Re: Can't run P0056v200.exe (BIOS Update) on Tecra S5 with Vista Ultimate

When I run the bios update utility P0056v200.exe from within Windows I get the message "Toshiba BIOS Package Ver.3.2.8: This Computer is not supported."
I could not find any "traditional" update procedure for the Tecra S5.
Does anybody have any idea how I could update my bios?
TIA
nuwera

Hi,
the problem is that there are no drivers available for Windows Vista 64Bit. Usually you must have all tools and utilities installed like the "common modules" or "HW setup" because these tools enable you to perform such windows based updates like the "P0056v200.exe".
In your case there are not many options. You need a 32bit OS like WinXP or Windows Vista 32Bit which is supported from Toshiba by drivers and update your BIOS with a 32Bit based OS.
The error comes by the way when no common modules are installed.
Greets

Similar Messages

  • After installed osb, can't run config.exe to create a domain in windows7

    Hi,
    I am a newbie to weblogic and currently trying to learn it. I have installed weblogic 11.1.1.5.0, Oracle XE, and also create a schema. However, when I installed osb, I can't run config.exe(directory C:\oracle\Middleware\home_11gR1\wlserver_10.3\common\bin ) to create a domain. my computer is windows7, 64bit. I try to run config.exe as a administrator but no response. And there is another thing frustrating me, in the start menu, when I click the shortcut of config.exe or uninstall in the Oracle OSB 11g - Home1 folder, it just say I don't have access permissions.
    when I installed SOA, I alse met the same problem like OSB. btw, I have installed these software in other PC which run windows XP, and there is no problem happen!
    Here is the software I need to install
    weblogic 11.1.1.5.0
    Oracle XE
    soa 11.1.1.3.0
    osb 11.1.1.3.0
    So anyone can help?
    Thanks in advance.
    Daniel

    Hi,
    I am a newbie to weblogic and currently trying to learn it. I have installed weblogic 11.1.1.5.0, Oracle XE, and also create a schema. However, when I installed osb, I can't run config.exe(directory C:\oracle\Middleware\home_11gR1\wlserver_10.3\common\bin ) to create a domain. my computer is windows7, 64bit. I try to run config.exe as a administrator but no response. And there is another thing frustrating me, in the start menu, when I click the shortcut of config.exe or uninstall in the Oracle OSB 11g - Home1 folder, it just say I don't have access permissions.
    when I installed SOA, I alse met the same problem like OSB. btw, I have installed these software in other PC which run windows XP, and there is no problem happen!
    Here is the software I need to install
    weblogic 11.1.1.5.0
    Oracle XE
    soa 11.1.1.3.0
    osb 11.1.1.3.0
    So anyone can help?
    Thanks in advance.
    Daniel

  • How can I run ni488216.exe without any prompts during installation?

    How can I run ni488216.exe without any prompts during installation (Silent mode)?

    Typically you can do a silent install of the NI-488.2 software by running:
    setup.exe /S LV_INSTALL path=
    Regards,
    Greg Caesar
    National Instruments
    Applications Engineer

  • BIOS Update 6.70 problem with Satellite Pro C850-172

    I have two problems with updating the BIOS (the 1st is more important then the 2nd one):
    1. While trying to install BIOS Update 6.70-WIN (29/11/13) it says that:
    "The version of ROM file is the same as that of BIOS"
    and it stops. In the DOS window it shows one phrase:
    "NOT Windows 8 Platform, using Windows 7 update...".
    I use Windows 7 Home Premium 64bit system but recently there has been major automatic update done to it.
    I got lost. Is there anything I can do to update BIOS?
    2. Earlier it says that Flash process will be terminated and I need to "contact OEM BIOS engineer to add the NV storage location by HISII interface". But if I want to risk I can continue etc.
    Previously I took the risk and updating went well.
    But is there possibility to contact OEM BIOS engieneer?

    Hi
    >While trying to install BIOS Update 6.70-WIN (29/11/13) it says that:
    >"The version of ROM file is the same as that of BIOS"
    What is the present BIOS version which is available on your notebook?
    In case the BIOS is already up to date, the BIOS flash procedure will be interrupted.
    >"NOT Windows 8 Platform, using Windows 7 update...".
    Im not quite sure about the meaning of this information but it looks like the BIOS update was released for Windows 8 system and probably its required to upgrade the system from Windows 7 to Windows 8 in order to be able to flash the BIOS
    By the way: why you want to update the BIOS? Just because new version is available?
    Please note that BIOS update does not improve the notebook performance but fixes some issues. In case your notebook runs properly, the BIOS update is not very important

  • Re: BIOS update on Tecra with PGP WDE

    Hi,
    I want to update the BIOS of my Tecra S11. The harddrive is encrypted with PGP Whole Disk Encryption. Is it safe to run the Toshiba BIOS update program without first decrypting the disk?
    Thanks for your input,
    Patrick

    Hi
    Only the most naive person would say "yes it is safe".
    From years with computers, nothing is perfectly safe.
    However, if You're not using a TPM for encrypting your data I would say it is safe enough. Even if the TPM was involved, I would be very surprised if it was in any way affected by an BIOS update.
    At the same time if your data has any value - always back it up.
    So to sum it up - if your not using a TPM for encrypting services I would say there should be very little risks involved.
    But always always back up your valuable files. Regardless if your doing a BIOS update or not.
    BR
    Tom

  • I can't download the latest security update to my iMac with Yosemite 10.10.1

    I can't download the latest security update to my iMac with Yosemite 10.10.1

    Hi mesuno.  I can't download the update either.  When I click on "Update" I see the download progress bar for only a fraction of a second.  Then I get a message in the "updates installed" area saying that the update has been installed.  Then the Security Update notice returns and so does the "Update" button.  Then I press "Update" again and the same thing happens.  I can do this ad infinitum.
    The system seems to be confused.  I have several entries in the "installed" area saying that it has been installed, but still the "Update" button persists.  When I check with "Sytem information" there is no record of the installation.
    Is there something wrong with the App Store app, or does anyone else have a better idea?

  • I can't run activity monitor application. It just processes with the multicolored disc spinning, but does not open.

    I can't run activity monitor application. It just processes with the multicolored disc spinning, but does not open.  It also won't close without using "Force Quit." When I access it in Force Quit it's listed as not responding. I am getting the messase that my start-up disc is full, but I can't assess the status without using the activity monitor app. Thanks for any assistance you can give. -F.J.

    Welcome to Apple Support Communities
    If your hard drive is full, you have to delete files. Open Finder, search in all your user's folders and delete files that you don't need, or move them to an external drive.
    When the hard drive is full, OS X works slow and applications may freeze, so I wouldn't be surprised if this is the reason why Activity Monitor isn't working

  • I can't run itunes or install updates now due to teh MSVCR80.dll file not found and APS Daemon.exe being nable to locate a component ofn Windows vists.  A MS user suggested uninstalling all Apple programs.  I did this but could not uninstall the Apple Mob

    I have been getting error messages  .n MS windows the APS Daemon ,exe is unable to locate a component and the itunes updates and program failed to start because MSVCR80,dll was not found.  As advised I have uninstalled all Apple Inc. programs except the Apple Mobile Device program.  Then I reinstalled itunes but still get the errors and can't run itunes.  Advice....

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • How many times can I run PSConfig.exe -cmd upgrad .... command

    I'm getting VSS error in my eventlog -> application. I was getting 8213 and followed http://technet.microsoft.com/en-us/library/cc734219(v=ws.10).aspx and
    now I'm gettting 8230.
    Meanwhile my backups not are running. I remember running PSConfig command when I first installed windows and sharepoint 2010 on this box for system backup to work correctly.
    Now I run WMIC  QFE  LIST  FULL /Format:HTable > C:\Temp\HotfixList.html to retrieve all the installed update to check if KBs
    2460045 or 2687453 are installed unnoticed but I don't have any history of installed updates suprising eh!
    Now I want to run
    PSConfig.exe -cmd upgrade -inplace b2b -force -cmd applicationcontent
    -install -cmd installfeatures
    just incase one of them have been installed unnotice.
    How many times can I run this PSConfig command? How dangerous is this decision?

    You can run it as many times as you want, but it will take SharePoint down on that particular server (resets IIS, for example), while it executes.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • HP p6230a runs slow after bios update - Getting error BIODHD-8 on Diagnostic Tools

    After bios update my desktop runs so painfully slow it is unworkable.  Disk drive seems to be constantly hammered by processes that don't appear on task manager.  Running 64 bit windows 7 (sp1).  Running the diagnostic tools prior to boot up comes up with error code BIOHD-8 - A SMART test failed on the drive - please contact HP Support.  Ideally would like to get previous version of bios as machine was running well before update. 

    I will ask my HP Employee Expert colleagues about this internally. It will take a while for them to respond.
    the BIODHD-8 error code means your harddrive is failing and must be replaced.
    Back up everything that you possibly can before it fails and no longer boots up into Windows .
    is your notebook still within the standard warranty period of one year? A notebook hard disk is a warranty replaceable item.(no cost to you while within warranty) 
    HP notebook warranty status check website
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Satellite A110 (PSAB0) running hot after BIOS update

    I updated the BIOS on my Satellite A110 (PSAB0) to the latest version and now the laptop runs hot - the fan runs constantly and the battery drains from full to empty in minutes.
    Is there a setting or another update to cure this problem or how can I restore the old BIOS?
    I am sure I opted to save the old version during the update but I can't find it on my laptop.
    Thanks for any help

    Have you tried resetting the BIOS to its default settings?
    Also try updating the Toshiba Power Saver and Common Modules, and check that the power options are set to dynamic CPU speed to avoid the CPU from running full speed all the time.

  • Can I run a .exe file on a Mac?

    I need to know know if it's possible to run a '.exe' file on an Intel-based Mac running Mac OS X. There's a CD with an application I need to run. In the Finder it has the icon of the black computer screen with green letters and it's titled 'startCD.exe. It'll run on Windows but due to circumstances I need to run it on my computer. Any direction you can point me in will be greatly appreciated. Thank You!
    MacBook   Mac OS X (10.4.8)  

    Maybe:
    http://www.codeweavers.com/
    "CrossOver Mac allows you to install many popular Windows applications and games on your Intel OS X Mac. CrossOver includes an easy to use, single click interface, which makes installing Windows software simple and fast. Once installed, your application integrates seamlessly in OS X. Just click and run your application directly from the OS X Finder. Clicking a Windows file or document — including email attachments — will launch the appropriate Windows program, allowing you to work on the files. Best of all, you do it all easily and affordably, without needing a Microsoft operating system license.
    Adding new Windows software is easy. Just place your install CD in your Intel Mac, and CrossOver will recognize it and offer to begin the installation process. CrossOver then completes the installation and configures your application to run on your Mac. That's all there is to it."

  • Can not boot up after BIOS update

    system BIOS update and restart the computer
    black screen and nothing displayed

    Some information provided: ThinkPad X200 Windows Vista Home Premium

  • BIOS Update on Tecra M10 - Install2 is not working

    Hi,
    I have a Tecra M10-13L with Vista Business SP2 32bit installed.
    I tried to update my BIOS from v1.6 to the currently available v3.0 by downloading "bios-20091104152403.zip" from the support-page and unpacked "P0065v300.exe", dated 4.11.2009. When I run the programm, I always get the windows-message "install2 is not working" and the process is aborted.
    In the folder C:\TOSHBIOS.UPD i found a install2.exe, dated 12.08.09 which seems is unpacked from the bios-update-file.
    Any ideas how the update can be done?
    I already loaded the BIOS-update file from diferent servers and tried several times, but its always the same problem.

    Hi
    Why you want to update the BIOS?
    Is there something wrong with the notebook?
    BIOS should be updated only if you would have some problems. If notebook is running well, then I would not update this
    However, I found three BIOS v3.0 for Tecra M10
    - bios-20091104172541.zip
    - bios-20091104152403.zip
    - bios-20091103164158.zip
    Try if one of the BIOS packages could be unzipped correctly and exe file could be executed.

  • Update BIOS Failed on Tecra R10 with Windows7

    Hello,
    I have problems with updating the BIOS of my Tecra R10J. The current version is 1.4, and I want to update it to 3.0, so i have downloaded from Toshiba web site the correct file named "P006Cv300.exe" released from 11/04/2009. This is a BIOS update ONLINE into a real session of Windows 7. Simply, right click the compress exe, click run as admin and that's all but ......... for me it said :
    *"[Error] The starting of service was aborted. User does not have administrator privileges"*
    see below :
    http://perso.orange.fr/100mo/bioserror.jpg
    I've tried it with :
    - closed AV, Firewall, etc ...
    - disable UAC
    - Run as administrator
    - Tried with an another admin account
    - Safe mode (bios update does not support safe mode)
    - direct local administrator session
    No change. Still the message "User does not have administrator privileges".
    Need help please, found nothing on Google (similar Bios problem but not solved !!!!!)
    Thank you

    Hi and thanks for your reply.
    Yes my Tecra was delivered with Vista and not 7 but the bios update i've downloaded is "os independant". I can't believe that i must reinstall Vista for successful upgrading BIOS !! It's a joke ?
    When i download the bios update on Toshiba website i choose "Tecra R10" and "Windows 7 64 bits" and then donwloaded the corresponding file.
    Now I 've installed VAP, reboot notebook and now i have always the same error *but i found these errors in the eventviewer immediately after executing bios update* :
    +\SystemRoot\SysWow64\Drivers\Aspi32.SYS has been blocked from loading due to incompatibility with this system. Please contact your software vendor for a compatible version of the driver.+
    and
    +The Aspi32 service failed to start due to the following error: This driver has been blocked from loading+
    and
    +The NCHGBIOS2SVC service failed to start due to the following error: The system cannot find the file specified.+
    Any idea ?
    Thank you ;)

Maybe you are looking for

  • 10g: parallel pipelined table func. using table(cast(SQL collect.))?

    Hi, i try to distribute SQL data objects - stored in a SQL data type TABLE OF <object-Type> - to multiple (parallel) instances of a table function, by passing a CURSOR(...) to the table function, which selects from the SQL TABLE OF storage via "selec

  • External display - how to disable internal display or to move dock

    Hi, I'm using my MacBookPro with my external monitor. Since my external 24" Monitor is big enough, I don't want to use my integrate monitor. At least I'd like to move the dock as well as the top bar to the external monitor, because my MacBookPro is n

  • WHERE DID THE PICTURES GO???

    My iphoto 5 is not showing me my pictures! I spoke to an apple representative and he directed me here. I really hope someone can help me! Apparently my pictures have become corrupt or unreadable. Is there a way for me to be able to find them again on

  • Anyone else experiencing changes in iTunes being undone?

    Since downloaded Mavericks new playlists are moving, info (changes to title, artist, album, date, genre) reverting. Using Mavericks and iTunes 11 1.2 (31).

  • SolMan and CMMI Configuration Management

    Hi We are looking into implementing CMMI level 3 in our organisation. One of the main points is to use SolMan for Configuration Management which seems obvious. Does any of you "out there" have any experiences and answers/ideas to the following topics