RAR- Permissions are not populated when i create/change a funtions of actns

Hi
I have uploaded all SU24 data thrw upload objects and also all rules.
but surprisingly when I create / change any funtions trying to add a tcode when I go permission tab for the tcodes they are having + symbol but no authorizatiob objexts.
Even we tried reloading the upload objects, but of no use.
can you pls help us on what may be the problem

Hi Varun,
Thanks for your updates..
I changed file format to UTF-8 then uploaded..same result..
Also when I browse the data from the table using debugger..it showing the belwo records
Row      SAPTCODE                                   SAPOBJ                             SAPFIELD                  SAPLOW      SAPHIGH
1          /BDL/SDCC                                    S_SDCC_ADD                    SDCC_DEV_N            READ            /BDL/SDCC
2           /BEV1/91000162                          S_TABU_DIS                       ACTVT                        02                 /BEV1/91000162
Look at the SAPHIGH values it is taking value as tcode infact I could see that values is next line in the su24_data file.
here I am coping the RAR log...surprisingly there is no errors..
Sep 23, 2010 9:24:05 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO compareWithSAPOBJTable
FINEST: target size 1
Sep 23, 2010 9:24:05 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO compareAndInsert
FINEST: compare sapobj tcode:result ?/BDL/SDCC:0
Sep 23, 2010 9:25:56 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO compareWithSAPOBJTable
FINEST: target size 0
Sep 23, 2010 9:25:56 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO compareAndInsert
FINEST: compare sapobj tcode:result ?/BDL/SDCC:-1
Sep 23, 2010 9:25:56 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO insertSAPOBJ
FINEST: insert into sap obj
Edited by: Hari Krishna Prasad kantipudi on Sep 23, 2010 6:22 PM

Similar Messages

  • Directories are not populated when I import xml file

    After a crash I got all my music back, I also got the playlist names. But the playlists are empty.

    Hi Varun,
    Thanks for your updates..
    I changed file format to UTF-8 then uploaded..same result..
    Also when I browse the data from the table using debugger..it showing the belwo records
    Row      SAPTCODE                                   SAPOBJ                             SAPFIELD                  SAPLOW      SAPHIGH
    1          /BDL/SDCC                                    S_SDCC_ADD                    SDCC_DEV_N            READ            /BDL/SDCC
    2           /BEV1/91000162                          S_TABU_DIS                       ACTVT                        02                 /BEV1/91000162
    Look at the SAPHIGH values it is taking value as tcode infact I could see that values is next line in the su24_data file.
    here I am coping the RAR log...surprisingly there is no errors..
    Sep 23, 2010 9:24:05 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO compareWithSAPOBJTable
    FINEST: target size 1
    Sep 23, 2010 9:24:05 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO compareAndInsert
    FINEST: compare sapobj tcode:result ?/BDL/SDCC:0
    Sep 23, 2010 9:25:56 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO compareWithSAPOBJTable
    FINEST: target size 0
    Sep 23, 2010 9:25:56 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO compareAndInsert
    FINEST: compare sapobj tcode:result ?/BDL/SDCC:-1
    Sep 23, 2010 9:25:56 PM com.virsa.cc.rulearchitect.bo.SAPObjectBO insertSAPOBJ
    FINEST: insert into sap obj
    Edited by: Hari Krishna Prasad kantipudi on Sep 23, 2010 6:22 PM

  • Entity Attributes are not populating while creating EO using EO wizard.

    Hi,
    I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
    I am facing problem while creating EO using EO wizard.
    In Entity Object Editor Entity Attributes are not populating while creating EO.
    Please help me resolve this issue.
    Thanks & Regards,
    Sagarika

    Please ensure you click on Tables and Synonyms check box and select proper schema.
    Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
    Thanks
    AJ

  • Change pointers are not generated when creating a material master

    Dear Experts,  
    Change pointers are not generated when creating a material master. 
    However, when a change is made to the already created material, the change pointers are created according the fields in BD52.  
    Am I missing any settings?
    I need to create change pointers immediately when I create the material master in MM01.  
    Please suggest. 
    Regards,
    Shetty

    did you follow the steps given in
    http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

  • HT5312 I did all the steps, but my problem is that they are asking me some questions that I did not select when I created my Apple ID, so I clicked where it said reset security questions info... and then when I went to my email, they didn't sended me anyt

    I did all the steps, but my problem is that they are asking me some questions that I did not selected when I created my Apple ID, so I clicked where it said reset security quiestion info...... And then when I went and cheked my email, they did not send anything to me!
    This problem started 1 month ago!
    Ivana1728

    The email response is automated, and almost certainly is detected as "junk" or "spam". So, try again and check your spam folders for their reply.

  • Exchange 2010 Room Calendar Permissions are too permissive when Default is set to None.

    Help! Room Calendar permissions are too permissive when Default is set to None.
    We are a brand new Exchange 2010 shop, and have setup several conference rooms.  Many of them are restricted to specific groups to book via In-Policy Requests using Resource Booking Attendant.  The Room Calendar permissions for most
    rooms shows only two options for the Default access: None and Full Details.  Default is set to None, yet if someone opens the room calendar in Outlook (& they are not part of the In-Policy restrictions) they are able to see the full meeting details
    (even open the meeting for full details).  How is this possible when by default they should not have any access as it is set to None?  Some rooms would not be a problem for clients to see the details, but some rooms like Executive rooms need to be
    locked down so that others cannot see the room details - None.
    I also found this, although it did not make a difference.  If I create an Outlook profile for the room and login as the room calendar in Outlook, go to File, Options, Calendar, Resource Scheduling, Set Permissions I get different default options:
    None, "Free/Busy time", "Free/Busy time, subject, location" and Full Details.  Why do I have more options in this view rather than the Room Calendar Permissions?  I looked at two rooms and both Default options were set to "Free/Busy
    time", so I changed these settings to None.  Still the clients can view the full room calendar details.  What are we missing to get the room calendar locked down so it is not displaying details to everyone?

    Only the default groups and Exchange Admins have Full Access to these items, so that is not the issue.
    -MailboxFolderPermission 1RP07AWest:\Calendar cmdlet and it shows the same access I see when I open the calendar in Outlook and view the Permissions as shown below - Default is set to None.
    As I stated in my last reply the only thing that finally forced it to be blocked is changing the Resource Scheduling permissions under Options > Calendar for that room mailbox.  If I have to do that for each room calendar, it's going to
    take considerable time to change each one.  Is there a cmdlet to allow me to access and change that setting as well?
    RunspaceId   : ea4ebc26-1d22-4a7d-b115-1b609099bae3
    FolderName   : Calendar
    User         : Default
    AccessRights : {None}
    Identity     : Default
    IsValid      : True
    ObjectState  : New
    RunspaceId   : ea4ebc26-1d22-4a7d-b115-1b609099bae3
    FolderName   : Calendar
    User         : Anonymous
    AccessRights : {None}
    Identity     : Anonymous
    IsValid      : True
    ObjectState  : New

  • Some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    some of my contact names are not appearing when they text message me.  They are just showing up as their numbers. I have them saved in my phone so i am not really sure why their names aren't showing up when they message me?

    I have this identical problem.  For a while my group texts didnt show up on my ipad.  Then one day they did, maybe everyone in the group started using the same os version or something.  Ever since my first reply to the group there have been complaints of multiple threads.  I can not find a pattern for when my group text's decide they want to create a new thread. (it doesnt happen every time)  Everyone in the group has deleted the thread, we've all toggled imessage on/off etc.  There still hasn't been a solution.
    Any help would be appreciated.
    Thanks

  • Why Dynamic Parameter is not working, when i create report using stored procedure ?

    Post Author: Shashi Kant
    CA Forum: General
    Hi all
    Why Dynamic Parameter is not working, when i create report XI using stored procedure ?
    Only i shaw those parameters which i used in my stored procedure, the parameter which i create dynamic using stored procedure
    is not shown to me when i referesh the report for viewing the results.
    I have used the same procedure which i mention below but can not seen the last screen which is shown in this .
    ============================================================================================
    1. Select View > Field Explorer2. Right-click on Parameter Fields and select New from the right-click menu.3. Enter u201CCustomer Nameu201D as the name for your parameter4. Under u201CList of Valuesu201D select u201CDynamicu201D5. Under the Value column, click where is says u201Cclick here to add itemu201D and select Customer Name from the drop-down list. The dialog shown now look like the one shown below in Figure 1. Click OK to return to your report design.
    Dynamic Parameter Setup6. Next, select Report > Select Expert, select the Customer Name field and click OK.7. Using the drop-down list beside select u201CIs Equal Tou201D and using the drop-down list, select your parameter field (it should be the first field). 8. Click OK to return to your report design and see the parameter dialog.The parameter dialog will appear and show you a dynamic list of values that is updated each time your run your report. It couldnu2019t be easier! In our next tutorial, we will be looking at how to use this feature to create cascading parameter fields, where the values are filtered by the preceding selection.
    Dynamic Parameters in Action
    My question is that whether dynamic parameter is working with storedprocedure or not.
    When i added one table and try to fetch records using dyanmic prameters. after that i am not be able to find the dynamic parameter option when i referesh my report.
    One more thing when i try the static parameter for my report, the option i see when i referesh the screen.
    Please reply soon , it's urgent
    Regards
    shashi kant

    Hi Kishore,
    I have tested the issue step by step by following you description, while the first issue works well in my local environment. Based on my research, this can be caused by the lookup expression or it indeed return Male value based on the logic. If you use the
    expression below, it will indeed only return the Male record. So please try to double-check the record in the two datasets and the expression in your environment:
    =lookup(first(Fields!ProgramID.Value,"DataSet1"),Fields!ProgramID.Value,Fields!Gender.Value,"DataSet2")
    As to the second issue, please try to use the following expression:
    =Count(Lookup(fields!ProgramID.value,fields!ProgramID.value,fields!Gender.value,"DataSet2"))
    Besides, if this issue still exist, in order to trouble shoot this issue more efficiently, could you please post both the .rdl  file with all the size properties to us by the following E-mail address?  It is benefit for us to do further analysis.
    E-mail: [email protected]
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Permissions are not displaying correctly on Yosemite server

    My file and folder permissions are not displaying correctly on my Yosemite server when viewed from a Yosemite client.
    I have set these permissions from the server app on the server and have added local network groups for the appropriate folders on the share.  When checked from the server's finder, everything looks correct.  The server is setup for both AFP and SMB on file sharing.  I have also tried setting permissions from the server's finder and seemed to make no difference.
    When logged into from local or VPN Yosemite clients using AFP, the permissions do not show anything but postgres user and everyone group.  Even though they should have network groups such as skoogfinancial, skoogmarketing, etc.
    The server does seem to enforce the permissions correctly though a user cannot get into folders he does not have permissions for.
    Therefore, it seems the server is enforcing correctly, but a user may not understand what is going on as the permissions list doesn't list anything meaningful.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Down pmnts with taxes are not permitted when processing with jur.code (Message no. FS206)

    Hi Guys,
    I am facing very critical issue on down Payment request, to process with saperate Tax Value.
    We are supporting on Roll-out for Germany. We have implemented all standard SAP processes in the Project. We have also implemented many interfaces and one of the Interface is Sabrix Tax Engine (Tax Jurisdiction Code).
    As per the Germany legal requirement, the Tax has to get calculated whenever the funds gets transfered from one Bank Account to Another Bank Account.
    Coming to the issue: In the Customer Down Payment scenario, we are creating the Down payment request for Customer and as per Germany local requirement the Tax of 19% has to get calculated on Down payment.
    For an Example: We have the Sales Order Contract Value of 100,000.00 EUR and we are creating the Down Payment reqeust of 10% which is 10000 EUR + Tax 19% 1900 EUR.
    We are trying to post the Down Payment request in F-37 and we get the issue "Down pmnts with taxes are not permitted when processing with jur.code". This error is appearing due to Sabrix Tax engine (Tax Jurisdiction Code) has implemented in our System.
    We have gone through the SAP notes 97288 and 213567 and understood that the Standard SAP does not support us to post the Down Payment request with Separate Tax Value, when the External Tax Engine has implemented.
    I request you to suggest me, if you have already seen this issue in any of your Projects and fixed through the work-around solution. We have been working on work-around since 2 weeks, however no result.
    Below is the error message:
    Down pmnts with taxes are not permitted when processing with jur.code
    Message no. FS206

    HI Preeti,
    Thanks for your response. We have already seen the similar SAP notes and the SAP notes explains that the "Down pmnts with taxes cannot be done along with with jur.code". The only solution is to post the DP without Tax.
    However there might be some workaround which can be done in SAP, to process the Down Payment/Advance Payments with Tax Value along with Jurisdiction Code. I would like to know this.
    Did any one seen this case in your experiece, if yes, what is the work-around solution?.
    Need your help guys!,...
    Regards,
    Damodar Naidu

  • I burned my first iDVD andpicture quality is not good.  Originals are excellent.  My photos are shot in raw or jpeg, both are not sharp when I view my DVD.  I viewed it on my 1080 dpi tv and my new apple computer.

    I burned my first iDVD andpicture quality is not good.  Originals are excellent.  My photos are shot in raw or jpeg, both are not sharp when I view my DVD.  I viewed it on my 1080 dpi tv and my new apple computer.

    There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
    If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
    Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
    http://www.lqgraphics.com/software/phototomovie.php
    (Other users here use the alternative FotoMagico:  http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
    Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
    Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie  as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast,  for burning.
    You will be pleasantly surprised at how professional the results can be!
    To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
    http://support.apple.com/kb/HT1089

  • I lost all my colored tags in OSX - They are not listed when I go to Finder/Preferences/Tags.  How can I get them back

    I lost all my colored tags in OSX - They are not listed when I go to Finder/Preferences/Tags.  How can I get them back

    Hi, try this...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Reboot.

  • UDF are not populating in design console

    Hi,
    I have created UDF in admin console and mapped then in self service form as well. Fields are now reflecting in the user creation form. I have also published the sand box but these fields are not populating in design console.
    Please help me in resolving this issue.
    Thanks!

    Did you add these fields in View User for ?
    Create and activate a new sandbox
    Add your fields on View User form
    Publish Sandbox
    Test
    I have also published the sand box but these fields are not populating in design console.Didn't understand but you can't see User Form UDFs in Design Console.

  • Graphical mapping issue, repeated lines are not populating

    Hello All,
    i have mapping where i need to map source node and its coresponding subelements to target node and its subelemtns based on certains condition, which i did using If condition.
    Now my issue is, when mapped source node with condition , conditional field is not in the same node which i am mapping. It is in the parent node of the node which i am mapping. SO when i mapped to target node, only one occurence only its populating in target side even When lines repeated more than once its not populating all lines corespondingly. Please let me know how to populate all line items when i have validation field in parent node and child node and its subelemnts to be mapped to the target node. ( Both parent node and sub node in source and target node are unbounded) .
    Thanks in advance.
    Regards,
    Kalpana

    Thanks for your reply, My source structre looks like below.
    I have to map rows node and its coresponding fields to target node Lines which is unbounded and to its subelements when collection name = 'MATGRP_COLLN'.  I did it using if condition but , only one row tis getting populated in target LIne node. next repeated row values are not populating in target side.
    - <extensions>
    + <collection name="REGION_COLLN" />
    +  <collection name="DIVISION_COLLN" />
    + <collection name="DTL_PRCNG_COLLN" />
    + <collection name="COUNTRY_COLLN">
    - <collection name="MATGRP_COLLN">
    - <row>
    - <fields>
      <OBJECTID>-2147483540</OBJECTID>
      <UNIQUE_DOC_NAME>-21474835401248121690973</UNIQUE_DOC_NAME>
      <DISPLAY_NAME />
      <MATGRP_ITEM_NO>1</MATGRP_ITEM_NO>
      <MATGRP_NAME>10100000</MATGRP_NAME>
      </fields>
      </row>
    - <row>
    - <fields>
      <OBJECTID>-2147483539</OBJECTID>
      <UNIQUE_DOC_NAME>-21474835391248121706160</UNIQUE_DOC_NAME>
      <DISPLAY_NAME />
      <MATGRP_ITEM_NO>2</MATGRP_ITEM_NO>
      <MATGRP_NAME>10101500</MATGRP_NAME>
      </fields>
      </row>
      </collection>
      </extensions>
      </object>
      </objects>
      </fcidataexport>

  • MetaData operations are not supported when

    Dear Experts
    I am facing below error when trying to run my add-on in Windows  Server 2008 R2 and SQL Server 2008 service pack 2.
    Error: MetaData operations are not supported when a user transaction is active
    It runs fine in Sql Server 2005.
    Kindly tell me a solution to sort this out.
    Regards
    Shibin

    Can we see your code, it looks to me like the error is quite descriptive - its saying you can't do any metadata operation (creating/updating user fields, user tables using userfieldsMD or usertablesMD objects) while in a transaction.
    Previous SDK examples have shown that you can do it, but they it is not possible - it may be that SQL 2008 has a tighter control over this. (Did you also do a B1 upgrade, or just change SQL version?)
    Are you running a transaction?

Maybe you are looking for

  • Ship to party for each material using BAPI_SLSTRANSACT_CREATEMULTI

    i am able to generate sales order for in CRM. I am inputting the sold to party, ship to party, bill to party and payer at the header level... CRM is currently configured in such a way that , there is a provision to assign ship to party at item level

  • Data is modified after an pdf export

    Hi, I have a problem with PDF export. When I export a report in PDF, in the Details part '8' are replace by '6' and '6' are replace by 'y', when I export in excel I don't have this problem. Do you have a explication and a solution. Thank you. PS: I c

  • Report Painter limitation ?

    Hi, I would like to know if there is a limitation in terms of number of columns you can put in a report group. I faced an abap dump: GEN_TOO_MANY_CBS in program :GP4H8AW59EG48IDI1VCN6J35D0J007 I have defined 4 reports - one of the reports have 2 sect

  • How do you change the x in "Repeat in x minutes" in iCal?

    What I would like is a way to modify the reminder times. When an event pops up I can only choose: repeat in 1 minute, 5 minutes, 1 hour, sometimes 2 hours... I would like to have something like 10 minutes before event starts or in x hours, where x is

  • Steve Jobs should demonstrate how tough 5G is in public :p

    complaints everywhere about 5G scratch. Apparently the case is not working? or no one use them..? If the case doesnt help, people should ask steve jobs to do a demonstration of the toughness of 5G They should just put a warning on the box and say "tr