Random file corruption with SSHFS, while CIFS is fine

I'm not sure what is happening, but it seems that sometimes, files read from a sshfs mount come up corrupted. I have checked my filesystem and my RAM for errors on both ends, everything comes up clean.
I'm currently mounting my shares as
fuse.sshfs noauto,x-systemd.automount,idmap=user,_netdev,identityfile=/home/azure/.ssh/id_rsa,allow_other,default_permissions,uid=1000,gid=1000,umask=0,reconnect,cache=yes,kernel_cache,ciphers=arcfour,compression=no 0 0
I tried copying several 300MB files, and different file(s) ends up partially corrupted. Checking the same file repeatedly does not make the checksum change as it usually happens with faulty RAM.
Only hint I have is that apparently it is always a block of exactly 2048 bytes that gets corrupted. It's filled with some data, so it's not getting "lost". My hunch is that either the encoding or decoding with arcfour is the culprit. Small files (~40mb) don't seem to be affected, else I'd get decoding errors/glitches on my music. Mounting the same share as cifs makes the problems disappear. Any ideas what might be causing this?

It just happened again. The file is fine on the other side, but I only see the "cached" state of it on my side. I will try removing "cache=yes" from the mount parameters, but if it's what causing it, then it's some shitty cache if it can't detect the file changed on the other side.
edit: setting "cache=no" seems to have cleared the cache and is showing the updated file content. The question now for me is, is that a bug in ssh, sshfs or dolphin?
Last edited by Soukyuu (2015-06-06 19:53:36)

Similar Messages

File corruption with a very large .ai file

A little background first:
I am a graphic designer/cartographer with 15+ years of experience. I started making maps in Illustrator with version 6 and have upgraded to every version since.
My machines:
2x Mac Pro 8-core 3.0GHz, 16GB RAM, 10.5.7
Mac Pro quad-core 2.66GHz, 8GB RAM, 10.5.7
MacBook Pro 2.0GHz, 2GB RAM, 10.5.7
Illustrator specs:
All machines have CS4 installed as well as Illustrator 10.
The 8-core MPs have the MAPublisher Plug-ins installed
The 4-core and MacBook Pro (MBP) does not have the MAPublisher Plug-ins
The problem I am having can be replicated on each of the machines. The MBP can't handle the file due to RAM. Since this occurs on machines that has MAPublisher installed and a machine that does not, I think we can rule out a plug-in issue.
File specs:
The original file: version 10, file size (uncompressed, no PDF support, and no font-embedding) is 36.4 MB. There are no raster effects or embedded/placed images. This is strictly a vector file. Artboard Dimensions: 85.288 in x 81.042 in
The original file, converted with CS4, and then saved as a CS4 file: file size (uncompressed, no PDF support, and no font-embedding) is 97.9 MB.
Brief Description of the problem:
I have tried to convert this file into every version of CS and it has failed every time. With each version, it has resulted in an unusable file for different reasons. CS-CS3, the file was completely unusable because of the opening/saving time. It could take as long as 3 hours to save the file. With CS4, this has been rectified and I once again tried to convert it. Upon re-opening of the 'converted' CS4 native file, the file is 'corrupted'.
The file corruption is not your regular "This file can't be opened because of: X" corruption. The file opens after a save/close just fine. It is just that parts of the file gets destroyed. To save space in this post, I have created a webpage that illustrates the problem that I am having:
http://newatlas.com/ai_problem/
I have tried everything possible to make the file smaller and it is as slimmed down as I can make it. (Using symbols, styles, etc.) I have also tried to eliminate this as a font problem by replacing every font with an Adobe supplied font, cleared caches, etc. This does not work, so I think we can rule out a font issue. I have also reduced this file to contain no pattern fills, no gradients, and just used simple fills and strokes. All to no avail. I have also tried piecing the file back together into a new document by copying/pasting a layer at a time. Saving, closing and re-opening after each paste cycle. I can get about 95% of it put back together and then it will manifest the problem. The only thing I haven't done is to convert all of the type to outlines. This would not solve my problem since this is a map that I continually work on year after year. I also can't remove objects or cut the overall area of the map because this file is used to produce an atlas book, a wall map and custom boundary wall maps. You can view the entire file at:
http://okc.cocpub.com
If I do not convert the legacy text, the file saves/closes/re-opens just fine. It just takes a very long time. So this leads me to think that the cause of the problem is the number of editable type objects that this file has. Ever since Adobe changed the Type Engine, I haven't been able to use this file in current versions of Illustrator.
If I could get this file to open, uncorrupted, I could finally get rid of Illustrator 10. Illustrator 10 does not have any problem with this file (and is still faster than CS4 in everything except selecting a lot of objects.)
I am posting this on the forums for any other opinions/ideas from the 'Illustrator Gurus' as a first step. I want to get in contact with someone at Adobe to see if we can address this problem and possibly get it fixed with CS5. I know that this is a user-to-user forum, but I'm not sure who, where and how to contact Adobe for this issue. Maybe someone on these forums can help with that as well.
Thank you for your patience for getting this far in my long post and I would really appreciate any response.
Dave

Thanks Wade for responding,
Did you try trashing your Adobe Illustrator CS4 Settings folder in your User's Preferences?
Yes, I've tried deleting prefs. Basically I've tried to rule out any problems with Illustrator as a whole. This issue has also occured on a clean install of OS X and Illustrator on a new User Account with the opening of this file being the first task that Illustrator has. There is no problem with Illustrator per se, but I think it is more of a limitation in Illustrator based on the number of type objects.
You could also try saving it out of 10 as a pdf or as postscript and distilling it then open that in ai or place it id a blank AI document.
Did you try to place instead of opening it?
I haven't tried any of these since the resulting file would be utterly unusable. Basically this would create a 'flat' file with 'broken' strings of text (type on a path especially) and type being uneditable. (Now that I think about it, CS4 does a much better job of opening pdfs without breaking type.) I still think this approach is not really a prudent course of action since, as of now, I can continue to maintain this map in Illy 10.
In my experimentation, the results are as follows:
1. Opening the file without updating the legacy type, saving the file as a new document, closing and then re-opening results in a file you would expect. Every object is where it is supposed to be. Downfall of this method: I absolutely need the type to be editable, especially the 'Street Type' since this type is actually used to create map indexes.
2. Opening the file with updating the legacy type, saving the file as a new document, closing and then re-opening results in a file that exhibits the exact behavior that has been posted in the thread-starter. This method results in the 'Bruce Gray' type being the duplicated item.
3. Opening the file without updating the legacy type, then splitting the file into layer groups and saving as separate files. Then opening the resulting CS4 files, updating the legacy type, copy & pasting (with layer structure) into a new document results in a usable file up to a point. I can get about 95% of it put back together and then the problem manifests. I have thought that it might be a "bad" object on one of the layers but I have ruled that out by: a.) All of the resulting sub-files (files that are portions of the larger) exhibit no problems at all. Usually our PS printers find issues that Illy does not and there is no problem in RIPing the sub-files. b.) If I change the paste order, meaning copying & pasting from the top-most layers to the bottom-most layers, vice-versa, and a completely random paste order, different objects (other than the 'Bruce Gray' type) will be duplicated. I've had one of my park screens, a zip code type object and a school district boundary be the duplicated object.
All of these experiments has lead me to believe that the Illustrator Type Engine is the main facilitor. I just don't think it can handle that many individual point type objects. I know CS4 can handle the number of objects, based on the fact that a legacy type (non-updated) file works.
I am almost entirely sure that Illustrator is working exactly as it is supposed to and that the vast majority of Illy users will never run into this issue. This file is by far the largest file that I work on. I would just like to be able to use an Intel native version of CS to continue maintaining this map.
On a side note: About three years ago, I tried working with this file in Freehand MX. Freehand initially would open the Illy file without a problem. I could work on it but when I would save it as a Freehand file, close it and re-open it, I would get your standard File Corruption. It would partially open, give me a corruption dialog, and open the file as a blank document. I alwa ys knew there was a reason to use Illustrator over Freehand for making maps.

Appleworks file corruption with Time Capsule

i've been working on multiple word processing files in appleworks the last couple of days when my time capsule begins to backup. every time i've had files open, they have been corrupted, and would not save. also, in my finder, i find these files labeled as huge strings of numbers and capital letters. i can open them and it's the last version i saved before the time capsule kicked in. (however, it's sort of like a ghost file - -i can see it, but i can't save any new information). now i'm paranoid and saving constantly, in case the time capsule pops up while i'm working! anyone else have this corrupt file problem with their time capsule? (we just got it, and we run leopard)

sorry.. i've been away for awhile..
no, i am talking about files which i have PREVIOUSLY created (say "dog.cwk") and have open, and am in the process of changing data when the time capsule clicks in. when the time capsule goes no while i am working in the file, two things happen. 1) i cannot resave the file, and must rename it to get it to save (so i will now have 2 files, dog.cwk and dog1.cwk) AND at the same time a file is automatically created that is named something like this:MAD321E581167430232-8119 (an actual file name that was created during one of these occurences). so i end up with 3 files: the original, the one i had to create to resave, and a third file that i don't know exists until i go into the hard drive to find out where my original went!
also, if i save again while the time capsule is on, i can save to dog1.cwk, but it might create another file called MAD321E581167430232-8119-1. i've only had this happen once, but it's still weird.
so, i am working on one file and i end up with 3 or 4.. and i can access and work in the original, but can't SAVE any changes.
now i find out it happens in my photoshop files as well - so it looks like a time capsule issue or a hard drive issue, rather than just a single software issue.

Kernel panics, graphic file corruption with Firewire

I've been having consistent problems with Firewire since I got my Mac Pro last year. I only recently narrowed it down to Firewire so I thought I'd write it up here for the record.
I never actually solved the problem, just started using USB-2 instead and the issues went away.
--I had been getting pretty consistent kernel panics while doing backups or large file transfers to an external FW drive. I tried a few different drives and cables and the panics were consistent.
--I also noticed a strange problem where graphic files I'd backed up (TIFF, JPEG, etc.) would have these single-pixel horizontal streaks running through them. This was a little disconcerting because it wasn't picked up during verification, it was just there when I opened the backup file.
I found lots of people with FW problems in these forums but none mentioned that strange file corruption I got.
I'll try FW again after a future system software upgrade but I'm giving up on it for now.

I've been having consistent problems with Firewire since I got my Mac Pro last year. I only recently narrowed it down to Firewire so I thought I'd write it up here for the record.
I never actually solved the problem, just started using USB-2 instead and the issues went away.
--I had been getting pretty consistent kernel panics while doing backups or large file transfers to an external FW drive. I tried a few different drives and cables and the panics were consistent.
--I also noticed a strange problem where graphic files I'd backed up (TIFF, JPEG, etc.) would have these single-pixel horizontal streaks running through them. This was a little disconcerting because it wasn't picked up during verification, it was just there when I opened the backup file.
I found lots of people with FW problems in these forums but none mentioned that strange file corruption I got.
I'll try FW again after a future system software upgrade but I'm giving up on it for now.

Sync File Corruption with 64-bit Vista/iTunes

I'm getting some file corruption problems when trying to sync my new 16GB iPhone with the latest 64-bit iTunes (7.6.0.29). "yes I have the 64-bit version".
The sync seems to go correctly, but I have yet to be able to play any videos all the way through. Videos purchased from iTunes as well as self encoded files. All said files were working on my 60GB iPod Video with previous versions of iTunes on the same 64-bit Vista machine.
The videos will start playing fine, but will eventually reach a point in the file that was corrupted during transfer, the audio will drop out and the video will distort, then it exits from the video as if it reached the end of the file. No error messages or anything. If I play the file again, it will do the same thing at the exact same spot, so its a problem in the file. Now, if I remove the file and add it back, the file still has the same problem, but in a different location, which means the source is fine, but the copy to the device during the sync is the issue.
To test, I synced the exact same content from my notebook which is 32-bit XP, and zero problems. So I'm currently just using my notebook for syncing at the moment.
Anyone else with 64-bit Vista have a similar issue?

Hello
I have a couple troubleshooting steps I would like you to try. I myself do not have a 64 bit Vista so I can not test this to confirm if the same issue occurs or not.
1. Attempt to Sync content using each of the USB Ports. See if all USB Ports pose the same issue with the video. Or if you found when where it does not occur.
2. Test on a new user on the Vista Machine. If possible take at least one or 2 movies and copy them onto a flash drive or something. And bring them into iTunes on a new user account. You may need to Authorize that user and De-authorize when your done. Does the same issue occur?
3. If you perform a reboot on the iPhone, Then Sync Data over. Does the same issue occur?
4. If possible could you restore the iPhone. Then Re-sync and see if same issue occurs.
5. Is this happening with all videos? or only certain ones? Does the corruption occur at the same time frame every time? If so is it the same time frame for all videos or slightly different?
6. Perform an Uninstall and Reinstall of iTunes on your system, See if same issue occurs.
Let us know how it goes.

Photoshop CS2 file corruption with Leopard 10.5.3

In addition to the network server corruption issue being experienced by everyone with CS3 and OS X 10.5.3, since Wednesday my CS2 version 9 Photoshop files are turned into corrupted, flattened Mexican rug files when I save to my own G5 pre-Intel hard drive. This is specifically happening when I save files to my hard drive and then shut down the computer minutes later. When I restart minutes later, the files saved just prior to shutdown are flattened and corrupted into a very colorful, horizontally banded Mexican rug. Which would be nice if I was designing Mexican rugs, but I'm not. Files saved during the day with no shutdown appear to be okay.
This has happened twice since Wednesday.
I also noticed that when I shut down since the Leopard 10.5.3 update, things won't shut down properly and hang. Can't figure out if this is Photoshop, iTunes (it wouldn't force quit), OS X, or a combination. So I have to shut down the power. Both times when I've done this, it resulted in corrupted files, even though their saves were completed prior to shutdown.
Does anyone know if this is an Apple thing or an Adobe thing? I wonder if this is one of the "issues for which there is no resolution" that Adobe says can happen using CS2 on Leopard.
Anybody have any solutions to this, other than going back to 10.5.2? I've been backing up multiple copies of files at different times of the day in different places. I don't know what else to do.
I have 2.5 GB of RAM, 96 GB of free disk space, NVIDIA GeForce 6800 Ultra DDL.

Wendell,
If your system is hanging upon shutdown, and files being saved immediately before shutdown are corrupted, then I'd say that the save process is not complete when you are shutting down. Otherwise it makes no sense, as your system does not know that you are going to shut down at that point.
Have you done system maintenance? And immediately before you upgraded to Mac OS X v10.5.x did you boot off the System disc and repair permissions and your drive? And did you boot off Alsoft's DiskWarrior and do the same? And then repeat the permissions repair immediately after the upgrade? Did you reinstall your apps from their original discs? If running maintenance now does not repair the issues AND if your system was behaving properly before, you may want to do an archive and restore to Mac OS X v10.4.11 until Apple has a further fix for Mac OS X v10.5.x.
Note that many of us who have pre-Intel machines that do not require Mac OS X v10.5.x have not upgraded -- Mac OS X v10.4.x is very stable. It is compatible with all CS3 apps (except as noted on the box by Adobe).
===
>Don't fob your customers off. This is HUGE BUG - I've paid for my software so fix it!
Carla,
I understand your frustration -- you are not alone. But, please post your questions or concerns just once. I've deleted your duplicate post.
Neil

Photoshop CS2 file corruption with Leopard 10.5.3 update

In addition to the network server corruption issue being experienced by everyone with CS3 and OS X 10.5.3, since Wednesday (and the 10.5.3 update) my CS2 version 9 Photoshop files are turned into corrupted, flattened Mexican rug files when I save to my own G5 pre-Intel hard drive. This is specifically happening when I save files to my hard drive and then shut down the computer minutes later. When I restart minutes later, the files saved just prior to shutdown are flattened and corrupted into a very colorful, horizontally banded Mexican rug. Which would be nice if I was designing Mexican rugs, but I'm not. Files saved during the day with no shutdown appear to be okay.
This has happened twice since Wednesday.
Please note that my Photoshop "save" is completed BEFORE I shut down, by several minutes.
Also, in both cases, an application was hanging and wouldn't force quit, which initiated my shutting down. First it was iTunes, then it was Mail. So I can't figure out if this is Photoshop, iTunes (it wouldn't force quit once), OS X, or a combination. But the only thing I can do is shut down the power.
Does anyone know if this is an Apple thing or an Adobe thing? I wonder if this is one of the "issues for which there is no resolution" that Adobe says can happen using CS2 on Leopard. Or part of the Leopard update. Or both cooperating together.
Anybody have any solutions to this, other than going back to 10.5.2 (or Tiger) ? I've been backing up multiple copies of files at different times of the day in different places. I don't know what else to do. Can't work much longer with corruption over my head. Leopard has been one long big headache.
I have 2.5 GB of RAM, 96 GB of free disk space, NVIDIA GeForce 6800 Ultra DDL.

The problem, as I see it, is; "which comes first - the chicken or the egg?" To explain, I am currently operating on an iMac G5, running OS X 10.3.9...... and I have Adobe Creative Suite 2 Preminum installed on my computer. Okay now my question..or rather questions (plural) are; #1 If I upgrade my operating system to OS X 10.4. (Tiger) is Adobe CS2 (Photoshop, Illustrator, InDesign, etc) compatible with OS X 10.4?
* Okay let's supposed the answer to #1 is; "yes - it's compatible.....CS2 will run fine on OS X 10.4
#2 Next question - Will Adobe CS2 run (without any problems) if I were to upgrade to OS X 10.5 (Leopard)? I believe, from what I have been reading the answer to this is; "No, Adobe CS2 is not compatible with Mac OS X 10.5". Okay let's say that I would then have to plunk the bucks and upgrade to Adobe CS3. On to the next and final question........
#3 Okay if I were to upgrade my OS to OS X 10.5 what do I upgrade first??? The operating system (which is not compatible with Adobe CS2 or the Adobe CS3 suite (which is not compatible with my present OS (OS 10.3.9)??? I have found nothing at either Adobe or Apple web sites which addresses this specific issue. I guess it's just like people - when your systems and software become outdated, the **** with you.
Like I said; Which comes first - the chicken or the egg?
PS: from what I have read on this thread it appears that people really don't read what someone is saying.....you (LoobyDooby) were taking about CS2 and suddenly everyone else stated taking about CS3. It's like tech support........you ask about "apples" and they tell you that "oranges" are not in season.......huh???
Message was edited by: Roger Beltz

File corruption with BT Infinity

I'm getting a problem with files coming through corrupt. If I download anything from my PC, Laptop or Xbox, the files come through corrupt. Normally I can get away with downloading something small or around 500mb(not all the time) but anything large, ie: 1GB or more the file will come through corrupt. I know this to be 100% now as i've tested with SHA-1 checksum.
If I download from my Xbox, such as a game which could be around 16-30GB's or watch Netflix the game file will apear to come through ok but when i go to play it, the game will tell me it's courrpt please try download again(or a message like this). If I watch Netflix, throughout the movie I get colourful glitches apear in the video and sometimes the film just stops when these happen.
If I download a large file on a laptop or PC, the file comes through corrupt. I know this because for example, If I were to download the Windows 10 tech preview right now it gives me a SHA-1 checksum. Once the file is downloaded, I can check the file with the SHA-1 and I get a different checksum and the file fails the test. If I were to go any further and burn the file to a DVD, put it in a spare PC the installation will fail with windows telling me files are missing or corrupt.
I can also see packet loss, not much as it's intermittent but if I leave a ping on to google for an hour or so, i'll get 1 or 2% packet loss when I stop the ping.
I have contacted BT a number of times now but never get anywhere but with them telling me I have a virus on my pc (even though I have done this with fresh OS PC's just to prove a point) or I get told I need to pay for some BT genius support which I know I don't need as I'm an IT Tech myself. They have however sent me out a few HH5's with no change in result. I know my equipment is not faulty as i've tested on friends and work's internet lines. I've also changed all my ethernet cables and dsl cable. I've even gone out and bought a Netgear VDSL router in hope that it's just the HH5 but no.. still happenes.
I would be confident to say the issue is between the NTE (MK2) on my wall to their routers beyond my house but I can't get anyone to listen to me when I call. They just tell me they can't see any issues, but ofcourse they can't as they arn't downloading anything large...
Does anyone have numbers for maybe a deptment in BT which could help and that are from the UK?
This issue has gone on over a year now and I'd like to get it sorted once and for all. My speed is not a problem.

Ping statistics for 216.58.210.14:
Packets: Sent = 3083, Received = 3034, Lost = 49 (1% loss),
Approximate round trip times in milli-seconds:
Minimum = 8ms, Maximum = 1031ms, Average = 18ms
This is from a ping which was left during the 15 mins it took me to write the above message.

File corruption on SDCard when multiple files are being written from WinCE 6.0R3

We currently have file corruption problems which we have been able to reproduce on our system which uses WinCE 6.0R3. We have an SDCard in our system which is mounted as the root FS. When multiple files are being written to the file system we occasionally
see file corruption with data destined from one file, ending up in another file, or in another location in the same file. We have already written test SW that we have been able to use to reproduce the problem, and have worked with the SDCard vendor to
check that the memory controller on the card is not the source of the problems.
We know that the data we send to WriteFile() is correct, and that the data which eventually gets sent through the SDCard driver to the SD card is already corrupted.
We believe that the problem is somewhere in the microsoft private sources between the high level filesystem API calls and the low level device calls that get the data onto the HW.
We have confirmed that the cards that get corrupted are all good and this is not a case ofpoor quality flash memory in the cards. The same cards that fail under WinCE 6.0R3 never fail under the same types of testing on Windows, Mac OX, or linux. We
can hammer the cards with single files writes over and over, but as soon as multiple threads are writing multiple files it is only a matter of time before a corruption occurs.
One of the big problems is that we are using the sqlcompact DB for storing some data and this DB uses a cache which get's flushed on it's own schedule. Often the DB gets corrupted because other files are being written when the DB decides to flush.
So we can reproduce the error (with enough time), and we know that data into the windows CE stack of code is good, but it comes out to the SDcard driver corrupted. We have tried to minimize writes to the file system, but so far we have not found a
way to make sure only one file can be written at once. Is there a setting or an API call that we can make to force the OS into only allowing one file write at a time, or a way of seeing how the multiple files are managed in the private sources?
Thanks
Peter

All QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue.

I Tunes will not play play back files ripped with Handbrake on 10.6.8 Server

I have hundreds of files ripped with Handbrake that play back fine on my Mac Mini and iMacs and Macbooks connected to a server running 10.6.8 (the files are stored on the server). However, when I try to play the files with iTunes on the server machine itself, I hear volume but get a blank screen. The problem seems limited to mv4 files ripped with Handbrake, as my MOV files will play fine on the server.
Any ideas? I tried loading Perian (latest version) on the server machine but it did not fix the problem. Same blank screen.
Just to add, movies download from iTunes (M4V type) have the same issue - blank playback on the server. Only the MOV file plays. All of these files will play when Quicktime is used as a player, just not with iTunes.

My approach to this problem has been to start by setting up the new os x 10.10 servers and just two os x 10.10 clients. I've plodded through setting up the server1 and client 1 and then checking that server2 replicates correctly and client 2 can be deployed and managed via DeployStudio and Profile Manager. At the moment I am using client 2 for my own day to day work to ensure I spot snags before the students do.
Once I happy with the microcosm I've created, it's a matter of syncing /Users on the old and new servers with rsync and telling DeployStudio that the hundred or so clients that are currently running 10.6.8 and are binding to 10.6.8 servers need to be re-imaged with the workflow that client 2 is currently using. (Actually I'll probably do one client per subnet first before hitting the 'Make it so!' switch.)
The most laborious part of the migration for me has been recasting MCX preferences set with Workgroup Manager as 'profiles'. I have never been happy with automated migration for servers. Setting up a server is not particularly difficult and you end up with a clean and documented installation that you understand fully that uses current methods and no legacy settings or obsolete hacks.
I've no idea whether this is the most efficient or best method, but it feels safe to me; even after deployment, until I shutdown my beloved Xserves for the last time I'll be able to roll the whole system back to 10.6.8 within a couple of hours if something goes wrong.
C.

Solved my problem - random files dropped or corrupt in transfer process

Ok, problem for me similar to some others I've seen so I'll post it here: sporadic NEF files transferred with Bridge CS4 are unreadable about 1 in 20. Looking at the problem file itself, it's size is 0 bytes like the transfer process made the file, but didn't put the data into it. NEF's are still fine on the camera or cardreader. I have isolated this problem to Bridge only on the following computer while transferring JPEGs or NEFs from different cameras, cards, readers. Sometimes I'll also get random filenames with no extension as well. CaptureNX2 and explorer "drag and drop" work fine.
Windows XP 64bit
4GB RAM
2xHD RAID 0
3.0 GHz AMD
Bottom line, after a lot of experimenting, I could lessen the amount of errors that bridge made by turning down my processor. Going with that, I isolated some BIOS features and found the "cool and quiet" feature (which changes the CPU multiplier based on system load) as the problem. Now, with that feature disabled I can get 100% transfers with the system running at full speed. I would say by reading many of these threads that there are similar features on a lot of newer AMD and Intel systems that seem to not play very well with Bridge.
I know not exactly the same problem you may have, but maybe some insight to a larger issue with that function in Bridge/ACR/LightRoom
Best - Bennett

Hello and welcome to the Forums.
DBFixit by Pimlico software can be a god send at times trying to find and fix corrupt data. Although by Palms standards it is considered 3rd party software we cannot support it, but let me tell you we recommend it all the time to our customers with data issues. It is designed to work on Palm OS's and does a great job. I'm glad it worked out for you.

Transaction log shipping restore with standby failed: log file corrupted

Restore transaction log failed and I get this error: for only 04 no of database in same SQL server, renaming are working fine.
Date
9/10/2014 6:09:27 AM
Log
Job History (LSRestore_DATA_TPSSYS)
Step ID
1
Server
DATADR
Job Name
LSRestore_DATA_TPSSYS
Step Name
Log shipping restore log job step.
Duration
00:00:03
Sql Severity        0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted
0
Message
2014-09-10 06:09:30.37 *** Error: Could not apply log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' to secondary database 'TPSSYS'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: An error occurred while processing the log for database 'TPSSYS'.
If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
An error occurred during recovery, preventing the database 'TPSSYS' (13:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
RESTORE LOG is terminating abnormally.
Processed 0 pages for database 'TPSSYS', file 'TPSSYS' on file 1.
Processed 1 pages for database 'TPSSYS', file 'TPSSYS_log' on file 1.(.Net SqlClient Data Provider) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 Skipping log backup file '\\10.227.32.27\LsSecondery\TPSSYS\TPSSYS_20140910003724.trn' for secondary database 'TPSSYS' because the file could not be verified.
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: An error occurred restoring the database access mode.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteScalar requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 Deleting old log backup files. Primary Database: 'TPSSYS'
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 The restore operation completed with errors. Secondary ID: 'dd25135a-24dd-4642-83d2-424f29e9e04c'
2014-09-10 06:09:30.37 *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.37 *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-10 06:09:30.37 *** Error: ExecuteNonQuery requires an open and available Connection. The connection's current state is closed.(System.Data) ***
2014-09-10 06:09:30.38 ----- END OF TRANSACTION LOG RESTORE
Exit Status: 1 (Error)

I Have restore the database to new server and check with new log shipping but its give this same error again, If it is network issue i believe issue need to occur on every database in that server with log shipping configuration
error :
Message
2014-09-12 10:50:03.18   *** Error: Could not apply log backup file 'E:\LsSecondery\EAPDAT\EAPDAT_20140912051511.trn' to secondary database 'EAPDAT'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-09-12 10:50:03.18   *** Error: An error occurred while processing the log for database 'EAPDAT'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
An error occurred during recovery, preventing the database 'EAPDAT' (8:0) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support.
RESTORE LOG is terminating abnormally.
can this happened due to data base or log file corruption, if so how can i check on that to verify the issue
Its not necessary if the issue is with network it would happen every day IMO it basically happens when load on network is high and you transfer log file which is big in size.
As per message database engine was not able to restore log backup and said that you must rebuild log because it did not find out log to be consistent. From here it seems log corruption.
Is it the same log file you restored ? if that is the case since log file was corrupt it would ofcourse give error on wehatever server you restore.
Can you try creating logshipping on new server by taking fresh full and log backup and see if you get issue there as well. I would also say you to raise case with Microsoft and let them tell what is root cause to this problem
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

RAW files look corrupted with color streaking during import

During import in Lightroom about 25% of my files look corrupted (with color streaks, etc.). The RAW images upload perfectly in iPhoto on the same computer but for some reason will become corrupted in Lightroom. I am able to delete the corrupted images in the LR Library and reload them with about a 50% success rate. I've tried different memory cards, cf importers, etc. Only an issue in LR. Sometimes they export with the streaking and other times they export perfectly fine. Even if they export fine it makes it impossible to edit in LR. Below is an example of how the image appears. Any answers?

Raw files have a camera-embedded JPG.
I would guess the files are corrupt, LR is showing you this corruption, while other programs are only interpreting the JPG and hiding the corruption.
Can you upload one of these photos that iPhoto shows as ok, while LR shows corruption? Upload one to www.dropbox.com <http://www.dropbox.com> and post a public download link, here.

N79: "File Corrupted" error while installing .sis/...

Hi:
I have been using Nokia N79 since Dec 15, 2008. I am facing problem while installing software with .sis/.sisx extension [for example fringe, putty and so many different softwares]. Everytime it's showing "File Corrupted" error, even if I download the software from Nokia Authorized sites. Please note My Application Manager settings are as follows: Software Installation: All, Online Certification Check: Off, Deafault Web Address: Nil. Installing files with other extensions [except .sis/.sisx] are ok with me.
Please help me in this regard, as it's becoming really painful for me day by day.
My System details:
Nokia N79
Software Version: 10.046
Date: 07-10-2008
Custom Version: 10.046.53.1
Date: 07-10-2008
Type: RM-348
Thanking you.
regards,
Shaheen

if you download things from sites like mosh etc, those files sometimes do get corrupted. it is best if you actually try to download them from the source and the ones that you can install via pc, install via pc maybe that will make a difference for you. you can go to fring site and fring will send you a text message, now once you open the link this app should download without any problems. and yes your are right it is highly unlikely that it is a hardware issues. try that and report back.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Macbook air mid 2013, I erased my HD and while downloading the OS screen went of and when I switched back on I get a file icon with a question mark.

I erased my HD and while downloading a new screen went of.When I switched on again there was a file icon with a question mark

restart holding down command+r, you'll be able to reinstall your OS here

Random file corruption with SSHFS, while CIFS is fine

Similar Messages

Maybe you are looking for