RBDMANI2 Idoc Reprocessing IDOC Failure Notification

Hi SAP Friends,
I developed an inbound interface for LIV electronic invoice(MIRO) with basic type INVOIC02. At present everything going smooth.
i scheduled a background job with the program RBDMANI2 to reprocess the failed IDOCS. i.e if any failed idocs required SAP side changes, users will complete the changes. Then the scheduled job will process the failed IDOC.
IDOC will process if corrected data is satisfying else IDOC will fail again with Status 51.
Now the failed IDOC notification we are not getting any notfication.
If IDOC is failing first time idoc failure notification will come. At that point Object Type IDOCINVOIC & Event INPUTERROROCCURREDMM is triggering.
When i am reprocessing through the scheduled job of program RBDMANI2 , i am not getting any failed notification.
Can anyone help me out where i am missing the event. i need to activate any other event linkage for the reprocessing.
I tried with SWELS, i did not get any event when i execting the program RBDMANI2.
Appreciate your help and valuable inputs.
Thanks & Regards,
Srinivas Bhavanam

Srinivas, per my understanding the failure event is only triggered once. You can attest this yourself by executing the associated workflow. If you select the process option and all errors were not addressed, the current work item remains active ; eventually the error message will be changed in case the IDOC is now failing for another reason. There is only one workflow instance for the same IDOC ; the failed batch processing does not generate any new workflow or IDOCs, it only updates the current instances (workflow) and add an entry to the IDOC status table (EDIDS)

Similar Messages

Outbound error IDoc reprocessing

I have a scenario like whenever an outbound idoc is in error status, should be able to correct the idoc n reprocess it.
Suppose outbound idoc is in status 02. System process code will notify the agent assigned in partner profile. When i execute the workitem and corrected the port and try to reprocess, this status is set to 30. My requirement is once i correct the port status should become 03. How do we acheive this ? (not through report rseout00 )
1. In general scenario how do we handle outbound error idocs?
2. Is system process codes are used only for notifications or error processing?
Inputs will be appreciated regd outbound error reprocessing .
Thanks.

Hi Indira,
1. In general scenario how do we handle outbound error idocs?
You can use transaction BD87 to monitor the IDoc statuses.
and use the following programs to reprocess outbound and inbound error IDoc(s).
RBDAGAI2 - Re-processing of IDocs after ALE Input Error
RBDAGAIE - Reprocessing of Edited IDocs
RBDAGAIN - Process Outbound IDocs with Errors Again
RBDAGAIP - New Posting of Partially Posted IDocs
RBDMANI2 - Manual Processing of IDocs: Post IDocs Not Yet Posted
RBDINPUT
2. Is system process codes are used only for notifications or error processing?
The process code ise used in both ALE and EDI framework to identify the function module or API (Application Programming Interface) to be invoked for subsequent processing. Inbound as well as outbound interfaces use process code but for different purposes. Outbound process codes are stored in table TEDE1, while inbound process codes are stored in TEDE2.
Hoep this will help.
Regards,
Ferry Lianto

Tracking IDOC reprocessing

I have developed a File to IDOC interface in PI/XI. The file I pick up will contain a list of invoices from a vendor system ,
that I convert into ACLPAY IDOCs and post invoices.
When the IDOCs are posted into our SAP system some of the IDOCs fail and some of them are successful.
At the end of a business day the user will execute txn we05 to see the status of the IDOCs that came in for that day.
If any of the IDOCs failed the user would use WE19 to correct the data and reprocess the IDOC again.
The problem is the old IDOC that came in still has a error status and the new IDOC created by modifying the old IDOC doesnu2019t have any reference to the older IDOC.
Is there a way to see if and IDOC was created by reprocessing an already existing IDOC?
Or is there a better method to handle my scenario?
Thanks
Siva

Hi siva,
there are different programs and t-codes available to reprocess the error Idocs
with out creating new idocs.
Program RBDMANI2 for status 51 & 52
Program RBDAPP01 for status 64 ,66
Program RBDAGAIE for status 32 and 69 (Edited IDocs)
Program RBDSYNER for status 26
BALE - ALE Distribution Administration
WE05 - IDoc overview
BD87 - Inbound IDoc reprocessing
BD88 - Outbound IDoc reprocessing
BDM2 - IDoc Trace
BDM7 - IDoc Audit Analysis
BD21 - Create IDocs from change pointers
SM58 - Schedule RFC Failures
Basic config for Distributed data:
BD64: Maintain a Distributed Model
BD82: Generate Partner Profile
BD64: Distribute the distribution Model
Programs
RBDMIDOC - Creating IDoc Type from Change Pointers
RSEOUT00 - Process all selected IDocs (EDI)
RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
RSARFCEX - Execute Calls Not Yet Executed
RBDMOIND - Status Conversion with Successful tRFC Execution
RBDMANIN - Start error handling for non-posted IDocs
RBDSTATE - Send Audit Confirmations
FOr testing you can use WE19.
Program RSEOUT00 for status 30
re-process IDocs failing in 29 status, use program RBDAGAIN.
transactions WEINBQUEUE and WEOUTQUEUE to control the individual queues
Prabhudas

Reprocessing Idoc's with 51 and 54 status.

Hi Gurus,
My client wants to reprocess Idocs with status 51 and 54 by Batch job.
Is there Any program which can reprocess both status 51 and 54.
After the Idocs get reprocessed it should update the Shipment end in the Shipment document.
Thanks in advance!!!
Regards,
Aslam

Hi,
program to reporcess depends on status. Run report RBDINPUT. Here when selecting status 51 you will be redirected to report RBDMANI2 (as stated by Génia). For status 54, you can reprocess idocs manually with tcode we19.
Regards,
JM

Reprocessing IDOCS with status 52

Hi all,
I facing a problem with IDOC status 52.
After correcting the error it had given, I want to reprocess it again.
Kindly tell me any report or transaction name for reprocessing IDOC with status 52.
Regards,
Rahul

Hi Rahul,
You can use the below Programs for IDocs Reprocessing:
RBDMANI2 : Reprocess Idocs manually
RBDMANIN : Posting of IDocs with Status 51
RBDMOIND : Outbound Idocs status 03->12
RSEOUT00 : For Processing 30 Status IDocs
RBDAPP01 : For Processing 64 Status IDocs
RBDAGAIN : Reprocess Incorrect Outbound IDocs
RBDAGAI2 : Reprocessing of IDocs after ALE Input Error
Regards
Aneesh.

Reprocessing IDocs

Hi All,
I have a requirement to reprocess the IDocs in background. For this I am running the standard report RBDAGAIE to reprocess the IDocs. Here first I am running my custom report and getting the list of IDoc that are failed with status 51 in a ALV grid. I edit the data of the fields which have to be changed and say Process. The data in the IDoc is changed and given to the standard report to process in the background.
But the IDocs are not reprocessed rather they failing again with the status 51. Later, on debugging the code I found out that the report RBDAGAIE is checking table EDIDC for the IDoc changed status 69 to reprocess. So, at this point the condition is failing and consequently the Idoc reprocessing is failing.
So is there any other standard report which reprocesses the IDocs?
Thanks in advance
Deepak

Hi Deepak,
The program to re-process the IDocs depends on the staus of the IDocs which you are supposed to re-process. Let me give you a few programs used to reprocess the Idocs based on theie current status.
Program RBDMANI2 for status 51
Program RBDAPP01 for status 64
Program RBDAGAIE for status 32 and 69 (Edited IDocs)
Program RBDSYNER for status 26
Program RSEOUT00 for status 30
and so on....
Would be better if you let know the status of the IDocs under concern that need to be reprocessed!
~ Bineah

Reprocess Idocs with status 3

Hi ,
I want to reprocess successful IDOCs with status 3 again,how can I do that?
I think logically we can change the status other than 3 and use BD 87 to reprocess them?is this correct way?Idoc numbers would change or they would create new IDOCs?
thank you,
Babu

Hi,
You can use transaction BD87 to monitor the IDoc statuses.
and use the following programs to reprocess outbound and inbound error IDoc(s).
RBDAGAI2 - Re-processing of IDocs after ALE Input Error
RBDAGAIE - Reprocessing of Edited IDocs
RBDAGAIN - Process Outbound IDocs with Errors Again
RBDAGAIP - New Posting of Partially Posted IDocs
RBDMANI2 - Manual Processing of IDocs: Post IDocs Not Yet Posted
RBDINPUT
<b>Reward points</b>
Regards

Reprocess Idocs

Hi,
To Reprocess Idocs in Outbound and Inbound, Should I use Tran: BD87 ?
What is use of this Report: RBDMANI2 ?
Thanks,
Srini

Hi,
Yes you have to use BD87 in order to reprocess the idocs.
Report rbdmani2 is used for manually processing the idocs.
But normally we use BD87 to reprocess the idocs as you have an option to select and reprocess the idocs from a list of idocs displayed. In the report you have to select the idocs yourself and reprocess it.
KR Jaideep,

IDOC monitor for shipping notification- EMASN

Hello experts,
Anybody know that is IDOC monitor for shipping notification-EMASN. what are the input we have to enter as defualt for this transaction.
can anybody help, very urgent.

I did not know about transaction VOFM (MAINTAIN Riquirements & Formulas), tab 'Data transfer' => 'Deliveries' .
Copy routine '301' to '931' and add thos line at the end:
likp-ntgew = xkomdlgn-ntgew_hdr.
likp-btgew = xkomdlgn-brgew_hdr.
likp-gewei = xkomdlgn-gewei_hdr.
likp-volum = xkomdlgn-volum_hdr.
likp-voleh = xkomdlgn-voleh_hdr.
Then go to VTLA ('Order to delivery copying control'), select your target (for instance 'EL' <= 'DL') and CtrlShiftF2 (Detail). Change the field Header data from '301' to our new '931'
Hope this is help someone one day,
Daniel
Edited by: Daniel Putzschler on Jan 20, 2011 2:17 PM

Idoc reprocessing in Custom program

I have a custom program which displays the IDoc data for the message type = ZSTLSP in the ALV format.
Requiremt is that I shall select a record and change one of the coulmn contents . A button 'Reprocess' will be
made available , when clicked it needs to reprocess the Idoc . The reprocessed idoc will be strored with the new values entered
and the original idoc will be stored with status 70.
Kindly let me know how to reporcess the IDoc in the custom program.
p.s.: Function module IDOC_INPUT does also reprocess ..but it does not disoplays the updated status.

Hello,
You may call standard program RBDAPP01 to reprocess the IDOCs using SUBMIT statement. Pass the IDOC Number, Message type etc. while submitting the program.
Thanks,
Venu

Idoc segment for shpmnt notification for idoc type shpmnt02

Hi gurus,
I have to find the idoc segment for shipment notification,idoc type which we are going to use is shpmnt02 or shpmnt01,Can any one of you please tell me the idoc segments for this idoc type with fields and table name?.Thanks in advance.

Hi Nagarathinam
You can use transaction WE60 for documentation on IDOCs
Best regards,
Chris

Idoc reprocess issue

Hi,
I have a problem with idoc reprocessing .An idoc contains the date field which shows the system date.I t always shows the default system date as Thursday.
But when we reprocess some idocs ...they are not showing the default system date (Thurs day) showing the current date .
Pls advice.
Regards,
Somenath

hi
use
report RBDAPP01
to change status from 51(application document not posted)
to 53(application document posted)
reward for use ful points
regards
Nagesh.Paruchuri

Issues with Reprocess Idoc

Hi all,
The developement for BOM interface is done.
it is working fine.But my client extented requirement like this
after processing IDOC , if there is any status 51 idocs available.
he will do reprocess from BD87. that time some part of code in FM needs to be triggered.
I am not able make Difference b/w first IDOC number and Reprocess IDoc number.
means for keeping conditon , i need one unique differenet between new IDOC and Reprocess IDOC.
Is there any point to know that properties.
thanks in Advance,
regards,
JBR

Hi,
Reprocessing a idoc would not create a new IDoc, only the status of the IDoc would be changed if the error with which it was already occuring has been modified.
Thanks
Krithika

Idoc reprocess status 03

hello
i need to reprocess idocs in status 03 through bd87
but it is not allowing
please help

Hi Manu,
Looks like you are trying to reprocess the IDOC which is already processed correctly.
Unfortunately there is no way by which you can do it.
I can give you a work around though:
1) Go to WE19 enter your IDOC number which already has status 03 and execute.
2) On next screen it will display the IDOC, choose approporate button on toolbar (standard Function Module) to process it.
3) This will generate the new IDOC similar to the one which was posted completely.
4) Now the new IDOC should have status ready (Unless you have clicked Process Immediately in WE21 for this message type, it shud be execute by Background Job).
This approch is applicable for testing.
Let me know if it solves your query.
Regards
Shital

Reprocessing IDOC with status 52

Hi,
I got status 52 for one of the IDOCs, I want to reprocess it . When I use BD87 & BD73, those are not working.
Please tell me any other way to process it.
Thanks & Regards
Vijay

Hi..Vijay,
There are already many threads with the same question.
pls search for your query before posting.
Eg:
Re: Idoc status 52 -> How to make it green i.e. 53
Reprocessing IDOCS with status 52
regards,
Padma

RBDMANI2 Idoc Reprocessing IDOC Failure Notification

Similar Messages

Maybe you are looking for