Randomly Records are missing from R/3 to BW

Hi all,
I have a Employee Cube, which maintains Daily time sheet (Empid, workingday, Working Hours etc..) of each employee.
For Employee Cube, deltas are running daily basis. In R/3 side all data is available.
Problem is I missed randomly some data records for each employee from R/3 to BW.
I did some full loads , put selection conditions (Empid =009223, calday=04092005) , it loads missed data successfully for that date .
To laod like this for each employee it is very much painful.
Why (0cats_is_1)standard R/3 extractor not picking up all data? What is the solution for this? Advise me.
Please help me. It is little bit urgent.
Warm Regards
Sri.

Hi Sri,
Update mode "C" is to check the data for the Initialization of the delta.
Update mode "D" is to check the data for delta since last request.
Update mode "R" is to check the data for repeat of the last delta.
This mode must no longer be supported by the extractor under the following conditions:
1. The system has an R/3 Release >= 4.0B
2. The extractor is completely roll back-capable within an extraction process, meaning that no database-commit takes place in the extractor.
Update mode "S" is for Simulate the initialization of the delta.If an extractor is called in this mode, it is not permitted to deliver any data. Its only job is to make sure that for this request, the delta mode ('D') is possible for any following requests.
Example The extractor uses a time stamp stored in an administration table to determine the delta. In the delta mode, only those records that have been changed or generated since the last extraction are actually transferred. In mode 'S', the current time stamp is included in the administration table, but no data is transferred into BW.
Hope this helps.
Bye
Dinesh

Similar Messages

Random songs are missing from iTunes folders from CD's I converted.

The dreaded exclamation point has shown up on a number of random songs that were converted from my music CD's and are completely gone from my hard drive, including the iTunes folder. The titles and descriptions are there, just not the music. Even stranger, after I've reloaded the affected files back into iTunes, the same songs keep disappearing over time. It's maddening, any idea what's going on?

It has always been very basic to alway maintain a backup copy of your computer for this very occasion.
Have you failed to do this?

Data Records are missing in between while loading from R/3 (ECC) to BI.

Dear Experts,
I have created a custom DataSource on Custom Function Module. This datasource contains 600 fields. (I know its a monster and splitting options are thinner).
1) Validate the data using RSA3 in R/3 and showed the correct record count.
2) Validate the data by debugging the FM, still showed the correct record count.
But while loading from R/3 to BI, records are missing.
Various Scenarios load from R/3 to BI:
1a) Loaded full load (78000 records) with all default data transfer settings. PSA showed up with 72000 records (missing 6000) only. Compared the Idocs vs data packets, both reconciled.
1b) Loaded full load (78000) with modified settings (15000 KB / data packet). PSA showed up with 74000 records (missing 4000) only.
2a) Loaded with selection parameters (took a small chunk) (7000 records) with default data transfer settings. PSA showed up only 5000 records (missing 2000).
2b) Loaded with selection parameters (7000 records) with modified settings (15000 KB / data packet). PSA showed up all 7000 records.
3a) Loaded with selection parameters (took further small chunk) (4000 records). PSA showed up all records regardless data transfer settings.
Also please look at this piece of code from the function module,
IF l_wa_interface-isource = 'ZBI_ARD_TRANS'.
l_package_size = l_wa_interface-maxsize DIV 60.
ENDIF.
I really appreciate your advise or help in this regard.
Thanks much,
Anil

Hi,
Which module u want?
if its SD(for example)
steps>>
1>In AWB goto "business content"
2> goto "Info provider"
3>Under infoarea select SD cubes
4> Drag related cubes and ODS to right panel
5> Set the grouping option "In Data flow before&afterwards"
6>Install the collected objects
Go to R/3
7> Use Tcode RSA5 Transfer all regarding SD module datasources
Goto BW
8> Right click on the source system "Replicate datasources"
[DataSources|http://help.sap.com/saphelp_nw70/helpdata/en/3c/7b88408bc0bb4de10000000a1550b0/frameset.htm]
Edited by: Obily on Jul 10, 2008 8:36 AM

Few records are missing while downloading to a Spreadsheet from a Report

Dear Gurus,
few records are missing while downloading to a Spread sheet from a Z report. There are around 300 records, out of which 11 records are not appearing in Spreadsheet file after saving. But, the funny thing is when i try to save in other format like, HTML or to a clip board all records are coming.
When asked, the ABAPer said -
your report is coming correctly. if the report is wrong then we can try checking some code in the Z report. Saving it into Spread sheet is the standard program provided by SAP.
He is also facing this problem for the first time.
Can anybody help.
Thanks in advance and u will get points if useful.
Regards

Hi,
Few days back we got this kind of error, when i tried to down load the asset balances in excel format.
It was observed that, for one of the asset description ends with cama",". Due to this reason all other details has been stored in single cell. Once we changed the master data of that asset, then we able to get the report properly.
2) Some other time, when we tried to download material master details, for one of the material ... description not maintained. this is another issue. After maintain the description problem got resolved.
Hope this information will be helpful to u.

Random Records are being skipped while uploading data in PSA from CSV File

Hi Experts,
I am facing issue in data uploading in PSA through CSV file, Random Records are being skipped while uploading data in PSA.
First Load
We have flat file (.txt in CSV format), which contains 380240 Records.
We are uploading the flat file data into PSA from Application Server. But it uploads Only 380235 records, 5 Records are being skipped.
Second Load
We have re-generated same file next day, which contains same No of Records (380240), but this time it uploads Only 380233 records, 7 Records are being skipped.
We found 1 skipped record (based on key columns combination, by cross verifying from source and PSA table) from First load. But same records (combination of key column) is available in second load. It means same records are not being skipped every time.
Earlier (5 months ago) , We have loaded 641190 Records from flat file in same PSA and all records (641190) were uploaded successfully.
There is no change is Source, PSA and flat file structure.
Thanks & Regards
Bijendra

Hi Bijendra,
Please check in the file if at the begining if it has got any excape sign then that record may be skipped so the records may be mssing
Please check the excape sign like ; if they are present at the beginign that recor entirely will be skipped.
Regards
vamsi

Records are Missing when we run Delta Load( FIGL-ACCOUNT ITEMS)

Hi,
Some records are missing when we run Delta load.
We have one generic data source on FAGLFLEXA table.
We select Field nm TIMESTAMP
TIME STAMP IS LOCAL.
upper limit is Blank
Lower limit is 1000.
we run this process chain every day.
we select delta settings is New status for changed records.
Please give me any idea why records are missing when we run deltas.
Thanks
Naik

Hi Anju,
Please ensure that you are following the below steps while Initilizing the application 13:
1. All the users in source system, must be locked.
2. Ensure that SMQ1 and RSA7 are having no data for application 13. Delete the application 13 datasource entries from RSA7.
3. Delete and refill the setup tables for application 13.
4. Run a INIT with data transfer load for the required datasources of application 13.
5. The Deltas can follow from the next day.
This will ensure that your deltas are fetching correct data. Note that, delta will pick up the same conditions on which the INIT load was run.
Please let me know if you need any more information.
Regards,
Pankaj

Iphone 4 wont sync to itunes anymore. Itunes opens then a message comes up saying I need to restore it. I want to avoid doing this as I've noticed some of my purchases since updating itunes are missing from computer but they are on my phone.

I have reset my phone, put the latest updates on itunes and iphone and thought it might work then, but no luck. I am trying to avoid restoring it as I dont want to loose the data I have purchased that is missing off my itunes since I updated that. I'm not sure how to contact itunes to get my data put back on my itunes on computer. All my purcahsed data from itunes still comes up on my phone as it hasnt been able to sync to the update. DOes anyone know how to contact itunes to have bought data re-put back on. It comes up in my itunes acocount with the date and purchase number but these items are missing from my itunes purcahsed items. Weird?
I am on an imac. Is there anyway I can get around the issue of syncing again or should I just restore once I have contacted itunes about them deleting my paid for items! I feel very ripped off, its like buyoing something from target and having the manager come to your house and retrieve it! lol

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

HT1209 My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

My Itunes Library and iPhone have fallen out of sync on music over the yearsare - how can I compare my itunes library with my Iphone to see what songs are missing from my library so I can then bring my Library up to date

Hello Solid Buck,
Thank you so much for providing the details about the duplicate song issue you are experiencing. It sounds like you would like to remove the duplicate songs that will not play on your iPhone, but when you connect it to iTunes, iTunes only shows you one copy of the song on your iPhone.
In this situation, I recommend deleting the individual songs that do not play directly from your iPhone. I found the steps to do this on page 61 of the iPhone User Guide (http://manuals.info.apple.com/en_US/iphone_user_guide.pdf):
Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
Thank you for using Apple Support Communities.
Best,
Sheila M.

When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library - but two are missing from the folder.

When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!

Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

PS CS4 64-bit (in Web Premium CS4) on Win 7 PC. I did a duplicate file check on my hdd and deleted dup files. Now I get "Some of the application components are missing from the Application directory, Please reinstall.."

PS CS4 64-bit (in Web Premium CS4) on Win 7 PC. I did a duplicate file check on my hdd and deleted dup files. Now when I try to run PS 64-bit I get "Some of the application components are missing from the Application directory, Please reinstall the application." When I do this, it seems to install correctly until the very end, then it says "Installation Complete With Errors", and when I try to run I get the same 'component missing message'. What can I do? PS 32 bit runs fine. Some of the other applications ib Web Premium say the shortcut has been changed or removed. I appreciate your help...Thank you

Best advice I can think of is to uninstall and run the Clean Script from here.
Adobe - Adobe CS4 Clean Script

"File" and "View" are missing from the ribbon in Excel, MS Office 2011, please help!

"File" and "View" are missing from the ribbon in Excel, I'm running MS Office 2010. Please help!

Post your question on the MS Mac forums as it's their software you're having issues with: http://answers.microsoft.com/en-us/mac?auth=1

My catalogues and tags are missing from my Organizer in Photoshop Elements 10? What is going on?

My catalogues and tags are missing from my Organizer in Elements 10. What is going on?

Thank you for the advice. I have a PC and the catalogs were for the most part where you said they would be, on the C drive under Program Data\Adobe\Elements Organizer\Catalogs. The last six months folder as well as a cruise I took in 2012 is missing but the rest seems to be there. Now I seem to have two Organizers-the one I just found and the one I created with my March 2013 trip pictures. How do I put them together and find them when I click on the Photoshop elements Organizer icon? You mentioned “pointing “ PSE to it in the default mode? How do I do that?
TS

Sent emails are missing from Thunderbird following migration from alternative email client and import of emails

All sent emails are missing from the Thunderbird 'Sent' folder following import, but Sent folder still shows a count of the imported emails (Thunderbird considered them to be unread when importing them, hence the count). The messages are also visible online (BT Internet email) and on other devices (Android running BlueMail). Settings are set to place copies of sent items into Sent folder. Having imported all my old email, I can send email but again they do not appear in the Sent folder (but do appear online and on other devices). I have tried compacting the Sent folder and i have tried repairing the folder. All other folders (Inbox, other newly created folders) show the email i have imported.
If I move an email online from the Sent folder to another test folder, it syncs and appears in Thunderbird in that test folder. If I then use Thunderbird to move the email back from that test folder to the Sent folder then Thunderbird will do so, but locks up for a good minute or so while doing that.
Running TB 24.6.0 on Windows 8.1, incoming server set to IMAP on mail.btinternet.com (port 993), outgoing server set to SMTP on mail.btinternet.com (port 465).
Help gratefully received!

Cheers for that, Mulder.
It did seem to recover some emails which had disappeared from Mail, but not all of them. That's the frustrating thing - short of going through my Yahoo webmail accounts and logging every single email, and then cross-referencing with what's on my desktop, I just can't be sure what's there and what's not!
Sometimes it's immediately clear that something is awry - the folder I use for emails from my girlfriend is completely empty, for instance, when I definitely had things in there before the weekend. (Yes, again I went away for the weekend, with the computer still running - and Mail on - and again I returned to discover emails missing.
Arrgh!

File icons are missing from my ML desktop. Name is there but the icon is missing. How do I fix this?

Some of my file icons are missing from the Mountain Lion desktop. The file name is there but not the icon. The file can be opened when the words are double clicked. The files show up properly in Adobe Bridge. These are Photoshop files. How do I fix the problem?

Get Info (cmd-i) on one of these files. In the "Open with" tab is PS selected?
If that's so it may be some corruption LaunchServices.These are only cache files but can get corrupted.
Launch /Utilities/Terminal and copy & paste this at the command line to rebuild LaunchServices:
(EDIT: Be sure to copy the entire line of code it is a slider)
Code:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
Then press return. Wait until terminal returns to the command line. Quit Terminal. After that, log out and back in or restart. Let us know

Randomly Records are missing from R/3 to BW

Similar Messages

Maybe you are looking for