Re: How make delivery group field mandatory in va02 in shipping tab in sap abap

/h
Hi experts i want to make delivery group field mandatory in va02 in shipping tab using enhancements. can anybody help me
<removed by moderator>
With Best Regards
Nagaraj
/h
Message was edited by: Manish Kumar

Hi Nagaraj Muniyappa,
Can please show me a snapshot of the same? Because I didn't found any delivery group field in shipping tab in VA02.
And there are many exits/badis are available for sales order you can use them.
regards,
Rajesh Sadula.

Similar Messages

Vendor Master Management - How to make 'Corporate Group' field an autoupdat

Vendor Master Management - How to make 'Corporate Group' field an automatically updated field
Frnz,
I am doing a Spend Analysis and thereby restructring some aspects of SAP and business processes. One of the intiatives is to leverage the 'Corporate Group' field in Vendor Master for getting the consolidated spend visibility at the corporate group level of vendors. So far this field wasn't been used to effect. I can update it manually, but the question remains is how do I do with the change management of the corporate group of large vendor base in the scenario of everhappening Mergers and Acquisitions. Are there any alternatives anybody can suggest ? (Like linking D&B numbers etc)
Thanks in advance for your suggestions..

Hi Shiv,
Let me elaborate the purpose of using this field. I want to have a consolidated spend visibility across a corporate group which has multiple vendor codes. Its difficult everytime to group the spends of these vendors manually especially when the number of vendors are too high. Also sometimes the names of vendor companies may not indicate that these are from same corporate group but in fact they could be. In order to have the reports generated on corporate groups, I must maintain this field in vendor master or a Z table. But the problem here is, it should be possible to update this field as and when there are any mergers or acquisitions at vendor side and the corporate group of a particular vendor gets changed due to this. So this has to be effected in vendor master or Z-table automatically. I do know that there are certain agencies like Dunn & Brad (DNB) which provide possibly the details on corporate group of a company but its not fully effective for Indian Vendors as its not mandatory on them to have DNB number & also its a disconnected process and I was looking to connect it seamlessly to Corporate Group field so that I need not bother to update these things manually everytime. I also wanted to explore various possibilities of doing this.
I hope I have spelled it out correctly.

How to make Sales Office field mandatory in VA01 initial screen?

Hi,
How to make Sales Office field mandatory in VA01 initial screen? I mean in the first screen where we enter the document type and the sales area?
Regards,
Ajit

Dear Deepak,
Thanks for the clarification.
But, as far, I have understood the query - it is very simple and that is..
Whenever one creates a Sales Order (T.Code: VA01), Parameter: Sales Office needs to be mandatory (for all Sales Order, irrespective of Customer Account).
Until-unless, user won't enter the parameter: Sales Office, System will not lead to next page (now, here we need to enter Customer/ material etc...).
I have answered the query, in this regards, only.
Best Regards,
Amit.
Note: Pls. correct me, if I am wrong. Thanks for everyones guidance.

How to make tax classification field mandatory in sales order ?

Hi,
while creating sales order, " how to make tax classification field mandatory ".
Please tell me the procedure.
In tcode OVA2. what are the entries for fields,table.
Regards,
sapsduser

Dear ,
Could you please share why you want to make tax Classification field mandatory in sales order.
Maintain Tax classification field for customer in Customer Master Data = (Sales Area Data - Billing document Tab page)
Tax Classification field for Material in Material Master Data = Sales Org. 1 View.
While creating sales order and enter customer and material system automatically fetch the tax classification related data into sales order.
Tax is calculated based on the ship to party.
Hope this will help you.....
Regards,
Manoranjan.

How to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?

Hi,
how to make the CATEGORY field mandatory in the SMIN Support Ticket in test management?
Rg,
Karthik

Hi Kamal,
This note steps will no validation that the user actually enters a value and the message will be created even if this 'required field' is left blank.
Any other way to validate the enter a value also?
Rg,
Karthik

Can you suggest how I can make only "salesperson" field mandatory?????

Hi gurus,
I want to make the field "Salesperson" in the Communication tab in the PO header mandatory.
When I set the field selection accordingly(field "salesperson" as required entry), other fields such as your reference, our reference, telephone number becomes mandatory.
can you suggest how I can make only "salesperson" field mandatory without making related fields mandatory?????
Regards
Sara

Hi,
Go to spro->MM->purchasing->PO->Define screen out at document -> select NBF ->Reference data, header->set field Reference, salesperson etc. as mandatory.
reward full point if resolve,
Regards,
Chetan.

How to make material code field mandatory in VA01

Dear all,
I want to make material code field mandatory while creating sales order (VA01). As of now even if I dont enter material code , and just enter customer code and P.O. number , I am able to save my sales order.
I tried to do it with incompletion log , but could not succeed.
SHD0 could be an option, is there any simpler way out ?
Please suggest.
Regards,

Hi,
You have 2 options.
1 - Incompletion Log
If you add Material filed to your incompletion log, then when you try to save the sales order it'll give the "Save / Edit" pop up message. But then by pressing Save button you can save the sales order.
If you want to avoid that pop up; do this. (To avoid user saving Incomplete sales orders)
Go to VOV8 Tx.
Go in to your sales document type
Under "Transaction flow" section mark the "IIncompletion messages" tick box
Then try with a new sales order without a material number
If won't give that pop up message any more where as it'll always go in to the incompletion log. So you can't save it without maintaining the material.
That's a alternative way of doing.
2- SHD0.
Best regards,
Anupa

Need to Make end customer field mandatory in sales order form.

I need to make end customer field mandatory when sales channel entered as some value...
for this i have used when validate record on order form
when i enter a value in sales channel as desired value the form is getting saved automatically and the field is getting mandatory
but my requirement is to make field mandatory and then to save the order.
let me know the sequence how it works if any one knows.

Sanni,
>
when i enter a value in sales channel as desired value the form is <b>getting saved automatically</b> and (then) the <b>field is getting mandatory</b>
but my requirement is to make field mandatory and then to save the order.
>
Which trigger are you using to do the "getting saved automatically'?
Does this trigger fire before the trigger that is making the field mandatory?
Regards,
PS: Is this an Oracle EBS query? If yes, this is the wrong forum
Edited by: Prabodh on Jun 14, 2012 4:48 PM

Make Account assignment field mandatory in VF01 at item level

Hi All,
I want to Make Account assignment field mandatory in VF01 at item level in accounting block.
Please guide.
Thanks ,
Salman Zahir

Hi,
Goto T.Code:SE51
Program name:SAPMV60A
Screen number:6106
Select Flow Logic.
Click on Change.
Click on elelment list tab.
Search for VBRP-KTGRM field.
Two options you are going to identify.Select the entry which is having the "type of screen element" as "I/O".
Click on special attributes.
Input is enabled as "Possible".Change it to "Required" from drop down.
Save.
It will be appeared as mandatory.
One more way is use of an exit.
Ask your ABAPer to check for this field entry while saving the invoice.As we know incompletion log will not work out here in invoice,so we are going for an exit.
If there is a value for this field then only we can save the invoice,else not.
Regards,
Krishna.

How operation (Activity No) field mandatory can be removed in Network.

Hi,
In CAT2 time entries screen for a person who worked on service order,
directly I can book time entries of the person with service order number without entry of operation (activity number) in CAT2 screen, no problem with service order case..
But in case of CAT2 time entries screen for a person who worked on PS network*, entry of network operation field (Activity number) is mandatory.
Please suggest how operation (Activity number) field mandatory can be removed in case of time entries to PS network in CAT2 screen.
I want to book time entries of the person only to the Network number don't want to include operation number in CAT2 screen.
Thanks & Regards
SR .

I dont think it would be possible to book timesheet entries directly against a network. Moreover i haven't come across any business scenario that demands timesheet entry against the network header.
Moreover, how do you think the system will calculate the cost if you book timesheets against a network? In a standard scenario, when timesheet is booked against a network activity system calculates cost based on the work center maintained in the activity. Work center has the cost center and the activity type combination for which rates are maintained in KP26.
Lastly, could you please explain the business need behind booking timesheets against a network header?

How to make "Marketing lead" fields Mandatory ?

HI Experts ,
I have very urgent requirement . I have to make "Marketing Lead" attribute mandatory and what object is behind it .
I have to make "Phone" & "email" as mandatory fields but i don't know where to start and what object i have to enhance .
Any suggestion will really appreciated .
Regards ,
Rishi

Hi Rishi,
That's probably COD_MarketingLead.QC screen.
Open this screen, select the Section Group, go to Ext. Explorer, and click on Adjust Properties.
Find the field you want to set as mandatory and change this property to True. This will make the blue star appears right next to the field.
Then write a logic just like suggested by Sunil in the OnSave.absl script to add a hard stop in case the field is not filled, with error messages, etc.
Hope this helps!
Best regards,
Fernando Giroleti
SAP Cloud Service Center AMEA

How to gray out fields in VA01 & VA02

Hi All,
My requirement is to restrict manual entries of line items.
While creating a credit memo with refrence to billing document the items from billing document gets copied to this document.
User wants to restrict entering more line items apart from these.
Therefore the rows after the last line item should be grayed out i.e in display mode. (Not the columns).
This should happen in VA01 & VA02 transaction.
I have found the Userexit_field_modification in include MV45AFZZ.
Also the screen nunmber is 4902 and table control TCTRL_U_ERF_GUTLAST whose screen input should be 0.
Please let me know if there is some other way by which this can be achieved also if this is correct; then how should I proceed with the logic.
Thanks in advance.
Regards,
Darpana.Ahire

Hi,
For doing so you can use the concept of the transaction variants. Using transaction variants, you can do the below:
1) Make fields mandatory on screen
2) Hide fields on the screen
3) Default values on screen fields
4) Make fields input disable on screen.
Hence for doing this, go to SHD0 transaction and do the recording for the standard transaction. Once done Save the transaction variant.
Finally from menu((tab page: Standard Variant in SHD0): Activate as Standard Transactions variant.
Give the Name as your Transaction variant name.
Once you active the transaction variant as the standard variant, then if the std transaction is called, the screens which you defined in the transaction variant will be called.
No code changes need to be done. The transaction variant will only change the appearance of the screens
Regards
Shiva
Edited by: Shiva Kumar Tirumalasetty on Sep 11, 2009 4:41 PM

How to Activate "Site" Field in MIRO - G\L Account Tab

Hi Experts,
I need to make "Site" Field in Tcode MIRO - G\L Account Tab as inputable field for User which is currently not visible in screen.
This field is available in Standard Layout provided in SAP as Invisible.
I cannot able to make the field as Optional in Standard Layout.
The field is also available in Structure ACGL_ITEM-WERKS.
Can Anyone tell me how to make the field ready for User Input in MIRO Screen.
Thanks and Regards,
Selvakumar. M

Hi Selvakumar,
                                                                                Please note that the following fields are not supported for G/L direct posting in MIRO:
ACGL_ITEM_VALUT (Value data )
ACGL_ITEM_VBUND (Trading partner)
ACGL_ITEM_GRICD (Activity code)
ACGL_ITEM_GRIRG (Region)
ACGL_ITEM_GITYP (Distrib.type for employ tax)
ACGL_ITEM_FKON (Fin. Budget item)
ACGL_ITEM_ETEN2 (Sched. Line is sales order)
ACGL_ITEM_WERKS (Plnt)                            <<<
ACGL_ITEM_EBELN (Purch.doc.)
ACGL_ITEM_EBELP (Purchase document item number)
ACGL_ITEM_PRCTR (Partner profit center)
ACGL_ITEM_BEWAR (Trans. type)
ACGL_ITEM_MATNR (Material)
ACGL_ITEM_BWTAR (Material valuation type)
These fields are not saved in the logistic invoice document so their value can not be transferred. They can be made visible by changing   screen variant however, this still means that the fields will not be ready for input, you can only see them. technically, when an invoice with the item referred to a G/L account is posted, the field 'Plant' cannot be properly saved in the database table RBCO, because there are no fields for them in the table RBCO
and this can cause problems by following processes. The field can be made visible by changing screen
variant however, this still means that they will not be ready for input.
Regards,
Mauro

Grouping field value in the additional data tab is saved with capital lette

Hi,
Whenever I change the value in the 'Grouping field' in the additional data tab, it gets saved with all letter caps.
For e.g, if i enter 'Manager'.. it gets saved as 'MANAGER'.
what could be the reason for this? Is there any configuration for this?
Regards,
Simmi

Hi Simmi,
For Grouping and Search Field, this seems to be the standard system behaviour in cProjects and as per my knowledge there are no settings for the same.
Probably you can raise an OSS message regarding the same.
Regards,
Vivek Pandey

Help required: how to makes sales office field mandatory, in inquiry and qu

I want to make the field sales office as mandatory , in Inquiry and quotation, please guide me how i can do it.

hi
if so then u do one thing.. enter the Tcode and then in variant name .. keep the field empty and search for Transaction variant by giving only the tcode.VA11
if u find any transaction variants for Va11 then u can use that or else serach with VA01 and c how many Transaction Variants u r getting.. to my guess u must only be getting BUS2030..
if that is the case u have to create new transaction variant for va11 and then proceed the process
=====================
GOT THE SOLUTION
=====================
SHD0 > enter tcode VA11 > F5 > Give the Enquiry type (IN) > give the details sales org, dist chnl, div, > Press Enter > will get the fields with options..
Same in the case of VA21 .. giving sales org , dist chnl, div is not compulsary.. just give the document type and can proceed..
Reward if USeful
Thanx.. Naren..

Re: How make delivery group field mandatory in va02 in shipping tab in sap abap

Similar Messages

Maybe you are looking for