Re: Bloated clients (was: pattern for persistancemanagement)

Geoff,
From what I've understood of Forte's partitioning behaviour, the only way to get rid of b, c, d and e Projects from the client partition is by
deploying them as a shared library and having the Client dynamically
load them at run-time. Any other way, including creating a complex
structure of interfaces to avoid the client referencing the other
projects directly, or even deploying the Server projects as another
Application, will not prevent these projects from being included in the
Client Partition.
The problem I guess is that when we think along the lines of components
we immediately associate them with Service Objects. Clearly, it's the
Project and not the SO which can be classified as a component in Forte.
The questions I have is : Now that we know how Forte's Partioning
mechanism works, would it significantly impact the way we partition our
Apps ? I'm not so sure.
Eric
----Original Message Follows----
Date: Thu, 22 Oct 1998 14:52:29 -0400
From: Geoff Puterbaugh <[email protected]>
To: [email protected]
Subject: Bloated clients (was: pattern for persistance management)
Reply-To: Geoff Puterbaugh <[email protected]>
This topic is of keen interest to me as well. At my customer's
urging, I wrote a little test application spread across
four or five projects, each supplying the next..
a << b << c << d << e
The projects b,c,d, and e each contain a class and a service
object based on that class. I partitioned it (a client
partition and four server partitions for b c d e) and made
a distribution. Then I looked at the client partition
and discovered b c d e were projects for it!
If you code-generate this and run fcompile, you will see
that all the code for all the projects in the entire chain
of supplier projects winds up in the client partition.
To be clear about this, if project e contains a class X,
you will see the source code for X.init and all other
X methods in the client partition.
This appears to be the default behavior, and the open
question is how to change the default behavior, if that
can be done.
All my best,
Geoff
P.S. If e uses GenericDBMS as a supplier, it will show up
in the client too. Of course!
This is at least my understanding as of today.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Similar Messages

Re: pattern for persistance management: the solution?

Thanks to Forte France consulting group and Marc Sonnet (Forte
France), here is one solution for our problem.
We don't have test it yet but this seems pretty good.
thanks for all your replies,
Corinne Barbat
____________________________ Séparateur Réponse ________________________________
Objet : Re: Bloated clients (was: pattern for persistance management
Auteur : [email protected] à _INTERNET
Date : 23/10/98 00:41
Geoff,
Fromhat I've understood of Forte's partitioning behaviour, the only
way to get rid of b, c, d and e Projects from the client partition is by
deploying them as a shared library and having the Client dynamically
load them at run-time. Any other way, including creating a complex
structure of interfaces to avoid the client referencing the other
projects directly, or even deploying the Server projects as another
Application, will not prevent these projects from being included in the
Client Partition.
The problem I guess is that when we think along the lines of components
we immediately associate them with Service Objects. Clearly, it's the
Project and not the SO which can be classified as a component in Forte.
The questions I have is : Now that we know how Forte's Partioning
mechanism works, would it significantly impact the way we partition our
Apps ? I'm not so sure.
Eric
----Original Message Follows----
Date: Thu, 22 Oct 1998 14:52:29 -0400
From: Geoff Puterbaugh <[email protected]>
To: [email protected]
Subject: Bloated clients (was: pattern for persistance management)
Reply-To: Geoff Puterbaugh <[email protected]>
This topic is of keen interest to me as well. At my customer's
urging, I wrote a little test application spread across
four or five projects, each supplying the next..
a << b << c << d << e
The projects b,c,d, and e each contain a class and a service
object based on that class. I partitioned it (a client
partition and four server partitions for b c d e) and made
a distribution. Then I looked at the client partition
and discovered b c d e were projects for it!
If you code-generate this and run fcompile, you will see
that all the code for all the projects in the entire chain
of supplier projects winds up in the client partition.
To be clear about this, if project e contains a class X,
you will see the source code for X.init and all other
X methods in the client partition.
This appears to be the default behavior, and the open
question is how to change the default behavior, if that
can be done.
All my best,
Geoff
P.S. If e uses GenericDBMS as a supplier, it will show up
in the client too. Of course!
This is at least my understanding as of today.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Thanks to Forte France consulting group and Marc Sonnet (Forte
France), here is one solution for our problem.
We don't have test it yet but this seems pretty good.
thanks for all your replies,
Corinne Barbat
____________________________ Séparateur Réponse ________________________________
Objet : Re: Bloated clients (was: pattern for persistance management
Auteur : [email protected] à _INTERNET
Date : 23/10/98 00:41
Geoff,
Fromhat I've understood of Forte's partitioning behaviour, the only
way to get rid of b, c, d and e Projects from the client partition is by
deploying them as a shared library and having the Client dynamically
load them at run-time. Any other way, including creating a complex
structure of interfaces to avoid the client referencing the other
projects directly, or even deploying the Server projects as another
Application, will not prevent these projects from being included in the
Client Partition.
The problem I guess is that when we think along the lines of components
we immediately associate them with Service Objects. Clearly, it's the
Project and not the SO which can be classified as a component in Forte.
The questions I have is : Now that we know how Forte's Partioning
mechanism works, would it significantly impact the way we partition our
Apps ? I'm not so sure.
Eric
----Original Message Follows----
Date: Thu, 22 Oct 1998 14:52:29 -0400
From: Geoff Puterbaugh <[email protected]>
To: [email protected]
Subject: Bloated clients (was: pattern for persistance management)
Reply-To: Geoff Puterbaugh <[email protected]>
This topic is of keen interest to me as well. At my customer's
urging, I wrote a little test application spread across
four or five projects, each supplying the next..
a << b << c << d << e
The projects b,c,d, and e each contain a class and a service
object based on that class. I partitioned it (a client
partition and four server partitions for b c d e) and made
a distribution. Then I looked at the client partition
and discovered b c d e were projects for it!
If you code-generate this and run fcompile, you will see
that all the code for all the projects in the entire chain
of supplier projects winds up in the client partition.
To be clear about this, if project e contains a class X,
you will see the source code for X.init and all other
X methods in the client partition.
This appears to be the default behavior, and the open
question is how to change the default behavior, if that
can be done.
All my best,
Geoff
P.S. If e uses GenericDBMS as a supplier, it will show up
in the client too. Of course!
This is at least my understanding as of today.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Design patterns for updating a fact table

I have a fact table and about 10 dimensions.
One of these dimensions can be missing values, so the fact table row will link to an UNKNOWN value.
When the correct value is finally entered in the dimension table i want to update any associated fact rows.
Whats the most efficient way of doing this?

I know i have to use a lookup transformation ;-)
I wouldnt be at teh stage of even having a fact table if i didnt know that! I was looking for a design pattern, not the name of a shape!
The solution i went with was to take a hard line on any rows with unknown values. If when importing the data there are unknown values for two of the most important dimensions, those rows are not inserted into the fact table, but instead pushed to an ErrorLog
table.
Users run a report that shows what this table contains and if they really want those rows, they insert the correct dimension values and rerun the import, which will only import any rows not already in the fact table.
This way:
1. all sorting & filtering issues are resolved as there will be no unknown rows for the most important dimensions used in sorting and filtering.
2. we can quickly see any rows with unknown values and figure out whats wrong. its always missing reference data that the client didnt think to give us. a quick insert of the dimension data and import and the rows get imported.
thanks for the replies.

Flex design pattern for BlazeDS transfer objects

Dear Community,
I have a question regarding the nature of objects transferd from BlazeDS backend to the Flex client.
According to some adobe docs all the presentation logic should be in flex and BlazeDS should provide only services.
The question is what kind of transfer objects should be used? with what level of abstraction?
To make it more clear let's talk about a simple forum application like adobe forums.
I have created a Forum service, which returns a Forum transfer object, which has a List of Threads, with each thread having a List of Messages.
Flex gets the Forum transfer object and does all the presentaiton work.
This is a very nice seperatin of concerns architecture BUT there are two major performance issues:
- when the forum becomes bigger the transfer object will be huge
- the flex will use huge client resources to create the presentation of the forum transfer object.
So my question is what is your strategy/ design pattern for such a problem.
An obvious answer would be create services that include the presentation logic and use transfor objects like ThreadListPage which will include only the first 10 threads.
Thanks in advance

I think you are going to get a few varied types of answers to a general question like this, but I will comment on a few things. First, you should only be transmitting the data that you need to use or display to the user at the time. If this forum was implemented in Flex (I wish) you wouldn't transfer the text for all the threads. You might not transfer the thread text at all (just the subjects), you'd make calls back to the server to fetch that data when and if you need it.
Also, I think you are overestimating the resources required for the Flex "presentation layer". If you think about it, these workstations we have here are pretty idle most of the time when you're at a website. Nowadays there's plenty of processing power just sitting there waiting, so as long as your design isn't flawed the CPU or memory are rarely going to be a bottleneck with Flex.
The way I design, BlazeDS (or GraniteDS etc) should mostly just be "serving data". There is some flexibility available, for example I don't see a problem with putting certain types of business rules (such as a limit on the number of results that can be recieved in a search) within server side code, and validation rules on the Flex side. So there's not too many "industry standards" in Flex yet beyond maybe what's done in the various standard architectures, at least not that I'm aware of.
You might find it beneficial to look into some of the various frameworks/architectures available like Cairngorm, Mate, Swiz, and so on. Learning how they work (looking at examples) would probably answer some of your questions too.

What is the best design pattern for this problem?

No code to go with the question. I am trying to settle on the best design pattern for the problem before I code. I want to use an Object Oriented approach.
I have included a basic UML diagram of what I was thinking so far.
Stated simply, I have three devices; Module, Wired Modem, and Wireless Modem.
In the Device Under Test parent class, I have put the attributes that are variable from device to device, but common to all of them.
In the child classes, I have put the attributes that are not variable to each copy of that device. The attributes are common across device types. I was planning to use controls in the class definition that have the data set to a default value, since it doesn't change for each serial number of that device. For example, a Module will always have a Device Type ID of 1. These values are used to query the database.
An example query would be [DHR].[GetDeviceActiveVersions] '39288', 1, '4/26/2012 12:18:52 PM'
The '1' is the device type ID, the 39288 is the serial number, and the return would be "A000" or "S002", for example.
So, I would be pulling the Serial Number and Device Type ID from the Device Under Test parent and child, and passing them to the Database using a SQL string stored in the control of the Active Versions child class of Database.
The overall idea is that the same data is used to send multiple queries to the database and receiving back various data that I then evaluate for pass of fail, and for date order.
What I can't settle on is the approach. Should it be a Strategy pattern, A Chain of Command pattern, a Decorator pattern or something else.
Ideas?

elrathia wrote:
Hi Ben,
I haven't much idea of how override works and when you would use it and why. I'm the newest of the new here.
Good. At least you will not be smaking with a OPPer dOOPer hammer if I make some gramatical mistake.
You may want to look at this thread in the BreakPoint where i trie to help Cory get a handle on Dynamic Dispatching with an example of two classes that inherit from a common parent and invoke Over-ride VIs to do the same thing but with wildly varying results.
The example uses a Class of "Numeric" and a sibling class "Text" and the both implement an Add method.
It is dirt simple and Cory did a decent job of explaining it.
It just be the motivation you are looking for.
have fun!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Error in receiver Mail adapter: Client was not authenticated

Hi.
My requirement is to send email via PI to an extermal mail address. I am trying to use the following configuation for the same.
Tramsport Protocol: SMTP
Message Protocol: XIPAYLOAD
URL: To get the value of URL, execute transaction SCOT in PI system. Double click on SMTP and get the Mail host from there (name). So the URL has been specified as smtp://name
Comfigure User authentication - Checked
User: My outlook email address
Password: My outlook email password
From: My outlook email address
To: External address to which the email needs to be sent
Content encoding: base64
But the email is not getting sent. when I check the adapter engine I see the errors:
Mail: error occured: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated
Mail: error occured: com.sap.aii.af.lib.mp.module.ModuleException
MP: exception caught with cause com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated
Adapter Framework caught exception: Failed to call the endpoint
Delivering the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.af.sdk.xi.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: server not responding OK to MAIL FROM; 530 5.7.1 Client was not authenticated.
Can anyone please suggest what changes are needed to make this work?
Any help is greatly appreciated.
Thanks.
Anuradha.

HI Anuradha,
Check the below link for receiver mail configuration and follow the steps accordingly.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0a27c01-26b0-2c10-bd8a-94498efa7ff6?quicklink=index&overridelayout=true
Regards,
Naveen

This method should not be called anymore. The client was already released i

Hi,
while configuring Business Packager for Projects 50.3 fo, we made few changes in R/3 side as per the documentation. after that we are getting following error in portal
"This method should not be called anymore. The client was already released into the pool or the pool entry was deleted"
all the chages were reverted in R/3 system still we are getting the same error.
Can any one help on this issue....
Thanks in advance and for early responce higher marks would be awarded!!!..
Regards
Ravi Sankar Karri

Hi,
Well there were errors in how stop works:
"Stopping a thread with Thread.stop causes it to
unlock all of the monitors that it has locked (as a
natural consequence of the unchecked ThreadDeath
exception propagating up the stack). If any of the
objects previously protected by these monitors were in
an inconsistent state, the damaged objects become
visible to other threads, potentially resulting in
arbitrary behavior. "
I do understand that you want to have something like
killTheTreadIDontCareAboutConcequences-method, but
it's better to let all your methods that you want to
be able to terminate take a timeout argument, and deal
with the termination in the method. (Close the
sockets/streams etc that you are blocking on).
/KajThe point is, it is not always possible to make those blocking methods stop, via some magic "timeout" thingamabob. The bottom line is still that the blocking methods were written incorrectly to begin with (to possibly block indefinitely), so one cannot come up with an across-the-board solution, other than getting the root cause fixed in the first place. However, one is not always in control of fixing the root cause.

E-mail pattern for self registration screen

Hello,
We are using WAS version 7.01 SP3 .
We configured the UME to enable self registration.
The generated password sent via Email and everything working correct.
The only problem is that the user can use wrong E-mail pattern and the creation process will continue
(User will create in the system with wrong E-mail pattern for example - XYZ).
When we tried to create user with wrong E-mail pattern in the standard user creation program it raised error message.
We are using the default E-mail pattern on the Configtool.
Is there any way to stop the self registration process if the user enter wrong E-mail pattern?
Thanks for the help
Nir

Hi,
You can try forcing the application to quit as described here:
+To force an application to close, follow these steps:+
+iPhone or iPod touch running iPhone OS 3.0 or later+
+Press and hold the Sleep/Wake button until the red slider appears. When the red slider appears, release the Sleep/Wake button.+
+Instead of dragging the red slider, press and hold the Home button for six seconds.+
+If the device does not return to the Home screen, see the steps below to restart.+
from: http://support.apple.com/kb/TS1445
If the issue persists, you should try restarting before trying to reset.
You can restart the iPhone by holding the Sleep/Wake button until the red slider appears> then slide to turn off> and turn the iPhone back on by pressing the Sleep/Wake again, as described on page 46 of the iPhone User Guide.
http://manuals.info.apple.com/en/iPhoneUserGuide.pdf
-Jason

The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumar

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif

Remote Server returned '530 5.7.1 Client was not authenticated'

Hello,
I migrating from Exchange 2007 to Exchange 2013.
The Exchange 2007 infrastructure look like:
-2 CAS ( Hub1 and Hub2)
-2 MBX ( mbx1 and mbx2)
We add Exchange 2013 in the mix
2 CAS ( CAS-2K13-1 and CAS-2K13-2)
2 MBX ( MBX-2K13-1 and MBX-2K13-2)
All mailbox are curently on Exchange 2007. All inbound email pass by a SMTP Relay who forward the email to a NLB of Exchange 2013.
The send connector (internet) forward email to the SMTP relay, and the source server are only 2K7 server.
My problems is : if I replace the two 2K7 server from the source server for the 2K13 MBX, I receive this message:
The following organization refuse your message: MBX-2K13-1.contoso.com
Generation server : MBX-2K13-2.contoso.com
[email protected]
MBX-2K13-1.contoso.com
Remote Server returned '530 5.7.1 Client was not authenticated'
idea?

Do you smarthost from the send connector to another SMTP gateway?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

530 5.7.1 client was not authenticated

OK, I am not in control of an exchange server. My company uses GoDaddy for our exchange server. I am an employee. We use a software for contact management. When I try to send emails to say a group of customers, it gives me the error
530 5.7.1 client was not authenticated. I have talked to GoDaddy until I am blue in the face to no avail. Everything I find says it is something on their end. By the way, we just switched to them, we have absolutely no problem with our previous
company that we had exchange with. ANY help would be appreciated. OF course our outlook works.
The only information our software (called RPMS) requires is the SMTP server which I enter smtp.ex3.secureserver.net
my email address (*****@alliedsm.com
user name which they say is the same as email address (*****@alliedsm.com) and password. My old exchange service had me use port 27, but new company says I have to use 587.

In the outbound smtp setting did you set outgoing smtp requires authentication?
Microsoft Outlook® 2007 (PC)
From the Tools menu, select "Account Settings"
Select your Network Solutions Email account and click the "Change" button above..
Click the "More Settings" button in the bottom-right corner of the E-Mail Accounts window.
In the Internet Email Settings window, click the "Outgoing Server" tab. Ensure that the box next to "My outgoing server (SMTP) requires authentication" is checked and "use same settings as my incoming mail server" is selected.
Click the "Advanced" tab and make sure that "Use the following type of encrypted connection" is set to "None" for the incoming (POP3) and the outgoing (SMTP) port settings. Change the outgoing server port to 587.
James Chong MCITP | EA | EMA; MCSE | M+, S+ Security+, Project+, ITIL msexchangetips.blogspot.com

530 5.7.1 Client was not authenticated - Exchange 2013 to external domains

Hi all,
I have an Exchange server 2013 on windows 2012 R2 and do all the configuration for sending and receiving the mail according to the document provided by Microsoft.
But whenever I am trying to send mails from external domains to my exchange server domain I got the following error:
530 5.7.1 Client was not authenticated
Same thing I am getting If I am sending mail through outlook from my Exchange domains to external domain.
But if I am selecting the
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">Anonymous
users in the security option of Default Frontend XXXX, I am able to send the mails through outlook.</label>
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">But I don't
want to use this option as it will enable to send the mails without validating the Exchange server user name and password.</label>
SO can anyone please suggest some solutions to resolve this as using Anonymous users fro sending and receiving mails is not secure.
Regards
Pankaj Raman.
<label for="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers" id="ResultPanePlaceHolder_ReceiveConnector_Security_contentContainer_chkPermissionGroupAnonymousUsers_label">
</label>

I have a java code for sending mails using the SMTP address of the servers. For sending a mail it required a valid user name and password. For all other SMTP servers if I have used invalid user name and password then I am getting the 530
5.7.1 Client was not authenticated error, but
if I am using my SMTP address and invalid user name and password then also I am able to send the mails.
So I just want to know what I have to configure in the exchange 2013 server so that it will validate the user name and password.
Regards
Pankaj Raman.
Hi Pankaj,
Thank you for your question.
Was invalid user name and password included in Java code?
Did outlook send emails?
If this issue happen on Java code instead of outlook?
In fact, Exchange server didn’t validate user account and password, user account and password will be validated on domain controller,
I suggest we create a new dedicated receive connector and enable “anonymous” permission for java code
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Javax.mail.MessagingException: 505 Client was not authenticated

Hi!,
I got the following error:
Exception in thread "main" javax.mail.MessagingException: 505 Client was not authenticated
at com.sun.mail.smtp.SMTPTransport.issueCommand(SMTPTransport.java:507)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:312)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:168)
at HelloMail.main(HelloMail.java:35)
This is the code:
To send an email I need authentification, and I include the mail.smtp.auth propertie and
"message.saveChanges();
Transport transport = session.getTransport("smtp");
transport.connect("mail.xxx.com.mx","harriaga",passw);
transport.sendMessage(message,message.getAllRecipients());
transport.close();"
Do you know if I am skip something.
import java.util.Properties;
import javax.mail.*;
import javax.mail.internet.*;
public class HelloMail {
public static void main(String args[]) throws Exception {
String host="mail.xxx.com.mx"; //obviously doesn't work
String from="[email protected]"; //sender's email
String to ="[email protected]" ; //receiver's email
Properties props = System.getProperties();
props.put("mail.smtp.host", host);
props.put("mail.smtp.auth", "true");
Session session=Session.getInstance(props,null);
MimeMessage message = new MimeMessage(session);
message.setFrom(new InternetAddress(from));
message.addRecipient(Message.RecipientType.TO, new
InternetAddress(to));
message.setSubject(" My Test HTML email ");
message.setText(" Here is the content ");
message.saveChanges();
Transport transport = session.getTransport("smtp");
transport.connect("mail.xxx.com.mx","harriaga",passw);
transport.sendMessage(message,message.getAllRecipients());
transport.close();
Thanks for all,
HAG.

HAG,
you need to create a session object passing a valid authenticator. In other words,
MyAuthenticator auth = new MyAuthenticator ();
Session session = Session.getInstance(props, auth);where MyAuthenticator is something like
public class MyAuthenticator extends Authenticator{
public PasswordAuthentication getPasswordAutentication(){
return new PasswordAuthentication( "user", "password");
}You obviously need to replace username and password with data valid for your e-mail account.
Hope this helps,
gulfi

"530 5.7.1 Client was not authenticated" Error with mail service

Hi,
I have some problem with Mail service with the Webspaces application. I have configured the Service (with MS Exchange server) with WebSpaces Application with the required IMAP, SMTP, External Application and LDAP Settings correctly. I opened the Mail Page and Logged in with the
user credentials. I am able to see the incoming mails , But when I try to send a mail I am getting the following exception. For some reason, SMTP send is failing. I did the same IMAP and SMTP settings in MS Outlook and successfully sent the mail. what could be the problem? Please repond.
oracle.webcenter.collab.mail.MailException: Failed to send the message with subject "Test". Further information: 530 5.7.1 Client was not authenticated
     at oracle.webcenter.collab.mail.MailSession.sendMessage(MailSession.java:864)
     at oracle.webcenter.collab.mail.view.backing.MessageHandler.sendMessage(MessageHandler.java:528)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
     at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
     at org.apache.myfaces.trinidadinternal.taglib.util.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:53)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.broadcastToMethodBinding(UIXComponentBase.java:1245)
     at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:183)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:298)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:91)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:87)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:298)
     at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:91)
     at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:81)
     at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
     at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:673)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
     at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.portlet.client.adapter.adf.ADFPortletFilter.doFilter(ADFPortletFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterShellPageRedirectionFilter.doFilter(WebCenterShellPageRedirectionFilter.java:210)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterShellFilter.doFilter(WebCenterShellFilter.java:603)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.view.page.editor.webapp.WebCenterComposerFilter.doFilter(WebCenterComposerFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.share.http.ServletADFFilter.doFilter(ServletADFFilter.java:65)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
     at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
     at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.processFilters(WebCenterLocaleWrapperFilter.java:256)
     at oracle.webcenter.webcenterapp.internal.view.webapp.WebCenterLocaleWrapperFilter.doFilter(WebCenterLocaleWrapperFilter.java:215)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.1 Client was not authenticated
     at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1388)
     at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:959)
     at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:583)
     at oracle.webcenter.collab.mail.MailSession.sendMessage(MailSession.java:850)
Edited by: indra_owc on Jan 9, 2010 6:14 PM

The server probably wants you to use the STARTTLS command before you authenticate.
See the com.sun.mail.smtp package javadocs for the property to set to enable that.

Email Notification - ERROR: 530 5.7.1 Client was not authenticated

Hi People!
I am receiving the follows error when I run scheduled task. Also, I used Javamail and I have the same problem. The problem: MAIL FROM isn´t authenticating. How can I solve it?
Other question: How can I configure Email Notification in debug?
Thanks!
API Code (Schedule task)
this.dataProvider = getDataBase();
tcEmailNotificationUtil emaildef = new tcEmailNotificationUtil(dataProvider);
emaildef.setSubject("User: " + s2);
emaildef.setFromAddress(fromaddr);
emaildef.setBody("OIM has detected a modify in Active Directory. " );
emaildef.sendEmail(toaddr);
System Configuration->XL.MailServer=Email Server
IT Resource 'Email server'
Name Email Server
Auth : true
Server name : exchange server name
User name : <domain name>\User name
Password :: Password of that user
ERROR
ERROR,11 Jan 2011 18:18:00,375,[XELLERATE.REQUESTS],Class/Method: tcEmailNotificationUtil/sendEmail encounter some problems: 530 5.7.1 Client was not authenticated
com.sun.mail.smtp.SMTPSendFailedException: 530 5.7.1 Client was not authenticated
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:1388)
at com.sun.mail.smtp.SMTPTransport.mailFrom(SMTPTransport.java:959)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:583)
at javax.mail.Transport.send0(Transport.java:169)
at javax.mail.Transport.send(Transport.java:98)
at com.thortech.xl.dataobj.util.tcEmailNotificationUtil.sendEmail(Unknown Source)
at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processUserChange(ActiveDirectoryReconTask.java:657)
at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.processBatch(ActiveDirectoryReconTask.java:341)
at com.thortech.xl.integration.ActiveDirectory.tcADUtilLDAPController.searchResultPageEnum(Unknown Source)
at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.performReconciliation(ActiveDirectoryReconTask.java:248)
at com.thortech.xl.schedule.tasks.ActiveDirectoryReconTask.execute(ActiveDirectoryReconTask.java:97)
at com.thortech.xl.scheduler.tasks.SchedulerBaseTask.run(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper$TaskExecutionAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.security.Security.runAs(Security.java:41)
at Thor.API.Security.LoginHandler.weblogicLoginSession.runAs(Unknown Source)
at com.thortech.xl.scheduler.core.quartz.QuartzWrapper.execute(Unknown Source)
at org.quartz.core.JobRunShell.run(JobRunShell.java:178)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:477)
--------------------------------------------------------------------------------

Thanks Justin,
for all your help and support.
there was some settings to be done in the exchange server. and today the system admin co-operated with me and did the changes in the exchange.
now the messaging is working fine.
Thanks,
Rashed

Re: Bloated clients (was: pattern for persistancemanagement)

Similar Messages

Maybe you are looking for