[RE] BMP run happen error after ejbCreate

when i call a BMP in client,i met the following error:
this happened when after ejbCreat(), when return a PK class, it poped up this error:
when can help me have a look,thx~!
-source of ejbCreate---------------------------------------------------------------------
pstmt = conn.prepareStatement("insert into accounts (id, ownerName, balance) values (?, ?, ?)");
pstmt.setString(1, accountID);
pstmt.setString(2, ownerName);
pstmt.setDouble(3, balance);
pstmt.executeUpdate();
System.out.println("after insert in bean!");
* Generate the Primary Key and return it
return new AccountPK(accountID);
-errors----------------------------------------------------------------------
java.rmi.ServerException: RemoteException occurred in server thread; nested exce
ption is:
java.rmi.RemoteException: nested exception is: java.lang.RuntimeExceptio
n: Unable to create reference org.omg.CORBA.OBJ_ADAPTER: minor code: 139808050
3 completed: No; nested exception is:
java.lang.RuntimeException: Unable to create reference org.omg.CORBA.OBJ
_ADAPTER: minor code: 1398080503 completed: No
java.rmi.RemoteException: nested exception is: java.lang.RuntimeException: Unabl
e to create reference org.omg.CORBA.OBJ_ADAPTER: minor code: 1398080503 compl
eted: No; nested exception is:
java.lang.RuntimeException: Unable to create reference org.omg.CORBA.OBJ
_ADAPTER: minor code: 1398080503 completed: No
java.lang.RuntimeException: Unable to create reference org.omg.CORBA.OBJ_ADAPTER
: minor code: 1398080503 completed: No
<<no stack trace available>>

It tried to search a corresponding problem from the MSDN, but the possibility of searching for it was not.
The place help which is a urgent problem there is not a place where it will receive. Occasionally the question which is identical one notice board the possibility of searching for it is but is not reply.
Help me.

Similar Messages

  • Run time error after starting eclipse

    Hello,
    after installation of the SAP Eclipse Theme Editor the following run time error is reported after each restart of eclipse:
    java.lang.ClassCastException: com.sap.ur.plugins.ThemeEditor32Input cannot be cast to com.sap.ur.plugins.ThemeEditorInput
         at com.sap.ur.plugins.ThemeEditor.init(ThemeEditor.java:188)
         at org.eclipse.ui.internal.EditorManager.createSite(EditorManager.java:798)
         at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:647)
         at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)
         at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
         at org.eclipse.ui.internal.EditorAreaHelper.setVisibleEditor(EditorAreaHelper.java:271)
         at org.eclipse.ui.internal.EditorManager.setVisibleEditor(EditorManager.java:1429)
         at org.eclipse.ui.internal.EditorManager$5.runWithException(EditorManager.java:942)
         at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
         at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
         at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
         at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
         at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:803)
         at org.eclipse.ui.internal.Workbench$31.runWithException(Workbench.java:1567)
         at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31)
         at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35)
         at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134)
         at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:4041)
         at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3660)
         at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2548)
         at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2438)
         at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:671)
         at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
         at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:664)
         at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
         at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:115)
         at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
         at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:369)
         at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:620)
         at org.eclipse.equinox.launcher.Main.basicRun(Main.java:575)
         at org.eclipse.equinox.launcher.Main.run(Main.java:1408)
    I can work with this editor anyway after choosing the project. But I still have a problem because the preview will not change when I choose a different UI element. The preview alway shows the text "welcome to the SAP ThemeEditor!".  When I modify style parameters for the UI element Text the preview is modified in the right way. I already set the Internet Options for the Internet Explorer as suggested. Is it possible that the reported run time error is the reason for the preview problems? The external preview works fine.

    Hi,
    I would suggest you to remove NWDS, then ensure that nothing left on the disk related to NWDS, and then try a fresh install.
    Best Regards,
    Ervin

  • Portal Run time error after deploying custom logon page par file in portal

    Hi Experts,
       We have customized the standard portal logon par file for client XYZ and imported it with the same name (com.sap.portal.runtime.logon.par)  in portal.
       It is working fine for XYZ . And another client ABC wants the same customization for them also. So we took the par file from XYZ and imported it in ABC system. But in ABC system, we are getting Portal Run time Error. When we checked the logs, it is showing error in LogonBean class.Wwe have included the necesary jar files. Could anyone help us in identifying what is missing?
    Thanks
    VJ

    Hello Vijay,
    Please paste or attach the error log.
    Regards,
    Haseena

  • Portal Run time error after changing the logon screen

    Hi all,
    I am running an EP7 SP08 and I try to change the logon screen as described on:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0e240beb0702ae10000000a155106/frameset.htm
    I copied the 'com.sap.portal.runtime.logon.par.bak' file, renamed it to 'my.new.logon.par'. after that I extracted the file with winzip. I opened the directory 'PORTAL-INF\lib\' and there I extracted the file 'umelogonbase.jar' with winrar. I opened the  file 'logonLabels_en.properties' and changed the entry 'xtit_WELCOME=Welcome' to 'xtit_WELCOME=blablabla'.
    I repacked the umelogonbase.jar with winrar again and after that I repacked the 'my.new.logon.par' with winzip again.
    Then I placed the par file back at '<J2EE_Engine_Instance>\j2ee\cluster\server<X>\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd' and changed the authscheme.xml with the new par file and changed the 'login.authschemes.definition.file'  all described on the help.sap.com url mentioned above.
    However, when I restart the portal and open the logon screen I see the error message:
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : N/A
    Component Name : N/A
    The exception was logged. Inform your system administrator..
    See the details for the exception ID in the log file
    The default trace shows the following message:
    An error occured during authscheme computation.
    [EXCEPTION]
    com.sapportals.portal.prt.component.PortalComponentException: Error in init method
    Component : my.new.logon.certlogon
    Is there anyone who knows what goes wrong? The description on help.sap.com is very straightforward but still it doesn't work for me...
    Any help would be appreciated.
    Kind Regards,
    Nico van der Linden...

    Hi,
      Check if you did the following steps pertaining to the authschemes.xml file:
    --> Download the authschemes.xml to local drive. Rename the file to,say, authschemes_new.xml
    --> In authschemes_new.xml, did you change <b>all</b> entries of com.sap.portal.runtime.logon with the name of modified logon par file?
    -->Upload the authschemes_new.xml file using configtool; and, change the property login.authschemes.definition.file to authschemes_new.xml in configtool.
    -->Finally,restart your portal. Hope it helps.
    Regards,
    M.Subathra

  • Run time Error while Creating Expense request

    Dear Friends ,
    In   E-Payment ( Expense  Claim )   creation , While clicking on Enter Receipts application is going to run time error for only one user.    
    Run time Error Info :
    Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
    Exception              CX_SY_REF_IS_INITIAL
    Short text
         Access via 'NULL' object reference not possible.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
    Error analysis  
        An exception occurred that is explained in detail below.
       The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
        caught in
       procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
       Since the caller of the procedure could not have anticipated that the
       exception would occur, the current program is terminated.
       The reason for the exception is:
       You attempted to use a 'NULL' object reference (points to 'nothing')
       access a component (variable: "LR_CONTEXT_ELEMENT").
       An object reference must point to an object (an instance of a class)
       before it can be used to access components.
       Either the reference was never set or it was set to 'NULL' using the
       CLEAR statement.
    How to correct the error 
         Probably the only way to eliminate the error is to correct the program.
       If the error occures in a non-modified SAP program, you may be able to
       find an interim solution in an SAP Note.
       If you have access to SAP Notes, carry out a search with the following
       keywords:
       "OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
       "CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
       "PRESET"
    Information on where terminated
        Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
         in "PRESET".
        The main program was "SAPMHTTP ".
        In the source code you have the termination point in line 60
        of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
        The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
        procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
        in the RAISING clause of its signature.
        The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
         code begins in line
        1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
    Regards,
    Suresh .

    Hi Agrawal
    As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
    close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
    Regards
    Srinath

  • Run time error while creating a sales order by va01

    hi ,
         while  i am creating a sales order a runtime error occurs as i fill entry for sole to party and then material and quantity and as i press enter. the run time error is:
    error in current abap program "saplv61z"  had to be terminated because it has come across the statement that unfortunately can not be executed.
    kindly solve my problem.
    thanks.

    Hi Agrawal
    As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
    close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
    Regards
    Srinath

  • Run time error while Creating IDN and Inbound Delivery

    Hi All,
    I am getting Run time error while creating Inbound Delivery Notification from Inbound Queue and Inbound Delivery from IDN
    After debugging i come to know that system is looking for Patch Level SAPKNA7026 but in my system Patch is upto SAPKNA7022
    Is there any OSS notes available to deactivate/resolve this run time error ? I tried 0001798794 Deactivation of hierarchical access functionality but system is still giving me run time error
    Regards,
    P@M

    Hi Agrawal
    As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
    close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
    Regards
    Srinath

  • Microsoft C++ RUN LIBRARY Error In DTW.

    Hi All..
    At the time of Importing the templates through Dtw i am getting tis Microsoft C++ Run Library Error after that its not allow me to import the Data through Dtw .Please provided the solution asap
    Thanks

    Hi,
    I also facing the same problem when I used DTW.   Previously I use no issue on this.  I've tried on client pc and server also having the same problem.
    SAP Business One 2007B SP:00 PL:16
    I tried to uninstall and reinstall DTW and it still giving me the same problem.
    Please advice.
    Thank you.
    Regards,
    Foong Yee

  • ABAP Program gives error after running  successfully for few days / months

    I have a problem that sometimes my programs start giving errors or does not run at all after successfully running for few days / months.
    But, when I copy the same program with a different name (without any changes ) it starts running again.
    Yesterday I had another problem. I was sending a request to be transported to Production Client, and the request was not getting transported. But when I changed just the name of the program, It was transported to Production Client.
    I can't understand where the problem lies and what happens to the programs after running successfully for few days. All I have to do is just copy that programm into another name and it starts running.
    Can anyone help me?
    Regards,
    SK Daniel

    about the transport thing..i had the same problem few months back the reason was,  i included a table which is having different package  from my program..so wot im thinking is when you creating a different program u might be assigning different package to this new program  and this package is same as all the tables included in your program...
    regards

  • HT1925 After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll can't be found, APSDaemon.exe not running".  Windows 7.

    After failed update of itunes yesterday, now will not run with error message "MSVCR80.dll not found" APSDaemon.exe will not run.  itunes will not now run.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens

    Hi I replaced my hard drive on macbook and I want to install mac osx10.5 with the CD that came with the macbook. When I run the CD after a while I get the page showing language options for 2 second then a gray screen appears and nothing happens. I partitioned my hard drive and I tried installing Microsoft windows and that worked just fine.  But I do not understand why it wont install mac os x 10.5?????  PLEASE HELP ME.  Thanks  Hamid

    Try a new post in the 10.5 Installation forum.
    DALE

  • Break execution after custom run-time error handler callback

    I am using Teststand 2010 SP1 and have written a custom runtime error handler based on the ErrorHandlerExample example that ships with TestStand. It has been implemented as a StationPostStepRuntimeError callback in my Station Callbacks folder.  I have modified the example as follows:
    (1) Added code to turn off the UUT transmitter if it was on.
    (2) Added a call to an executable that sends an email to the currently logged in user.
    (3) Calls the standard TestStand run-time error dialog using the Engine DisplayRunTimeErrorDialog method.
    (4) Processes the user's selection, then turns on the UUT transmitter for any option other then Abort.
    The callback also checks the status of the Break and "Don't Show again for this execution" options selected by the user.  If the user selects Break then the only option I can find is to call the API Execution.Break() method which breaks the execution right there in my callback. The user then has to single step there way out of the callback.   Is there a way of instructing TestStand to complete the callback execution and break immediately after completing the callback (i.e.at the step following the error)?  I've zipped up and attached my modified sequence.
    Alternatively, is there a better way of doing this?
    Regards,
    David
    Solved!
    Go to Solution.
    Attachments:
    StationCallbacks.7z ‏13 KB

    Didn't have a chance to try it yet but maybe StepOut is your solution?
    From the TS Help:
    StepOut Method
    Syntax
    Execution.StepOut
    Purpose
    Resumes the execution from a suspended state and then suspends the execution again after execution of the current sequence completes.
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~

  • Run-Time Error '6' Overflow within BEx Analyzer after copy/paste query

    Hi all,
    User is getting a "Run-time error '6' overflow" message which is caused after copying any query in a 'query pack' to any free row/column within the same sheet (BEx Analyzer). This "query pack" has multiple queries within one sheet and covers 1800 rows so there is enough free space left for copying one of the queries to another position in the same sheet.
    Microsoft Office Excel SP2 is used which is part of MS Office professional edition 2003. The BW version is 3.0.
    Please let me know if more details are required or above mentioned error message is recognized and can be explained.
    Thanks and kind regards,
    Raymond Flaton

    Hi VRV,
      This error is caused whenever there is memory issue. If your query is built on a cube which has a BWA index then this problem can be related to the issue with the BWA server. Check your BASIS team to check if there is memory issue presently in the BWA server.
    Sometimes the issue is temporary, where the several users accesing the reports to fetch data from BWA lead to this type of error as the BWA gets overloaded. Try exiting the report and run it after some time again.
    Alternatively you can also try restricitng the selection for fetching the data in the report as suggested.
    Thanks

  • After updating my itunes per the update notice I received a run-time error R6034 message. Now I am unable to use iTunes. What can I do to repair this error?

    After updating my iTunes per the update notice I received a run-time error R6034. Now I am unable to access iTunes at all.
    Can someone tell me how to correct this problem?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • TS3694 I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

    I'm running XP. After downloading the latest itunes update i get a "Runtime error" and can't start itunes. Help?

    iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
    Solving MSVCR80 issue and Windows iTunes install issues.
    Thanks to user turingtest2 for this solution.
    Solving MSVCR80 issue and Windows iTunes install issues.
    If the above doesn’t do the trick entirely, then use the instructions in the following as it applies to the version of Windows you are using:
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    You may be required to boot into safe mode to complete the folder deletion process.

Maybe you are looking for

  • Getting "Memory is Full" error

    I am collecting large amounts of data from an Acqiris AP235 PCI card (basically an 8-bit digitizer with firmware for on-board analysis). The card is in a computer with an Intel Core2 (aka Core2 Duo) 6600 and 2 GB of ram running WINXP Pro. Before init

  • Spry tabbed panels not opening in IE on Vista

    Link: About page Link: Story page Spry tabbed panels on these pages display fine in Firefox and Safari. But in IE on two separate Vista-running PCs, everything except the tabs themselves loads, until you click refresh one or more times. Both PCs were

  • Is it possible to get it unlocked an verizon iphone 4s?

    I've verizon iphone 4S which i bought last nov (2011). If i cancel my contract and pay the amount to verizon, is it possible to get my iphone unlocked so that i could use with other SIM card? Also is it possible to use this phone in GSM network? Ples

  • High CPU 7206VXR - Removed Traffic but CPU didnt move - Any ideas what is keeping it high?

    CPU utilization for five seconds: 97%/95%; one minute: 97%; five minutes: 94%  PID Runtime(ms)   Invoked      uSecs   5Sec   1Min   5Min TTY Process    1     2612932   3551909        735  0.08%  0.18%  0.16%   0 Chunk Manager    2      280656     643

  • Same info on 2 unlinked phones.

    My daughters new iPhone 5c some how has some of my info from my iPhone 6 plus. We have different iCloud accounts and different Apple id's. We use the same computer to sync and back up to. What can I do to fix this?  We both have the newest itunes and