RDS thru Solaris 9 and CF7

I'm using CF7 under Solaris 9 with Acache 2.0.X, I can log
into the CF admin but cannot get to RDS. I researched this all over
for several days not without any success. THe Web.XML is is fine,
and enabled. But connecting through Dreamweaver or CF Studio is
unsuccessful. I am getting a 407 error which indicates proxy
authentication, _Has anyone succeeded in connecting thru RDS with
Solaris?

And anyway if you use a Solaris8 DCA that works the samem, since they are not much changes in hardware support for x86, and the important thing is to use further a Solaris 9 Cd to install.
By the way these IBM x86 boxes (300 an NetVista series from a pair of years ago) are a pain,they don't support el-torito, even with the more recent bios.

Similar Messages

Why difference in Solaris and Linux

Hi,
The following program is giving results diferently when I am executing using g++ compiler in Solaris and Linux.
Why it is so.
here is the code:
#include <stdio.h>
#include <string.h>
#include <malloc.h>
#include <stdlib.h>
int main( void )
size_t size;
char *buf;
if ( ( buf = (char *)malloc(10 *sizeof(char))) == NULL)
exit (1);
size = sizeof( buf );
strcpy(buf, "HelloWorld");
printf("\n Address is : %u String is : %s size : %d ", buf, buf,size);
if (( buf = (char *) realloc(buf, sizeof(20))) == NULL)
exit ( 1);
*(buf+10) = 'A'; *(buf+11) = 'B'; *(buf+12) = '\0';
printf("\n Address is : %u String is : %s\n", buf, buf);
free( buf);
exit( 0 );
Solaris:
Address is : 134160 String is : HelloWorld size : 4
Address is : 135704 String is : HelloWor
Linux:
Address is : 134518824 String is : HelloWorld size : 4
Address is : 134518824 String is : HelloWorldAB
Thanks
Venkat

Hi,
The following program is giving results diferently
when I am executing using g++ compiler in Solaris
and Linux.
Why it is so.
here is the code:
#include <stdio.h>
#include <string.h>
#include <malloc.h>
#include <stdlib.h>
int main( void )
size_t size;
char *buf;
if ( ( buf = (char *)malloc(10 *sizeof(char))) == NULL)
exit (1);
size = sizeof( buf );The size you get here is the size of buf, which is the size of a pointer, not the size of what buf points to. sizeof(*buf) would give you size of a char, the type (not the object) that buf points to.
There is no portable way to find out the number of bytes allocated on the heap if you are give only a pointer to the memory. You have to remember the size some other way..
strcpy(buf, "HelloWorld");A literal string consists of the characters in the string plus a terminating null, all of which are copied by strcpy. You allocated 10 chars for buf, but are writing 11 chars into it. At this point, the program has undefined behavior. Literally anything at all could happen, because you can't predict the effect of writing outside the bounds of allocated memory.
printf("\n Address is : %u String is : %s size :
e : %d ", buf, buf,size);
if (( buf = (char *) realloc(buf, sizeof(20))) == NULL)The "sizeof" operator in this case is returning the size of the type of a literal 20, which is an int. If you want to allocate 20 bytes, you write 20, not sizeof(20).
exit ( 1);
*(buf+10) = 'A'; *(buf+11) = 'B'; *(buf+12) == '\0';SInce you can't count on buf having more than 4 bytes at this time, you are writing into unallocated memory, with undefined results.
printf("\n Address is : %u String is : %s\n", buf, buf);
free( buf);
exit( 0 );
Instead of asking why you get different results on different platforms, you should be asking why the program doesn't crash on all platforms. :-)
You can avoid these problems with keeping track of allocating memory by using the C++ standard library instead of trying to manage low-level details yourself as in C code.
The standard string class, for example, extends itself as needed, and ensures that heap memory is freed when the string object is deleted or goes out of scope. You don't need pointers, malloc, free, or sizeof to use C++ strings.

HT1386 Because of limited internet on my iphone 5, i download updates to apps thru ITunes and then sync them to my iphone. Lately, the apps download properly and the sync seems to go thru, but on my phone, they keep saying they are updating and it never

Because I have limited internet package on my att iphone 5, I update apps on my computer thru ITunes and then sync them to my phone. The downloads seems to go thru and then install. But when I turn on my phone, the affected apps continue to say they are updating and it never goes away. I do not have wifi but when I am connected, the apps don't update. Help!!!!

Oh my gosh I had the EXACT same problem, and for ages I couldn't figure out how to fix it until today. Here's what I did:
First I went onto my computer, opened itunes, and un-installed tumblr, vine and kik. These were the apps I was having problems with (it said I had them on my phone but, like you, they didn't show).
Then I went to the itunes store, searched for each one, and it said I could update them so I did (just FYI: for tumblr a window popped up saying "please click ok to confirm you are 17 years or older", so I did that also)
When I went back to my phone and tried installing them again (still on my computer), it worked!
I hope this helps, because it was incredibly frustrating. Good luck!

Why keyboard and mouse right click not working in Solaris and Linux?

Hi all,
I have two problems:
1) I am working on AWT/Swing application and its working fine in window enviornment,but while running on solaris and linux mouse right-click option window not poping up.
2) Ctrl+c,Ctrl+v,Home and End keyboard key are not working in solaris and linux OS for same application.
Pls provide me some solution for these problem.
-Dinesh

Hi Nik,
Thanks for reply. I found some solution for the above problem.
For mouse right click there was problem in my source code.I have not implemented the mousePressed() method
In case of keyboard Home, End and arrow key working fine after exporting AWTUSE_TYPE4_PATCH=false; in solaris and linux
But still Ctrl-c and Ctrl-v not working.
I am using JDK1.5.0_07+Eclipse IDE 3.1
-Dinesh

Sending messages thru email and SMS without using XMS APIs

Hi,
I already have some working code that sends messages thru email and SMS. But currently it uses XMS APIs therefore I have a dependency on files like wdk.jar. I want to try and eliminate using the XMS APIs and only use soap to send these messages. I was wondering if there is some documentation available on how I can do this. Also if there a lot of code that needs to be written to do that.
I primarily want a very simple application that sends only string messages and reduce my dependencies.
I would really appreciate all the advice.
Thanks,
Sonali Nath

Hi,
You may refer to the following links to check if they help:
Sending SCCM Status Messages from MDT Scripts.
Send SCCM task sequence email report
Regards,
Sabrina

Installing 11i on Solaris and migrating 8.0.5 to new 8.1.6 database

I've installed 11i (several times) on a new Sun solaris server. I also selected it to install a fresh database. On another server we have 11.0 and 8.0.5 database. We are using a new server to install 11i and we want to move our database over. I managed to transfer all database files over to the new server and upgrade to 8.1.6 (succeeded)
How do I proceed now to get the 11i applications to use the database i've transferred over. Is this possible??? Can't find any clear documentation on how to merge this database into the applications 11i.
Thanks
null

Gina, I am attempting something similar... but it involves moving an exisiting installation from HP-UX to Solaris, so I cannot move the datafiles... If I run into a method that helps both of us, I will let you know... as of now, I am installing fresh on Solaris and going to try to run upgrade scripts on existing 10.7 and exp/imp into the new instance on 11i (Solaris).
Let me know of anything you find out that could help me, and I will do the same...
thanks
dns

Why when i download anything thru firefox and try to run it says its not a win 31 application and the properties show it is empty

why when i download anything thru firefox and try to run it says its not a valid win 32 application and the properties show it is empty

-> Tap ALT key or press F10 to show the Menu Bar
-> go Tools Menu -> Clear Recent History -> '''Time range to clear: select EVERYTHING''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies, Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Advanced -> Network -> Offline Storage (Cache): click '''Clear Now''' button
If the problem persist check this link:
Unable to download or save files
https://support.mozilla.com/en-US/kb/Unable%20to%20download%20or%20save%20files
Check and tell if its working.

Performance question on looping thrue blocks and items (forms 10.1.2.3)

Hi all,
I'm back again in Forms forum : ) !!! and I'm working on a new and very interesting project
version used : Forms [32 bits] Version 10.1.2.3.0 (Production)
A little question for gurus :
On former projects I used to call loops on blocks and item like shown below to do various things such as displaying buttons or showing canvas or different VA depending on the user or scenarios .
PROCEDURE FRM_BLK_ITM_LOOP IS
v_curblk varchar2(90); -- bloc courant
v_curitm varchar2(90); -- item courant
BEGIN
v_curblk := get_form_property(:SYSTEM.CURRENT_FORM,first_block); -- on récupère le 1er block de la form
LOOP
v_curitm := v_curblk||'.'||get_block_property(v_curblk,first_item); -- on récupère le 1er item du block
    WHILE v_curitm != v_curblk||'.'||get_block_property(v_curblk,last_item)
     LOOP -- tant que l'item n'est pas le dernier du block on loop
        v_curitm := v_curblk||'.'||get_item_property(v_curitm,nextitem); -- on récupère l item suivant
        if get_item_property(v_curitm,<some property>) = 'TRUE' then
          --- I can do something.... or adding more conditions if then etc...
        end if;
    END LOOP;
EXIT WHEN v_curblk = get_form_property(:SYSTEM.CURRENT_FORM,last_block); -- on sort losrqu on arrive au dernier block
v_curblk := get_block_property(v_curblk, nextblock); -- on passe au block suivant
END LOOP;
END;In my current project we work on quite huge forms which can have a consequent number of blocks and items.
And we must be very careful regarding performance issues as these forms are accessed via LAN and WAN.
So my question :
This method seems to be quite efficient as it goes thrue blocks and items sequences as they are defined in the builder comparing to go_block -> go_item ->do_something which can easily turn into nightmare-programming.
But I don't really know about network roundtrips with this kind of method.
Is everything done in the app server and then fetched to the client?
What triggers block-level and item-level can be fired during the execution of the loop ? and so one...
Thanks in advance for your advices on this matter.
Jean-Yves

Hmmm, I have to say I never bothered if Forms is in Socket mode or not; I enabled the network statistics, counted the roundtrips and looked for ways to get them lower (my old friend wireshark did also a good job regarding this) ;). But regarding the note Forms 6i uses Socket Connections by default, this might apply to 10g too (or the enhancement request was approved, who knows).
Frankly I am not entirely sure what Socket Mode means; I guess it's the mode the forms applet talks to the forms runtime; wheter it's stateful (via Sockets) or stateless (via HTTP / HTTPS) but this is just a wild guess, and I can't find informations on it quickly. I also enabled networkStats on my Developer Suite only, so I cannot tell if you can enable them on a full-fledged Application Server.
Anyway; as said I just counted the roundtrips and looked where I can avoid them when I made our application ready for WAN.
Another useful tool was Shunra VE Desktop which I used to simulate low bandwith networks with high latencys; I installed it on a virtual XP, started the application and tested how the Application performs. If something looked odd, I looked behind the scenes, built a little testform basing on the code behind and tried out various things; very often you can take advantage of the event bundling forms seems to make when you use several set_xyz calls as Francois also noted; e.g.
set_custom_property('bean_item', 1, 'PROPERTY', prop);
set_custom_property('bean_item', 1, 'PROPERTY', prop);
set_custom_property('bean_item', 1, 'PROPERTY', prop);
set_custom_property('bean_item', 1, 'PROPERTY', prop);
set_custom_property('bean_item', 1, 'PROPERTY', prop);
vRet := get_custom_property('bean_item', 1, 'PROPERTY);most certainly will cause just 1 roundtrip; but if you use get_custom_property in the middle of the set_custom_property calls you will encounter 2 roundtrips as forms needs to synchronize (you get a value from the bean so the forms runtime needs a response) with the forms applet whereas set_custom_property is a one-way-street which can be fired off simultaneous. The same applies to fbean.invoke and fbean.invoke_bool, fbean.invoke_char and the like. Of course if you are using more then one get_custom_property in this case the roundtrips will increase accordingly.
If you want to make use of event bundling make sure you fire off as much set_xyz as you can before forcing forms to synchronize (e.g. with get_xyz, or synchronize, create_timer,...)
cheers

It appears since my Windows PC McAfee AV subscription expired my PC's iTunes doesn't see my two Apple TV2's. My computer has internet connection thru router and my ATV has internet connection thru same router. My iPad can see the ATV but it can't see iT

My Windows PC iTunes doesn't see my two Apple TV2's (in the speaker button in lower right of iTunes), I believe this problem began when my PC's McAfee AV subscription expired. My computer has internet connection thru router and my ATVs have internet connection thru same router so it's not a networking issue. My iPad can see the ATVs but it can't see iTunes so the problem appears to be PC/iTunes related. I turned the PC's firewall off but no joy. I uninstalled the expired McAfee and still no joy. Reboot = no joy. Glass of scotch = no joy. Need help!!

Wanted to add that I turned on Home Sharing w/the same account in iTunes and ATVs. And I've successfully streamed music/photos to my ATVs for over a year.

You can take a coldbackup from solaris and use it on windows NT?

hi all,
You can take a coldbackup from solaris and use it on windows NT?
can we?
regards
girish

khaja(DBA) wrote:
Yes!!! why not
Have you actually done this?
Why not? Because the internal structure of the solaris files is different from Windows.
>
>
Regards,
khaja

HELP ME!!! Everytime i try to go to facebook. it redirects me and wont let me pull it up. I tried getting on it thru google and i even tried to download firefox, and it still wont work!!! help please

HELP ME!!! Everytime i try to go to facebook. it redirects me and wont let me pull it up. I tried getting on it thru google and i even tried to download firefox, and it still wont work!!! help please

To where are you redirected? Could this be something your network administrator has done on purpose?

Why do YouTube videos stop? I have restarted,reset, played thru email and played thru app. It plays on my desktop fine.

Why do YouTube videos stop? I have restarted,reset, played thru email and played thru app. It plays on my desktop fine.

Okay... No flash... understand...
So I went ahead and installed YouTube app on my IPhone... but now when I select the youtube video from Facebook I get into youtube and I can see the video I 'm trying to play, but now a message appears over the video "The content owner has not made this video available on mobile. Add to playlist to watch it later on a PC." At that point I was able to seach & select other videos by the artist (George Strait) off youtube and play them pkay on my Iphone, but not this particular one posted on facebook. Oh well.. I've spent enough time on this one, I know when I can't get there from here..
Thanks razmee209 for your help, its much appreciated..
Marvin

JNI, Solaris and Signal 11

There are a number of bugs in the database that have the following attributes:
-JNI
-Solaris
-Signal 11 exceptions.
-Long running applications.
I am experiencing something similar. I was using C threads for some call back functionality (and of course registering it them with JNI.) I was hoping that starting the threads with java would help but it didn't.
I have several questions:
-Has anyone found anything that allows them to work around this? Doesn't matter what you think it was - like a different switch on an application server. I am just curious if anyone thinks they solved it in any way.
-Does anyone have an idea what might cause it? Even an just an idle thought?
-Does anyone have a long running application, that uses JNI on Solaris and they don't experience this (obviously the JVM itself does this, but I am still curious?)
-And slightly different that the above, does anyone have a long running JNI Solaris application using C threads that doesn't have this problem?

jschell, are you still experiencing this?
You may have seen some of my posts before... I have seen many of yours. But I hadn't seen this one until now, by chance.
I am running on Solaris 8 with Java 1.3.1_03 and have a multithreaded C/C++ program that invokes the JVM and makes calls into Java via JNI. Actually, I have a few programs like this, but a particular one is set up to run as a daemon and eventually (after a couple of hours) runs into a segmentation fault (signal 11). The stack in the core file when the program fails shows that a thread started in the native code attempted "AttachCurrentThread()" and then a segfault happens way down in the JVM somewhere. However, I had an issue like this previously and I tracked it down (unexpectedly) to a memory leak in a totally unrelated portion of the native code. So I am trying to find other memory leaks in the code using tools like Rational Purify but it is tricky to get Purify and the JVM to play nicely together.
Additional info: I have all latest patches applied, not using signal handlers, and am using the "alternate" thread library in /usr/lib/lwp.
- I have another similar program on Solaris that does not seem to have this problem.
- The same program that's crashing on Solaris seems to run OK on both Windows and HP-UX.
Given the above, I am pursuing the avenue of a memory corruption in the native code as that has turned out to be the cause of numerous other problems in the past, but I am having a very hard time with this one. jschell (or anyone else), please let me know about your status and what you think.
Thanks -
Chris

TS3367 face time has the camera icon with a line thru it and will not complete a call?

on my iphone, when trying a face time call, the camera has a line thru it and will not complete the call. it just rings tothe person, but there phone does not ring.

I have the same problem. I can't figure it out. I have followed their
trouble-shooting guide with no luck/\.

My iCloud is asking me to put in my husbands iCloud password not mine and won't let me in.. Anyone know why this is? Cuz we don't even have our phones linked together! He had a ph thru work and I have a separate plan.. Weird!

Thanks if anyone can help me out!!

My iCloud is asking me to put in my husbands iCloud password not mine and won't let me in.. Anyone know why this is? Cuz we don't even have our phones linked together! He had a ph thru work and I have a separate plan.. Weird!

RDS thru Solaris 9 and CF7

Similar Messages

Maybe you are looking for