request compression', the system reads the data of a request from the F fact table and writes it to the E fact table without request ID and compresses.
For good reporting performance, you must keep only the data of a few requests in the F fact table since the F fact table is partitioned according to the key of the package dimension and the data of all requests is always read. Therefore, you should compress the request if you are sure that the loaded data is correct and that you no longer have to delete the request.
When you install BW on an ORACLE database, BITMAP indexes are created on the fact tables to improve the reporting performance of the system.
These have a negative effect on the performance when loading data and the deadlock mentioned above (ORA 60) may occur as a result. The DEADLOCKs occur during parallel insert operations because ORACLE does not support a blocking concept for BITMAP indexes at data record level.
Solution
Before loading movement data, delete secondary indexes from the F fact table and create them again after the loading process. If the F fact table is small, no performance problems occur.
Alternatively, you can also load requests serially into InfoCubes by first loading the data only into the Persistent Staging Area (PSA) and then serially into the InfoCube. If you use the data transfer process (DTP) for loading in BW 7.0, this option is no longer available.
NOTE
This avoids the deadlock problem. However, you should note that after some loading processes, it is necessary to reorganize the BITMAP indexes because they degenerate very heavily and, therefore, the read and writing performance deteriorates dramatically.
Hope this helps you.....
Thanks==Points as per SDN.........
Regards,
Debjani..........
Edited by: Debjani Mukherjee on Sep 29, 2008 3:14 PM

Random Error 2046

Similar Messages

Maybe you are looking for