Re: Can't fix my B2 error MSI GTX 970

Did you try re-inserting the CPU to ensure it was inserted just fine?
Did you double check the actual CPU socket and pins for damage?

It came with beta BIOS?
Quote from: ftwrthtx on Today at 01:57:45AMD FX 8320 is supported I have checked the list again, very carefully this time, and still could not find FX 8320 on it.
The FX-8320E is n...

Similar Messages

MOVED: Can't fix my B2 error MSI GTX 970

This topic has been moved to MSI Intel boards,
since the issue was the mainboard and not the video card
https://forum-en.msi.com/index.php?...

you can try it
also repeat the >>Clear CMOS Guide<< and make sure to remove the power cord from the PSU 1st,
else the procedure has no effect
also try switch and boot with t...

Some body (mod or tester) can show me picture board of MSI GTX 970 Tiger

I need a high res picture board of MSI GTX 970 tiger to know voltage controller they used is what, some body help me please ?

Quote from: hpipiw on 28-October-14, 13:30:42
Does this have what you need?
pic from http://www.ncixus.com/products/?sku=102246
thank you so much

How can I fix a time error on my MacBook?

How can I fix a time error on my MacBook?

If, after checking the settings in Sys Pref> Date/Time nothing really changes
you could see if a reset of the NVRAM could help.
Read carefully & when using the keyboard sequence, let the computer
start tone sound three times, to be sure the reset has really occurred.
•About NVRAM & PRAM:
http://support.apple.com/kb/HT1379
Does the time gain by itself? Is the Time Server set to automatically
keep the computer time corrected when you are online? You may
also try the manual settings, if the computer had not been used in
some time, because if the battery gets too low, the capacitor in a
portable computer can also lose power, & NVRAM - PRAM chip
settings could be lost. However by then, Date can also be wrong.
Was there anything else going on that may have affected this?
Sometimes odd items are related to something else.
Good luck & happy computing!

How can i fix a 4280 error code when trying to burn cd's on itunes

How can I fix a 4280 error code when trying to burn cd's on itunes for windows? Model drive is drive D: TSSTcorpCDRWDVD TS-H492C

Did you by chance find out a solution with your problem? I am having the same issue with the same drive. I even uninstalled iTunes and completely reinstalled it.
Thank you for any help anyone can offer. I'm not having any luck finding answers on the net. Thx.

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info

Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh

TS3694 how can i fix the itunes error 1638,3194 when i am restoring my ipad 2 wifi?

how can i fix the itunes error 1638.i changed my hosts file but i recive this error again.what can i do?

See Apple support Article
http://support.apple.com/kb/TS3694?viewlocale=en_US#error1638

How can I fix apple tv error "this content requires hdcp for playback"

how can I fix apple tv error "this content requires hdcp for playback" I've done everything suggested in troubleshooting and still my apple tv don't work. I'm thinking on returning it, since it doesn't work.

Welcome to the Apple Community.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another HDMI cable.
Make sure your TV supports HDCP
Try the Apple TV with another TV

How can I fix my communications error be my HP officejet j6480? The printer still works.

How can I fix my communications error between my Mac OS X and my HP Officejet J6480? My printer still works.

It is an HP Office jet 4635...%help

HT1414 How can I fix a 2001 error code

How can I fix a 2001 error code

This is USB related issue. See these steps for resolution.
http://support.apple.com/kb/TS3694#2000

B2 Error with new MSI GTX 970 :(

Hi there team!
Just registered to try and get help. I spent around 6 hours researching + trying all the suggestions throughout many different forums, but the B2 error still persists. I am currently running the following spec:
Mobo - MSI Z68A-G43 (G3), with version 4.30 ( I flashed bios last night and still no help)
CPU - Intel® Core™ i5-2500K Processor, 3.5GHz etc.etc.
RAM - Corsair Vengeance 2x4gb at 1333MHz
GPU - MSI GTX 970 GAMING Twin Frozr V 4GB GDDR5
PSU - Cooler Master Silent Pro 700W
I have tried:
-Taking out the card and using the on-board graphics to flash the bios to later version, No help. (during this process, the B2 error does NOT show up)
-Upgraded the card to latest nVidia drivers, even uninstalled and re-installed them. No help.
-Upgraded all the drivers from MSI, i.e. chipset etc. through Live Update 6. No help.
When the card is in, I cannot even access bios, it just gets stuck at B2 screen for like a minute, and then carries on with the boot process. I am able to play games etc. after the booting, but this error for sure should not be there when the PC boots up. I didn't have any issues with my old GTX 560 TI. I've read different forums saying that it might have something to do with the mobo thinking that something has to be connected to the on-board graphics; or that flashing BIOS helped a lot of users, but not me :(.
I don't have a second PC to test the card on.
Literally, I would try anything, please someone just help :(( This card is a beast and I wanna be able to properly use it and not having to worry about this error.
Thank you very much guys, hope someone can help!

Quote from: gabe_dimitrov on 08-February-15, 20:40:51
Man thank you so much! It is finally working!!! Thank you!!!! ))) It is showing correct version in BIOS, does not show B2 error whatsoever, all done! )
Thanks for your time! You can close thread, but it's very useful for anyone that has this issue!
Wich version of BIOS do you have installed? Can you OC your processor with new BIOS?

Can't OC my MSI GTX 970 GAMING

I had MSI GTX 970 GAMING which OC-ed very well (1540 Mhz boost) but had to return it because of loud coil whine. I bought second MSI card which is silent but can't OC it even by +50 Mhz in Afterburner because it drops gpu clock to default value in Valley benchmark after couple of minutes of testing. Do you know what is the reason of that?

Quote from: flobelix on 17-October-14, 15:48:18
Everything has been said above. As the reboot issue is no issue if using working clockrates there is still no problem.
You really don't see the issue with contributing to a thread about overclocking with the answer "Don't overclock and there isn't a problem"?
Flobelix, I'm not asking for a refund here.
I don't want a new card via RMA, and I'm not saying my card is bad in any way.
If it works at the shipped clocks just fine, then it's clearly fine. That's all that's promised anyway.
But I didn't come to a forum and post in this topic about overclocking to be shut down for talking about overclocking.
I'm looking for discussion.
I already said if someone felt my issue was sufficiently different than the OP I'd happily make a new thread.
If that's not the case, then I think I'm well within the bounds of exactly what this thread is about.

MSI GTX 970 - Slows down after a period, only PC reboot fixes

I'm having an issue with my new MSI GTX 970 4GB Gaming card.
Playing the Witcher 3 from a fresh boot up using optimised nvidia settings and I get 60fps easily. This remains the case for roughly 20-30 minutes. At which time, my frame rate will drop to ...

Aha, oki. I've noted flobelix to update his archive file to correct it.
QuoteGrabbed version 4.17 from TPU and that worked fine and dandy.
Yeah, i also link people to it directly, general ATI flash guide that i use:
flash guide:
QuoteDecom...

MSI GTX 970 Gaming 4G Issues & BIOS Update

bios.zip (136.34 kB - downloaded 37 times.)
Hello,
ever since I bought my GTX 970 I've had about 5 BSOD's while playing CS:GO and GTA:V. I am not sure whether it's a GPU issue or not, but I never had that issue before (at least with CS:GO).
Tech specs:
MB: z87-pro
CPU: i7-4770K
GPU: MSI GTX 970 Gaming 4G
OS: Win7 x64 SP1
latest OS updates
latest nVidia drivers
I've been wondering if there's a BIOS update for my GPU? I also tried just today to download MSI Live Update 6 but after executing the installer it displays "This application does not support this platform."
I've attached my GPU Bios.
Thanks in advance!

Quote from: Nichrome on 26-April-15, 03:21:48
Hi
With LiveUpdate, don't worry. Many users got issue with it, I believe MSI is aware of this already.
Is your motherboard running latest BIOS?
Is it known to work fine with other graphics card??
Do you have any OC on your CPU/RAM? (RAM OC=more than 1600MHz). Remove and try again.
What did the BSOD say? Error code?
Heya, thanks for the reply.
That's good to know for Live Update, just wanted to let you know. Before my GTX970 I was using an Asus GTS 450 (I know, lame) and used integrated graphics a couple of times but never had BSOD's during games with either of those. I didn't take a note of the BSOD error code, can I find a log somewhere on my system to upload it?
OC-wise everything is running on stock clock, BIOS is also latest version (2103, according to Asus).

Msi gtx 970 Fans Randomly Turning On When Idling???

So basically I have had my msi gtx 970 for a couple weeks and the fans seem to behave as normal? Now once when I was idling I noticed the fans spin up and immediately spin down straight away. So basically now every 30 seconds the fans will spin up and spin straight back down which is weird. The temps are fine and I have checked this using MSi Afterburner. The fans I'm pretty sure are meant to stay off under 65 which it is so why are the fans spinning up. I don't seem to notice it noise wise but I don't know what it is happening. When I check the Fan % in Msi After Burner it doesn't log the fan ramping up but the 'fan tachometer, RPM' section shows it going up and back down, I will link a picture of this. I will link you the youtube video which I highly reccomend watching for a better idea of what's happening. I show you it spin up once and back down then a waiting period and then it doing it again.
YouTube Video:
Msi afterburner, Fan tachometer section: http://i.imgur.com/gchIHhF.png

Quote from: rwcordell on 05-November-14, 04:05:25
I may have found a problem with MSI's fan settings on these cards.
Is this the problem? I don't know. But it does not seem to be set correctly IMO.
As you can see below the fans with the OEM bios are never actually set to 0 rpm. When they are off they are actually being told to spin at 1% power at 23 rpm.
I have changed mine.
The fans no longer randomly spin with the new drivers. And I have not had any more problems with one fan not spinning up ( although its too early to declare victory on that problem ).
My fans now start up at 50c and even when overclocked to 1503MHZ I have not gone over 65c at 68% fan speed.
Went ahead and copied your settings and everything seems to be working as it should now. Thanks
**EDIT**
Just tested it by getting gpu up to 50c and it seems to work. After it drops below 50 it takes a bit for the red fan to spin back down (stayed around 44% for a good 3-5 mins). After the red fan dropped to 0% the black fan slowly dropped down to 29% and that's where it is sitting right now. I think this is per design though since I remember my gpu doing this even on .16. The cooldown process or something I guess.
And at the end of this post black fan is back down to 0%. Good call on the problem looks like it's fixed .

Re: Can't fix my B2 error MSI GTX 970

Similar Messages

Maybe you are looking for