Re: Device Registration Issue

Hi I have problems with silverlight not working, I am not on private browsing, I have just reinstalled the latest version of silverlightand also checked that my apple mac is registered which is confirmed, not sure what to do next?

What error message are you seeing or what is happening, the more information you can post the better.

Similar Messages

Retail Execution Application Device Registration Issues

Hello Community,
I am having issues registering the Retail Execution application with a user in CRM.
I am testing with an iOS device where I downloaded the application from the app store and an Android device where I got the APK from the SAP marketplace.
The guide I am following is the Administrator's Guide SAP Retail Execution 3.2.0.
There are a few issues i've come across which I think might be contributing to my devices not enrolling.
I've completed the setup of the environment till the point in the documentation for Data Change Notification where I need to create an RFC connection to the SMP server.
I entered the IP address for the SUP server with the port as 80. Is port 80 correct?
The username ive setup as supAdmin@Admin with the password.
When I test the connection I get a : Status HTTP Response 404 error.
Another issue I have is that in the documentation under the section enrolling a device using the Relay Server, all the fields are referring to SMP username, SMP Farm ID, SMP Activation code and so on. The connection details I have used in other apps are as follows:
Server : <ip of relay server>
Farm : Relay server Farm ID
Username : jcommerford@crm (CRM login ID @ security configuration - crm is my HTTPAuthentication security configuration I created in SUP)
password :
Port : 80 (relay server port)
URL suffix : leave blank
Domain : The new domain I created in SUP and where the Rex MBO is deployed.
So it isnt making sense as to what details need to go into here.
Lastly...
What is the absolute minimum setup of the CRM system and SUP to register a user through the relay server?
I would like to comment that I havnt performed the initial download of Master Data using DCN but didnt think this was needed to enrol a device. Other than that the guide was followed and configuration done according to it.
Let me know if anymore information is needed as I am very stressed to get this issue sorted out.
Thank you
Jared

Hello Jared
Has the registration worked without the Relay server setup? I would suggest you try that first.
I am assuming you already set the SM59 destinations for CRM to SMP and trusted RFC to corresponding ECC (but this is not necessarily the issue, because the registration is failing).
Please confirm that the RFC Destination is set as follows (use the supAdmin user on the Logon & Security page)
Check the security provider on SMP (your's may be different but I am using the following for POC and it works)
Could you please confirm if the REX package was deployed correctly on the SMP server by selecting the connection pools for both CRM and ECC for corresponding MBO's
Please post a log of the SMP server once you switch to direct registration to SMP (without relay server)
Thanks
Raza.

Zenworks 7 Linux Management Device Registration Issue

All,
Below is a detailed description of a resistration issue using Zenworks
Linux Management 7.
Hardware Configuration:
1- DSL Modem (Westell Model 2200)
1- DI 614+ 2.4 GHz Broadband Wireless Router (includes 4-5 ethernet
ports) with a IP address of 192.168.0.1
1- PC Server running Redhat SUSE Linux Enterprise Server 9 (has a static
IP address of 192.168.0.103). This machine is running the Zenworks 7
Linux Management Software and is able to sucessfully launch the Zenworks
7 Control Panel.
1- Redhat Linux Enterprise Server 3 on a completely different network
with a static IP address (207.44.142.56). This machine is running the
Zenworks Linux Management Agent install using the ./zlm-install -a
command.
Network Configuration:
The broadband DSL modem is connected directly to the WAN ethernet port on
the wireless router
The primary PC server running Redhat SUSE Linux Enterprise Server 9 has a
direct connection to one of the ethernet ports on the wireless broadboard
router with a private static IP address of 192.168.0.103 and has a public
IP of 70.22.107.168.
The DSL modem is has a direct connection to the telephone line.
The Redhat Linux Enterprise Server 3 is on a completely different network
with a IP of 207.44.142.56.
No firewalls are configured on the primary server and the wireless router
Port Forwarders are configured on the broadband wireless router as
follows:
zlm1
192.168.0.103
TCP 80/80
always
zlm2
192.168.0.103
TCP 443/443
always
zlm3
192.168.0.103
TCP 524/524
always
zlm4
192.168.0.103
TCP 1299/1299
always
zlm5
192.168.0.103
TCP 2544/2544
always
zlm6
192.168.0.103
TCP 5506/5506
always
zlm7
192.168.0.103
TCP 10389/10389
always
zlm8
192.168.0.103
TCP 10636/10636
always
Goal:
To successfully register the Redhat Linux Enterprise 3 server (i.e. the
managed device with IP 207.44.142.56) with the primary server
(192.168.0.103 SUSE Redhat Enterprise Server 9 machine) so it can be
viewed and managed from the Zenworks 7 Control panel.
Nature of Problem:
When attempting to register the managed device (207.44.142.56) with the
primary server (192.168.0.103) which resides inside of my Wireless Local
Area Network (WLAN) via the following command, it appears to fail. I'm
unable to view or configure this managed device inside of the Zenworks 7
Linux Management Control Panel. The following are 2 manual approaches
that I take to register the managed device and the results for each.
Register using private IP approach:
/opt/novell/zenworks/bin/rug sa https://192.168.0.103
Results: ERROR: Could not add 'https://192.168.0.103': Download failed:
(https://192.168.0.103/zenworks-registration/service.xml) Error:
ConnectFailure
Register using public IP approach:
/opt/novell/zenworks/bin/rug sa https://70.22.107.168
Results: ERROR: Could not add 'https://70.22.107.168': Download failed:
(https://70.22.107.168/zenworks-registration/service.xml) Error:
ConnectFailure
Regards,
Darrick Addison
Sr. Software Engineer/Consultant
ASC Technologies, LLC
Ph: 443.257.9116
Fax: 410.360.5570
E-mail: [email protected]
Web: www.asctllc.com

On Tue, 08 Nov 2005 02:37:16 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Zenworks Linux Management Device Registration Issue

All,
Below is a detailed description of a resistration issue using Zenworks
Linux Management 7.
Hardware Configuration:
1- DSL Modem (Westell Model 2200)
1- DI 614+ 2.4 GHz Broadband Wireless Router (includes 4-5 ethernet
ports) with a IP address of 192.168.0.1
1- PC Server running Redhat SUSE Linux Enterprise Server 9 (has a static
IP address of 192.168.0.103). This machine is running the Zenworks 7
Linux Management Software and is able to sucessfully launch the Zenworks
7 Control Panel.
1- Redhat Linux Enterprise Server 3 on a completely different network
with a static IP address (207.44.142.56). This machine is running the
Zenworks Linux Management Agent install using the ./zlm-install -a
command.
Network Configuration:
The broadband DSL modem is connected directly to the WAN ethernet port on
the wireless router
The primary PC server running Redhat SUSE Linux Enterprise Server 9 has a
direct connection to one of the ethernet ports on the wireless broadboard
router with a private static IP address of 192.168.0.103 and has a public
IP of 70.22.107.168.
The DSL modem is has a direct connection to the telephone line.
The Redhat Linux Enterprise Server 3 is on a completely different network
with a IP of 207.44.142.56.
No firewalls are configured on the primary server and the wireless router
Port Forwarders are configured on the broadband wireless router as
follows:
zlm1
192.168.0.103
TCP 80/80
always
zlm2
192.168.0.103
TCP 443/443
always
zlm3
192.168.0.103
TCP 524/524
always
zlm4
192.168.0.103
TCP 1299/1299
always
zlm5
192.168.0.103
TCP 2544/2544
always
zlm6
192.168.0.103
TCP 5506/5506
always
zlm7
192.168.0.103
TCP 10389/10389
always
zlm8
192.168.0.103
TCP 10636/10636
always
Goal:
To successfully register the Redhat Linux Enterprise 3 server (i.e. the
managed device with IP 207.44.142.56) with the primary server
(192.168.0.103 SUSE Redhat Enterprise Server 9 machine) so it can be
viewed and managed from the Zenworks 7 Control panel.
Nature of Problem:
When attempting to register the managed device (207.44.142.56) with the
primary server (192.168.0.103) which resides inside of my Wireless Local
Area Network (WLAN) via the following command, it appears to fail. I'm
unable to view or configure this managed device inside of the Zenworks 7
Linux Management Control Panel. The following are 2 manual approaches
that I take to register the managed device and the results for each.
Register using private IP approach:
/opt/novell/zenworks/bin/rug sa https://192.168.0.103
Results: ERROR: Could not add 'https://192.168.0.103': Download failed:
(https://192.168.0.103/zenworks-registration/service.xml) Error:
ConnectFailure
Register using public IP approach:
/opt/novell/zenworks/bin/rug sa https://70.22.107.168
Results: ERROR: Could not add 'https://70.22.107.168': Download failed:
(https://70.22.107.168/zenworks-registration/service.xml) Error:
ConnectFailure
Regards,
Darrick Addison
Sr. Software Engineer/Consultant
ASC Technologies, LLC
Ph: 443.257.9116
Fax: 410.360.5570
E-mail: [email protected]
Web: www.asctllc.com

On Tue, 08 Nov 2005 02:40:58 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Re: Zenworks 7 Linux Management Device Registration Issue

On Tue, 08 Nov 2005 02:35:13 GMT, [email protected] wrote:
> All,
>
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

On Tue, 08 Nov 2005 02:39:10 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

ISE 1.2 Device registration problem

I'm trying to get the device registration to work, but keep getting "Device not supported" or "Unable to obtain the user information".
I cannot seem to find any information on those errors from the manuals.
What are the possible solutions to get it working ? If the device is not supported, does it mean, that the profiling failed or something else ?
ISE 1.2

Hi Harri,
What kind of authentication are you doing for these users? MAB, Dot1x? Also is this issue seen with all devices, or just a few ( i.e. same type, same vendor...)?
If this is self-registration for guest users, there is a known issue with using Custom Guest Portal. The defect details are given below :
https://tools.cisco.com/bugsearch/bug/CSCui77336/?reffering_site=dumpcr
Therefore if you are using the custom portal, can you instead try with a default portal?
Thanks,
Aastha

Automatic device registration

I am using ISE 1.2. I have to configure automatic device registration through Guest Portal.
The issue is that whenever a guest logs in for first time, he needs to enter the device mac address manually. Is there any method so the ise will automatically notice device's mac address and automatically populate it in "Device ID" field on Device Registration Portal
Regards,
Aditya

AD FS Device Registration CNAME records

I researched all over but couldn't find an answer, I am hoping someone can help me or lead me to a solution/answer. I have two (2) AD FS farm in the same Active Directory domain. I will call them sts.contoso.com and sts-test.contoso.com. I need to setup/enable
device registration on both. First the sts-test and then the sts. Everywhere I have read it says to use EnterpriseRegistration.contoso.com for DNS/CNAME. Can I use any another name other than EnterpriseRegistration? The issue I am facing is that both my AD
FS uses same internal DNS at contoso.com. so if I create a CNAME EnterpriseRegistration.contoso.com and link to sts-test.contoso.com, then I will not be able to create another CNAME EnterpriseRegistration.contoso.com and link to sts.contoso.com.
can I modify this DNS suffix to say EnterpriseRegistration1.contoso.com and EnterpriseRegistration2.contoso.com? Will this work?
Thanks
Isaac Oben MCITP:EA, MCSE,MCC <a href="https://www.mcpvirtualbusinesscard.com/VBCServer/4a046848-4b33-4a28-b254-e5b01e29693e/interactivecard"> View my MCP Certifications</a>

Hi Isaac.. no I don't believe that's possible.. I'd suggest using another (subordinate) zone, e.g. test.contoso.com and then placing the appropriate records beneath, or using a different domain. There's nothing that binds the chosen AD FS domain name to
the AD domain per se, so it could even be foo.com, assuming the appropriate zone is registered for internal and external (internet) use.
http://blog.auth360.net

Device registration rules backup

Hi,
I've spent a lot of time putting in device registration rules for different subnets. I'm already backing up the database and also the closest server rules / certificate authority using zman on the (linux) servers.
What I'm not clear on is where the registration rules are held, can anybody advise please?
Thanks in advance,
David

dwhite42,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

How do I skip the Device Registration Portal for Cisco ISE web portal

I have set up a sponsor and guest portal system for wireless guest access to the internet using ISE v1.2.0.899 virtual and WLC 5500 runninng 7.4. After logging into the intial page, the guest user is directed to the Device Registration Portal. Entering a MAC address value puts the user in a continuous failing loop. But, if they just hit the "continue" button at the bottom of the page, they will be directed onward and have internet access as was intended. I have no requirement for guest users to register their devices. What do I need to do to remove the device registration portal from the log on sequence for guest user access? Thanks!

Hello Scoot,
you make a list of the MAC add of coperate devices. and set a rule if authentication doesn't happen only these devices can do the self registration.
I hope this works for you

Jabber for Windows Registration Issue

I have been facing issue with J4W registration and display error "no connection to server". Following is the version detail:-
Version CUCM and IM&P---> (10.5.2)
On-Premises login
During analysis, i found 2 things in logs:-
1). Unable to download jabber-config.xml file (Download of TFTP File failed for server ) //// all the other xml files are succesfully downloaded which may indicate that there is an absence of jabber-config.xml file.
2). While signing into presence "OnLoginError: (data=0) LERR_JABBER_UNREACHABLE <16>: "
[rc\cert\common\BaseCertVerifier.cpp(250)] [csf.cert.] [cert::BaseCertVerifier::checkIdentity] - About to verify the Subject Alt Name.
[ls\src\cert\common\CertVerifier.cpp(154)] [csf.cert] [cert::CertVerifier::checkIdentifier] - Verifying identity '162.20.10.30'
[rc\cert\utils\AltNameParserImpl.cpp(349)] [csf.cert.utils] [cert::AltNameParserImpl::verify] - Looking for match with 162.20.10.30
[rc\cert\utils\AltNameParserImpl.cpp(400)] [csf.cert.utils] [cert::AltNameParserImpl::verify] - No Match Found
I tried to change the IP address to FQDN under System---> Server, but after that the connection is lost between CUCM and IM&P.
Attached is the log file and snapshot of IM&P.
- See more at: https://supportforums.cisco.com/discussion/12490406/jabber-windows-registration-issue#sthash.E2wXb4iJ.dpuf

Nishant,
Sorry for the late reply. You may well have resolved this by now, if you have can I suggest that you update the post with the resolution so others may benefit.
Looking at the logs, I can see that Jabber is trying to login to the IMP server below, but its returning server unreachable error.
Signing into Presence Server. Server: 162.20.10.30, login mode: ON_PREM, result: 0
[IMPStackCap::Login::OnLoginError] - ****************************************************************
[IMPStackCap::Login::OnLoginError] - OnLoginError: (data=0) LERR_JABBER_UNREACHABLE <16>:
[IMPStackCap::Login::OnLoginError] - ****************************************************************
We will need to look at the IMP logs to know what is going on. Let me know if you still need help with this.

My iPhone 5S has not connected to 4G LTE service in the last few days? Is there an outage/issue with 4G in my area (Pittsburgh) or is this a device specific issue?

My iPhone 5S has not connected to 4G LTE service in the last few days? Is there an outage/issue with 4G in my area (Pittsburgh) or is this a device specific issue?

JHblues Let's get your data working again. There are not any reported issues in the area. Try this step: http://vz.to/1kUSSk2
Sheritah_vzw
Follow us on Twitter
@VZWSupport

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

The Ultimate Guide to Resolving Profile and Device Manager Issues

The following article also applies to issues after re-setting the severs' hostname. It also applies to situations where re-setting the Code Signing Certifictateas described by Apple has not resolved the issue.
Hello,
I have been plagued with Profile Manager and Device Manager issues since day one.
I would like to share my experience and to suggest a way how to resolve issues such as device cannot be enrolled or Code Signing Certificate not accepted.
I shall try to be as brief as possible, just giving an overview of the steps that resolved my issues. The individual steps have been described elsewhere in this forum. For users who have purchased commercial SSL certs the following may not apply.
In my view many of these issues are caused by missing or faulty certificates. So let us first touch on the very complex matter of certificates.
Certificates come in many flavours such as CA (Certificate Authority), Code Signing Certificate, S/MIME and Server Identification.
(Mountain?) Lion Server creates a so-called Intermediate CA certificate (IntermediateCA_hostname_1") and Server Identification Certificate ("hostname") when it installs first. This is critical for the operation of many server functionalities, including Open Direcory. These certs together with the private/public keys can be found in your Keychain. Profile and Device Manager may need a Code Signing Certificate.
The most straightforward way to resolve the Profile Manaher issues is in my view to reset the server created certicates.
The bad news is that this procedure involves quite a few steps and at least 2 hours of your precious time because it means creating a fresh Direcory Master.
I hope that I have not forgotten to mention an important step. Readers' comments and addenda are welcome.
I shall outline a sensible strategy:
1. Clone your dysfunctional server to an external harddrive (SuperDuper does a reliable job)
2. Start the server fom the clone and shut down ALL services.
3. It may be sensible to set up a root user access.
4. Back-up all user data such as addess book, calendar and other data that you *may* need to set up your server.
5. Open Workgroup Manager and export all user and workgroup accounts to the drive that you using to re-build your server (it may cause problems if you back-up to an external drive).
6. Just in case you may also want to back-up the Profile Manager database and erase user profiles:
In Terminal (this applies to Lion Server - paths may be diferent in Mountain Lion !)
Backup: sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
Erase database:
sudo /usr/share/devicemgr/backend/wipeDB.sh
7. Note your Directory (diradmin) password for later if you want to re-use it.
8. Open Open Server Admin and demote OD Master to Standalone Directory.
9. In Terminal delete the old Certificate Authority
sudo rm -R /var/root/Library/Application\ Support/Certificate\ Authority/
This step is crucial because else re-building you OD Master will fail.
9. Go back to Server Admin and promote the Standalone Directory to OD Master. You may want to use the same hostname.
10. When the OD Master is ready click on Overview and check that the LDAP and Keberos Realm reflect your server's hostname.
11. Go back to Workgroup Manager and re-import users and groups.
NOTE: passwords are not being exported. I do not know how to salvage user passwords. (Maybe passwords can be recovered by re-mporting an OD archive - comments welcome! ).
12. Go to Server App and reset passwords and (not to forget) user homefolder locations, in particular if you want to login from a network account!
If the home directory has not been defined you cannot login from a network account.
13. You may now want to restore Profile Manager user profiles in Terminal. Issue the following commands:
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
14. You can now switch back on your services, including Profile Manager.
In Profile Manager you may have to configure Device Management. This creates a correct Code Signng Certicate.
15. Check the certificate settings in Server App -> Hadware -> Settings-> SSL Certificates.
16. Check that Apple Push Notifications are set.(you easily check if they are working later)
17. You may want to re-boot OS Server from the clone now.
18. After re-boot open Server App and check that your server is running well.
19. Delete all profiles in System Preferences -> Profiles.
19. Login to Profile Manager. You should have all users and profiles back. In my experience devices have to be re-enrolled before profiles can be pushed and/or devices be enrolled. You may just as well delete the displayed devices now.
20. Grab one of your (portable) Macs that you want to enrol and go to (yourhostname)/mydevices and install the server's trust profile. The profile's name should read "Trust Profile for...) and underneath in green font "Verified".
21. Re-enrol that device. At this stage keep your finger's crossed and take a deep breath.
22. If the device has been successfully enrolled you may at last want to test if pushing profiles really works. Login to Profile Manager as admin, select the newly enrolled device. Check that Automatic Push is enabled (-> Profile -> General). Create a harmless management profile such as defining the dock's position on the target machine. (Do not forget to click SAVE at the end - this is easily missed here). If all is well Profile Manager will display an active task (sending) and the dock's position on the target will have changed in a few seconds if you are on a LAN (Note: If sending seems to take forever: check on the server machine and/or on your router that the proper ports are open and that incoming data is not intercepted by Little Snitch or similar software).
Note: if you intend to enrol an Apple iPhone you may first need to install the proper Apple Configuration software.
Now enjoy Profile and Device Manager !
Regards,
Twistan

HI
1. In Action profiles, logon to system and recheck correcion are available in action definition as well in condition configuration and the schedule condition is also maintained. but the display is not coming(i.e in the worklist this action is not getting displayed).
You can check the schedule condition for the action and match the status values...or try recreating the action with schedule condition again....for customer specific ....copy the standard aciton with ur zname and make a schedule condition and check the same.
2, In suppport team of incident when i give individual processor it throwing a warning that u r not the processor. but when i give org unit it is working perfectly. Could anyone guide on this.
You need to have the empolyee role for BP ..goto BP and got here dropdown for ur bp and choose role Employee and then enter ur userid
also make sure that u have the message processing role
Hope it clarifies ur doubt and resolve ur prob
Regards
Prakhar

Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.

Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows Publisher

Hi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.

Re: Device Registration Issue

Similar Messages

Maybe you are looking for