Re: after installing SP8 Registry Problems

I had the same Problem, my solution was:
Copy the BEA Weblogic 5.1.0 key including all values into a new key named
5.1.0sp7
A rename should do as well, but I tend to be cautious!
Thomas

Facing Same problem
with my wlstartup.dll as old SP6 file things work fine.
Urgent help required in SP8 Installation
Regards
Sekhar
"Marc T. Calello" wrote:
After installing sp8, during which I copied over the \bin directory with the
one contained in the service pack.
wlconfig will not work correctly.
Windows 2000
D:\weblogic\bin>wlconfig
Dialog pops us:
Entry Point Not Found
The procedure entry point
?parseCmdLine@@YAHHPAPADPAUJDK1_1InitArgs@@PAUWLServerInitArgs@@h@Z
could not be located in the dynamic link library wlstartup.dll.
D:\weblogic\bin\win32_12>wlconfig
Cannot find key HKEY_LOCAL_MACHINE\Software\BEA Systems\WebLogic\5.1.0sp7:
The Windows registry is misconfigured
for the WebLogic Server
wlconfig: Cannot load WebLogic args from registry.
Marc T. Calello
Momentum Software, Inc.
1717 W. 6th Street; Ste. 300
Austin, TX 78703
[email protected]
http://www.momentumsoftware.com
Phone: (512) 236-1517
Fax: (512) 236-1267

Similar Messages

After installing sp8

After installing sp8, during which I copied over the \bin directory with the
one contained in the service pack.
wlconfig will not work correctly.
Windows 2000
D:\weblogic\bin>wlconfig
Dialog pops us:
Entry Point Not Found
The procedure entry point
?parseCmdLine@@YAHHPAPADPAUJDK1_1InitArgs@@PAUWLServerInitArgs@@h@Z
could not be located in the dynamic link library wlstartup.dll.
D:\weblogic\bin\win32_12>wlconfig
Cannot find key HKEY_LOCAL_MACHINE\Software\BEA Systems\WebLogic\5.1.0sp7:
The Windows registry is misconfigured
for the WebLogic Server
wlconfig: Cannot load WebLogic args from registry.
Marc T. Calello
Momentum Software, Inc.
1717 W. 6th Street; Ste. 300
Austin, TX 78703
[email protected]
http://www.momentumsoftware.com
Phone: (512) 236-1517
Fax: (512) 236-1267

Facing Same problem
with my wlstartup.dll as old SP6 file things work fine.
Urgent help required in SP8 Installation
Regards
Sekhar
"Marc T. Calello" wrote:
After installing sp8, during which I copied over the \bin directory with the
one contained in the service pack.
wlconfig will not work correctly.
Windows 2000
D:\weblogic\bin>wlconfig
Dialog pops us:
Entry Point Not Found
The procedure entry point
?parseCmdLine@@YAHHPAPADPAUJDK1_1InitArgs@@PAUWLServerInitArgs@@h@Z
could not be located in the dynamic link library wlstartup.dll.
D:\weblogic\bin\win32_12>wlconfig
Cannot find key HKEY_LOCAL_MACHINE\Software\BEA Systems\WebLogic\5.1.0sp7:
The Windows registry is misconfigured
for the WebLogic Server
wlconfig: Cannot load WebLogic args from registry.
Marc T. Calello
Momentum Software, Inc.
1717 W. 6th Street; Ste. 300
Austin, TX 78703
[email protected]
http://www.momentumsoftware.com
Phone: (512) 236-1517
Fax: (512) 236-1267

After installing Snow Leopard problems with using any of my Helvetica fonts

I've never really have a problem with any of apple's products until now.
After installing Snow Leopard I've found problems with using any of my Helvetica fonts,
which is a BIG problem if you work in DTP or print. You CAN'T remove the system version of Helvetica, and replace it with your own anymore.
Also Flash CS4 seems to be a dead duck, as after about 5-6 seconds of loading the program it crashes with a "KERNPROTECTIONFAILURE".
<title edited by host>

Thanks Tom but the original post title was "Work in DTP, don't install snow leopard", but of course apple were unhappy with the title. I know the issue/problem has been discussed for months, the real problem is that it shouldn't be a problem which everyone has to find work arounds for.
After 4 days of playing about, I've finally got flash CS4 working and Quarkxpress was also a big problem for a few months. Printer description (PPD) files which snow leopard doesn't like, but worked in tiger & leopard.....means I can't use my two A3 inkjets for proofing anymore.
I'm just disappointed by snow leopard

After Installing Application Server - Problem connecting to my Databases

I have 10g installed on my Windows server, and have no problems connecting to my database(s). After I install Application Server 10g, I am no longer able to connect to any of them, as if the TNSNAMES.ORA file is no longer configured correctly. I am training myself on these applications. Anyone have any suggestions what is happening behind the scenes?
Thank you,
Daniel Nadler

After deploying a jsf application via the web interface of the application server enterprise manager I tried to connect to the 10g database - and it failed with the same error as yesterday?
I really don't unterstand what is going on. I would really appreciate it if someone could point me out where to start digging for a solution / unterstanding of the problem.
Quoting this thread (installing db on same server as AS): 10gAS and Database Server on the same machine
>
Yes, you can do this. Here are some guidelines:
(1) Make sure your system requirements are sufficient to handle the application server and the database. The recommendation is to add the AS system requirements and the DB system requirements together.
(2) Install each product into its own Oracle home. For example:
- Oracle Home 1: AS Mid-tier
- Oracle Home 2: AS Infrastructure (including Metadata Repository)
- Oracle Home 3: Database
(3) If your AS installation includes a Metadata Repository, make sure that the
Metadata Repository and the database use a different SID and global db name.
(4) It is possible that the Metadata Repository and the database can share
port 1521. Review this information before you start your AS installation:
http://download.oracle.com/docs/cd/B14099_19/win.1012/install.1012/install/reqs.htm#CIHEBFDG
The installation guide under (4) tells me that I don't have to worry since I use a new listener version.
To complete the confusion: on my virtual test machine oracle 10g and oracle AS 10g work fine side by side?? Perhaps because I did a Standard Edition install of the database (on the real machine I used Enterprise Edition)? Is there a way to figure out what kind of install I did?
Lots of questions, any help or links are really appreciated! Thanks in advance!
------------------ EDIT -------------------
Whoops, I might had a problem with a not correctly shut down database (just shutted windows down without killing the instance - didn't know this wasn't ok). Still evaluating the issue. But to say the least, it seems the application server has nothing to do with my problem :)
Message was edited by:
mathias.ringhof

Black Screen Problem after installing MineCraft MCedit

After installing MCedit, the problem starts with frequently whole black screen. At first from time to time, few seconds. Then within around two days it went worse, that means more often and longer black screen. By now (three days later) while booting I just get the screen for some seconds or half a minute... then just black screen... Mac is running. Apple support say it's most likely a hardware problem. I'm not sure about... any idea what to try about? I tried all the boot options I found :-) doesn't help (iMac 27'' / Lion)
Thanks

Quote
And I've installed it and I have the latest drivers (from windows) for it
Quote
On another note when the MSI CD is not installed the graphic are spectacular and very game that I've tried works at full setting.
Well if its working very well for you, then don't install from the CD.

?? Bad registry creation after install Oracle 8.1.7 / Developer 6i

Hello,
I posted a previous message here regarding a problem starting the Oracle services in my laptop, after installing Developer 6i.
Well I now know what happened: When I installed Oracle Enterprise, I specified ORAOi as the ORACLE HOME (in C:\oracle8i). Later while installing Developer I specified ORANT (C:\orant) as it's own ORACLE HOME.
Now in the REGISTRY this should have created TWO oracle homes, but as it turns out the installation of Developper just REPLACED the previous home. So now I seem to have ONLY ONE HOME (all the other keys in the registry, for the DB, were lost).
Now, how can I do to get a copy of the "previous" registry keys, before the install of Dev 6i?
I'm installing in Windows XP.
I would really appreciate ANY help.
--oswaldo.

The normal procedure when installing a single database and a single version of developer on the same PC is to install developer first then the DB afterwards, AS LONG AS the DB is multiple-home aware. In this example, we are using 8i / 8.1.5 as this is MOH aware. This is documented by Oracle. This is the standard method - install developer first then 8i.
PROBLEM! If using a pre 8i database, you have to install it into the same Oracle home as developer - and only then there are only VERY SPECIFIC COMBINATIONS of the two products that will work. You HAVE to make sure this is correct. The problem with this approach is that you cannot upgrade the one without upgrading the other. As such Section A of this note is based on the assumption that you are using 8i or another MOH aware database.
Workarounds for Pre 8i database and developer installations on the same machine can be discused later.

Problems after installing Bootcamp 3.1

Hello everyone.
I had installed Windows 7 64 bit Ultimate in a Bootcamp partition. I used the SL disk to install Bootcamp 3.0 which, with some audio related problems which were solved by changing the drivers, worked well. All sounds played, the graphics card behaved normally, etc.
Recently I got the alert of a Bootcamp update, 3.1, as we all know. After installing it without a hitch, small problems began to pop up.
First, no Windows startup sound played anymore, and there has been no way for me to make it work again. I've gone to countless forums and gone through an endless barrage of suggestions, including a complete formatting, but it always leads back to the same, isolated problem: Startup sound plays in BT 3.0, doesn't play anymore in BT 3.1.
But more importantly, after pretty much giving up with the startup sound issue (it's only that particular sound, in the login screen, so I decided to ignore it's absence), more problems appeared. Initially, all system tray icons appeared swiftly. Now the main ones, Sound, Wireless Connection and Battery appear fast, but the rest take at least 5 minutes to appear. This is again something that wasn't present in Bootcamp 3.0.
Yet another problem, this one I consider is the most important, and the real reason for this post of mine, is that Bootcamp 3.1 brought a serious driver problem with my Macbook Pro's 9400M video card. Doing the most stupid of tasks such as opening the video card's control panel from the Desktop gives me the following error:
"The NVIDIA Display Panel extension cannot be created.
Possible reasons include:
Version mismatch. Reinstalling the drivers may solve this problem."
Now, the Device Manager shows no errors in hardware-driver smoothness in any aspect, yet it's clear that the driver that BT 3.1 installs for the video card was either faulty or old, or for another OS. I went to NVIDIA's site to manually get the driver, but it turns out that they offer no NVIDIA GeForce 9400M drivers for Windows 7 64 bit. So I wonder, how come it worked before? Because in Bootcamp 3.0 the Control Panel would open flawlessly.
So this is serious. Gaming has also turned into a nightmare, since the problem with the video card negatively affects the smoothness of the gameplay. Apple, things weren't working 100% with BT 3.0, but BT 3.1 far from making things better just got everything worse.
I ask everyone here if there is a known solution. Should I install the NVIDIA GeForce 9400M drivers for Windows 7 32 bit? Why doesn't the driver installed by BT 3.1 function as it should when it's supposed to be covering Windows 7 compatibility? Why are the barrage of audio errors present in BT 3.1 and not in BT 3.0? What happened with my startup sound?
Apple, you're offering the possibility for your users to user Windows for compatibility and gaming. You market your Macs are fully compatible and flawless even running Windows. Don't come about saying this is not your problem, it is. It's your drivers, you develop them, you give them to us. If they don't work, you must do something about it. If not, then stop offering the Bootcamp service completely. If you're gonna do something, do it well.

http://www.nvidia.com/object/notebookwinvista_win7_x64_195.62whql.html

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

Problem with Itunes and NAS after installing latest version of Itunes

After installing the latest version of Itunes on my new PC (Windows 7 Ultimate) I have problems seeing the music off the Itunes server on my NAS.
I see the name of the NAS under tab SHARED (GEDEELD in dutch), but when I click on it, Itunes is making connection with the NAS but I see the music for less then a second.
Then the display goes back to the tab LIBRARY.
I've searched the web for this problem, checked on my firewall,... nothing to find. On another windows 7 PC, it is still working fine but this is an older version of Itunes.
So what can be the problem ?

No, I had not uninstalled it, I didn't realize I had ever installed it. I don't use it at all, never have. I uninstalled the MobileMe Control Panel then restarted my computer for good measure, and that appears to have resolved the issue! Thanks very much for your help!

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

A lot of problems after installing Windows XP using Boot Camp on a Mac Book

I have been having a lot of problems after installing Windows XP Home Edition (2002).
For one, after installing Windows using Boot Camp with Mac OS X 10.5.1, I opened Windows on my Mac Book, inserted the Mac OS X Disk 1 as in the instructions and got the message: +"This package requires a newer version of the Windows installer. Do you want to update the version of the Windows Installer on your system?"+ When I clicked Yes (I had NO idea what it meant at the time), I got the message: "The required resource 'UPDATE' is missing" and the Installer quit.
How do I fix this problem?
Another problem I have is that there is no sound on the Windows XP, yet it works perfectly on Mac OS X. Is there any way to fix this problem?
A third problem I have is that I can't wirelessly connect to the internet using Window XP, yet I can on Mac OS X. I have no idea on how to fix this, and it's really messing with me. D:<
D: There are way too many problems, and I have a feeling there will be a lot more later on. Help....
~Twilight

---I'm moving this topic to the Boot Camp forums.
-Twilight

Problem starting up G5 2.5 after installing 10.4.7

i have a G5 dual 2.5 (single core) that, until yesterday was running 10.3.9 and final cut pro 4.5 and working just fine.
yesterday i upgraded to 10.4.7 and fcp 5.1.1 (mid-project, which was soooooooo stupid, but that's another thing,) and now, whenever i restart or shut down and restart the computer, i just get the "chung" and nothing boots up. no desktop, no grey screen with spinning cursor. nothing. just a black screen. the only way to get it to restart is to shut down again, open up the side and reset the pmu.
i reset the permissions, etc through Onyx. no help.
i called apple and they think it might be a hardware issue and that i should take it in for repair. but repair is at least 10 days away and, like i said, i'm mid project and can't loose it right now. also, hardware related? why now, after installing new system software? wouldn't that be software related?
so, at any rate, now, instead of shutting my machine off at night, i'll just have to leave it on and suck up the juice until i can get it into the shop....
...unless any of you have experienced this and have an idea of what is wrong.
can anyone help??
thanks in advance
carl
if you need more info...hardware configs, etc, let me know.

so i ran hardware test yesterday and my machine failed the logic board test - twice. so bad motherboard?
took it to the apple store in jacksonville, and when they ran the hardware test it passed..everything. they ran it agin and it passed again. but when they reinstalled tiger, same restart and shutdown problem.
they said it could be the ram i installed a year ago...crucial, 2 512 sticks. and when we pulled them out and reinstalled tiger again, the machine seemed to be ok.
so they recommended i buy apple ram at $200 a gig! they said tiger is very sensitive to ram.
i don't understand. i know many ppl who do not use apple ram, and from what one of the genius' told me, the crucial ram i installed is the same apple uses anyway.
i don't want to spend another $200 on new ram to run tiger when the ram i have now runs fine in panther.
but i feel cheated that i have a fast machine, but can't run tiger or final cut studio on it becaue of my ram!?!?!
i don't know what to do at this point.
any thoughts or recommendations? I'm stuck...
oh, also, apple care on the phone failed to tell me that i qualified for on-site help instead of having to drive an hour to the apple store. i wonder if i run hardware test again and it fails, and i write down the error code, i can get apple care to send someone out to check the machine out from top to bottom. i spent over 4 hours at the apple store yesterday and i really don't want to go through that again!

HT4623 After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

After installing the above mentioned update, my ipad will no longer turn on. I have just a black screen with the apple logo when I attach it to a power source. Anyone else having this problem, please advise on how to fix.

IF RESET DOESN'T WORK, FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTunes and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note: Data will be lost

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

Problems after installing Windows 7 Professional on Thinkpad T61

I have an old T61 that had Windows Vista installed. I wanted to use Windows 7 but didn't want to wipe out what I already had (for various reasons). So I bought a new disk drive and did a clean install of Windows 7 Professional. The disk drive is a Western Digital Blue Notebook 1TB drive. After installing the drive in the machine, I followed these instructions to install Windows 7: http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-74108. I chose to partition the drive into a C: drive (500GB) and a D: drive (431GB). After the install completed, I downloaded all the available Microsoft fixes (this took some time to complete).
For the Device Driver and Application install, I used the ThinkVantage System Update option. The site indicated that Microsoft .NET Framework 3.5 with Service Pack 1 or later was required. I downloaded and installed version 4. There were additional Microsoft fixes for version 4, which I downloaded and installed also. Then I downloaded and installed ThinkVantage System Update 5.03. I then executed System Update and selected all the available updates. They all installed, except for Windows 7 Update Module KB2615763 64bit. This update, after failing, gave the option to install manually but when I click on that option I receive a pop up saying: Installer encountered an error: 0xc8000247. The title of the pop up says Windows Update Standalone Installer.
I then attempted to install various applications on the machine: FileZilla FTP Client, Google Chrome, Notepad++, PrimoPDF were all installed without problems. When I installed a Cisco VPN Client for 64 bit machines, however, I was knocked off the network. Clicking on the WiFi symbol in the task bar showed that I had only limited connectivity to the network. I tried to do a IPCONFIG /ALL and neither the WiFi adapter nor the Ethernet LAN adapter showed up in the list. I uninstalled the VPN Client, from the Control Panel, and was immediately able to connect to the network. An IPCONFIG /ALL now showed all the network adapters. I installed/uninstalled the VPN Client several times just to make sure that it was causing the problem of no network connectivity.
I fgured that there might be updated network adapter drivers available to resolve the problem so I attempted both System Update and Windows Update again. System Update showed nothing available, except Windows 7 Update Module KB2615763 64bit. Windows Update had a message saying "Check for updates for your computer" but when I clicked on "Check for updates" it popped up a message saying "Windows Update cannot check for updates because the service is not running. You may need to restart your machine." I checked and the Windows Update service is running. I stopped and restarted it but received the same message when I tried to check for updates again. I rebooted the machine and tried Windows Update again. Same pop up message.
I tried the "Fix problems with Windows Update" option in the Control Panel but received a message saying - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting. The error details say:
Package ID: WindowsUpdateDiagnostic
Path: Unknown
Error Code: 0x8E5E0247
Source: Engine
I tried some of the other troubleshooting options and they all give similar errors - An error occurred while troubleshooting: A problem is preventing the troubleshooter from starting.
I then thought it might be a disk drive problem so I tried to do a CHKDSK /F but when the machine reboots the CHKDSK seems to start (there is a message that says it can be interrupted by pressing a key within 10 seconds) then, before the 10 seconds are up, it ends without checking the disk and the machine continues to boot up.
Has anyone seen any of these problems before? Did I miss something? Could this be related to the disk drive? Or missing device drivers? Bios?
Any help with this will be appreciated.
Solved!
Go to Solution.

A laptop drive that size is almost certainly an AF drive. You can check by looking up the model's specs on the vendor's site. You can also use the fsutil command to check the drive's physical sector size and verify that the size isn't getting reported correctly - which is what usually causes the update problem.
http://support.microsoft.com/kb/982018
Expand the "Issue 6 Fsutil.exe tool" entry in that link for more info. The entire KB may also be helpful.
If my guess is actually the problem you won't have to reinstall Windows 7. Just update - or roll back - the driver. You might first try going to Device Manager, selecting the storage controller, and rolling back to an earlier driver.
If that works, configure ThinkVantage System Update to not show the offending driver, or this will happen again. If that doesn't do the job, go to Intel's site and find the latest Matrix Storage Manager or Rapid Storage Technology that is specified for your chipset and operating system. Or just try the latest and if that doesn't work, try earlier ones.
https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Software+Products&ProductL...
Here's a local KB addressing this (presumed) issue: http://forums.lenovo.com/t5/Windows-7-Knowledge-Base/Windows-Update-Fails-After-Installing-New-Hard-...
To repeat, this is a bit of a guess. It's pretty likely that your storage driver is the culprit. Either you need one new enough to support the physical size reporting ioctl, or you've been bitten by TVSU "updating" to a buggy driver. Either way the corrrect driver should fix things.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Re: after installing SP8 Registry Problems

Similar Messages

Maybe you are looking for