Re-importing from CD after error

When re-importing CDs even tho I choose replace existing.
I have multiple *.mp3 files for a single song when viewed though explorer.
These do not show up as multiple copies of the same song in Itunes.
Is it ok for me to go out a delete these files based on the criteria that the largest mp3 file would be the complete song? If I delete the others will there be a problem?
This was due to the dual core issue Itunes had.

It sounds like your Import Action is set to 'Add'. If you want to copy the files to your HD and organise by date then you need to select 'Copy' as the Import Action, then your extended import options will appear in the right-hand panel. Use the Destination pane to tell Lightroom where you want the files copied to, and in the same pane you'll have the options to organise by date.

Similar Messages

Importing from Lexar card - error message

This has happened twice on two cards - one 4gb and the other 2gb, so not the same card but same camera (Nikon D2x). Get the error message " ICA download error -9919) occurred ...
Anyone any ideas if this Camera vs Leopard, Lexar vs Leopard or Aperture vs Leopard. As this never happened before Leopard and Aperture update.
Images are rescued from card via Lexar software, but it is a worry.

Hello, I've just upgraded computers, and as Leopard is on the new machine, gone from 10.4.10 to 10.5.1, and I'm now getting this ICA download error - 9919 while trying to import as well.
I'm using a Sandisk Extreme III 2gb card, and Aperture version 1.5.6. Storing the files in the Aperture library.
I've tried to change the permissions settings as indicated in this thread and the blog post at Inside Aperture, but it doesn't seem to be doing anything for me. And the permissions don't seem to be any different for the folders/files as they were in 10.4.10 (where everything was working fine).
The odd thing is, the card I'm trying to import from has both jpg and raw files on it, and Aperture will import all the jpg files no problem - it doesn't give me the error until it gets into the raw ones. So it seems like if it actually was a permissions issue, this wouldn't be the case (?)...
I went back to my old computer running 10.4.10 and tried it there, and everything works fine. So it seems to somehow be related to the switch to 10.5.1. I have the library in the same place, and haven't changed any other settings. I'm able to access all my existing photos on the new computer, so I believe everything's in the right place.
Anyone else having this issue where the permissions fix didn't resolve it? Any advice would be greatly appreciated!

Import from scanner give error message "This file already exists in this catalogue"

I can import from the scanner occasionally, but often times get this error message. " this file already exists in this catalogue" and the scanned picture is discarded.
I see others have had it as well, but no solutions were posted. I'm running Photoshop elements 11 with all current updates.

Thanks for the reply. My Image wasn't in a version set however. I scanned a new photo which was successsful. I then scanned a second photo different from the first, which failed. I think possibly the software for my HP scanner is at fault, since it always names the scans as image1.jpg. It doesn't give an option to increment successive scans to a different name which probably caused the problem.

Trouble importing from p3 after office install

Has anyone else had trouble importing photos from digital camera after installing Office for Mac 2011? Now iPhoto won't recognize my files, and what came up in the import folder were about 160 icky clip art icons, which I quickly deleted. If there's a fix (other than uninstalling software), please advise.

Terence, hi. I'm doing what I had done previously (successfully), plugging in my Nikon digital camera via the USB port and turning on the camera. I checked preferences and it's set to connect the camera in iPhoto.

No Audio in import from iPhone after 24 seconds

First, I'm not an iMovie expert in the least, but I've been trying to work through it and learn as I go. I'm having a problem where I'm trying to import video clips from my iPhone, and after I go back and watch the imported clip, the audio stops after 24 seconds. It does it with every imported clip from the phone, every time. And, like clockwork, it stops after 24 seconds every time.
I also have a JVC camcorder which I've imported clips off of its SD card, and all those import just fine. So it's only having the problem with the clips from the iPhone. I can play the clips both on the phone and in the iMovie import window (before it's imported) and they play fine all the way through. I only lose the audio after it's imported.
Any ideas are appreciated.
Macbook Pro OS X 10.8
iPhone 5.1.1
iMovie 9.0.7
Oh, one other question maybe someone can answer. When I connect my iPhone to my mac to import, my iPhone turns its WiFi hotspot on. This then forces my mac to use that for its internet connection instead of my home internet. The WiFi in the menu bar still shows connected to my home network, not the hotspot, but I think it's going through the USB connection. When it's connected and I turn off the hotspot, the phone will then disconnect from iMovie. Is this normal? Is this how it's supposed to work? Any way to prevent that?
Thanks!

I had the same problem so what I did is to download a streamclip media free software, search out from google, then when the clip from memory card are downloaded onto computer I open them with streamclip media and then export them in compatible format , there is option on file menu, I don't reme,ber now as I am replying from a cPC, but this works, so save this exported clip and use it in i movie it plays sound.
idocmac

How to import from Adobe After efects to FCP?

Hi guys. I made a text sequence in Adobe After Effects, it is a "composition".
When I try to import it into a sequence in FCP it imports the sequence background from AE and therefor does not overlay the text over my clip but rather blocks out my clip with the AE Background.
What am I dong wrong? How do I make text in AE then overlay it in a squence in FCP?

In the Render Queue click on the name of the output module.
Under the Video Output section choose *RGB + Alpha* from the Channels menu
Then from the Color menu choose *Straight (Unmatted)*

Tabular: Import from text file error : The provider 'Microsoft.ACE.OLEDB.12.0' is not registered.

I'm trying to import a text file into a tabular model in SSDT
windows7 64 bit
I have office 2013 32bit installed. Will not uninstall this as I need it.
How do I import a csv file into the tabular model?
i've downloaded both 32 and 64 bit access redistributables from here: http://www.microsoft.com/en-au/download/details.aspx?id=39358
64 bit refuses to install (already have 32bit office tools installed)
32 doesn't stop the error - i'd assume i'd already have the correct 32 bit drivers installed since i have the full office 2013 suite installed.
I've looked at some of the other topics around and they are either unanswered or the poster didn't have office installed so could install 64bit redist
Thanks
Jakub @ Adelaide, Australia Blog

see if this helps
http://visakhm.blogspot.in/2011/11/excel-2010-export-import-issue-in-64.html
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

My bookmarks are gone. help! accidentally imported from IE after an update to my computer. how do i get my firefox bookmarks back?

had an update to my computer this morning. when i opened firefox a pop up came up with the import bookmarks from internet explorer checked, i didnt notice that until i had hit ok. now all my firefox bookmarks are gone. how do i get them back? im on windows 7, latest version of firefox, current as of right now.

You get the import wizard if the profiles.ini file that registers all Firefox profiles is missing.
*http://kb.mozillazine.org/profiles.ini_file
You can check if there still is an older profile folder.
*http://kb.mozillazine.org/Recovering_a_missing_profile
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Importing from FireFox after a Win7 re-installation

I had to re-install windows which put my old files into a sub directory called Windows.old
My bookmarks I'm sure are in there but not sure how to import them into my new instance of Firefox, any suggestions?
Steve

Did you find the old Firefox Profile Folder?
*http://kb.mozillazine.org/Profile_folder_-_Firefox
The "Application Data" folder in XP/Win2K and the "AppData" folder in Vista/Windows 7 are hidden folders.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
See also:
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Iphoto wont import from iphone after 4.01 upgrade

have about 600 pics and 50 short video clips on wifes iphone 4 4.01 OS. When connect to imac with iphoto it looks like its going to load then it shows the iphone has 0 pictures. When you go to the phone and select photos the photos are on the phone and you can view them?
I have rebooted the imac and have rebooted the phone but no fix?
imac is 10.6.3

Try this fix offered by Robin a while ago:
Robin Johnson
Re: ios update problem - 7.1 11D167 iphoto not picking up new photos
This solved my questionRe: ios update problem - 7.1 11D167 iphoto not picking up new photos
Mar 20, 2014 7:15 AM (in response to JdinPa)
I figured out the fix for the Mac users having this problem. I connected my iPhone to my iMac and started iTunes. A dialogue came up in iTunes, I OK'd that and then OK'd the usual "Do you trust this Mac" that comes up on my iPhone.

Event 109 with full import from cloud

After installing the AAD Connection Tool we find the step which does a full import from the cloud errors with stopped-extension-dll. This generates 3 error logs in Event Viewer 109 - 6801 - 6803.
109 -
Failure while importing entries from Windows Azure Active Directory. Exception: System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
6801 -
The extensible extension returned an unsupported error.
The stack trace is:
"System.FormatException: Index (zero based) must be greater than or equal to zero and less than the size of the argument list.
6803 -
The management agent "xxxxx.onmicrosoft.com - AAD" failed on run profile "Full Import" because the server encountered errors.
Researching suggests an expired cloud account password, but I have verified this is valid. I have also reinstalled/reconfigured the product several times.
I need advice for getting the Full Import to work.
Adam

This worked for me:
Please choose the Azure Connector in Synchronization Service Manager tool, in there properties - Select Object Types - please add "device" to add the selected object ( just set the hook ) . Then again start the
Delta or Full import, please.
If is any Device entry in the AZURE => for whatever reason => this is the only way to sync in the momment with the AAD Sync Tool at this time.
Explanation:
The Delta Import terminates because
the online tenant objects are of type
"device" available
We run the import to fail because
the design of the Azure Connector does not include
this type
of object
Unfortunately, the connector does
not in this case but breaks with this
error message
The current solution is then
the object type "device" for the
Azure connector to add to take
In a later version of AADSync this is
probably revised, the "device"
does not have to be selected from then on
the object type, but that
the connector will work here and does not end
with this error message
good luck

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version"

After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version". Any help will be greatly appreciated.

Sorry,
Yes, the error message is exactly like that ("Database error: failured to persist version")
No photos will import at all. I use USB to import from iPhone 5s or iPad 2.
About the difference? iPhoto and Photos . Are there two softwares?
I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro, iPhone 5s and iPad hard drives using iPhoto. It's call iPhoto library. At one point I turned off streaming.
Thanks again Larry HN.

Data import from EBS failed via FDMEE in fdm . Getting error message as "Error connecting to AIF URL.

FDM Data import from EBS failed via FDMEE after roll back the 11.1.2.3.500 patch . Getting below error message in ERPI Adapter log.
*** clsGetFinData.fExecuteDataRule @ 2/18/2015 5:36:17 AM ***
PeriodKey = 5/31/2013 12:00:00 AM
PriorPeriodKey = 4/30/2013 12:00:00 AM
Rule Name = 6001
Execution Mode = FULLREFRESH
System.Runtime.InteropServices.COMException (0x80040209): Error connecting to AIF URL.
at Oracle.Erpi.ErpiFdmCommon.ExecuteRule(String userName, String ssoToken, String ruleName, String executionMode, String priorPeriodKey, String periodKey, String& loadId)
at fdmERPIfinE1.clsGetFinData.fExecuteDataRule(String strERPIUserID, String strDataRuleName, String strExecutionMode, String strPeriodKey, String strPriorPeriodKey)
Any help Please?
Thanks

Hi
Getting this error in ErpiIntergrator0.log . ODI session ID were not generated in ODI / FDMEE. If I import from FDMEE its importing data from EBS.
<[ServletContext@809342788[app:AIF module:aif path:/aif spec-version:2.5 version:11.1.2.0]] Servlet failed with Exception
java.lang.RuntimeException
at com.hyperion.aif.servlet.FDMRuleServlet.doPost(FDMRuleServlet.java:76)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

Destroyed Library in iPhoto 08 after import from 09

This is a bummer: I have iPhoto 09 on my new MacBook and 08 on my iMac at home. As I imported my pictures from "on the road" on my MacBook, I made the library available and opened it from my iMac (08). I then imported the photos from the 09 library.
The first time I did this, the pictures from 09 were in the 08 library, but no thumbnails were shown at all. So I deleted them and did the import again. And presto, they showed up fine.
The next time I started up iPhoto, it indicated that "this new version... rebuild Thumbnails". I cancelled out, as I needed to send a photo by email. At the next start, I went ahead and let it "rebuild" (whatever). After that, only the last three events - i.e. the ones I had imported from 09 - were visible.
I did a library rebuild. I purchased "iPhoto Library Manager" and did a rebuild via that. Nothing helped. The photos are still there, but the entire library seems to be completely shot.
Before I laboriously start re-importing all the pictures from the library - does anyone have any other ideas? Delete some file to have iPhoto rebuild it, etc? I would very much like to not have to redo everything - I've read other people's accounts of re-imports and they are a real pain - especially with 50+gigs of photos.
Thank you!

Hans
I was hoping for an error message with iPhoto Library Manager not iPhoto. It will usually cough something up if it has a problem.
My TM certainly does back up iPhoto. I'm not sure why yours wouldn't. Try post on the TM forum here
http://discussions.apple.com/forum.jspa?forumID=1227
for more info and help with that.
Here's my back up strategy: pick and choose as you think fit:
My Library lives on my iMac.
It’s Backed up to two external hard disks every day. These disks are permanently attached to the iMac. These back ups run automatically. One is done by Time Machine, one is a bootable back up done by SuperDuper
It’s also backed up to a portable hard disk when ever new photos are added. This hard disk lives in my car. For security, this disk is password protected. For this job I use DejaVu because it makes a simple back up that is clear and can be tested easily without doing an full restore.
I have a second off-site back up at a relative’s house across town. That’s updated every 3 or 4 months.
My Photos are backed up online. Personally I use SmugMug but there are many options including flickr. However, check the terms of your account carefully. While most sites have free uploading, you will often find that these uploads are limited in terms of the file size, or the bandwidth you can use per month. For access that allows you to upload full size pics with no restrictions you will need to pay.
Every couple of months I test the back ups to make sure they are working correctly. It’s very easy to mis-configure a back up application, and the only way to protect against that is to do a restore.
Regards
TD

I get a Pre-execute error message when importing from Excel using the wizard.

Hello, I get the following pre execute error message(see below) when I try to import a table from Excel when using the wizard. I wrote my own code in the edit window. i noticed after writing it that the data types did not appear changed in the mappings window.
Can anyone explain what these errors mean and how they can be solved. Thank you.
Operation stopped...
- Initializing Data Flow Task (Success)
- Initializing Connections (Success)
- Setting SQL Command (Success)
- Setting Source Connection (Success)
- Setting Destination Connection (Success)
- Validating (Success)
Messages
* Warning 0x80049304: Data Flow Task 1: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator,
or on the system's console.
(SQL Server Import and Export Wizard)
- Prepare for Execute (Success)
- Pre-execute (Error)
Messages
* Error 0xc0202009: Data Flow Task 1: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "The metadata could not be determined because every code path results in
an error; see previous errors for some of these.".
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid object name 'dbo.PriceTable$'.".
(SQL Server Import and Export Wizard)
* Error 0xc0202040: Data Flow Task 1: Failed to open a fastload rowset for "[dbo].[PriceTable$]". Check that the object exists in the database.
(SQL Server Import and Export Wizard)
* Error 0xc004701a: Data Flow Task 1: Destination - PriceTable$ failed the pre-execute phase and returned error code 0xC0202040.
(SQL Server Import and Export Wizard)
* Information 0x4004300b: Data Flow Task 1: "Destination - PriceTable$" wrote 0 rows.
(SQL Server Import and Export Wizard)
- Executing (Success)
- Copying to [dbo].[PriceTable$] (Stopped)
- Post-execute (Stopped)
frustrationmultiplied

Hello,
Are you willing to try other ways to do the same?
http://www.excel-sql-server.com/excel-import-to-sql-server-using-linked-servers.htm
http://support.microsoft.com/kb/321686 (Distributed queries)
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Re-importing from CD after error

Similar Messages

Maybe you are looking for