Re: Assert condition was voilated
Hi Expert,
Can any one tell me below error i am gettting as dump how to solve this.
METHOD constructor.
DATA content TYPE hrasr00_dcontainer_content.
DATA fscnflds TYPE TABLE OF t5asrfscnfld.
DATA values_of_fields TYPE hrasr00_values_of_field_tab.
DATA field_states TYPE hrasr00_field_state_tab.
DATA values_of_fields_wa TYPE hrasr00_values_of_field.
DATA field_states_wa TYPE hrasr00_field_state.
FIELD-SYMBOLS <fscnflds_wa> TYPE t5asrfscnfld.
The Data Conatiner can be constructed using xml/content/form scenario
Assert more than one of them is not passed
ASSERT
( form_scenario IS NOT INITIAL AND xml IS INITIAL AND data_content IS INITIAL ) OR
( form_scenario IS INITIAL AND xml IS NOT INITIAL AND data_content IS INITIAL ) OR
( form_scenario IS INITIAL AND xml IS INITIAL AND data_content IS NOT INITIAL ).
for the above code Assert condition is voilated displaying where i need to chage as it is running in the BG.
Can any one throw some light on this...............
Regards,
Addu
Edited by: MdAddu on Nov 5, 2011 7:39 AM.
Edited by: MdAddu on Nov 7, 2011 12:38 PM
Hi,
I have check the coditon it is ok .
Regards,
Md
Similar Messages
-
While I have create group asset error occured Assert condition is voilated?
Hi All,
while I have create group asset error occured Assert condition is voilated . Its runtime error .
please can you send screen shot screen layout of group asset in asset master data?
Thanks
Shailesh.
9604645129.Hi
what is the message number/ Dump ananlysis (check it in ST22) ?
VVR -
Hi,
In my earlier thread, had mentioned about developing an application with 2 views, view1 and view2. This was working fine. After this I added a pop-up attribute in view2 ref to IF_WD_WINDOW. Also added an action OK in view2. Didnt write any further code.
Now when I execute the application by clicking on a button view1, I find that the application gives an error:
The ASSERT condition was violated.
I removed the popup attribute and the OK action. But still getting the same error.
What does this error mean and how do we rectify it.
Please help.
MickHi,
Mentioned are some details from ST22.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
Information on where terminated
Termination occurred in the ABAP program "CL_WDR_TABLE_DATA_P
in "GET_VISIBLE_TABLE_DATA".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 74
I have 3 input fields and 1 table on view2. There are 3 nodes on View2 in the View2 context, all with a cardinality of 1:1.
Please help. -
Assert condition failed when saving freight unit planning in transportation cockpit
Hi all,
I can successful complete Transportation Proposal and Optimizer Planning for freight Unit in Transportation cockpit. But when I am trying to save the freight Unit in Transportation cockpit, system is giving me dump "ERROR: The ASSERT condition was violated. (termination: RABAX_STATE)"
ST22 showing /SCMTMS/CL_BUFVAR_DISPATCHER==CP Assertion failed
Details of Active calls/Event in ST22
35 METHOD /SCMTMS/CL_BUFVAR_DISPATCHER==CP /SCMTMS/CL_BUFVAR_DISPATCHER==CM005 116
/SCMTMS/CL_BUFVAR_DISPATCHER=>/BOBF/IF_FRW_BUFFER~MODIFY
34 METHOD /BOBF/CL_FRW==================CP /BOBF/CL_FRW==================CM00K 1173
/BOBF/CL_FRW=>DO_MODIFY
33 METHOD /BOBF/CL_FRW_INT_ACCESS=======CP /BOBF/CL_FRW_INT_ACCESS=======CM002 45
/BOBF/CL_FRW_INT_ACCESS=>END_MODIFY
32 METHOD /BOBF/CL_FRW==================CP /BOBF/CL_FRW==================CM00E 861
/BOBF/CL_FRW=>DO_DETERMINATIONS
31 METHOD /BOBF/CL_FRW==================CP /BOBF/CL_FRW==================CM01C 274
/BOBF/CL_FRW=>/BOBF/IF_FRW_SERVICE_LAYER~FINALIZE
30 METHOD /BOBF/CL_LIB_DELEGATION_BOPF==CP /BOBF/CL_LIB_DELEGATION_BOPF==CM00E 12
/BOBF/CL_LIB_DELEGATION_BOPF=>/BOBF/IF_FRW_DELEGATION~FINALIZE
29 METHOD /SCMTMS/CL_BUFVAR_DODELEGATIONCP /SCMTMS/CL_BUFVAR_DODELEGATIONCM004 6
/SCMTMS/CL_BUFVAR_DODELEGATION=>/BOBF/IF_FRW_DELEGATION~FINALIZE
28 METHOD /BOBF/CL_FRW==================CP /BOBF/CL_FRW==================CM01C 246
/BOBF/CL_FRW=>/BOBF/IF_FRW_SERVICE_LAYER~FINALIZE
27 METHOD /BOBF/CL_TRA_SERVICE_MGR======CP /BOBF/CL_TRA_SERVICE_MGR======CM00P 23
/BOBF/CL_TRA_SERVICE_MGR=>/BOBF/IF_TRA_SERV_MGR_TRANSACT~FINALIZE
26 METHOD /BOBF/CL_TRA_TRANSACTION_MGR==CP /BOBF/CL_TRA_TRANSACTION_MGR==CM001 60
/BOBF/CL_TRA_TRANSACTION_MGR=>FINALIZE
25 METHOD /BOBF/CL_TRA_TRANSACTION_MGR==CP /BOBF/CL_TRA_TRANSACTION_MGR==CM00S 63
/BOBF/CL_TRA_TRANSACTION_MGR=>/BOBF/IF_TRA_TRANSACTION_MGR~SAVE
24 METHOD /BOFU/CL_FBI_CONTROLLER_NEW===CP /BOFU/CL_FBI_CONTROLLER_NEW===CM00D 22
/BOFU/CL_FBI_CONTROLLER_NEW=>IWCI_IF_FPM_TRANSACTION~SAVE
23 METHOD /SCMTMS/CL_UI_CONTROLLER_PLN==CP /SCMTMS/CL_UI_CONTROLLER_PLN==CM00L 63
/SCMTMS/CL_UI_CONTROLLER_PLN=>SAVE_PLANNING
22 METHOD /SCMTMS/CL_UI_CONTROLLER_PLN==CP /SCMTMS/CL_UI_CONTROLLER_PLN==CM00N 41
/SCMTMS/CL_UI_CONTROLLER_PLN=>HANDLE_ACTIONS
21 METHOD /SCMTMS/CL_UI_CONTROLLER_PLN==CP /SCMTMS/CL_UI_CONTROLLER_PLN==CM00A 16
/SCMTMS/CL_UI_CONTROLLER_PLN=>IWCI_IF_FPM_APP_CONTROLLER~AFTER_PROCESS_EVENT
20 METHOD /1BCWDY/03N7LCDLX3EFC4K580SF==CP /1BCWDY/B_03N7LCDLX3EFC4K580YR 689
CL_COMPONENTCONTROLLER_CTR=>AFTER_PROCESS_EVENT
Web Dynpro Component /BOFU/WDC_FBI_CONTROLLER
Controller COMPONENTCONTROLLER
19 METHOD /1BCWDY/03N7LCDLX3EFC4K580SF==CP /1BCWDY/B_03N7LCDLX3EFC4K580YR 119
CLF_COMPONENTCONTROLLER_CTR=>IWCI_IF_FPM_APP_CONTROLLER~AFTER_PROCESS_EVENT
Web Dynpro Component /BOFU/WDC_FBI_CONTROLLER
Controller COMPONENTCONTROLLER
18 METHOD CL_FPM========================CP CL_FPM========================CM00G 101
CL_FPM=>CALL_UIBB_PROCESS_EVENT
17 METHOD CL_FPM========================CP CL_FPM========================CM005 46
CL_FPM=>PROCESS_EVENT
16 METHOD CL_FPM========================CP CL_FPM========================CM00C 33
CL_FPM=>RUN_EVENT_LOOP
15 METHOD CL_FPM========================CP CL_FPM========================CM002 5
CL_FPM=>IF_FPM~RAISE_EVENT
14 METHOD /1BCWDY/03N7LCDLX3EFC3O22W8A==CP /1BCWDY/B_03N7LCDLX3EFC3O22XGJ 1412
CL_PAGE_HEADER_CTR=>ONACTIONACTION
Web Dynpro Component FPM_OVP_COMPONENT
Controller PAGE_HEADER
13 METHOD /1BCWDY/03N7LCDLX3EFC3O22W8A==CP /1BCWDY/B_03N7LCDLX3EFC3O22XGJ 581
CLF_PAGE_HEADER_CTR=>IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER
Web Dynpro Component FPM_OVP_COMPONENT
Controller PAGE_HEADER
12 METHOD CL_WDR_DELEGATING_VIEW========CP CL_WDR_DELEGATING_VIEW========CM006 6
CL_WDR_DELEGATING_VIEW=>INVOKE_EVENTHANDLER
11 METHOD CL_WDR_ACTION=================CP CL_WDR_ACTION=================CM00A 38
CL_WDR_ACTION=>IF_WDR_ACTION~FIRE
10 METHOD CL_WDR_WINDOW_PHASE_MODEL=====CP CL_WDR_WINDOW_PHASE_MODEL=====CM00U 95
CL_WDR_WINDOW_PHASE_MODEL=>DO_HANDLE_ACTION_EVENTS
9 METHOD CL_WDR_WINDOW_PHASE_MODEL=====CP CL_WDR_WINDOW_PHASE_MODEL=====CM002 95
CL_WDR_WINDOW_PHASE_MODEL=>PROCESS_REQUEST
8 METHOD CL_WDR_WINDOW=================CP CL_WDR_WINDOW=================CM00V 12
CL_WDR_WINDOW=>PROCESS_REQUEST
7 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00I 77
CL_WDR_MAIN_TASK=>EXECUTE
6 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00U 6
CL_WDR_MAIN_TASK=>IF_WDR_RUNTIME~EXECUTE
5 METHOD CL_WDR_CLIENT_ABSTRACT_HTTP===CP CL_WDR_CLIENT_ABSTRACT_HTTP===CM01C 114
CL_WDR_CLIENT_ABSTRACT_HTTP=>HANDLE_REQUEST
4 METHOD CL_WDR_MAIN_TASK==============CP CL_WDR_MAIN_TASK==============CM00J 85
CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
3 METHOD CL_HTTP_SERVER================CP CL_HTTP_SERVER================CM00I 627
CL_HTTP_SERVER=>EXECUTE_REQUEST
2 FUNCTION SAPLHTTP_RUNTIME LHTTP_RUNTIMEU02 1218
HTTP_DISPATCH_REQUEST
1 MODULE (PBO) SAPMHTTP SAPMHTTP 13
%_HTTP_START
Any help will be appreciated
Thanks and regards
Shambhu SarkarHi Shambhu,
When i see the assert,i feel there is some problem at the determination. Whether you have implemented any custom determination of your own?
No issues, Place the break-point at the assert and check the call stack and find the which determination is that?
Thanks,
Dinesh -
Hello all,
I have looked everywhere but this one is not to be googled.
I am running on my local machine for testing in a checked out rpd, Connected across connection pools to two different databases on two different servers on two different continents (not that it matters).
The rpd saves with no errors.
I have a facts table and two dimensions. When I run a report with data from the Facts and either dimension it runs great and is quick. If I try to run a report with both dimensions and the facts I get the error below.
On the connections between the tables there is a two field join between the fact and each dim table. WIth a Right Outer Join on both
MV_INVOICES_GET_PAID.O_GET_PAID_PROBLEM_NUMBER = GP_UNION_MV.PROB_CHAR AND
MV_INVOICES_GET_PAID.COMPANY_CODE_DIM = GP_UNION_MV.GMIS_COMPANY
MV_DEL_GET_PAID.DEL_O_GET_PAID_PROBLEM_NUMBER = GP_UNION_MV.PROB_CHAR AND
MV_DEL_GET_PAID.DEL_COMPANY_CODE_DIM = GP_UNION_MV.GMIS_COMPANY
===============================================================
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition internalParams.size() > 0, file .\Src\SQOIGeneratorBuiltIn.cpp, line 724. (HY000)
SQL Issued: SELECT "Problem Header".PROBLEM_NUMBER saw_0, "Problem Header".ENTDATE saw_1, Deliveries.DATA_SOURCE_CODE saw_2, Deliveries.DEL_BILL_CUST_NO saw_3, Invoices.MATERIAL_CODE_DIM saw_4, Invoices.I_DUE_DATE saw_5 FROM GPDIS WHERE "Problem Header".ENTDATE >= timestamp '2009-06-01 00:00:00' ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4, saw_5
================================================================
Thanks for any help. I was wondering if my local machine might need an OBI upgrade,Not using cubes. All three tables are just tables. Nothing special about them. No hierarchies.
On the joins, they are joined properly.and they will return data as they should each individually, but not both at the same time.
I did notice that on the Logical Table Diagram that I have the option of using Left Outer Joins, etc. But on the Physical Diagram I can only join the fields with the option to use Inner join.
Version:
--------- Oracle BI Version: 10.1.3.3.1.071012.2100 :
Edited by: user4652699 on Nov 11, 2009 1:09 PM -
[nQSError: 46036] Internal Assertion: Condition pLeftOperand in obiee 11g
Hi ,
I am trying to display text data from Essbase Cube in OBIEE report , had one thread already opened for this :
Displaying text data from Essbase Cube in OBIEE report
I'm approaching in the following way :
1. Created one session initialization block "TEXT_ID_VALUE" , having below query :
select TEXT_ID, VALUE from HSP_TEXT_CELL_VALUE ;
2. Matching the data populating in "TEXT_ID"(numeric data) session variable, with one of my measure column and fetching the corresponding "VALUE" session variable (text data) . (both the session variable's belong to TEXT_ID_VALUE initialization block , with 'row wise initialization' )
3. Wrote below expression in measure column(in BMM layer) :
CASE WHEN "CAPEX_inteliplan"."CAPEX"."Capex Description" = VALUEOF(NQ_SESSION.TEXT_ID) THEN VALUEOF(NQ_SESSION.VALUE) END
Its throwing this error message :
*[nQSError: 46036] Internal Assertion: Condition pLeftOperand, file server\Query\Optimizer\Request\Src\SQORRqExprCond.cpp, line 158.*
Am I missing anything / is it the correct way to do it?Hi Srini ,
I found " user.sh " under :
C:\obiee11g\instances\instance2\bifoundation\OracleBIApplication\coreapplication\setup
It about :
The examples of configuring Oracle and DB2 UDB
*# clients on various Unix and Linux Operating Systems(Solaris,Linux,HPUX PA-RISC,HPUX Itanium,AIX) .*
I found a "user.cmd"(probably for windows) also in that folder location , but it contains only the following :
*@echo off*
REM This file is a place holder for setting environment variables
REM set TNS_ADMIN=C:\obiee11g\Oracle_BI1\network\admin
Not sure where add "OBI_BACKGROUND_STACK_SIZE = 1024 KB" ! -
Error:Assertion :Condition COLOCK_ISSET(value)
Hi ,
every one after creating session variable .when i doing global consistency check.i am getting following error.
[nQSERROR :43113]Message returned from OBIS
[nqserror:46036] Internal Assertion :Condition COLOCK_ISSET(value),
file server\objectmodel\src\SORp Object.cpp,line503
so plz help to sort out this issue.
Thanks in advance.
AshishDownload and apply patch 12909840.
For more ref: Doc 1368771.1
Appreciate if you mark as correct -
I installed OBI 11 on Redhat 5.2 86_64, with Oraclr 11.2 database. During installation,there are two configuration error: opmnctl task failed
Step Executing: opmnctl start coreapplication_obiccs1 failed
Configuration Action 'Executing: opmnctl start coreapplication_obiccs1' has failed. Please check logs for
opmnctl task failed
Step Executing: opmnctl start coreapplication_obips1 failed
Configuration Action 'Executing: opmnctl start coreapplication_obips1' has failed. Please check logs for Check the log file in ORAINVENTORY, but not see any relevant info.
I then log into Fusion Middleware EM, and see message: 'some components are not available'. Restart and see following errorsSEVERE: Element Type: BI_INSTANCE, Element Id: coreapplication, Operation Result:
FAILED_TO_START, Detail Message: Error in starting one or more components of BI Instance;
Please check the server log files for detailed message.
SEVERE: Element Type: PROCESS, Element Id: coreapplication_obiccs1, Operation Result:
FAILED_TO_START, Detail Message: Operation Failed: start; OracleInstance: BICCH;
Component: coreapplication_obiccs1; msg: 0 of 1 processes started.
Operation Failed: start; OracleInstance: BICCH; Component: coreapplication_obiccs1; msg: 0 of 1 processes started.
[nQSError: 46036] Internal Assertion: Condition rCCSNodeDB.SetConfigInfo(rCCSNodeDB.GetOurNodeId(),
GetClusterServerStartTime()), file server/cluster/clusterserver/Src/CLSMain.cpp, line 262.
What I should do to solve this problem, and where to find the server log file for detailed info about htis issue.Hi,
Chekc this...Might help you....OBIEE 11g Cluster Controller Failed to start
Regards,
Srikanth -
[nQSError: 46036] Internal Assertion: Condition pRightNode
Hi ,
can anyone help me with this . I got the above error when i ran a particular report .
.But the same report works fine without any code fix .
The error message says
[nQSError: 46036] Internal Assertion: Condition pRightNode, file server/Query/Optimizer/ServiceInterfaceMgr/SIMDB/Src/SQOIORGeneratorOracle803.cpp, line 1593
I am working on OBIEEHi
Its too late to post here but i got this error last 2 days back
Hope if anyone could reply to this.
Thank you -
hi when i installing obiee. this kind of error will be show...please clarify my problem please respond my problem asap
[nQSError: 46036] Internal Assertion: Condition GetAdaptersinfo( pAdapterinfo(Padapterinfo.get(),&uloutBufLen)==NO_error,file.\config\SUSystem,configcpp,line1297
Thanks & Regards
Edited by: 799127 on Sep 30, 2010 10:15 AMHi,
I got the same error before, I resolved it by installing a loopback adapter.
Check this link,
Re: OBIEE Installation problem
You can see how to install loopback adpter using the following link..
http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/reqs.htm#BABGCEAI
Thanks,
Vino -
NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition nodes.size() == 1, file server/Query/Optimizer/Navigator/Src/SQONPathJoinConstructor.cpp
can anyone help me understand and resolve this errorHi,
Pls check your connection pool and db connectivity.
You will get these kind of dashboards errors when schema password locked/wrong password, table not available, db not able to connect.
so check on those perspectives...
thanks,
JP -
Dump: ASSERT condition failed - While creating followup to Package quote
Hi,
I am trying to create follow up (Service contract) document to Package Quotation. But, I am endedup with dump in Function Module saying : "ASSERT Condition Failed". And this is happening only in preproduction. In development system, it is working fine. I really do not understand the reason.
last week it worked fine ... but suddenly this error came up.
Please help me out to find the reason and solution.
Thanks,
SandeepHi Arun,
Please check the following in regards to the company code issue:
1. Go to transaction PPOME and search for your Top Org unit,
2. For that org unit, go to the tab Account Assignment.
3. Fill the field Company Code with appropriate value and save it
This should resolve the issue in regards to the message of the company code. The dump refers to the table V_T077D. Please check your number range settings for the customer account groups related to students table V_T077D. Once the necessary customizing is maintained, the problem should get solved.
Good luck.
Rob -
Revision: 16330
Revision: 16330
Author: [email protected]
Date: 2010-05-26 07:55:41 -0700 (Wed, 26 May 2010)
Log Message:
QA: Yes - Ran test locally and it was failing but tested condition was true - there is no services-config.xml file
Doc: No
Checkintests: NA
Details: Updated expected error message to match current error.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/NoServicesConfigFileTest/error.t xtI have uploaded detail.txt at below url.
http://m.uploadedit.com/b041/1413264342685.txt
Hi Mahesh,
According to log file, I find the message ‘The setup100.exe.config file was not found, therefore the DTSWizard and SQLWatson app config files were not replaced’. It seems that the SQL Server setup file is not complete. Please check that if the SQL Server
setup file is corrupted, if it is corrupted, please download it again and reinstall SQL Server 2008 R2.
However, if there’s no problem with the setup file, please check that if there is third-party software such as anti-virus software on your computer blocking the process of SQL Server installation. In addition, make sure that you choose ‘Run as administrator’
to launch the setup and configure SQL Server service accounts appropriately with administrator permission during the installation.
For more details about this error, please review the following similar thread.
http://answers.flyppdevportal.com/categories/sqlserver/sqlsetupandupgrade.aspx?ID=ad794a97-09ae-4aae-9d68-0b06f9af3e16
Thanks,
Lydia Zhang -
Hello
This is my first post so bear with me. I get the 46036 error from Answers when I add a field that I created in the BMM of the RPD. We are on OBIEE 10.3.4.1. I added a logical column to a table and inserted the following expression to filter the business units:
"FinanceDW".""."Finance"."PS_CSU_D_FBUSUNIT"."BUSINESS_UNIT" Like '%CMP%'.
I can check the change in without any errors but when I use that field with that expression I get the nQSError.
There is a blog post that implies some corruption but that is not the case here.
Any insight to this issue would be greatly appreciated.
Regards
Yves HepperleHi,
Refer : http://tipsonobiee.blogspot.com/2009/06/error-nqserror-46036-internal-assertion.html
Regards,
Srikanth -
ASSERTION error in ABAB WD application
Hi,
I am getting below error while testing ABAP web dynpro application
ASSERT condition was voilated
termination type: RABAX_STATE
please suggest how to correct itHi,
Post the ST22 trace to get a better idea.
Also have a look at the below link and check if your case is similar to that.
[Assertion Failed Error|Assertion Failed Error]
Text edit in the table control is a not allowed combination and that caused the error for me.
Maybe you are looking for
-
Please help! I should be getting much better performance! What am I doing wrong?
Hi, there! I've recently started using After Effects CC and I am getting extremely poor performance, especially given my machine specs (or so I believe). Everything is very slow, including the actual software interface. Even with the Live Update swit
-
Install problems - Red Hat 5.2 and Oracle 8.0.5.1
I am trying to install Oracle 8.0.5.1 on 200Mhz/48Meg Intel Pentium system with RedHat 5.2 As I'm rather new to Linux, I decided to find a thorough description of the installation procedure and have used the one on: http://jordan.fortwayne.com/oracle
-
Time Machine Recovery Fails at ~85%
I have a mid-2010 13" MacBook Pro running Mavericks, and a new 2 TB Time Capsule. I'm trying to install a new internal SSD to replace the four-year old one it came with. I swapped the new SSD in with no trouble, and booted my computer into Internet R
-
Hi everybody, new to Mac, can anyone tell me please, do I need to do any maintainence? ie. Disc cleanups or a de-frag?
-
hi all i search a bapi to change price in transaction mr21. I have found several bapi BAPI_MATVAL_PRICE_CHANGE and BAPI_M_REVAL_CREATEPRICECHANGE, but the both can't need it, it doens't change the price. there are two function modul PRICES_CHANGE and