RAR Organizational Rules not showing/working on RAR 5.3_13.3

Hello Guys,
We are facing some problems during RAR Organizational Rules implementation. After creating our risk matrix (along with all functions) we start refining it with Org. Rules, accordingly to our company needs.
Unfortunatelly, after doing some tests, we found out that all created organizational rules are not working. They simply do not show on our reports (Risk Analysis > Organizational Level section). Any advice on that? I already went through the "How-To Guides" and a few SAP Notes (987031) without succeed.
As a business example, we have the need of certifying that a critical access (already mapped in a Critical Action Risk Type) is not a False Positive, checking also the organizational level for that specific activity (Company Code values) so, we are doing the following:
1) In a given Auth. Obj, we are activating BUKRS field, with $BUKRS value;
2) Created an Organization Rules. (e.g Org. Rule Company01 with BUKRS = COMP, and tagged RISK ID RK01*)
3) Re-generate/Update all risk rules
4) Ran Organizational User Mapping Job
5) Executed an Risk Analysis (Risk Analysis > Organizational Level section).
The results of report are the same as a regular risk analysis. No Organizational Rule were found in our result (in Org. Rule Description columm) but just all users with ANY risk.
Besides , the Org. Rule report ran the Risk analysis for ALL RISKS of our Matrix, not only for those mapped in our Org. Rule (RK01). Is this working properly? The organizational report should not only run a report for previously mapped risks ??? (in our business example, an report result with only users with Critical Access risk RK01 and with any Auth Obj with BUKRS Field value COMP!?)
Can anyone help us on the error above?
Thank you,
Best Regards,
Adam

Hi Natasha,
Reviewed the situation and suggest a work around. Just try whether the same is working or not.
As mentioned the roles are assigned to HR positions of the users and not to user ids. In that case in RAR under configuration tab go to 'user mappings' where you can map user id with the organisation position for the respective users in the particular system.
I suggest you can test it for one user and if works fine you can replicate for other users.
regards,
Jwalant

Similar Messages

Elements 5 - Organizer will not show thumbnails

Recently moved Elements 5 to my new laptop - On the laptop the organizer will not show photos in any view other than single picture. Anything smaller shows the hour glass [also shows on the collections icons]. I deleated the first catalog transfer and have been only using new photos transfered from my D-50. It will run full screen shows just nothing smaller that a single picture view. I also uninstalled and reinstalled the Elements software.
I have unchecked the filer checker.
Systems is a Vista home premium 64 bit, 4 gig of ram, Lenovo ideapad laptop 5800T processor. Version 5.0.2
Any ideas?
Alan

I can't be sure this is the problem, but ...
Is this the first time you have opened PSE5 on this computer? If so, it truly is generating the thumbnails. Your statement about how in single image mode the thumbnail appears is a symptom of this phase of the operation. Just let it run. It will finish, and the problem will be gone.

Content Viewer for Desktop not showing/working

Hi,
After updating the DPS Desktop Tools for CS6 (2.04.1) on windows for my Creative Cloud CS6, the Content Viewer isn't working anymore: pressing the preview button open the preview popup loading progress bar (which I guess prepare all the files), disapear when the process is done, then nothing.
My only way to preview my modifications is to update the downment in the folio, then downloading the udpate on my iPad (no direct preview on iPad, I'm on windows).. and it's not reallyproductive!
I tried to find the application itself to launch it manually, with no luck.. and also, to see if it's not a firewall issue (I'm using windows default one, and using Avast for the virus protection).
Thank you for your help

Thanks, but still not all people in a team will have an ipad, but all work on a computer. The problem is settled anyway with the download of the Viewer that exists for both Mac and Windows.
Diane
Le 2012-10-11 à 07:41, Totyo a écrit :
Re: Content Viewer for Desktop not showing/working
created by Totyo in Digital Publishing Suite - View the full discussion
I confirm this last message from Bob. quick tests are good on the desktop viewer, but it doesn't reflect what can be your folio on a device.
just too bad that you can't preview on the iPad on Windows...
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4766104#4766104
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4766104#4766104
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4766104#4766104. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Digital Publishing Suite by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Organizer will not show any pictures in My Catalog

I am a brand-new user to PSE. I have PSE 9 running on my iMac.
I tried to use the Organizer to import my photos from my SD card. It copied the photos just fine and put up the popup box saying that it was going to import the photos in My Catalog and did I want it to show only new files. I said yes. My Catalog is not showing ANY photos! I have tried optimizing and repairing the catalog. I tried reconnecting missing files and it says there are no missing files. I set it to View All Files.
I'm really at a loss here!

OK Problem SOLVED!
First, I reinstalled the software.
Secondly, I downloaded and installed the Camera Raw Plugin which will import NEF files.
Mac - http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Macintosh
Windows - http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows
Everything seems to be working just fine now.

Sharepoint2013 - Organizational browser not showing anything

Hi there.
Sharepoint 2013 installed. Tried the Organizational Browser web part, but it does not shows anything neither in Silverlight view or in HTML view. What exactly should this "feature" show?
It's the same in IE on WIN8 and WIN7 client (both with latest silverlight).
bostjanc

Hi,
Sharepoint 2013 uses claim authentication by default and adding the "clientaccesspolicy.xml" to iis root is
not working for claim authentication.
Keep the xml file and add this javascript code to the page in content editor webpart:
<script type="text/javascript">
function CreateHierarchyChartControl(parentId, profileId, type, persistControlId) {
var i = profileId.indexOf("|");
var claimsmode = profileId.substr(i-1,1);
if((i >=0 ) & (claimsmode=="w"))
profileId = profileId.substr(i+1,profileId.length-i-1);
var initParam = profileId + ',' + type + ',' + persistControlId;
var host = document.getElementById(parentId);
host.setAttribute('width', '100%');
host.setAttribute('height', '100%');
Silverlight.createObject('/_layouts/ClientBin/hierarchychart.xap',
host,
'ProfileBrowserSilverlightControl',
width: '100%',
height: '100%',
version: '2.0',
isWindowless: 'true',
enableHtmlAccess: 'true'
onLoad: OnHierarchyChartLoaded
initParam,
null);
</script>For more info check this link:http://support.microsoft.com/kb/2643420

Organizer does not show filename and extension viewing photo

Windows 7
Photoshop Elements 8
I previously had Photoshop Elements 8 on a computer with Windows XP that died. My photos, thankfully, were on an external hard drive. My new computer has Windows 7. I installed Photoshop Elements 8 on it and imported my photos.
Previously when viewing a photo in Organizer in the largest size obtainable by clicking on the thumbnail, the photo would show tags and the filename with extension. Now, It does not show the filename and I have to click properties and get the little window that opens to show me the name. I couldn't find anything in preferences to set the filename option. Can someone please tell me how to do it?
Thanks, Eva

Hi,
Under the View menu, ensure that Details & Show file names are both checked
Brian

New inbox rule not showing up in Outlook 2007 client

I have made a rule for testing with the Exchange Management Shell. The rule worked. My problem lies in that the end-users have Outlook 2007 for the client software but the rule I create isn't visible (though it is working). The end-user needs to be able
to switch the rule on and off still. The rule does show up in the Outlook Web App however. I can't figure out why the rule isn't list in the Outlook 2007 client. Any ideas on how to fix this?

Hi AMartin89,
Thank you for your question.
Did you rebuild profile to check if the issue persist?
Did the issue occur on all users?
Could you post command which you create Inbox rule on PS?
What is you outlook version? We could update outlook to latest version to check if the issue persist.
We could configure profile on outlook 2010 to check if the issue persist.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Business rule not showing the result

When i am executing a business rule, it runs successfully but it does not show any result. But when i enter any amount in that specific cell where the BR should calculate the amount and then run the BR then it shows me the required result. What can be the reason for that?
We are on 11.1.2
and im making BRs through Calc Manager (Wizard Based)
Edited by: ar_aff on Mar 24, 2011 9:56 PM

I think that's about Block problem (value of a cell). The BR can't open block automatically. In BR sorce usually used a command Set Createnonmissngblk on before calculating value;

Panel interface horizontal ruler not showing in code

Hi I have just reinstalled Dreamweaver cs5 onto a new computer (pc), I have opened up an existing web page I am currently working on, only to find the horizontal ruler at the bottom of the code box is no longer showing as it was on the other computer, because my lines where long it was handy to scroll horizontally to keep my code tidy, the vertical ruler appears.
Cheers

The namespaces is displayed in black.
I'm using http://sap.com/xi/WS for the namespaces. Is it a problems?
Hi,
If you look under the document (Shift + F1) in SPROXY, click on Generation Tips.
It says,
If a SWCV that has been created in the SLD is not visible in the navigation tree in transaction SPROXY, note the following:
SAP components (Vendor = 'sap.com'):
The navigation tree only displays the software component versions that are installed in this system (see table CVERS, or choose System -> Status... and then the Component information pushbutton).
Non-SAP components (Vendor is not 'sap.com'):
All components are displayed.
You need to rename your namespace i guess.

BRF+ Routing Rule not showing Expression

Hi Experts,
I am trying to create a BRF+ routing rule (line item by line item) within SAP Standard Process ID - SAP_GRAC_ACCESS_REQUEST
The purpose is to use it as a detour based upon Role attributes. Although the rule is generated in ABAP screen, when I try to modify BRF+ rule, the Expression where decision table is located, not coming up.
When I test it, it gives error - Expression not set.
What could be the issue? Need your help.
Thanks & Regards,
Sabita

Hi Sabita,
Definitely look up those courses! I'm an instructor for them in the UK and these sorts of questions are exactly those which most people ask on the courses!
GRFN_MW_S_ROUTING is a structure which contains those two fields. This should be the Result Data Object which will then automatically place those two fields as the results.
The Condition columns are user driven inputs where you give the criteria for the routing rules e.g. Business process or role criticality etc.
For routing rules or initiator rules, there are two sources for the information; the request header (attributes of the request) or the request line items (attributes of the roles on the request). There are some fields which may exist in both (e.g. Business process for the access request or the business process assigned to the Role) which explains why there are duplicates in the list. When selecting the conditions, scroll right to the bottom of the list and you'll find the Structures which show Header or Line Item. If you expand those, then you will see the list of fields again. By doing this, you'll know whether you're looking at the header or line item field.
Select the appropriate fields as the columns and then add in the rows to identify the specific criteria.

ADF Popup Dialog Not Showing Working

I'm using JDeveloper 10.1.3 and ADF. I have been unable to get a dialog popup working. When I click on a commandLink in the Originating page, it only refreshes the Originating page and does not open the destination page at all. It's happening in both FF and IE.
Within the faces-config.xml I created a navigational rule with outcome that begins with dialog.
Extracted sample from faces-config.xml:
*<navigation-rule>*
*<from-view-id>/Originate.jspx</from-view-id>*
*<navigation-case>*
*<from-outcome>dialog:dest</from-outcome>*
*<to-view-id>/Destination.jspx</to-view-id>*
*</navigation-case>*
*</navigation-rule>*
The commandLink action attribute begins with dialog: and useWindow attribute is true.
Extracted sample from JSP document:
*<af:commandLink text="Go to Destination" action="'dialog:dest'"*
useWindow="true" windowHeight="250" windowWidth="300"
partialSubmit="true" id="originate"/>
Is there something I'm doing wrong? Any help would be greatly appreciated.
Thanks.

It seems like the dialog:popUp does not work if it is not nested within
<afh:html>
<afh:body>
<af:form>
<af:commandLink action="dialog:popUp"/>
</af:form>
</afh:body>
</afh:html>
I currently have it this way
<html>
<body>
<h:form>
<af:commandLink action="dialog:popUp"/>
</h:form>
</body>
</html>
P.S.
The former way works but it messes up page layout. It seems not to notice DIVs and image positioning.
Any clues as to why?
Edited by: user2709995 on Dec 31, 2008 6:31 AM

Organizer does not show in Elements 9...Mac

I am new to Photoshop Elements 9 and to Mac. I have just downloaded it today. I cannot find an organizer button....my screen shows Edit, Create, Share. How can I find the icon for Organizer? Since I am new to Mac, I am not yet skilled at navigating it. Any help someone could give me would be appreciated.

The mac app store version comes without the organizer. That's why it's called "Adobe Photoshop Elements 9 Editor" but I admit it's not very obvious from the app store page. I don't know if you can get a refund and buy the boxed version or the adobe download instead, if the organizer is important to you, but really the mac organizer is pretty paltry, so you're not missing much unless you've already got a windows organizer catalog that needs converting.

Filtering - DENY (bong-file) does not show/work

I have a very simple filter setup with only 2 entries, so 99.99% of the Internet gets blocked.
The custom Deny HTML page I have setup does not display on the clients computer when going to a page not in the allow list.
What am I doing wrong?
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
# Use only forward slashes in pathnames--backslashes can cause
# problems. See the documentation for more information.
Init fn="flex-init" access="$accesslog" format.access="%Ses->client.ip% - %Req->vars.auth-user% [%SYSDATE%] \"%Req->reqpb.clf-request%\" %Req->srvhdrs.clf-status% %Req->vars.p2c-cl% %Req->vars.remote-status% %Req->vars.r2p-cl% %Req->headers.content-length% %Req->vars.p2r-cl% %Req->vars.c2p-hl% %Req->vars.p2c-hl% %Req->vars.p2r-hl% %Req->vars.r2p-hl% %Req->vars.xfer-time%"
Init fn="init-proxy" timeout="300" timeout-2="15"
Init Test="C:/Sun/ProxyServer40/proxy-server1/config/Test.url" fn="init-url-filter" Test2="C:/Sun/ProxyServer40/proxy-server1/config/Test2.url"
<Object name="default">
AuthTrans fn="match-browser" browser=".*MSIE.*" ssl-unclean-shutdown="true"
PathCheck fn="url-check"
PathCheck fn="url-filter" allow="Test" bong-file="C:\\DENY.html"
ObjectType fn="block-ip"
Service fn="deny-service"
AddLog fn="flex-log" name="access"
</Object>
<Object name="file">
PathCheck fn="nt-uri-clean"
PathCheck fn="find-index" index-names="index.html"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service fn="send-file"
</Object>
<Object ppath="ftp://.*">
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve"
</Object>
<Object ppath="http://.*">
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve" method="*"
</Object>
<Object ppath="https://.*">
Service fn="proxy-retrieve"
</Object>
<Object ppath="gopher://.*">
ObjectType fn="cache-enable" query-maxlen="10" log-report="off"
ObjectType fn="cache-setting" lm-factor="0.10" max-uncheck="7200"
Service fn="proxy-retrieve"
</Object>
<Object ppath="connect://.*:443">
Service fn="connect" method="CONNECT"
</Object>
<Object ppath="connect://.*:563">
Service fn="connect" method="CONNECT"
</Object>The one odd thing. If the page i am viewing is using frames in the HTML code and there is a link to a page not in the allow list, the main frame that the link would display in does correctly show the deny html page. However, as said before, a simple request to say http:.//www.sun.com for example shows the browser's built in forbidden page.
Thanks

What ever default page the browser has for forbidden pages.
Like these:
[http://www.msexchange.org/img/upl/image0641086263614188.jpg|http://www.msexchange.org/img/upl/image0641086263614188.jpg]
[http://www.wictorwilen.se/WindowsLiveWriter/HTTP403ForbiddeninaSharePointsitewhenadd_D274/image.png|http://www.wictorwilen.se/WindowsLiveWriter/HTTP403ForbiddeninaSharePointsitewhenadd_D274/image.png]
[http://blog.stealthpuppy.com/images/cs/1000.14.124.403Forbidden.png|http://blog.stealthpuppy.com/images/cs/1000.14.124.403Forbidden.png]

Business rules not showing up in Planning

hi guys,
we qare in the development stage.
i logged in to planning application and could not see the business rules in the tools
.could some one help me out on this....very urgent

Hi,
One thing to check for is that hbrserver.properties exists in file structure under the planning web application, e.g.
\Hyperion\deployments\Tomcat5\HyperionPlanning\webapps\HyperionPlanning\WEB-INF\classes\HBRServer.properties
This example is for tomcat on 9.3.x
If the file doesn't exist there copy it from your AAS installation dir e.g. Hyperion\AnalyticAdministrationServices
Make sure you restart planning if you have to copy the file across
Cheers
John
http://john-goodwin.blogspot.com/

B Rules not showing up in webforms

Hi All..
I am not able to see B-Rules in planning web forms even for administrators. But i can associate B rules from essbase to any planning application and validate it. Can anybody give me hint why this is happening ?
Many Thanks

Hi
I assume you are looking to attach a BR to a form and cant see any to do so? Thats the impression I got from your post, correct me if im wrong....
In EAS, what Location have you added to the BR? Within the BR Location tab, we are able to add the same DB through either the Essbase or Planning server path...if you have added it through the Essbase path then I dont think you will be able to see it through Workspace to add to a Form..
Can you check this?
Ta
JB

RAR Organizational Rules not showing/working on RAR 5.3_13.3

Similar Messages

Maybe you are looking for