RDBMS installation: new group or existing group?

Hello,
currently we are installing Oracle 11gR2 on several new standalone servers. As suggested by Oracle, we create the user oracle as a member of the group oinstall. So far, so good...
But we are have a couple of older servers with already existing Oracle rdbms installations - and these were created with the user oracle but as a member of the group dba.
Now we want to install 11gR2 onto one of those older servers and are not really sure, if:
- we should create a new group oinstall and install 11gR2 with this group
- we should install 11gR2 with the group dba
If you look into the filesystem, Oracl 9i is installed under /opt/oracle/app/oracle/product/
drwxr-xr-x 13 oracle dba 1024 Sep 19 08:47 product
11gR2 will get installed under /u01/app/oracle/product/11.2.0.3 and could look like either
drwxr-xr-x 13 oracle dba 1024 Jan 18 08:47 11.2.0.3
or
drwxr-xr-x 13 oracle oinstall 1024 Jan 18 08:47 11.2.0.3
The question is, if a mix of groups is possible or if it makes more sense to keep the old group dba...
Any help will be appreciated...
Rgds
JH

Hi;
For our installation we always use dba group,because we have more than 300 db. Oracle recommended to use different group for security,manage etc. But If you have case like us We prefer to go wiht single group
You can see more details in installation guide
Regard
Helios

Similar Messages

HT2486 how do I copy an existing Group in Contacts to create a new group with the same contacts in it?

How do I copy an existing group in Contacts to create a new group with the same contacts in it?

Hi there,
Unfortunately the use case you describe hasn't been implemented in Firefox. It's not possible to move a tab group out to its own window at this point. Generally the tab groups feature hasn't been worked on much recently, not sure why.
As to TabMixPlus, that's a third-party add-on which Mozilla doesn't directly support. You can find support links from the add-on page: https://addons.mozilla.org/en-us/firefox/addon/tab-mix-plus/
Hope this helps.
Cheers,
David

HT5760 New group being created everytime someone responds to our existing group message.

I have a group message with 8 people in it. We all have iPhones and the new iOS8 software. Once we got the new software someone renamed the group. Ever since the update, randomly it will happen that when someone responds in the group... instead of the response showing up in the group we already have... it creates a new group with all the same people. This does not happen every time it is random. This is very frustrating, someone please help!

Hi Leela,
Are you creating sales order in the same system like
You have created table in Development system in same system your are creating sales order
If you are creating here you just go to V/07 transaction then slect your access sequence go in to the tables detail screen here you select your table 953 then click on fields here you check all the fields are available correctly or not then save the changes.
Now try
or
You transported these confugaration to other system like Quality or Production here and you are creating the sales order,
If you are creating here you need to create condition table again then try.
I hope it will help you,
Regards,
Murali.

How to add new group entry in Cisco Vpn using powershell

I am working on a powershell script to connect cisco vpn using powershell, I am able to connect to vpn but not sure how to add new group to vpn. I am using the following script$vpn_profile = 'Test'
$username = 'TestUser'
$userPassword = ConvertTo-SecureString -String "Password" -AsPlainText -Force
$credentials = new-object -typename System.Management.Automation.PSCredential -argumentlist
$username,$userPassword
$password = $credentials.GetNetworkCredential().Password
Set-Location 'c:\Program Files (x86)\Cisco Systems\VPN Client'
.\vpnclient.exe connect $vpn_profile user $username pwd $password
Write-Host "You Are Connected"
cd "C:\"

Have you entered .\vpnclient.exe /? to see if it will return information about other switches you can use with this executable? Other than connect, I was able to track down a few without actually having the executable (http://www.scribd.com/doc/40108893/Cisco-VPN-Client-Command-Line).
That said, I do not believe that there is a switch that will help you create a connection. These are either done manually through the GUI, or can be likely be added by supplying a properly formatted file in the proper place.
If you're using the version of the Cisco VPN client I think you are, then your connection settings, or profiles, are stored in individual .pcf files somewhere on your computer (likely in the Cisco directory). These are simple, text-based files. Find one
on your computer, save it with another name, and then modify it manually. If you really want to use PowerShell, then use this opportunity to learn how to create and edit basic text files using PowerShell. If you have a standard connection file, then you can
put that file onto remote computers any number of ways. If a .pcf file exists in the proper place when the VPN client is opened, then it likely will not prompt for a new connection.
Update: Added more info; clarified

Adding new groups

I was unable to find a viable solution to this without having to use OS X Server tools. I would like to create a user group so that I can make sure that certain users on my system will have access to the same folders, but restrict access to those folders for anyone else who is not a member of that group. However, I am unable to find an easy way to create the user group. Any answers?

Courtney,
You could use the ServerAdmin Utility as Biovisier has suggested, but it is certainly not necessary. Netinfo Manager is the only thing you need.
For many, the easiest way to create a new, custom group is to duplicate and existing one, then modify the new group's properties. The "admin" group is usually the best choice for a template. When making any changes to the Netinfo Database, it is prudent to make a backup of the original first!!
Select the admin group, then click the "Duplicate" button at the top of the window. In the "properties" pane at the bottom of the window, the "name" property for the new group should be highlighted for editing. Just type your desired name.
Each group needs to have a unique "GID." GIDs 0-100 are reserved for "system groups," and OS X uses 501 and up for users. So, your best bet is to follow (pretty much) standard practice and use 201- 300 for custom-created groups.
For a custom-created group, the "realname," "generated_uid" and "smb_uid" properties are not needed. Just select these properties and click the "Delete" button. You should now have only the "users," "name," "password," and "gid" properties. The only thing left to do is to modify the "users" property.
Click the "disclosure triangle" next to "users" to reveal the complete list. First, remove any unwanted users by selecting them, then clicking the "Delete" button. Next, add users by selecting the "users" property and choosing Directory>Insert Value. A new user will be added to the list with the username value highlighted. Type the short name for an existing user to add that user to the list.
The "password" property should remain in place, and should have a value of "*" (asterisk). This means that there is, in effect, no password for the group. Leave this property and value alone.
When you have finished setting up your group, choose Domain>Save changes and confirm to "update this copy," if asked (Netinfo has become pretty smart about confirming and saving changes as they are made, so most or all of this shouldn't be necessary).
Scott

Channels created in New groups

Hi There,
I am having some issues during the creation of Channels. I have a module which creates few channels in the data portal. All these channels are to be created in the First group alone(there would be only one group in the portal). I dont no issues as long as they ran in my system but for testing when I run the same scripts in another system few channels gets created in a new group though I have assigned proper inputs to ChnAlloc command giving the target group index as 1. I tried looking into the settings also transported the DDD file of my system to the testing system, but dint help me.
Can you please let me know why is this happening, why I am not able to get those channels in the existing group and is getting created in a new group?
Waiting for your response at the earliest.
Thanks,
Priya

Hi Priya,
Now I understand. In DIAdem 9.1 we allowed implicit creation of new Groups when the Group name passed to ChnAlloc() included the construction "GroupName/ChannelName". This lead to confusion of the sort you described, and this no longer happens in DIAdem 10. You can get around this by using any character other than "/" (for instance "Data Time\Sec" or "Data Time [Sec]"). I'd would also encourage you to put the unit information in the unit property of the channel using ChnDim() instead of in the channel name.
The "/" character continues to be a disallowed character in both Group names and Channel names in DIAdem 10, so you need to think of some other way to name your Groups and Channels.
Ask if you still have trouble with this,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Scritps to create new group in portal

Hi, anyone knows where can i get a script to create new groups in portal?
I found very good script on Metalink doc.id. 258751.1 for creating users. Does exist something like that but for groups?
Thanks.

Yes we have build a set of API's to create groups, add members to groups etc using wwsec_api.If you need further details post your email id and can provide additional details.

Cant sync NEW group in Address Book to Itunes

So here is my delema. I got a new Iphone (From BB), and instead of typing with my thumbs to insert all my old contacts, i opened address book on my macbook pro running Lion and firstly created a new group, then started adding and creating new contacts within that new group. Once finished, i opened Itunes and it does not recognize the new group and i can not sync my new entries to my phone. Even tho when i check all contacts in Address book it shows my new entries, its almost like they don't exist. Also if i check import ALL contacts in Itunes it also does not import the new entries. Like i said, in theory they are in Address book, but not recognizable???
Very frustraing. Any suggestions.

Oh flip what did i do.
So i followed the instructions from that link. I re did my address book. That did not seem to work. So i reset my sync folder by copying and pasting the recomended path into the moniter. now when i go to itunes and try and sync my contacts absolutly nothing goes onto my phone.
I am so frustrated and now a little worried.
Sound familiar at all???

WSUS Client delayed update detection after assigned to new group

Hello, fellow forum dwellers,
I'm experiencing some issues with my WSUS Client Management and couldn't find any answer in the library or forums. Thus I decided to write here:
Issue
When registering a new computer with WSUS and assigning a group, the updates, that have been assigned to that group aren't released to the Computer (searching will only yield the list available to the default group). After some hours (I'm currently trying
to measure just how many) suddenly the updates will become available as intended.
Why does it bother me?
That wouldn't bother me all that much for permanent clients (Using the term "client" to refer to WSUS client, independently of the actual OS type), however much of our work is spent rolling out devices to customers (who ought to receive them fully
updated). Completely non-uniform, preinstalled but non-updated hardware and OS rule out preupdated installation images unfortunately. This is putting a significant delay in our time spent on each individual device (and is sometimes putting a serious bottleneck
in our operation).
Infrastructure:
WSUS OS: Windows Server 2003 R2
WSUS Version: 3.2.7600.226
Computer-Folder Assignment: Serverside
Client-Configuration: Registry Modification (Clients are not domain members, settings are applied via Powershell Script)
Client OS: Windows 7, 8, 8.1, 2008 R2, SBS 2011, 2012
Client OS Architecture: x64 & x86
Localization: All clients & WSUS have uniform timezone and language
Any insights and help welcome :)
Cheers and thanks in advance,
Fred
There's no place like 127.0.0.1

Hello, fellow forum dwellers,
I'm experiencing some issues with my WSUS Client Management and couldn't find any answer in the library or forums. Thus I decided to write here:
Issue
When registering a new computer with WSUS and assigning a group, the updates, that have been assigned to that group aren't released to the Computer (searching will only yield the list available to the default group). After some hours (I'm currently trying
to measure just how many) suddenly the updates will become available as intended.
Why does it bother me?
That wouldn't bother me all that much for permanent clients (Using the term "client" to refer to WSUS client, independently of the actual OS type), however much of our work is spent rolling out devices to customers (who ought to receive them fully updated).
Completely non-uniform, preinstalled but non-updated hardware and OS rule out preupdated installation images unfortunately. This is putting a significant delay in our time spent on each individual device (and is sometimes putting a serious bottleneck in our
operation).
Infrastructure:
WSUS OS: Windows Server 2003 R2
WSUS Version: 3.2.7600.226
Computer-Folder Assignment: Serverside
Client-Configuration: Registry Modification (Clients are not domain members, settings are applied via Powershell Script)
Client OS: Windows 7, 8, 8.1, 2008 R2, SBS 2011, 2012
Client OS Architecture: x64 & x86
Localization: All clients & WSUS have uniform timezone and language
Any insights and help welcome :)
Cheers and thanks in advance,
Fred
There's no place like 127.0.0.1
After adding the computers to the group to get WSUS to recognize the new group you need to run the command on the client
wuauclt.exe /detectnow /resetauthorization
The /resetauthorization part is the one that makes sure the client checks to see which group it belongs to in WSUS.
The delay you are experiencing is the amount to time the client takes to "check in" with WSUS.
Hope this helps.

New Group Membership for users

Hello All,
Is there a way to add members based on their employee type to a new group without writing a program??
For ex: if employee type is Part-Time, then add to a Part-time group in OIM.
We need to do this for new users and also for existing users.
We have the code to do this task, but I want to make sure if we can do it via configuration in OIM admin console or design console.
Thanks u ll in advance.
Regards,
~VSN

If this is just OIM Groups we are talking about then why reach up to the Access Policies
- Create membership rules via Design Console -> Rule Designer as follows:
- Name=Sample Membership, Type=General, Description=Sample
Role == Part-Time
- Go to your group in OIM and add this to Membership Rules drop-down
For existing users, do it though a scheduler and use the same Java code which you have currently in place

News group for Oracle certification....

Which is the best news group for Oracle certification?
I have extensive knowledge and work experience in other RDBMS products. I do database applications for web/desktops. With these experiences which is the best Oracle certification exam for me? I want to do atleast one certification in Oracle.
Thank you,
Smith

Umm, sorry to be so condescending but have you heard of Google?
http://groups.google.com/groups?q=oracle%20certification
Cheers,
Colin

Three new groups in Open Directory Server

I noticed that my Open Directory server has three new groups in WGM,OD Users, OD Administators and com.apple.limited_admin. Should I treat these as I treated the other groups by assigning them members and group folders? I also noticed that now I have a System Administrator and a Directory Adminstrator, does that sound right? Should I keep both? Thanks

Ok, thanks, I had forgoten the "show system records" trick.
For the guest user, I don't see it in dscl.
So I suppose it's not a user, just an "anonymous" authentication option in the sharing preferences.
It's a bit like "others" in the posix rights permissions : User, group, other. User and group are existing and named, other are not named, it's just anybody that is not the named user and not a member of the named group.
To keep things understandable, you should use an other name if you wish to configure a "guest user"
You can manage the "enable guest account" option from WGM if you select a computergroup, in the preferences pane / login / options.
Hope it helps
Nicolas

In contacts section for the groups section i want to delete old groups i have on the phone and then add a new group for easy access for work contacts for calling. rather then searching each individual contact when needed. is this possible?

i currently have about 6 different groups listed on the iphone in my contact list section and i want to delete the old ones and create a new group for work puposes!
i dont want any apps all i want is something similar to my favourites list but in a group so i can just go into that work group and scroll to the person i need to call and this way seperating my personal and work contacts.
because i do alot of calls from my car i dont want to have to search my contact lists to find the right person i just want them all in a simple folder.
is this possible because if i already have groups on my iphone i should be able to delete the old ones and create a new one?

Deleting groups on the phone and creating new ones is not supported with iOS4, you'll have to do that on your computer and sync again.
Let's see if they changed that in iOS5 when it is released.

I have created a group in my address book, but when I try to use it to send out a group email, only a comma shows up. How do I send out an email using my new group contact list?

I have created a group in my address book, but when I try to use it to send mail, only a comma shows up. How can I send mail using my new group? I have an IMac with OSLion.

I will agree with you on this one. Version 31 and all the fixes so far are a mess. Since I have been here answering questions for a little more than a year now I have learned to wait to upgrade until all the dust settles. I see no end to the dust storm version 31 has caused. I am still on version 24.6 and plan on staying there for the duration. At least until the developers comes to their senses and put out a working product.

In address book how do I move all cards from my 'last import' smart group into a new group?

In Address Book, how do I move all cards from my 'last import' smart group into a new group that I will create? So far I am not being allowed to Edit Smart Group!
Thank you x

Simon
You’re going to have a very big problem and very soon. These missing pics are the beginning of trouble.
the total size of all my folders on my 60gb internal drive is 46.5 gb, yet only 1.9 gb is available,
OS X needs about 10 gigs of free space on the hard drive for normal OS operations such as virtual memory and temporary files. Without this space the machine slows down as the OS hunts for free space, files become fragmented and applications begin to crash. The risk of data corruption increases exponentially.
You must, as a matter of urgency, make space on the drive. I cannot stress this enough.
You may be able to recover the pics from your camera card using an app such as MediaRecover
Regards
TD

RDBMS installation: new group or existing group?

Similar Messages

Maybe you are looking for