Rating issue with explorer only

Hi,
We're having issue with IE 8-10 and "Ratings" on every page that hold them.
Problem description:
1. Open some page containing Ratings (EnterpriseWiki layout if you may)
2. Ratings at the right side won't show pics (small stars)
3. After refreshing the page they are shown (which is great)
4. But, after going to the same page again, they're not shown.
The issue repeats itself almost in every farm (8 at least) and it doesn't matter if site customized, upgrade from 2010 or installed OOTB.
It's important to note that this issue happens ONLY in IE versions, while FFX and Chrome rendering Ratings without any problem.
Also, it is not a Distributed Cache issue (check with microsoft support already).

Hi ,
Did it work well when you used IE 8 document mode?
If yes, you can force to use IE 8 mode on SharePoint 2013 installation by adding X_UA-Compatible tag to master page. You need to add the
control as :
<meta http-equiv="X-UA-Compatible" content="IE=8"/>
Here is a similar post for you to take a look at:
http://www.sharepoint2013.me/Blog/Post/136/SharePoint-2013-wiki-site-Page-Rating-issue-in-IE-10
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Similar Messages

Issue with Read only VO Query bind parameters

Hi Experts,
Working in Jdev 11.1.1.3.0
I am face one issue, probably its very common to all of us, bcoz i to do the same thing in N number of times.
Issue:
select count(*) as cnt from emp
where
((:BindEmpId is NOT NULL AND EMP_ID = :BindEmpId) AND
(DEPT_ID IS NULL OR DEPT_ID =: BindDeptId));
when i run this query its giving correct result(count is 0) but usually i written like
select count(*) as cnt from emp
where
((:BindEmpId is NOT NULL AND EMP_ID = :BindEmpId) AND
(BindDeptId IS NULL OR DEPT_ID =: BindDeptId));
this time its giving count is 1, which is wrong.
Data in data base:
ID     DeptID     value EmpID
226     1519     jh 601
So which one is correct?

Well, the two select statements are for different use cases and we can't decide which is the correct one as we don't know the use case.
Your data looks like
ID   DeptID value EmpID
226 1519   jh    601 There are some decisions we can't make with only one row in the table. We don't know if DepIt can be null in the table and/or EmpId can be null. This information is vital for your select statements.
Next we don't know how you want to handle the query if one or both bind parameters are null.
Should the query return 0 in this case or should the query just omit the part of the query if the bind variable is null (and then return the result found with the remaining query)?
We can't possible answer this.
You need to provide more information...
Timo

Photo Gallery problem issue with explorer browser

Hi there,
I made a personal website with a photo gallery from iweb and everything run cool in a Mac system but when I visualize my photogallery from my website in an Explorer Browser from windows, my pictures doesn´t appear, we cannot see anything.
Is anything to do to fix this problem?
Thanks,
Marco
the site is this www.marcoluz.com

There are three patches to fix iweb photos page for FF3 posted in this forum:
http://discussions.apple.com/thread.jspa?threadID=1563823
http://discussions.apple.com/thread.jspa?messageID=7418611

42SL417 Connection or Compatibility Issue with Explorer Cable Box 8642HDC

I have the TV listed above and recently switched to Brighthouse cable. Intermittently my TV loses the connection to the cable box and the input information (1080i, 720p, etc) comes up across the top of the TV and the picture resets. I had the cable guy out and he said that there was a compatibility issue between the TV and the cable box. I didn't get all the information since he talked to my wife, I was at work. I don't believe that this is the issue, but wanted to check to see if this was a known problem or if anyone has had a similar experience. My firmware is 2.2.2, which I believe is the most current. Any thoughts or ideas? The best I could get from my wife was that the box was trying to communicate with the TV to maximize resolution and the delay creates the connection problem. Before I call the cable company back, I wanted to get some opinions. My thought is that there is a signal problem since the internet had connectivity problems as well. He changed the cable on the internet connection and said that would fix that, but I can't believe they aren't related.

That is indeed the latest firmware.
You may want to perform a factory reset, as described on page 44 of your user's guide. After the reset, ensure your TV is off and unplug it for a few minutes. All your settings will be reset, so you will have to set up the TV again.
You might also want to try disabling CEC (page 39) or auto aspect ratio feature (page 47).
I don't know for sure that any of this will help, but these are your best bets. Unfortunately, if none of this helps, I'm out of ideas.
- Peter

Packaging issue with PDF only - EPUB works

Has anyone seen this while using the packager service on a PDF?
     java.lang.NoClassDefFoundError: Could not initialize class com.adobe.adept.packaging.pdf.
Everything else seems to be working very well, all services running and test ok, EPUB packaging works ok, etc. The class file is there, and otherwise the packager seems to be working.
Tomcat6 / Linux / java version "1.6.0_20"

Here's more info - it seems to appear in the log earler, the PDFPackager doesn't init due to JsafeJCE init failing:
Caused by: java.lang.SecurityException: JsafeJCE provider self-integrity check failed
     at com.rsa.jsafe.provider.JsafeJCE.<init>(Unknown Source)
     at com.adobe.adept.packaging.pdf.PDFPackager.<clinit>(PDFPackager.java:73)
I've determined that the jsafeJCE.jar is a signed JAR, and the certificate is out of date.
I tried to install a more recent jsafeJCE.jar from the EMC/RSA project, but that just apparently masked the error. I think the root cause is in fact the signed JAR certificate has expired.
Any advice on either:
a) Getting an updated jsafeJCE.jar that has a valid signature, or
b) Configuring Tomcat/Java to consider an out of date signing certificate as OK (eg, relax this requirement)
Thx -

IE issues with Spry horizontal men

Hi..I created a spry horizontal nav bar and its works fine in
FF, but in IE7 the pull down menus are going all over the place!
The first sub menu goes in the wrong direction and the sub sub menu
flys off to the right. Does anyone have any suggestions? Basically
the horizontal positioning is all messed up! Thanks so
much!!!

I'm having similar issues with IE - only I don't get the nav
at all. Absolutely fine in FF, but it's like I never even created
the menu (save for the code as evidence) when I look in IE.

Open with explorer issue only in one of the web application.

getting error message as when we click on open with explorer :
""we are having problem opening this location in file explorer", gone through many blogs and tried different steps but no luck.
Versions are : IE11 AND SP 2013
This is happening only with one of the particular web application. please help.
Added the “desktop feature” role in SharePoint server and rebooted the server
a) Cleared your cookies in IE (Tools > Options > Delete browsing history > select cookies).
b) Turn off Auto-detection of proxy (In Tools select Internet options->Select
Connections tab->Click
Lansettings button->Under
Automatic configuration clear the
automatically detect settings
checkbox).
Added SharePoint site is in the trusted list
Restarted the Web Client service has started in services. MSc list
Add the SharePoint site to compatibility settings.
Tried using 32 BIT IE but no luck
Verified host names and IIS Bindings
Please help.
Thanks, Ram Ch

HI Ram,did you tried with other browsers other Than IE11.please check with firefox or chrome and share the result.IE11 is having the issues with sharepoint 2013.please check the link below that explains more details.
http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Weird graphics and other issues with internet explorer in all versions.

One of our laptops has an issue with their Internet Explorer. First, whenever the user logs on and starts internet explorer and navigates to any website, the website loads for a bit but then immediately displays a "Page cannot be displayed" error.
Every single time. If we try browsing again/refreshing the page it loads fine. But during regular browsing, we might get that page again.
Another issue that happens is sometimes the graphics logos won't load properly. See screenshot:
http://i.imgur.com/0usOPpu.jpg
And this happens a lot. If this won't happen, the websites will only load with half its formatting missing.
Now we have:
-Thoroughly checked computer for viruses. Several full scans have been done with MalwareBytes with no issues found. Microsoft Security Essentials has been installed, full scan done, no viruses/spyware/adware found.
-We have tried upgrading to IE11. Same issue. Downgraded to IE10. Same issue. Downgraded to IE9, same issue yet again. IE was Reset each time.
We checked if it could be a network issue, but none of the other computers connected to the same switch has issue like that.
Any suggestions/ideas to try?

Hi,
I suggest you temporary disable antivirus and firewall, then check the result.
You may try the steps from the links below to check the issue:
"Internet Explorer cannot display the webpage" error
http://support.microsoft.com/kb/956196/en-us
Internet Explorer "Page Cannot be Displayed" error due to Bad Proxy Server Timeout
http://support.microsoft.com/kb/2551554
You may also refer to the computer or device manufacturer website and try installing the latest version of chipset, graphics card and video card drivers and check.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Explorer issue with video swf

Hi can anybody tell me why Internet explorer did not open the video, before I had accept to open this site, in firefox it just open,
I have tried Amara slide show bouilder, and here there is no problem with the swf files in explorer.
I know that I in the internet explorer option can change this irritating bloking, so can anybody tell me why this happened for me
I have visit a lot of internet homepage, where there is a video and where internet explorer did block the site.
I have sent my html file and the swf file.
best regard
kenneth

Hi,
Does the issue occurs with other browser such as Chrome or Firefox?
Please try the following to check the issue:
1. Updating your graphics driver. visit the website of your computer manufacturer to download the latest driver.
2. Disable hardware accelerate to check the issue
Hardware acceleration is a feature in Adobe Flash Player that usually delivers a better video playing experience; however, sometimes it may cause issues.
The option to disable hardware acceleration is only available for certain versions of Adobe Flash Player system plug-in and operating systems (OS).
Follow these steps to see if the option is available:
a. Right-click on the on the video you’re having issues with
b. Click Settings
c. If you see the option Enable hardware acceleration, deselect it. If you don’t see it, the option is not available for you.
d. Click Close
e. Refresh the page and check whether the video is working
Once you disable hardware acceleration, the change will apply across all Internet browsers on your computer.
3. Reset Internet Explorer settings
http://support.microsoft.com/kb/923737
Please understand that reset Internet Explorer to its default configuration. This step will also disable any add-ons, plug-ins, or toolbars that are installed.
4. Disable the security software temporarily and see if it works.
Hope it helps.
Regards,
Blair Deng
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SAP DS 1.3: Performance issues with crosstab planning (IE only)

Hi everyone,
because im currently developing a custom component for DS 1.3, I got in touch with the planning feature of design studio. Planning currently only works in a crosstab.
Here I recognized a significant performance issue with the internet explorer:
If you simply type in a new value into a cell in a crosstab, it takes ~10s to confirm it (not constant! Sometimes it takes 2s, sometimes 15s). During this 10s, it seems like the IE crashed - no response at all. Sometimes there is also a warning message on bottom ('... script is slowing down the application ...').
Tested the same scenario with Chrome and FF - takes less than 1s to confirm.
Whats going on here ...? Anyone experienced the same issues?
My testing environment:
Windows 8.1
IE 11 (also tested emulated Ie 10 and IE 9 - same problem)
DS 1.3.0.3.201405141058
Local mode
Application only contained a simple crosstab, data source based on BW 7.3 query
Of course I deactivated all custom components while testing...
Kind regards
Wladimir

Hi Tammy,
Thanks for your reply. Of course, my IE is updated to latest version (11.0.9600.17207).
Hopefully SP1 will fix this bug...
Kind regards
Wladimir

Wordpress website issues with Internet Explorer 8,9,10

Hi,
I have developed a website using Wordpress. http://www.worldretailcongress.cn/
While I have no issues loading up the website on the Google Chrome and Firefox, I have been experiencing severe display issues with Internet Explorer. Sometimes the page appears to be broken.. while on other times, I cannot click through an action on the
iframe.
I tried using the meta tags <meta http-equiv="X-UA-Compatible" content="IE=Edge"> to force the page to load the latest engine...
And then as described on this blog, I added yet another meta tag http://2slick.com/web/wordpress-problem-with-ie9internet-explorer-9/affordablewebsitestips/tutorials
<meta
http-equiv="X-UA-Compatible"
content="IE=EmulateIE8">
Could someone help me, how could I solve this?
Best regards,
Prashant

http://www.worldretailcongress.cn/
The only thing that I can load is your favicon
http://www.worldretailcongress.cn/favicon.ico
I was going to say that Modern.IE couldn't see anything either but while I was composing this it came back
http://modern.ie/en-us/report#http%3A%2F%2Fwww.worldretailcongress.cn%2F
Robert Aldwinckle

[SOLVED] Touchpad issues with Eee 900A, only with Arch.

Hi guys, posting here because I'm having a hard time tracking down this issue.
I recently aquired an Eee PC 900A, which I have running the 2-09 arch build no prob, but I'm having one massively annoying issue with the touchpad under X.
Whenever I lift my finger and replace it on the touchpad, at anything but super slow speed (and sometimes even then), the cursor will jump, an in or so back..
Now I thought this might be a hardware issue, so I've tried booting into different distros (after trying tons of configs for the synaptics driver in xorg.conf), and this dosen't occur in the Xandros distro that ships with the Eee, or in Eeebuntu..
I'm pretty certain it's not a config issue, Eeebuntu uses hal, I've tried using hal, and dozens of xorg.confs.. I've also tried the zen-eee kernel for the 1000/901's, which is older, and still has the same issue.
So I'm sure this is a software issue, but I'm not sure which.. It even happens if I dont have the xf86-input-synaptics driver installed.. I'm not going to post my xorg.conf here, because it's irrelevant.. I've tried using tons, including the one that ships with xandros..they all change aspects of the synaptics driver, but none affect this issue.
Anyone else having this issue? Fixes, suggestions?
Thanks.
Last edited by dissimilation (2009-03-03 14:11:31)

hi guys,
I had a similar bug on my netbook with the Elantech touchpad. I have reported a bug to the maintainer of the Elantech driver and I get a patch that fix it.
description of my bug:
with two fingers above the touchpad, tap alterrnatively with each finger on the touchpad.
- expected behaviour: the cursor does not move.
- actual behaviour: the cursor jumps sometimes to the left or the right.
this only happens when configuring the touchpad with synaptics (by defaults, mine is detected as a mouse)
is your bug the same than mine ?
are you using both the proto=exps option and synaptics ? (I still have the bug in this configuration)
if it is the same bug, I have submited the patched kernel to AUR

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

Second s5 update has made wifi and data run simutaniously, being charged for data only way to turn off Data is to go to settings. I had same issue with my other phone. Recieved two replacement phones the SIM card did not work on replacements took phone ba

Wifi and Data running simultaneously. Data was being charged to my account even though I was on WIFI. No one can fix the issue. I have wasted 8 hours of my life and went and returned my phone and got a new one yet after the last update I now have WIFI and Data showing that they are running simultaneously. I have looked at numerous message boards and turned off Caller ID don't have Volte on my phone but do get an error with Visual Voice Mail. I don't want any of these services, you are not helping your customers Verizon or Samsung with forcing us to update. I tried not to update my NEW phone that I had to get from Costco because of this exact same stupid issue happen on my last one. But every time I said NO to update the next time I did anything on the phone the UPDATE would pop up again. I would say NO it would come back. I was doing a text and it came up and I hit update not wanting to and then my phone began updating on a low battery. I had to rush to put on charge and then my WIFI and Data came back on together with arrows on all going up and down. I HATE the lack of support I get from SAMSUNG and VERIZON... Verizon washes their hands and say these are not Updates even though these are the features we have on all our phones like Visual Voice Mail and Volte...

I did look at the Settings/Cellular to check the applications. This is one of the steps I did with the person from Verizon who was an "iPhone Specialist". And he didn't see anything unusual. And I can honestly tell you they have very minimal number of apps on their phones.
When I went to the Apple Store the first time with this problem, they had me update the phones iOS systems to see if this would correct the problem. They were each running older versions but different versions. One son had one update to do and the other had a couple of updates needed. So, the problem started before they were updated and they weren't even on the same update. And nothing changed after we did the updates.
I didn't reboot the router and modem, because I'm not having any other issues with my phone, my husband's phone, our iPad, xbox, PS3, or laptops. Would the wifi only affect their phones?

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

Rating issue with explorer only

Similar Messages

Maybe you are looking for