Error while comitting a transaction in oSB. The following is the error stack
Error while comitting a transaction in OSB. The following is the error stack
<Apr 20, 2015 12:00:15 AM MDT> <Error> <EJB> <BEA-010026> <Exception occurred during commit of transaction Xid=BEA1-1AE41F1CAE45F2B146FD(296700848),Status=Rolled back. [Reason=Unknown],numRepliesOwedMe=0,numRepliesOwedOthers=0,seconds since begin=2,seconds left=120,XAServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(ServerResourceInfo[WLStore_SOA_PRDKS_DOMAIN_FileStore_SOA_MS2]=(state=new,assigned=none),xar=null,re-Registered = false),XAServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(ServerResourceInfo[WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1]=(state=rolledback,assigned=OSB_MS1),xar=WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_11603460297,re-Registered = false),XAServerResourceInfo[weblogic.jdbc.jta.DataSource]=(ServerResourceInfo[weblogic.jdbc.jta.DataSource]=(state=ended,assigned=none),xar=CMSDS,re-Registered = false),SCInfo[OSB_PRDKS_DOMAIN+OSB_MS1]=(state=rolledback),SCInfo[SOA_PRDKS_DOMAIN+SOA_MS2]=(state=pre-prepared),properties=({}),local properties=({weblogic.jdbc.jta.CMSDS=[ No XAConnection is attached to this TxInfo ]}),OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=OSB_MS1+soaprd-vip-osb-ms1.cos.is.keysight.com:8001+OSB_PRDKS_DOMAIN+t3+, XAResources={eis/wls/Queue, WEDB_EVEREST_OSB_PRDKS_DOMAIN, XREFDS_OSB_PRDKS_DOMAIN, eis/activemq/Queue, CustomSchemaDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS1_OSB_PRDKS_DOMAIN, eis/tibjmsDirect/Queue, eis/jbossmq/Queue, eis/Apps/Apps, MobileApps_AOS_MDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_DRDS_OSB_PRDKS_DOMAIN, WSATGatewayRM_OSB_MS1_OSB_PRDKS_DOMAIN, eis/webspheremq/Queue, eis/AQ/aqSample, SBLPROD_OSB_PRDKS_DOMAIN, wlsbjmsrpDataSource_OSB_PRDKS_DOMAIN, eis/aqjms/Queue, CMSDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_WseeFileStore_auto_1, FAP_OSB_PRDKS_DOMAIN, eis/sunmq/Queue, eis/pramati/Queue, FMWAPPDS_OSB_PRDKS_DOMAIN, weblogic.jdbc.jta.DataSource, GSDC_OSB_PRDKS_DOMAIN, eis/tibjms/Topic, eis/fioranomq/Topic, WLStore_OSB_PRDKS_DOMAIN_FileStore_MS1, PresidioOracleAppsDS_OSB_PRDKS_DOMAIN, GSDCDS_OSB_PRDKS_DOMAIN, eis/aqjms/Topic, CustOutDS_OSB_PRDKS_DOMAIN, OFMW/Logging/BAM, MobileAppsDS_OSB_PRDKS_DOMAIN, FIDDS_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN__WLS_OSB_MS1, HRMSDS_OSB_PRDKS_DOMAIN, WEDB_OSB_PRDKS_DOMAIN, OracleAppsDS_OSB_PRDKS_DOMAIN, eis/wls/Topic, eis/tibjms/Queue, eis/tibjmsDirect/Topic, IntrastatDS_OSB_PRDKS_DOMAIN, MobileApps_AOS_COSDS_OSB_PRDKS_DOMAIN, MobileApps_CIA_DS2_OSB_PRDKS_DOMAIN, EVEREST_WEDB_OSB_PRDKS_DOMAIN, WLStore_OSB_PRDKS_DOMAIN_FileStore_auto_1, Everest_OSB_PRDKS_DOMAIN},NonXAResources={})],CoordinatorURL=SOA_MS2+soaprd-vip-soa-ms2.cos.is.keysight.com:8002+SOA_PRDKS_DOMAIN+t3+): javax.transaction.SystemException: Lost connection to server while commit was in progress, ignoring because initiating server is not coordinating server. Remote Exception received=weblogic.rjvm.PeerGoneException: ; nested exception is:
java.rmi.UnmarshalException: Incoming message header or abbreviation processing failed ; nested exception is:
java.io.InvalidClassException: oracle.jdbc.xa.OracleXAException; local class incompatible: stream classdesc serialVersionUID = -2542408691177300269, local class serialVersionUID = -4551795881821760665
at weblogic.transaction.internal.TransactionImpl.commit(TransactionImpl.java:376)
at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(ServerTransactionImpl.java:237)
at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTransactionImpl.java:224)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:552)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:423)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:325)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay
Similar Messages
-
OSB: Cannot acquire data source error while using JCA DBAdapter in OSB
Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PMHi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
</default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
<connection-properties>
<properties>
<property>
<name>xADataSourceName</name>
<value>jdbc/SOADataSource</value>
</property>
<property>
<name>dataSourceName</name>
<value></value>
</property>
<property>
<name>platformClassName</name>
<value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
</property>
</properties>
</connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -
Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
Hello All,
I am facing the following error while running a loadtest (when i choose the scenario to be executed for No of test iterations). But the same loadtest with the Run duration for X minutes is running fine without any issues.
Any suggestions on the issue i am facing
error is :
could not read result repository: unknown transaction id in results:
or
could not read result repository: unknown request id in results:
Thanks
SatishHi Kotapati,
>>Subject: VSTS loadtest error while running Loadtest with Runsettings as No of test iterations , ERROR is : could not read result repository: unknown transaction
id in results:
According to your description, you mean that when you run your load test using the Test Iterations way and then get the error message, am I right?
If yes, please you try to close the VS, and then open this VS again. Then clean your load test project/solution and then re-build it, run your load test again check this issue again.
In addition, I suggest you could try to create a new load test and then run it using Test Iterations way check if you get the issue for the specified load test or all load tests.
If possible, I suggest you could share me simple load test for us so that we will further help you.
You could upload your load test to OneDrive and then copy link here.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error while posting FB50 transaction code
Hi I am getting the below error while doing FB50 transaction code. Please help me
My company code is using EUR & country is Greece
Company code not assigned to country or country to calculation procedure
Message no. FF703
Diagnosis
An error occurred when checking the tax code. Either the assignment of company code and country or of country and calculation procedure is not correct.
Procedure
Check the system settings.
To do this, choose Maintain entries (F5).
If the program error occurred
In a standard SAP program, then create an OSS message
In a program you wrote yourself, then correct the program.
Thanks
KishoreHi
Go to OBBG -->Assign Country to Calculation Procedure and assign the Tax procedure( ie like TAXIN) to the GREECE Country.
This helps you resolve your issue.
Regards
Venkat -
Error while posting tresury transaction
hi gurus,
i got the error , while excuting treasury transaction:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '1000' has currency type '10'. This currency type has the currency key 'SAR' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'EUR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '1000' must have currency key 'EUR' when the data is transmitted.)
Kinldy help to resolve this issue.Hi All,
I am facing the same issue..Can U pls help me in resolving the error.
ERROR:
Inconsistent currency information
Message no. F5725
Diagnosis
Company code '6242' has currency type '10'. This currency type has the currency key 'SGD' in the financial accounting application.
The same currency type is conveyed to financial accounting across the accounting interface with currency key 'INR'
System Response
Currency data conveyed with this key cannot be processed in the financial accounting module.
Procedure
This is a system error in the calling application.
Currency type '10' in company code '6242' must have currency key 'INR' when the data is transmitted.
Regards,
Venkat -
While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?
This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.
-
i can't send an e-mail from thunderbird, it was working well though , suddenly it says the following message:An error occurred while sending mail. The mail server responded An error occurred while sending mail. The mail server responded: (Alis-MacBook-Air.local) [46.138.187.135]:51054 is currently not permitted
OR
i have changed the port from 587 to 465 but still cannot send e-mail, it keep sending and sending for 5 minutes and respond is time out?Can you post your Troubleshooting Information?
Help (Alt-H) - Troubleshooting Information -
Hi,
I'm using SQL Server 2008R2 Reporting Services.
When i click on Web Services URL link it throws the below error.
"Report Server has encountered a SharePoint error. (rsSharePointError) Get Online Help
The system cannot find the path specified. (Exception from HRESULT: 0x80070003)"
and in the Event viewer i can see the below error for reporting services.
"Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015)."
Any help would be greatly appreciated.Related thread has a solution:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/e97b0c14-c428-4b83-b5a2-dc58eb6be258/ssrs-2008-failed-to-unload-app-domain-defaultdomain-exception-from-hresult-0x80131015?forum=sqlreportingservices
Kalman Toth Database & OLAP Architect
Free T-SQL Scripts
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
What can I do after receiving the following message: "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later".
I have received this message the last 3 days, is itune radio down or am I the only one experiencing this type of problem?
Need help.
Thanks
Sam3Ok.. Apparently it's not just me
Apple needs to make a statement or something on this issue. I'm running Lion OS X 10.7.3 -
Hello,
I currently having a series of errors (18 issues) that are occurring under the below Correlation ID ad1a22f5-1ddb-4fa5-8487-143cb6fd0f9d
I have listed (3) that are in the Web Parts category, this error/issue is causing several timed job to no longer work properly I have been trying to find the root cause for about a week now. If anyone has encountered a issue
such as this one I'm open for suggestions.
(1)
Error while executing web part: System.Xml.Xsl.XslLoadException: XSLT compile error. An error occurred at (1,475). ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest
asyncRequest, Exception exception) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult
lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[]
buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception
stack trace --- at System.Net.HttpWebRequest.GetResponse() at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials) at System.Xml.XmlUrlResolver.GetEntity(Uri
absoluteUri, String role, Type ofObjectToReturn) at Microsoft.SharePoint.WebPartPages.WSSXmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn) at System.Xml.Xsl.Xslt.XsltLoader.CreateReader(Uri
uri, XmlResolver xmlResolver) at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(Uri uri, Boolean include) at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(XmlReader reader, Boolean include)
--- End of inner exception stack trace --- at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(XmlReader reader, Boolean include) at System.Xml.Xsl.Xslt.XsltLoader.Load(Compiler compiler, Object stylesheet, XmlResolver
xmlResolver) at System.Xml.Xsl.Xslt.Compiler.Compile(Object stylesheet, XmlResolver xmlResolver, QilExpression& qil) at System.Xml.Xsl.XslCompiledTransform.CompileXsltToQil(Object stylesheet, XsltSettings
settings, XmlResolver stylesheetResolver) at System.Xml.Xsl.XslCompiledTransform.LoadInternal(Object stylesheet, XsltSettings settings, XmlResolver stylesheetResolver) at System.Xml.Xsl.XslCompiledTransform.Load(XmlReader
stylesheet, XsltSettings settings, XmlResolver stylesheetResolver) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.LoadXslCompiledTransform(WSSXmlUrlResolver someXmlResolver) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXslCompiledTransform()
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)
(2)
InnerException 1: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according
to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean
receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback,
Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[]
buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetResponse()
at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials) at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn) at Microsoft.SharePoint.WebPartPages.WSSXmlUrlResolver.GetEntity(Uri
absoluteUri, String role, Type ofObjectToReturn) at System.Xml.Xsl.Xslt.XsltLoader.CreateReader(Uri uri, XmlResolver xmlResolver) at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(Uri uri, Boolean include)
at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(XmlReader reader, Boolean include)
(3)
InnerException 2: System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest
asyncRequest, Exception exception) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult
lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[]
buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async)Hello,
It seems that issue is related to certificate. Could you please upload certificate to central admin and make it trust.
Just try this and see the result:
http://social.technet.microsoft.com/Forums/en-US/cbc58585-1673-4c91-b8c1-1b95c339bbb7/could-not-establish-trust-relationship-for-the-ssltls-secure-channel?forum=fastsharepoint
http://social.msdn.microsoft.com/Forums/en-US/7a7e56ba-6e95-4a84-9384-791818cce89d/the-underlying-connection-was-closed-could-not-establish-trust-relationship-for-the-ssltls-secure?forum=sharepointdevelopmentprevious
http://www.infotext.com/help/sharepoint-could-not-estabilish-trust-relationship-for-the-ssltls-secure-channel-when-crawling-ssl-enabled-websites/
If still face the issue then tell us more about your webparts and also confirm if you are facing same problem to other page and site.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
No matter how I try to finalize an imovie I get the following message:
"The project could not be prepared for publishing because an error occurred. (Error code = -49)"Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W -
Installation Failure: Windows failed to install the following update with error 0x800F0922
Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil -
Windows failed to install the following update with error 0x80070005
Hi,
We are using Win Server 2008 R2 std. Server and Win 7 Professional X64 clients. During the second batch of update we got an Error while updating on one client machine and the system restoring back automatically However other clients are updating and working
fine. Then i tried to install the updates one by one manually then successfully installed all the updates except one ie. KB2862330. It keeps failing then i found an article suggest to check the update with Admin Previlage, disable Antivirus and Scan the
computer for Malware (Using MS Security Scanner and Malwarebytes). I tried both but never works. After that i got 2 batch of updates, everything is updating and trying to update this (KB2862330) and failing till date. What is the issue and why its not updating
on one machine?
Installation Failure: Windows failed to install the following update with error 0x80070005: Security Update for Windows 7 for x64-based Systems (KB2862330).
KB Article Followed : http://support.microsoft.com/kb/968003/en-usOkay, good. The SURT shows no errors.
So now we can blame the problem exclusively on the update itself.
And yes... there are still known, ongoing issues with KB2862330.
Truly, my suggestion is to just not install it at all. Unless you've identified a known risk via a USB vector on particular systems where the vulnerability would be considered a critical risk, I'd say that the risk caused by the vulnerability is significantly
less than the risk of additional headache caused by the update itself. I have still not deployed MS13-081 to any of my systems, and frankly, I don't plan to.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.
Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check. -
Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support
Maybe you are looking for
-
How do i transfer a project to a cd for further mastering?
i know this is a simple question but how do i transfer a project to a cd or dvd-r for further mastering?also i am thinking about getting a macbook and am wondering how i would transfer my work in logic 8 on the imac to a brand new macbook?
-
Query Tuning - using CASE statement in the WHERE clause
Hi All, My query has been modified to use a CASE statement in the WHERE clause to consider data from certain columns based on a parameter value. This modified query is doing a full table scan and running endlessly. Please suggest what may be done to
-
Is It POSSIBLE to change the Technical Name of Z-version Query
Hi Friends , I was changed all quereis and cube from standard version to Z version. For queries, by using rszc , i was changed to Zversion,Now again is it possible to change the Technical Name of Zversion Query ? If possible , can you please tell me
-
Duplicated styles when opening Word document: Heading 1 A, Heading 1 AA,etc
I'm trying to get rid of Word and all the Windows in my office. But when I import a Word document into Pages, it will duplicate the Styles. Heading 1 becomes Heading 1 AND Heading 1 A. If I happen to export the Pages document to Word and back to Page
-
Copy a Group in ACS 4.2 ??
I see no way to copy a group in ACS 4.2. Am I missing something? thanks Bob