Re: Fiori Launchpad HTTP

Hi,
I implement Fiori demo scenarios and use http. But in the launchpad I see an error:
Are there any opportunities to disable this warning on the launchpad?
Best regards,
Olga

By default all the ABAP applications try connecting via HTTPS protocol and would be just a warning since HTTPS is not configured properly. (you can still proceed though )
This  might help you.to fix it.
-virinchy

Similar Messages

  • Fiori Wave 2 Launchpad HTTP 511 Network Authentication Required

    Dear expert,
    When I try to call the Fiori launchpad, it returns the code of HTTP 511 Network Authentication Required. BEFORE the login screen shows.
    Also error: GET /sap/bc/ui5_ui5/ui2/ushell/shells/abap 401 Unthorized.
    However if I maintain the ushell service in SICF on LOGON DATA tab with a specific user A103296.
    The homepage(with error "unable to load groups") comes out directly without the login screen.
    For "unable to load groups", it says  401 Unauthorized for PAGE_BUILDER_PERS.
    However I have both the authorization SAP_UI2_ADMIN_700 and SAP_UI2_USER_700 for A103296.
    I suppose there's no need to maintain the logon data for SICF service,right?
    On the other hand, Launchpad Admin screen runs smoothly without any issue.
    Could you please help on this?  Masayuki Sekihara
    Thank you very much indeed!
    Thanks,
    Chloe

    Hi Masa,
    The issue is solved.
    Because the customer's /bc/ui5_ui5/ui2 service logon ABAP class was changed from /UI2/CL_SRA_LOGIN to /IWFND/CL_COC_SYSTEM_LOGIN.
    Change the class back to /UI2/CL_SRA_LOGIN  and is able to log on to the launchpad now.
    But cannot figure why this error message shows about "authentication".
    Thanks,
    Chloe

  • Fiori Launchpad Error: Failure - Unable to load groups Resolved!!!!

    Hey Good Fellas,
    This is a solution rather than a discussion, which i thought to do to with a kind generosity of spirit to give back to the community.
    It gives me immense pleasure and happiness to write this particular post, because it is through SCN only i have been able to find the solution.
    Ok, let's get down to the Business quickly, shall we?
    I have been configuring Fiori App - Approve Purchase Orders. All the tasks for this have been done from SAP Help Site.
    Recently I upgraded the ERP/Gateway (Its an embedded deployment) to EHP 7 and UI to SP09, post which the Fiori Launchpad started giving the below error.
    If you look around the SCN, you will probably hit across these threads and so did I.
    http://scn.sap.com/thread/3571448
    SAP Fiori - UI Add-on SP09 update troubleshooting
    With the first thread, I tried everyone's solution and suggestions which had worked for others, but it didn't for me.
    With second thread (Excellently posted by Masayuki Sekihara), it started off with lots of efforts and double-checks applying all of these notes hoping that it would resolve the issue. But I had done all the steps 1-8 and still didn't get the solution.
    Besides the above two mentions I did umpteen number of other ridiculous things like implementing this note, that note, De-implementing another of the notes and everything i found as possible solutions on the Web.
    Now, the breakthrough here is checking the errors in /IWFND/ERROR_LOG. Well, on the browser it used to give error 'Failure - Unable to Load Groups' while at the server side, actual error was something unusual and remotely not related to what the error looked like in the browser. In the back-end, I was getting the error "Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist". And this is something i know how to correct.
    So just keep looking for the errors in /IWFND/ERROR_LOG and shift your focus there. That's really a good place to trouble-shoot.
    And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
    I am able to get inside the Fiori Launchpad now (I was quite at edge to really give up as all the possible solutions had been ruled out for me ) and do see the tiles of the apps configured.
    I hope this is going to be a good take-away for others who are having Odata handling issues.
    The floor is all yours now for your kind feedback. Be gentle with me, I am a very shy blogger.
    Best Regards,
    Akshay

    Steve,
    If you still have the error, this is what I did to resolve mines.
    1) Goto SPRO - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model
    2) Find out the entry for 'ZINTEROP_MODEL_0001_BE'
    3) Copy that entire row in a notepad for all the fields
    4) Create new Entry with all the fields, except change the Software Version to DEFAULT (As that's what missing for you'
    5) Save and give that another try.
    This is what I exactly wrote in my solution as well.
    Akshay wrote:
    And for the record to take care of the error 'Data Provider implementation 'ZINTEROP_MODEL_0001_BE' '01' 'DEFAULT' does not exist' you have to assign the DPC (Data Provider Class) to DMC (Data Modelling Class) correctly by navigating to IMG - SAP Netweaver - Gateway - Former Development - Local OData Channel Development - Registration - Assign Data Provider to Data Model. There you define the Data provider with the correct Software Version and Voila you are all set! You don't have to worry about the duplicate entry with another Software version, your correct software version is the one you have defined in the System Alias which you are using inside the service, which is generally DEFAULT.
    A screen-shot perhaps helps you more.
    Let the other duplicate entry with Software Version other than Default be there. Important is that the software version that you have defined in your alias must be the one over here.
    Let me know how that goes?
    -Akshay

  • Error while creating Catalog in Fiori Launchpad Designer

    Hi Experts,
    We have installed the new UIX* Fiori components on our NW 7.31 front-end server which has the gateway installed as well. Our backend ERP system is a separate system.
    I have activated the OData services /UI2/INTEROP and /UI2/TRANSPORT for the Fiori Launchpad Designer. I am acessing the Launchpad Designer with the URL http://<host>:<port>/sap/bc/ui5_ui5/sap/arsrvc_upb_admn/main.html. (I have activated the ICF service /sap/bc/ui5_ui5/sap/arsrvc_upb_admn).
    Now when I try to create a new Catalog (Standard type) by providing Title and ID I am seeing the below error message for POST operation in the PAGE_BUILDER_CUST service in Google Chrome browser:
    Our system components are as below:
    Can someone let me know how I can resolve this error so that I can create Catalogs in the Launchpad Designer?
    Regards,
    Saurabh
    Tags edited by: Michael Appleby

    Hi Saurabh,
    Please take a look troubleshooting steps.
    SAP Fiori LL17 - SAP Fiori launchpad troubleshooting
    Regards, Masa
    SAP Customer Experience Group - CEG

  • Site's security certificate is not trusted - in fiori launchpad url

    Hi ,
    we are using HTTPS protocol in fiori launchpad , when the URL is opened in browser an error or warning comes up , it can be ignored by clicking
    proceeding anyway button. in Fiori client for mobile ( android or iOS ) its not showing the page due to this problem.
    our URL is a intranet URL ( within companies network ) how can we solve this problem , do we need to purchase any security certificate from some
    authority or some configuration is required ?
    Regards
    Yashpal
    Message was edited by: Michael Appleby

    The following may also be helpful .  Getting Started with Kapsel - Appendix D -- Security
    I hope to update this document and the associated Getting Started with Kapsel - Part 8 -- AuthProxy
    sections in the next week or two to demonstrate how to use OpenSSL to create a Certificate Authority and use the Certificate Authority to sign certificates.
    Regards,
    Dan van Leeuwen

  • Calling ABAP Webdynpro app in FIORI launchpad

    Hi All,
    Could anyone help me with launching an existing ABAP webdynpro application in FIORI Launchpad.
    We just moved to HANA Enterprise Cloud and would like to know how we could launch an existing ABAP Webdynpro application using FIORI Launchpad.
    Any help/documentation would be greatly appreciated.
    Thanks,
    Shiv

    Hi,
    Please follow instruction defined here - http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40611a2f-ba23-3210-60b5-d26402db0f2e?QuickLink=index&…

  • Fiori Launchpad Menu Control (most recent version)?

    Hi All,
    Hopefully a really easy question for anyone with the Fiori launchpad sitting in front of them - but I briefly noted how the menu works on the launchpad and want to now implement this in my own app for a menu. Is this a dedicated control, a dialogue box linked to a button or some variation of SplitApp to achieve this? (it was a really quick demo I saw of it, so didn't get enough time to screen capture it).
    BTW - I'm not referring to the old menu as seen in this video but the menu in the latest release:
    http://www.youtube.com/watch?v=mYbn9Q6P0cU
    But the new one which acts like a responsive design Split App menu that hovers over the top (left of centre when selected).
    Thanks,
    Matt

    I did find a runnable equivalent just now, and did some digging/debugging. I'd been curious myself and this was a perfect excuse :-)
    Looks like the left-hand menu layout is achieved with this hierarchy:
    sap.ui.unified.Shell
      |
      +-- sap.ui.unified.SplitContainer
             |
            +-- sap.m.Page*
                   |
                   +-- various 'normal' sap.m controls(List, InputListItem, etc)
    *this contains the menu as the 'secondaryContent' aggregation
    hth!

  • Fiori Launchpad displays a blank screen

    My Fiori Launchpad displays a blank screen when running the FioriLaunchpad URL
    https://******/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html
    I installed Fiori and everything appears to be configured ok.  I then installed the backend components for Leave Requests (GBHCM002 and GBHCM003).  I created a new catalog and group in the launchpad designer and assigned them to my role.
    I activated the ICF services, and launchpad services via /iwfnd/maint_service.  Services are assigned to LOCAL system alias and browser calls are successful and I see no errors when testing via the gateway client.
    ZTRANSPORT
    ZQUICKVIEW
    ZPAGEBUILDER_SERVICE_V_0_1
    ZPAGE_BUILDER_PERS
    ZPAGE_BUILDER_CUST
    ZPAGE_BUILDER_CONF
    ZLAUNCHPAD
    ZINTEROP
    ZLEAVEREQUEST
    The following components are installed and I have a combined frontend and backend system running on SAP ECC 6.0 Ehp7.
    SAP_GWFND     740        0009       SAPK-74009INSAPGWFND
    SAP_UI 740        0011      SAPK-74011INSAPUI
    GBHCM002        600        0014       SAPK-60014INGBHCM002 HCM Employee Requests (Leave)
    GBHCM003        600        0012       SAPK-60012INGBHCM003 HCM Manager Approvals (Time, Training,
    UIX01EAP          100         0005       SAPK-10005INUIX01EAP    UI for ERP Central Applications
    UIX01HCM         100         0005       SAPK-10005INUIX01HCM  UI for HCM Application
    UIX01TRV          100         0004       SAPK-10004INUIX01TRV   UI for Travel Application
    I’ve checked ICM logs, ran the cache jobs and authorisations trace.  I’m not seeing any errors anywhere so finding it impossible to troubleshoot
    Please help!
    Thanks
    Amanda

    For Approve leave requests :
    Business Catalog (Launchpad)
    SAP_HCM_BC_MANAGER_X1
    Business Group (Launchpad)
    SAP_HCM_BCG_MANAGER_X1
    PFCG role for Business Catalog
    SAP_HCM_BCR_MANAGER_X1
    PFCG Role for Technical Catalog
    SAP_HCM_TCR_T_X1
    For Employee :
    Business Catalog (Launchpad)
    SAP_HCM_BC_EMPLOYEE_X1
    Business Group (Launchpad)
    SAP_HCM_BCG_EMPLOYEE_X1
    PFCG role for Business Catalog
    SAP_HCM_BCR_EMPLOYEE_X1

  • Fiori Launchpad suddenly got empty

    Hello ,
    The fiori launchpad was working fine until today (the UI add on was patched couple of weeks ago to SP11. We are trying to integrate it into portal and today i went ahead and implemented the noclickjacking fiorilaunchpad.html
    Tested again and the direct fiorilaunchpad was fine and i could see my apps and tiles
    After may be 15 mins i tried to open the fiori LP and i get completely blue screen with nothing on it (like nothing is assigned). If i click on tile catalog it finds absolutely nothing. I have tried it with different users - still empty.
    I have checked and there are no errors in error_log not in slg1,
    A direct call for approve requisition app  http://xxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html?sap-client=100&sap-language=EN#PurchaseRequition  displays the correct data and i can see several requisitions that need to be approved.
    So i think it is not related to roles and authorizations.
    A user that has admin gateway and ui admin role can not delete the group from homescreen - if i click on it and want to drag it nothing appears  down right It was also working before
    The frontend has been restarted, icm cache and browser cache cleared as well, the odata services were deactivated and activated again.
    The admin url works fine too.
    I have also tried reverting to the original launchpad.html file but it makes no difference the problem persists
    Any ideas?
    P.S i have implemented the notes for SP11 and have been through the launchpad troubleshooting guide but may be i am missing something...

    2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported -  sap.ui2.srvc.Chip
    core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported
        at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
        at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
        at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
        at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
        at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
        at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
    core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
    core-min-0.js:91 2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported -  sap.ui2.srvc.Chip
    core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported
        at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
        at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
        at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
        at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
        at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
        at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
    core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
    core-min-0.js:91 2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported -  sap.ui2.srvc.Chip
    core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported
        at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
        at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
        at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
        at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
        at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
        at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
    core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
    core-min-0.js:91 2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported -  sap.ui2.srvc.Chip
    core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported
        at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
        at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
        at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
        at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
        at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
        at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
    core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
    core-min-0.js:91 2015-02-16 17:51:03 sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported -  sap.ui2.srvc.Chip
    core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.Error: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported
        at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
        at createApi (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:2294)
        at j (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chipinstance.js:2:511)
        at p (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/chip.js:2:1884)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at a (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:1643)
        at sap.ui2.srvc.get.m.(anonymous function) (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/library-preload.json/sap/ui2/srvc/factory.js:2:2320)
        at Object.sap.ui2.srvc.call (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:1838)
        at XMLHttpRequest.X.onreadystatechange (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:2957)
        at s.E.dispatch (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:2:2231) sap.ui2.srvc
    core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}): Contract 'actions' is not supported - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
    core-min-0.js:91 2015-02-16 17:51:03 Applauncher Tile not loaded completely -  sap.ushell_abap.adapters.abap.LaunchPageAdapter
    core-min-0.js:91 2015-02-16 17:51:03 Call to success handler failed: Applauncher Tile not loaded completely - sap.ui2.srvc.Error: Applauncher Tile not loaded completely
        at new sap.ui2.srvc.Error (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/ushell_abap/bootstrap/abap.js:26:5722)
        at isTileIntentSupported (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/us…ary-preload.json/sap/ushell_abap/adapters/abap/LaunchPageAdapter.js:2:6120)
        at isTileIntentSupported (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:118708)
        at sap.ui.base.EventProvider.extend._getTileModel (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:72286)
        at sap.ui.base.EventProvider.extend._getGroupModel (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:69888)
        at sap.ui.base.EventProvider.extend._loadGroup (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:69478)
        at Object.<anonymous> (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:68982)
        at t (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-0.js:32:24634)
        at Object.v.add [as done] (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-0.js:32:25027)
        at sap.ui.base.EventProvider.extend.loadGroupsFromArray (http://xxxxxx:8000/sap/bc/ui5_ui5/ui2/ushell/resources/sap/fiori/core-min-3.js:9:68898) sap.ui2.srvc
    core-min-0.js:91 2015-02-16 17:51:03 Failed to load tile: Applauncher Tile not loaded completely - sap.ui2.srvc.ChipInstance({oChip:sap.ui2.srvc.Chip({sChipUrl:"/sap/bc/ui5_ui5/ui2/ushell/chips/applauncher_dynamic.chip.xml"}),bFullscreen:false}) sap.ushell_abap.adapters.abap.LaunchPageAdapter
    In  the table /UI2/CHIP_CHDR i see this entry Failed to read UI2 CHIP configuration for CHIP name X-SAP-UI2-CHIP:AR_SRVC_NEWS. RC: 0 Path WebContent/WebContent/newstile.xml not found in SAPUI5 application ar_srvc_news
    When i run the delete cache report the entries in the above table don't disappear though

  • Error in Fiori Launchpad "could not start the app due..."

    Hello everyone,
    I am having a previously unseen (well, at least for me) error which raises on a click on the tile "Track Purchase Orders" on the SAP Fiori Launchpad:
    "Could not start the app due to an internal error" (see the screenshot attached)
    I haven't found any help on this error on Google and SAP portals.
    The other applications work fine. So did this one before the implementation of SAP_UI 740 SP09 (before that it was SAP_UI 740 SP08). We applied all the notes specified in this post http://scn.sap.com/docs/DOC-56967
    Components needed for Track Purchase Orders are patched to their maximum levels (UIX01EAP 100 SP03 and SRA020 600 SP05). OData and UI5 services are activated.
    Plus, this error doesn't appear in the Gateway error logs (transaction /iwfnd/error_log) so troubleshooting is difficult.
    The issue is systematically reproducible and has been reproduced on several computers.
    Thanks a lot if you have any insight about this issue!
    Best regards,
    Guillaume

    Thank you for replying.
    I have inspected the element and clicked on the tile. The network tab is below:
    The status seems OK.
    The response for ResolveLink:
    {"d":{"results":[{"__metadata":{"id":"http://<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","uri":"<server>:<port>/sap/opu/odata/UI2/INTEROP/NavTargets('PurchaseOrder-track~68')","type":"INTEROP.NavTarget"},"id":"PurchaseOrder-track~68","shellType":"FLP","postParameters":"","text":"Track Purchase Order","applicationData":"SAPUI5.Component=ui.s2p.mm.purord.tracking","applicationAlias":"TrackPurchaseOrder","applicationType":"URL","url":"/sap/bc/ui5_ui5/sap/mm_purord_tpo"}]}}
    I'm surprised that gbapp_poapproval and sra001 OData services are called here (with an intriguing ";mo")... We have found these errors in our /iwfnd/error_log screen after the SAP_UI 740 SP09 patch. Seeing this, we have installed GBAPP002 600 SP6 and SRA001 600 SP4 and activated the OData services but have not tried to use the corresponding apps (meaning that we have not done any other app implementation tasks because we don't really intend to for the moment).
    In case the two problems are related, these are the responses to these requests:
    For gbapp_poapproval request
    {"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB173F121613F0E1008000A87C135A","timestamp":"20140814124456.5404250","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
    For gbapp_prapproval request
    {"error":{"code":"GBAPP_APV_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0B1112160FA0E1008000A87C135A","timestamp":"20140814124456.4449070","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"GBAPP_APV_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
    For sra001_pcapproval request
    {"error":{"code":"SRA001_CMN_MSG/013","message":{"lang":"en","value":"Workflow Task Type is not passed as filter criteria"},"innererror":{"transactionid":"53EB0E4512161140E1008000A87C135A","timestamp":"20140814124456.3244590","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"SRA001_CMN_MSG/013","message":"Workflow Task Type is not passed as filter criteria","propertyref":"","severity":"error"},{"code":"/IWBEP/CX_MGW_BUSI_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error"}]}}}
    Regards,
    Guillaume

  • Integrate Custom App in Fiori Launchpad - Duplicate ID Error

    Hey guys,
    I integrated a custom app in the fiori launchpad. The first launch works perfectly. But if I go back via the navigation button and try to start my application again I get following error message:
    2015-04-23 23:40:28 adding element with duplicate id 'application-ZCUSTOMFIORIAPP-display_change' -
    This is excactly the application name from the url:
    http://....../shells/abap/Fiorilaunchpad.html?sap-client=001&sap-language=DE#ZCUSTOMFIORIAPP-display_change
    Any ideas how I can solve this?
    Thanks and best regards
    Chris

    in your component
    do you have?
    destroy : function() {
    if (this.oRouteHandler) {
       this.oRouteHandler.destroy();
      sap.ui.core.UIComponent.prototype.destroy.apply(this, arguments);

  • Custom SAPUI5 app in Fiori launchpad - wrong resource path

    Hi,
    I have successfully add custom tile for my custom  app to Fiori launchpad, when the application is run from its location (https://<server>:<port>/sap/bc/ui5_ui5/sap/zcart3/index.html) everything is ok, when I try to execute it from Fiori launchpad tile I got these errors:
    Error - found in negative cache: 'view/App.view.js' from ../../resources/view/App.view.js: 404 - NOT FOUND
    I think it is because SAPUI5 tries to load files from wrong location, so I have to somehow tell SAPUI5 framework where the files are...
    in the index.html I have these entries:
    data-sap-ui-resourceroots='{
      "zcart3" : "./",
      "view" : "./view",
      "model" : "./model",
      "util" : "./util"
    I think I have to add something to Component.js file of my app .
    Many thanks Jiri
    Tags edited by: Michael Appleby

    Hi Sekihara,
    many thanks for your suggestion, but I don't want to create Fiori application, I want to add my existing SAPUI5 application (which is working standalone) to Fiori launchpad, but when exetutes from Fiori launchpad, I got this error:
    Error - found in negative cache: 'view/App.view.js' from ../../resources/view/App.view.js: 404 - NOT FOUND
    Because FioriLaunchpad changed path to my application files from
    /sap/bc/ui5_ui5/sap/zcart3 to /sap/bc/ui5_ui5/ui2/ushell/resources,so the files of my app are not found...
    please see chrome console output:
    GET https://<server>:<port>/sap/bc/ui5_ui5/ui2/ushell/resources/view/App.view.js 404 (NOT FOUND) core-min-0.js:32
    2014-07-31 08:22:36 Error - failed to load 'view/App.view.js' from ../../resources/view/App.view.js: 404 - NOT FOUND 
    Thanks Jiri

  • Passing Parameter from fiori launchpad to the app in sapui5

    Hi All,
    I have a requirement to pass a parameter from Fiori launchpad to the application. Then i have to use that parameter to construct the OData service URL and read the data. So how can we pass the parameters from Fiori launchpad tile to app? Thank you in advance.
    Regards,
    Seshu
    Tags edited by: Michael Appleby (but please start doing this on your own)

    Hi Masa,
    I will explain scenario:
    I have Main.view.xml and Main.controller.js in my App. I read the data in Main.controller.js using the following statement.
    var bus_scenario="Lead to Deal Approval";
    oModel.read("BusScnCollection('"+bus_scenario+"')?$expand=BusinessProcess",null, null, true,function(data,response)
    Now my requirement is to get the value for bus_scenario variable from Fiori launchpad configuration.
    What I did in Fiori launchpad configuration:
    Then, When I launch my app by clicking on tile, the URL appears in the following way.
    https://<server>:<port>/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html#ZCIO_DASHBOARD-display?BUS_SCENARIO = "ORDER TO CASH"
    So I can read this parameter in Main.controller.js and assign to bus_scenario variable. But it is possible that user can change the parameter (from ORDER TO CASH to LEAD TO DEAL) directly in the URL, So that he can get the data corresponding to LEAD TO DEAL (which he should not get). Because when he clicks on ORDER TO CASH Tile, he should get only the data corresponding to it.
    So, is there any other way to send parameters from launchpad configuration to app, so that we can use those parameters in app (Main.controller.js) ?
    is there any way to hide parameters in the URL and send them?
    Thanks & Regards,
    Seshu

  • Mixed content error for FIORI launchpad designer

    Dear team,
    I have activated a ERP trial on AWS via CAL. Fiori launchpad and designer opens and works properly but when I am creating new tiles in a catalog, none of information on tile gets saved.
    I checked in Chrome console and following error is recorded when saving a tile:
    After allowing unsafe scripts, error changed to following:
    Any ideas?
    Best Regards - Anuraag

    Hi Anuraag,
    Please open the launchpad designer with http (not https). If you can not logon via http, change the protocol to  "Do not switch" in the SICF setting.
    Simple steps to configure Fiori Login\Logoff Page
    SAP Fiori - SAP Fiori launchpad troubleshooting
    Regards,
    Masa / SAP P&I Technology RIG

  • Need to find records posted from Fiori launchpad or Fiori application

    Hi,
    We have implemented Fiori Applications at our customer site now they want to identify or find out records posted from fiori launchpad and SAP ERP.
    Purpose of this activity to monitor the utilization of Fiori Application. Is anyone know how we can achieve this?
    Regards
    Shraddha

    Hi Sharddha,
    Please look at http://scn.sap.com/thread/3621724 and  http://scn.sap.com/thread/3336896
    It is better solution.
    Regards, Masa
    SAP Customer Experience Group - CEG

Maybe you are looking for

  • How to cancel email advice of every event change on a shared calendar?

    Since I migrated to iCloud and re-shared my calendars, my wife gets an email every time I add, delete, or modify an event in a shared calendar. I can't find the setting to shut this off. Where do I look?

  • Can I use a Linksys WPC11-VN?

    I have a factory sealed Lynksys WPC11-VN v.4 wireless card I'd like to put to use in my iMac SE 600. Will it work in the Airport slot? Any opinions/advice would be most welcome. Thanks! --ryan iMac 333MHz, iMac 600MHz   Mac OS X (10.2.x)   Bluetooth

  • Having Trouble with nested Case Statements

    Hi Folks, I'm having trouble getting my head round nested case statements. For the life of me I cannot see what I'm missing here (unless my approach is all wrong). Any help much appreciated. Script: set serveroutput on format wrapped set feedback off

  • Change color on a button to show that it has been selected.

    Here's what I would like to do: 1) Button with the instance name of "mc" and the color #666666 2) MOUSE_OVER color is #CC0033 3) MOUSE_OUT color is #666666 -IF the button has NOT been clicked. 4) CLICK color is #333333 5) New MOUSE_OUT color is #3333

  • Change the Request Field after it is submited

    Is it possible to change the Request after it is submited in Access Enforcer 5.2 ? Please advise. Thanks and let me know. Regards, PT.