Raw material Stock not reducing when cancelling Subcontracting MIGO

Dear All,
We are facing problem in subcontracting process. Suppose we have a HALB material X which is made up of material a and b.
When we are receiving material X stock of material a and b is reducing at vendor end. but when we are cancelling MIGO or doing return delivery stock of material a and b is not increasing at vendor end.
Due to this we are unable to get exact raw material stock lying at vendor end.
It means when we are cancelling subcontracting MIGO stock of raw material is not increasing at vendor end instead of it HALB material stock is increasing at vendor end.
Please suggest.
rgds
Awnindra Dutt Tiwary

k

Similar Messages

  • Raw material stock to be consider against sales order in md50(i.e mrp run)

    when i run MD50 against particular sales order, it is not considering stock of raw material. it is creating planned order for raw material which is already in stock. my problem is that when i run mrp it should consider my raw material stock.
    manish.

    Hi Manish,
    Correctly said by all our Experts (Mr.Brahmankar , Mr.Dharma)
    Now all you have to decide whether you want to go for this individual or Collective requirment type.Because on one hand
    - If you select individual requirement then system will not consider available stock and generate Proposals for every single requirments.
    Also you will find PR and Plan order with account assignment of Sales order (in case of MD50)
    - If you select collective requirement then system will not generate planing proposals through MD50.In that case you have to go for individual MRP (MD02 / MD03 / MD41 / MD42).
    Regards,
    Dhaval

  • Raw material cost not coming KE30 profitability report

    Dear Gurus,
    We have two material type for our finished product for one material type without having cost release for current period we can't release the billing document for accounts but in other material type we can release the billing document for account without releasing the cost for current period.
    This occurs with problem that in KE30 we are not receiving the raw material cost & administration cost. Please suggest what should I do to correct this?
    Thanks in advance.

    Hi,
    I already assigned costing key to material type (FERT,HALB) but bifurcation of COGM not flow to CO-PA.
    In T.code KEPR
    1.All F/V i maintained as 3 is it ok or i need to maintain it 1 or 2.
    2.In T.code KE4J
    Record type = F i maintained for FERT,HALB category materials & assigned in Costing key
    Earlier before release i assigned in T.code ke4i
    Condition type             Value fields
    VPRS                          Stock value
    Then some value flow to copa
    After i release i removed stock value from ke30 report and added material cost ,sub contracting cost,material overhead but no value flown CO-PA.
    Pl check
    Regards,
    Debashis

  • PP module: I reversed my settlement but now raw material does not appear

    Hi all,
    I did a small mistake in setting up MRP for finished goods therefore my amount came different. I got the message to see the log but as i could not locate the log and went ahead and completed the settlement.
    Then I found out the mistake and correted the same. But I had already made settlement, therefore I reversed my settlement.
    Now when I am doing>>> Logistics u21D2 Production u21D2 MRP u21D2 Planning u21D2 Single Item, Multi-Level....I can see only finished goods and raw material disappeared. Therefore I can not proceed and do my settlement.
    can somebody help me on this?
    regards,
    Supriya
    Edited by: Supriya Naik on Mar 3, 2011 10:19 AM

    To be precise...thats how my PP module is.......I need to do SD module but can not proceed because of this mess up...but it is making me learn a lot!!
    I would really appreciate your help.
    regards,
    Supriya
    Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Materials Management u21D2 Consumption-Based Planning u21D2 Plant Parameters u21D2 Carry Out Overall Maintenance of Plant Parameters
    Activate MRP:  Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Materials Management u21D2 Consumption-Based Planning u21D2 Planning u21D2 Activate Material Requirements Planning
    Create production sch profile: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Master Data u21D2 Define production scheduling profile
    Create prodn scheduler: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Master Data u21D2 Define production scheduler
    Control parameter for MRP: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Material Requirements Planning u21D2 Plant Parameters u21D2 Carry Out Overall Maintenance of Plant Parameters
    Assign availability check to order type: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Operations u21D2 Availability Check u21D2 Define Checking Control
    Define control perameters: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Operations u21D2 Scheduling u21D2 Define Scheduling Parameters for Production Orders
    define control parameters- Order Type: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Master Data u21D2 Order u21D2 Define order type-dependent parameters
    create confirmaton parameters: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Operations u21D2 Confirmation u21D2 Define Confirmation Parameters
    define valuation of goods received: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Shop Floor Control u21D2 Integration u21D2 Define Valuation of Goods Received
    MMR1- Created material
    MMH1- MRP view fo trading goods
    MMF1- MRP view for finished oods
    MD02- Run MRP
    CS01- Create BOM
    KL01- Create activity type labor
    KP26- set activity prices
    Work Center person responsible: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Basic Data u21D2 Work Center u21D2 General Data u21D2 Determine person responsible
    Create work center location: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Enterprise Structure u21D2 Definition u21D2 Logistics u2013 General u21D2 Define Location
    create work center controll keys: Tools u21D2 Customizing u21D2 IMG u21D2 Edit Project u21D2
    Production u21D2 Basic Data u21D2 Work Center u21D2 Routing Data u21D2 Define control key
    CR11- Create activity
    CR01-work center for finished goods
    CA01- created routing for finished product
    case
    MD02- Run MRP (got error- error calculating costs- see log....but wrongly saved)
    MD04- conversion planned order to production order
    MB1A- Gods Issue- 261- consumption for order from warehouse
    CO15- completion confirmation of production
    MB31-Goods receipt
    KO88-Settle Cost of production order

  • Availablity check in sales order considering the Raw material stock/procurement

    Hi Gurus,
    Our client Production process requires  the availability check at order level to consider the procurement time required for the Rawmaterial (BOM component of the FERT, whose sales order is taken) in cases when this RM is not available in the plant, and Availability check should not consider this procurement time when this RM is available in the plant.
    ie in first case, it should consider the total time for in-house production as well as the time required to procure the rawmaterials, along with all other times that we use like Gr processing time, packing picking etc.
    In second case it should not consider the RM procurement time, but only the inhouse production time and other times as applicable.
    To my understanding, Availability check at order level will only check the time given in the MRP view of the FERT, and it does not check anything about RM stock or RM procurement time.
    Can you please give me some suggestions to meet this requirement of the client (client is into Food Product Manufacturing).
    Your quick response will be very helpful

    You can try with user exits intended for ATP as recommended in the following note based on material type:-
    Note 1644443 - Documentation on User-Exits in the area of the availability
    That is as and when ATP runs for a sale order, with any of the exits listed out in the above note, you can validate for the material type which would be different for components and accordingly, write a coding in such a way not to consider such of those components.  But ensure that the user-exits are critical and should be tested carefully as cautioned in the note.
    G. Lakshmipathi

  • Raw Material Surcharge not pulling up on invoice

    I have configured the condtion type for Raw material Surcharge. The condition category is Invoice list condition. . However the raw material surcharge does not pull up on the invoice.
    I have it in my Pricing Procedure (Req- 23/ ALtcbv-2)
    I have also created the condition record for surcharge
    Would you guys now what i am missing.
    Response will be appreciated

    I have configured the condtion type for Raw material Surcharge. The condition category is Invoice list condition. . However the raw material surcharge does not pull up on the invoice.
    I have it in my Pricing Procedure (Req- 23/ ALtcbv-2)
    I have also created the condition record for surcharge
    Would you guys now what i am missing.
    Response will be appreciated

  • How to Identify an item as a Raw material or not?

    Hello,
    I would like to know how to identify a particular item that is bought, if it is a raw material that will be used for further processing to build any other finished product or if it is a finished product that can be sold directly. I need to find out which table and which column we can find the information from?
    For example, we bought an item like motherboard, which is used as a raw material to build a laptop.
    I suppose it is clear, so, can any one let me know which table has this kind of information. Is it available in the Purchasing module tables like PO_Headers_all, etc..
    Thank you

    Check table MTL_SYSTEM_ITEMS_B, COLUMN BOM_ITEM_TYPE.
    BOM_ITEM_TYPE = 1 (Model)
    = 2 (Option Class)
    = 3 (Planning)
    = 4 (Standard )
    So if BOM_ITEM_TYPE 1 means it is configurable. & 4 means it can be used as raw material as well as individual product ex. keyboard.

  • Raw material stock in WIP

    Dear experts
    I have given raw materials to production so now the raw materials in under W I P. After two days i will receive Finished Goods mean while i want to capture raw materials  stock.
    How to do it ?  even it can be report.
    regards

    Hi,
    In SAP B1 there are is no predefined report for WIP, yiou have to design a custom report for the same.
    Even we had the same issue and we have developed our own report in Crystal reports and integrated it.
    I can help you with the report....

  • Raw  material stock report with vendor wise

    Dear all ,
    Can any one tell me , How do I get stock report only on " VENDOR " wise .
    The purpose is , I've multiple souces for one Material , I need analyse the available inventory with vendor wise.
    Pl.s help
    Thanks in Advance
    Sekhar

    Hi,
    1. Once you receive the mateiral inside the plant the identity of vendor is lost.
    2. All the stock will get as Plant / Sloc Stock only.
    3. Incase if you need vendor wise stock then you need to activate batch management, with Classification view and one characteristics as vendor.
    4. And during each GR  you need to enter the vendor value
    Else you will not be able to seggregate the available stock vendor wise.
    reg
    dsk

  • Material variant not found when configuring an item on a sales order...

    My client has been using Configurable Materials and Material Variants for several years.  At times, when entering a sales order on a Configurable material, the Material Variant is NOT displayed, even though the values entered for characteristics exactly match that of a Variant. 
    I suspect that the "link" between the Configurable material and the Material Variant has been broken, perhaps due to changes made to one of the material masters.  I've found that I can restore this "link" by changing the configuration of the Material Variant (MM02 transaction, the MRP3 tab, "Configure variant" button).
    (1) Can you tell me under what circumstances the "link" between Configurable and Variant gets broken?  In other words, are there certain fields on the Material master which, when changed, break this link?  If so, which fields?
    (2) Can you tell me how to identify those Material Variants which have a broken "link" (eg, those which do not link back to a Configurable material, for sales order entry purposes)?  Is there an ABAP or such to restore all such broken links?

    Hello and thanks for your response.  I've searched OSS and had found several informative notes (900732, 774346), though none seem to deal with my problem.  If you know of a note I'd much appreciate the lead...   (:

  • Material Ledger - Not Distributed when use MR22

    Dear All
    I do follow step and i have a problem which need your help
    1. Create a Mew Materail, price determination: 3 - Single/Multi level
    2. GR with Mvt 561.
    3. Using MR22 to update valuae for that material.
    4. Run CKMLCP -->
    I have 2 question
    1. When I run CKM3, I saw quantity in the Consumption Group with negative quantity. I don't know why, because I do GR, not do GI
    2. After run CKMLCP, I saw a not distributed line.
    I aldready config PRDs,
    Please help me solve that problem.
    Thanks
    QuangDD

    Hello Quang,
    First of all, do you have any consumption for your material in CKM3?
    CKMLCP would not distribute anything if there is no consumption in the material.
    The "not distributed" lines are due to 4 different causes explained in SAP Note 908776.
    I think your problem though, is that you have an MR22 posting and there is no consumption to apply that variance to.
    Hope it helps
    Javier

  • Sale Order quantity,amount not reduce when raised 1st partialy AR invoice

    Help needed,
    Please can anyone help .. I came with case that our company policy is to raise Partial AR Invoice on single Sale order.
    When we generate 1st AR Invoice on Sale order and manually changed qty till this process ok. but when we select 2nd time to same SO , all rows came with same qty and amount when SO was generated.
    i need to reduce the amount and qty automatically when i raised 2nd partial invoice through AR invoice.
    i am new on this forum , please help me to solve this problem if there is any query,
    Thanks in advance.

    Dear Shafi ullah,
    This is difinetly  system bug, what is you SAP patch.
    try to run same senario with different patch
    And log raise support tiket to SAP.
    Regards
    MANGESH PAGDHARE

  • Material not reduced

    Dear all,
    The BOM for a certain material do not reduce the raw material even when its receipted. This has been happening for a while now.
    Please advice how do I fix this or is there any other way to resolve this?
    Thanks

    I think the issue is with my planning strategy.
    Whenever I receipt material in SAP, it the system is not reduced, it still shows the same amount of material.
    if item A is 90 and I receipt it, it will show 90 still even after receioted.
    Hope this is clear if not please advice

  • WM-PP Production supply quantity is not reduce after Confirmation and GRN

    HI
       Iam configured the WM-PP,  Against production i did material staging, TR-TO Process and Grn . But the raw material stock is not
      reduced from the Storage type 100. kindly suggest me where i missed the configuration...
      with regards
       dinesh

    Hi experts,
    Please provide your expert comments

  • WM-production order supply quantity is not reduced after confirmation,GRN

    Dear Gurus
                   i am configured the WM-PP , in the production order after material staging and TR-TO process , i did confirmed the
                   production order and GRN.  Raw material stock is not reduced from the storage type 100.... 
                   kindly, suggest me where i missed the configuration.
    BR
    DEVA

    Hi Ismini,
    For the first question, there could be several reasons, like for example, 13.1 is not week 4. So if the consumption parameters did not allow forward for at least around 7-10 days (to get to the date of the first day in week 4), then consumtion didn't take place. Another reason could be that you defined planning strategy 10 for the material AFTER the sales order was already created.
    Point 2: I really don't know he details of these LTP scenarios that you mention.
    Point 3: if it really is from 2007 I think that you can delete the PIR without fear.
    Regards,
    Mario

Maybe you are looking for