HT5760 New group being created everytime someone responds to our existing group message.

I have a group message with 8 people in it. We all have iPhones and the new iOS8 software. Once we got the new software someone renamed the group. Ever since the update, randomly it will happen that when someone responds in the group... instead of the response showing up in the group we already have... it creates a new group with all the same people. This does not happen every time it is random. This is very frustrating, someone please help!

Hi Leela,
Are you creating sales order in the same system like
You have created table in Development system in same system your are creating sales order
If you are creating here you just go to V/07 transaction then slect your access sequence go in to the tables detail screen here you select your table 953 then click on fields here you check all the fields are available correctly or not then save the changes.
Now try
or
You transported these confugaration to other system like Quality or Production here and you are creating the sales order,
If you are creating here you need to create condition table again then try.
I hope it will help you,
Regards,
Murali.

Similar Messages

  • A new row being created while Editing the existing one.

    Hi All,
    I have a custom page, where i need to edit the existing Data. I have initialized my EOVO in PR. There is also a Lov which is used to search the existing data. Then i edit the field and Save it. Everything works fine and the existing row is being updated. But there creates a new row also with only one field is being populated which is the attribute which i have set on my LOV.
    how can i stop this new row from being created.

    Hi,
    Close your previous thread's if answered. One of which is
    Explicitly setting the value in my MessageChoice & MessageTextInput
    Regards,
    Anand

  • How can I prevent a new tab being created every time I hit the Home Key in Firefox 4?

    I recently installed Firefox 4. I have it set to open two tabs, Google and Yahoo, for my homepage. When I open a new site in either of them the tab assumes the name of the new site. At the end of my search I hit the Home Key to return to my two original tabs. My two original tabs appear, but so does an additional tab...a duplicate of one of the original two. Each time I hit the Home Key another tab is created. This is annoying and I would like to know how to prevent it from happening. Thanks.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • New folders being created... Not by me

    How can I stop iTunes from automatically changing the way I organize my folders. For example, I ripped a Johnny Cash greatest hits CD. I edited the songs in the folder and on iTunes to only say Johnny Cash as the artist, instead of Johnny Cash w/ June Carter. But anytime I update my library, it changes it all back and is very annoying and cumbersome to change all my folders back. I checked out the preferences part of iTunes and didnt see anything there to help, maybe I looked over it. Help!
    Thanks!

    Create a new folder on Desktop, open it, CMD+J, set it up the way you want: list view, click on name column, deselect size, click on always open in list view, etc., then click on Use as Defaults. OPTION-click and hold the Finder's Dock icon and select Relaunch. Create a new folder and open it. It should have those settings you just made.

  • New Layer Being Created When Timeline Effect Added

    I am working on a Flash file in which I am adding a Timeline
    Effect (5 frame fade out). Recently, instead of the transition
    being applied to the layer, in the frame length specified, Flash
    adds another layer with the standard 30 frames and it deletes the
    content from the 5 frames where I'm trying to add the fade out. It
    doesn't always do this. I had already successfully created a couple
    of fade-ins at the beginning of the timeline, but once it starts
    adding and deleting this stuff, it never goes back to normal. On
    the layer in question, I have a keyframe with a graphic, the
    graphic is stationary for 20 frames, then I inserted another
    keyframe and tried to apply the Timeline Effect beginning there.
    Help!!

    Change contentDelivery* of the popup to lazyUncached*. Default is lazy .Refer
    http://docs.oracle.com/cd/E21764_01/apirefs.1111/e12419/tagdoc/af_popup.html
    Also in addition , you might need to refresh the region (try the above standalone 1st) when you invoke the popup. Use refresh="ifNeeded" in the taskFlowBinding alongwith change of some input param . See why and more here
    http://www.adftips.com/2010/11/adf-ui-region-interaction-interaction.html
    Example simialr to your usecase here -
    http://www.oracle.com/technetwork/developer-tools/adf/learnmore/53-taskflow-in-popup-169196.pdf
    Edited by: Sudipto Desmukh on May 9, 2012 5:20 PM

  • PDK portlet. New session being created.

    Hi,
    I have an existing struts/BC4J based application which runs fine
    local as webapplication. After portletizing it with PDK and deploying
    it to portal for some strange reason a new http session is created a few
    steps into the application resulting in losing the existing session data.
    I thought of switching to using portlet provider session but this is just
    stored in the http session object.
    Anybody experienced this problem as well ?.
    Thanks,
    Kenneth

    Hi Natalie,
    I'm more maintaining/finishing an existing application. So I didn't develop it initially.
    The version or oracle portal we're using is 9.0.4.1.0. As for portletizing a struts application, oracle pdk has been used. Instructions for portletizing a web app can be found in "Oracle Application Server Portal Handbook". Further you have to replace struts-html:form tags in your JSPs with pdk-struts-html:form tags.
    Some tips can be found here.
    http://www.it-eye.nl/weblog/2005/07/13/easy-publishing-of-a-struts-application-as-a-portlet-in-oracle-portal/
    As for losing session I post to a servlet from struts/jsp page which writes pdf to the output stream Running in local container it works fine. However when running in portal I lose the session before hitting the servlet. I notice at various other times that session is lost for no apparant reason.
    HTH
    Kenneth

  • How do I stop dulicate contacts being created everytime I sync with Goggle?

    Hi Everybody,
         Newbie to this forum so bear with me.
         I started with no contacts on Google and 84 on my iPhone4 16GB. Sync'd with Google, after two sysncs I have 207 contacts on the iPhone and Google, most of which are dulicates of the original 84.
    NOTE: I did not edit any contacts between syncs.
    NOTE: 207 is not a multiple of 84, each time I sync, certain of the contacts are duplicated, not all of them. I have one contact that is just a name, no other information. It has been duplicated every sync.
    I am syncing to Google via iTunes (10.3.1.55) on a Windows XP (Service Pack 3) laptop.
         Sincerely R A Evans
    P.S I don't know how to find the OS on the iPhone. It's brand new though.

    deselect what you don't want on your iDevice in iTunes. more information here.

  • Trigger a event and send an email  when a new entry is created in a table

    Hi All,
                I have scenario here where i want to trigger a event and send an email too when a new entry is created in a Ztable or an existing entry is changed.
    Please let me know how can i achieve this.
    Please excuse me if you find it basic as I am not very old in Workflows.
    Thanks in Advance,
    Saket.

    Hi..
    For your Requirement workflow not Required.
    Write a  Program to send Mail. This Program has to execute when ever the Save Button is Click, then the mail will be sent.
    Check the program in this [link|https://wiki.sdn.sap.com/wiki/x/nYKdAw ], which send the mail.
    Regards,
    Surjith

  • Accounts being created with administrative group rights

    Hello,
    The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes.  It runs Hsphere control panel.  I am trying to identify how the following hack is happening. 
    1) There are users being created with Administrative group rights.   Below is the EventViewer log for the user creation:
    User Account Created:
         New Account Name:    username
         New Domain:    PCNAME
         New Account ID:    PCNAME\username
         Caller User Name:    PCNAME$
         Caller Domain:    DOMAINNAME
         Caller Logon ID:    (0x0,0x3E7)
         Privileges        -
     Attributes:
         Sam Account Name:    username
         Display Name:    <value not set>
         User Principal Name:    -
         Home Directory:    <value not set>
         Home Drive:    <value not set>
         Script Path:    <value not set>
         Profile Path:    <value not set>
         User Workstations:    <value not set>
         Password Last Set:    <never>
         Account Expires:    <never>
         Primary Group ID:    513
         AllowedToDelegateTo:    -
         Old UAC Value:    0x2DAB2B0
         New UAC Value:    0x2DAB2B0
         User Account Control:    -
         User Parameters:    <value not set>
         Sid History:    -
         Logon Hours:    <value changed, but not displayed>
    There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
    2) I tried to identify what Caller Logon ID:    (0x0,0x3E7) means.  I found out from here:
     http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
    Output from LogonSessions.exe is pasted below (snippet):
    [0] Logon session 00000000:000003e7:
        User name:    DOMAINNAME\PCNAME$
        Auth package: NTLM
        Logon type:   (none)
        Session:      0
        Sid:          S-1-5-18
        Logon time:   9/11/2014 12:41:53 PM
        Logon server:
        DNS Domain:   
        UPN:          
            4: System
          316: smss.exe
          364: csrss.exe
          392: winlogon.exe
          440: services.exe
          452: lsass.exe
          628: svchost.exe
          756: LMAgent.exe
          840: svchost.exe
         1000: spoolsv.exe
         1252: avagent.exe
         1268: camWMIAgent.exe
         1324: cissesrv.exe
         1380: cpqrcmc.exe
         1404: vcagent.exe
         1440: svchost.exe
         1480: HsQuotas.exe
         1740: inetinfo.exe
         1780: EmailAgent.exe
         1856: snmp.exe
         1884: sysdown.exe
         1920: smhstart.exe
         2192: svchost.exe
         2388: cmd.exe
         2396: hpsmhd.exe
         2444: cqmgserv.exe
         2464: cqmgstor.exe
         2484: HSphere.exe
         2596: wmiprvse.exe
         2676: cmd.exe
         2684: rotatelogs.exe
         2692: cmd.exe
         2700: rotatelogs.exe
         2732: searchindexer.exe
         2812: hpsmhd.exe
         2824: cqmghost.exe
         2852: svchost.exe
         3044: cmd.exe
         3052: rotatelogs.exe
         3080: cmd.exe
         3088: rotatelogs.exe
         5452: svchost.exe
         5596: GravitixService.exe
         7392: csrss.exe
         7232: winlogon.exe
         6888: csrss.exe
         9832: winlogon.exe
        10388: wawrapper.exe
        10352: cpqnimgt.exe
         9496: msiexec.exe
         6068: w3wp.exe
         4748: webalizer.exe
    3) I also learned from http://support.microsoft.com/kb/243330/en-us that   Sid:          S-1-5-18 means:
    SID: S-1-5-18
    Name: Local System
    Description: A service account that is used by the operating system
    That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
    I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
    The server is fully patched and it is running Lumension security product.  What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
    Hope someone with advanced admin skills can advise.
    Thank you

    Hi,
    You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
    In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group.  So no users with Administrative group should be ever created.  If this happens,
    it constitutes a breach of server security=positive hacking attempt.
    >how in the world users are being created and then being assigned administrative group rights.
    In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
    I want to be able to understand in full how/what process is allowing users to be created with Admin rights.  In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
    it so that we can patch this particular hole.
    Best Regards,
    Amy

  • I just created a new profile/user on my MacBook Pro. My pointer/mouse. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. Mouse moves but will not click. Already tried restarting and the pram zap.

    I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly.  Should I just delete the new profile and try again?

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • A group of folders is being created inside of Movies?

    I keep finding folders being created inside the movies folder.  The title is ( A Document Being Saved By StompUtil) with the titled being incremented with each new one.  I now have 3 of them.
    What is going on here?

    I keep finding folders being created inside the movies folder.  The title is ( A Document Being Saved By StompUtil) with the titled being incremented with each new one.  I now have 3 of them.
    What is going on here?

  • Group Folders not being created

    Hi folks,
    i think this is a simple question: i got Mac OS X 10.4.4 Server with OD and Mobile Homes configured. I set up some custom Groups but the Group Folders are not being created automatically. I think there is a terminal command to do this. Does anyone know that command?
    Greets

    Is it the CreateGroupFolder command?
    (15297)

  • Auto Save folder not being created with new project

    Just recently I've noticed that when I start a new project there is no auto save folder being created.  I have all preferences the same (auto save every 10 min with a max of 50 and save next to project files).  I have no idea why this started or what I can do to fix it. 

    So it seems to be working now.  I went back through other projects that have been open for some time and the most recent auto save file I could find for any of them was from Oct. 8th.  So auto save hasn't been working at all.  What I did was go into preferences and change the interval a little and the frequency from where I had had it since intial set up.  That seemed to have told it to turn it back on for some reason.  It's really weird.  I guess I'll just keep an eye on it, but people may want to check there folders just in case the same issue is happening.  I didn't realize it until today and it's been happening for a couple of weeks apparently. 

  • HT2486 how do I copy an existing Group in Contacts to create a new group with the same contacts in it?

    How do I copy an existing group in Contacts to create a new group with the same contacts in it?

    Hi there,
    Unfortunately the use case you describe hasn't been implemented in Firefox. It's not possible to move a tab group out to its own window at this point. Generally the tab groups feature hasn't been worked on much recently, not sure why.
    As to TabMixPlus, that's a third-party add-on which Mozilla doesn't directly support. You can find support links from the add-on page: https://addons.mozilla.org/en-us/firefox/addon/tab-mix-plus/
    Hope this helps.
    Cheers,
    David

  • Group Wikis not being created

    Hi,
    I've got a new server running 10.5.3 Server.
    I create a group in WM and select all of the services (Mailing list, Wiki, Blog, etc) and the group is created no problem. However, no wiki is created for the group.
    I've looked in /Library/Collaboration/Groups and no folders exist for the new groups. Old ones exist from when the server was administered in Standard Mode but it is now running in Advanced Mode.
    Permissions are as they were out of the box:
    _teamserver rw
    What do I need to do in order to create the folders? Has something broken during the conversion from standard to advanced?
    Cheers,
    StuG

    Hi Stu,
    Make sure your in Workgroup Manager, select the Group and under Basic, check enabling following services. The dropdown box should have your server's ip address. Also make sure the appropriate checkboxes are marked for wiki and blog.
    Once you've created the group, you need to open Terminal and type sudo CreateGroupFolder and enter your root password (usually the first account on the server like ladmin). You should see a message stating the Group folders are created in /Library/Collaboration/Groups/<groupname>.
    Executing the command in Terminal creates the necessary wiki, blog files. Go to Server Admin, under Services...Web...Sites tab...Web Services. Select your website and make sure Services for Group...wiki and blog is checked. Make sure a user or group is selected with permission to create (edit) wiki/blog and click save.
    If your wiki stops working for any reason (disabled on you home page) remember to reset the permissions from terminal: sudo chown -R 94:94 /Library/Collaboration/
    The 94:94 sets the permissions to the teamsserver account which the wikis need to operate. Hope this helps.

Maybe you are looking for