Range error while opening a transaction

Hi ABAPers,
I am getting a error called Range error(892, $FVALS, u, n) when I open my tranaction.
Coule anyone tell me reason and solution for this?
Thanks and Regards,
Ramesh.

What transaction, custom transaction? Report prgoram? Please post your code.
Regards,
RIch Heilman

Similar Messages

Runtime Error while opening the transaction ME22N

Hi,
when am trying to open the transaction ME22Nin Ecc6.0 its showing the runtime error like Assign with Length 0 in the pgm SAPLTAX1 in the Module FIND_TAX_SPREADSHEET.
than you in advance.

post your Dump information with
Short text
What happened?

Getting error while opening transactions in a perticular queue

Hi All,
we had been experiencing this error for some days now. When we try to open any transactions in this queue we end up getting the below error:
"Access denied.
You may not have access to perform this task on the chosen person
or your session has timed out. (Try to log into the system again.)
I have complte access to this - so that should be an issue. When i try to open a transaction it is long time to process and then i end up with this error.
I heard in other post to minimise the search attributes for this and i did the same but it worked for some time and then again i am getting the same error.
Please suggest how to get rid of this. This is right now happening only to one single queue.

Hi,
According to your post, my understanding is that you got the error while opening a document in SharePoint library.
The issue can occur when you have several different versions of Office installed on the same computer and you have
several different versions of the OWSSUPP DLL available which are not registered correctly.
To resolve this issue you should disable Microsoft SharePoint Foundation Support in any other version of Office installed on the machine and then repair Office.
For more information: you can refer to:
You get an error message when you open an Office file from SharePoint on a computer on which you installed more than one version of Office
In addition, please ensure that you are using Internet Explorer (32 bit) not the Internet Explorer (64-bit).
Please Verify the “Sharepoint OpenDocuments Class” addon is installed and enabled. If it is not reinstall Office.
Please refer to:
Solved: The document could not be opened for editing. A Microsoft SharePoint Foundation compatible application could not be found to edit the document.
And, if the Office tools can’t install correctly will also cause the error.
Here is a thread about this issue, you can check it. The replies include most of the possible reasons and gave the solutions.
http://social.msdn.microsoft.com/Forums/en-US/06a4943a-5150-44c5-ae6b-3354c85396f5/the-document-could-not-be-opened-for-editing-a-microsoft-sharepoint-foundation-compatible
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error while opening the receipt entry form in AR module.

Error while opening the receipt entry form in AR module. We have created one new responsibility of Receivables for new operating unit . When we open the corresponding
forms , we are getting the error message as :
NO_DATA_FOUND
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-20002.
Kindly help in resolving.
We have ERP version of 11.5.10.2

Please also see the following docs.
Transactions Workbench Error: Listing of ORA Errors [ID 1336495.1]
FRM-40735 ERROR OPENING LIFE EVENT REASONS FORM BENLEVRS [ID 1517593.1]
APP-AR-96996: The Defined Sales Representatives Have Incorrect Id'S [ID 437107.1]
ARXSUDRC Receipt Classes Errors With APP-AR-96994: Please Define Sales Representatives [ID 357454.1]
Thanks,
Hussein

Error Message "Error while Opening the Document"

Hi Friends,
I have a problem while opening the SFP transaction and Clicking on the Layout Tab the SAP System is giving an error message saying "Error while Opening the Document".
I have tried testing on several systems like IDES, ERP, Retail systems. But it is giving me same error. Is this the problem with ADOBE LIVECYCLE DESIGNER?
And when I click on the Performance Assistant it has given me some information:
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Friends can you help me in solving this problem.
Thanking yoy in Advance
Pradeep Goli

Pradeep,
Maybe Live Cycle Designer has not been uninstalled correctly from your system. So goto the following lcaotions and remove the Designer folder if you find them:-
C:\Program Files\Adobe
C:\Documents and Settings\<your-username>\Application Data\Adobe\
Alternatively try installing Live Cycle Designer on some other machine in your network and see if you encounter the same error.
Similar thread for reference : Error - Adobe Live Cycle designer
Chintan

After Downloading, Error while opening PDF : PDF has no pages

After Downloading, Error while opening PDF : PDF has no pages
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
    EXPORTING
      SRC_SPOOLID              = L_SPOOLNO
      NO_DIALOG                = SPACE
      DST_DEVICE               = MSTR_PRINT_PARMS-PDEST
    IMPORTING
      PDF_BYTECOUNT            = MI_BYTECOUNT
    TABLES
      PDF                      = MTAB_PDF
    EXCEPTIONS
      ERR_NO_ABAP_SPOOLJOB     = 1
      ERR_NO_SPOOLJOB          = 2
      ERR_NO_PERMISSION        = 3
      ERR_CONV_NOT_POSSIBLE    = 4
      ERR_BAD_DESTDEVICE       = 5
      USER_CANCELLED           = 6
      ERR_SPOOLERROR           = 7
      ERR_TEMSEERROR           = 8
      ERR_BTCJOB_OPEN_FAILED   = 9
Thanks in advance
Monika
      ERR_BTCJOB_SUBMIT_FAILED = 10
      ERR_BTCJOB_CLOSE_FAILED = 11
      OTHERS                   = 12.
Transfer the 132-long strings to 255-long strings
LOOP AT MTAB_PDF.
TRANSLATE MTAB_PDF USING '~'.
CONCATENATE WA_BUFFER MTAB_PDF INTO WA_BUFFER.
ENDLOOP.
TRANSLATE WA_BUFFER USING '~'.
DO.
it_attach = WA_BUFFER.
APPEND it_attach.
SHIFT WA_BUFFER LEFT BY 255 PLACES.
IF WA_BUFFER IS INITIAL.
EXIT.
ENDIF.
ENDDO.
****GET THE FILE NAME TO STORE....................
v_path = 'C:\PD Form\' .
CONCATENATE v_path p_pernr-low '.pdf' into v_name.
    create object v_guiobj.
    call method v_guiobj->file_save_dialog
      EXPORTING
        default_extension = 'pdf'
        default_file_name = v_name
        file_filter       = v_filter
      CHANGING
        filename          = v_name
        path              = v_path
        fullpath          = v_fullpath
        user_action       = v_uact.
    if v_uact = v_guiobj->action_cancel.
      leave to current transaction.
    endif.
..................................DOWNLOAD AS FILE....................
    move v_fullpath to v_filename.
    call function 'GUI_DOWNLOAD'
      EXPORTING
        bin_filesize            = MI_BYTECOUNT
        filename                = v_filename
        filetype                = 'BIN'
      TABLES
        data_tab                = it_ATTACH
      EXCEPTIONS
        file_write_error        = 1
        no_batch                = 2
        gui_refuse_filetransfer = 3
        invalid_type            = 4
        no_authority            = 5
        unknown_error           = 6
        header_not_allowed      = 7
        separator_not_allowed   = 8
        filesize_not_allowed    = 9
        header_too_long         = 10
        dp_error_create         = 11
        dp_error_send           = 12
        dp_error_write          = 13
        unknown_dp_error        = 14
        access_denied           = 15
        dp_out_of_memory        = 16
        disk_full               = 17
        dp_timeout              = 18
        file_not_found          = 19
        dataprovider_exception = 20
        control_flush_error     = 21
        others                  = 22.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.

My Generated Spool request is PDF Spool. It contains Adobe Forms data. To Download Adobe form
             Spool (PDF Spool) into PDF format,
First,
A)     Read PDF Spool data by using u2018FPCOMP_CREATE_PDF_FROM_SPOOLu2019 Function module.
B)     Assign the Output Data to XSTRING format
C)     Convert that XSTRING data to Binary Format using 'SCMS_XSTRING_TO_BINARY' Function module.
D)     Save File on Application server using OPEN DATASET , TRANSFER , CLOSE DATASET.You can see your
                      downloaded file in Transaction AL11 in specified directory.
You can save your file on Presentation server also using GUI_DOWNLOAD.
First three steps are necessary if your spool is PDF Spool.
Basically we need this when we are downloading Adodbe forms ( which is not a SAPScript or smartforms)
Example :
DATA :
e_pdf1 TYPE fpcontent,
e_renderpagecount1 TYPE i.
CALL FUNCTION 'FPCOMP_CREATE_PDF_FROM_SPOOL'
    EXPORTING
      i_spoolid               = l_spoolno
      i_partnum               = '1'
   IMPORTING
     e_pdf                   = e_pdf1
     e_renderpagecount       = e_renderpagecount1
*   E_PDF_FILE              = E_PDF_FILE1
* EXCEPTIONS
*   ADS_ERROR               = 1
*   USAGE_ERROR             = 2
*   SYSTEM_ERROR            = 3
*   INTERNAL_ERROR          = 4
*   OTHERS                  = 5
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA : buffer TYPE xstring,
append_to_table TYPE c.
DATA : output_length TYPE i.
TYPES : BEGIN OF ty_binary,
            binary_field(1000) TYPE c,
          END OF ty_binary.
DATA : lt_binary TYPE TABLE OF ty_binary WITH HEADER LINE.
DATA : lv_xstring TYPE xstring.
lv_xstring = e_pdf1.
* Convert xstring to binary.
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      buffer                = lv_xstring
     append_to_table       = ' '
* IMPORTING
*   OUTPUT_LENGTH         =
    TABLES
      binary_tab            = lt_binary.
DATA : wa_binary LIKE lt_binary.
DATA: BEGIN OF itab OCCURS 0,
field(256),
END OF itab.
DATA: dsn(50000) VALUE '/usr/sap/tmp/',
length LIKE sy-tabix,
lengthn LIKE sy-tabix.
CONCATENATE '/usr/sap/tmp/' lv_pernr '.pdf' INTO dsn.
******* Save file on Application server
OPEN DATASET dsn FOR OUTPUT IN BINARY MODE.
LOOP AT lt_binary.
    TRANSFER lt_binary-binary_field TO dsn.
ENDLOOP.
CLOSE DATASET dsn.
CLEAR lt_binary.
REFRESH lt_binary.
cheers

Error while opening a report in FRstudio client machine.

Hi,I'm getting below error while opening a report in FRstudio client machine. please help me if any of you resolved this issue earlier.
client laptop: 64bit windows7
hyperion version: 11.1.2.2
error msg:
"HARSnapin Initialize() Error -2147467259 - ; nested exception is:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.InvalidClassException: com.hyperion.reporting.graphics.GridObject; local class incompatible: stream classdesc serialVersionUID = 5432192847655595077, local class serialVersionUID = -5245705824007679661"
thanks

I've seen umarshalling error when there is a difference between the client and server version. Is there a patch applied? I would recommend to uninstall the existing one and install if from Workspace. (this will ensure that you've the correct client version)
Regards
Celvin
http://www.orahyplabs.com

Error while opening a Data base view

Iam getting error while opening a database view saying view is not maintained at the database level.
what i should do

If the object is not "Active" in SE11, then activate it.
If the object is "Active" in SE11, then go to SE14, and enter the name of the view and click "Edit". On the next screen, I would assume that it says something like, "Does NOT exist in the database". If that is the case, you could probably click the "Create Database View" button near the bottom of the screen. This will then create the view at the DB level. You should always have to do this, sometimes things have problems when creating the object in SE11, and you have to do the SE14.
Regards,
Rich Heilman

Error while opening a datafile in dataprep editor

Hi
Error while opening a datafile in dataprep editor
"opening the datafile failed see the message panel for details"
"server.com.DEV.Perf Read data file September 17, 2009 8:31:51 AM EDT Failed : 1030001"
can anyone help me through this error..
right i am trying to load data by creating a rules file..but could not open the file in dataprep editor..
Thanks,
Ram

In some cases restarting the EAS service has fixed this error for me.

Error while comitting a transaction in oSB. The following is the error stack

Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
        java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
        java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
        at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
        at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
        at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
        at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
        at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
        at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
        at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
        at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
        at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
        at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
        at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
        at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Error while opening .PDF files in document library sharepoint 2013

Hi
I am getting an error while opening a .pdf file,
Please help me find the solution.
Thanks
Paru

Launch IE -> Click on Gear (settings) -> Manage Add-ons -> Show: All Add-ons ->
There are 2 Adobe Add-ons:
Adobe PDF Reader & Adobe Acrobat Sharepoint Open Document
Double-click both and be sure to click the button "ALLOW ON ALL SITES"
(An * will appear in the field)
http://crowdsupport.telstra.com.au/t5/T-Suite-Applications/There-was-an-error-opening-this-document-The-filename-directory/td-p/197425
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/ae2eea40-9fa6-46be-bca1-ac5eb5597d5e/sharepoint-2010-adobe-reader-error-opening-pdf-files?forum=sharepointgeneralprevious
http://community.office365.com/en-us/f/154/t/46204.aspx?PageIndex=2
disable the Mcafee Firewall Plug In. This is after of course I ran superantispyware to remove some malware. uninstalled and reinstalled the Adobe Reade
https://forums.adobe.com/message/1776202?tstart=0

Request timed out.- Error while opening a item in Blog

Hi,
   We have a blog in our share point portal which was running properly before few days.
We get Request Timed out error while opening an item in the blog. The list contains about
   3500 items
[HttpException (0x80004005): Request timed out.]
We were able to create a new item but not able to view the item.
When we check the server SQLSERVR.EXE takes more than 90% of the CPU Usage.
Please let me know how to resolve this issue.
Thanks,
Vanitha

Hi,
According to your description, Please check the RAM allocated to your SQL server. MOSS server needs 2GB RAM
to preform well. SQL requires 2GB RAM for optimum performance.
Messages like this are mainly due to lack of RAM Allocation.
Best Regards
David Hu

Error 500--Internal Server Error while opening a taskflow in inline popup

Hi,
I am getting "Error 500--Internal Server Error" while opening a bounded taskflow as a popup from another bounded taskflow containing page fragments. The popup taskflow contains jspx pages. I even removed the jspx pages from the popup taskflow to check if the error is resulting from the bindings on the pages but still I get the same error. The entire stack trace of the error in the popup dialog is :
Error 500--Internal Server Error
oracle.adf.controller.ControllerException: ADFC-04008: The BindingContext on the session is null.
     at oracle.adfinternal.controller.util.Utils.createAndLogControllerException(Utils.java:208)
     at oracle.adfinternal.controller.util.model.AdfmUtil.getBindingContext(AdfmUtil.java:47)
     at oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
     at oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:1006)
     at oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:159)
     at oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:900)
     at oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:355)
     at oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:105)
     at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:551)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:100)
     at oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:147)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
     at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:59)
     at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:258)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:177)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:97)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any help is greatly appreciated.
Thanks,
KK

Hi Frank,
Thanks for the reply. I am using it as an inline popup. I am trying to create command links dynamically in an iterator. When a link is clicked a popup window opens. The text of the link is passed to the popup window by creating a variable in the session scope ( I even tried request scope) by an action listener in the backing bean.
I tried to create another simple application with a static command button which passes its text to popup window through a session scope variable. It worked fine. I am not sure why the same procedure is not working in my original application. Can you give me a hint what could possibly go wrong according the exception stack trace ?
Thanks,
KK

APEX 4.0: error while opening a XLS file downloaded from interactive report

Hi,
I'm getting below error while opening a XLS file downloaded from an interactive report (APEX 4.0).
"The file you trying to open, 'customer_2.xls', is in a different format than specified by the file extension.
Verify that the is not corrupted and is from a trusted source before opening file. Do you want to open file."
Yes No Help
May be this one Apex 4.0 issue.
please help me.
Thanks
Mukesh

Hi,
is the next part of the code correct.
What i mean is packing of the attachment, finding out the size of pdf file and doc type as PDF.
You can also try below link..
Link: [http://wiki.sdn.sap.com/wiki/display/Snippets/SENDALVGRIDASPDFATTACHMENTTOSAPINBOXUSINGCLASSES]
Hope this helps.
Regards,
-Sandeep

Getting error while opening Excel document from SharePoint site

Hello All,
I am getting following error while opening Excel document from SharePoint site.
This issue appears when we open Excel document from Windows>> Run using below mentioned command:
Excel.exe "{File Name}"
If once I go to Excel back stage and browse for the SharePoint location, then this problem disappears.
I have a work around for this issue but main problem is that i do not have any work around when i need to open Exel document using Excel COM interop in C#.
Thanks,
Amit Bansal
Amit Bansal http://www.oops4you.blogspot.com/

Hi Amit Bansal,
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issues involve Excel application.
According to the description, you got an error when you open the document form SharePoint site.
Based on my understanding, this issue maybe relative to the SharePoint, I would like move it to
SharePoint 2013 - General Discussions and Questions forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
Thanks for your understanding.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Range error while opening a transaction

Similar Messages

Maybe you are looking for