RE: issue with sample watermark apperaring in purchase order

Hi Team,
our client is facing an issue when Purchase order is got created from production and when it is released an email notification is been send to vendor and today in the purchase order sample watermark is appearing in the background when i crosschecked in the print preview i can't able to see the sample watermark and also when user gets an email notification for release the PO i cross checked Purchase order attachement there also i can't able to see the sample watermark also there is no change in PO output type.Kinldy can you please suugest the root cause of the issue.
Thanks in advance

Had you logged into the wrong system? e.g. QA system instead of Production?
It is usually not appearing by itself, something must have been changed in your environment. Are you sure the form or the print program was not modified? was the printer exchanged?

Similar Messages

Performance issues with unibody Macbook Pro 2009 purchased in October 2009

I have a 3.0Ghz Macbook Pro 15" which came installed with Snow Leopard.
I specified the machine with a 7200rpm 500GB drive although I had heard there were issues with these drives. I have installed Office 2008, CS/3, firefox, chronosync and fusion 3.0.
Since I have had the machine it has got slower and slower. Which surprises me given the configuration and the fact that I have 8GB of RAM. It should be quick.
I notice that it has become even slower since downloading a 'performance update' via software update which I installed when software update told me it was available yesterday, October 28th.
Has anyone else experienced the same problem? I also notice that these machines run very hot. I have read a lot of discussion which says that using Vista under fusion can make the machine run very hot. I have tried quitting fusion to see if the performance is any better and the machine still runs very hot and the performance is still awful.
To say that I am disappointed in such an expensive machine not performing properly is an understatement. I have a MacPro which apart from a graphics card replaced under warranty has never misbehaved itself.
I am not sure what all this 'Apple fanboy' nonsense is about - as far as I can see Apple with the notebook line seem to be releasing products which purport to be very advanced but in reading through the forums there seem to be nothing but problems with them.

Yeah, I was kinda worried since it is new. I thought maybe I could somehow adjust the brightness on the screen to make the bottom and corners brighter. And perhaps it was a software issue that was causing the keyboard to malfunction. And definitely have no clue about the headphone jack noises. And the bent display. Hmmm. I guess I will call AppleCare.

Issue with Serial number inheritance in PP order

Hi gurus,
We have an issue with inheritaning component material serial no. to header material.
For production order having different header material and component material,on GI, the serial no. assigned to component is inheritated to header material. We can see the serial nos. in order, Header --> Serails Numbers. This functionality has been implemented in BADI 'MB_MIGO_BADI' method POST_DOCUMENT' using FM 'SERNR_ADD_TO_DOCUMENT'.
But, the issue is when the production order is having same header and component material. And on GI, the serial no. is not getting inherited into header material ie., the serial nos. are not visible in production order ,Header --> Serial Number.
Is there any other FM for handling the serial numbers for order having having same header and component material?
Note: The material is serialized material.
Thanks & Regards,
Chandra Sekhar.

Tried the "live" chat. What a waste of time:
Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 0 minute(s) and 54 second(s) or longer as there are 1 customer(s) in line ahead of you.
You are now chatting with Farook.
Farook: Hello! Welcome to Adobe Customer Service.
Farook: Please allow me a moment to review your request.
Farook: Hi Martin.
Martin: Hi.
Martin: For reference the serial number is <deleted>
Martin: Purchased from Amazon.co.uk in January.
Farook: I understand that you are unable to install the software. Am I correct?
Martin: No. I installed it, activated it fine on my laptop but when I tried to do the same on my desktop PC the serial number conflictr was detected and both are now blocked.
Martin: Farook, I suspect you won't find this in your FAQs, since it isn't on the support website. Can you escalate?
Farook: I am sorry to hear that.
Farook: Can I have your full name and email address?
Martin: Martin Lampard
Martin: <deleted>
Farook: Thank you.
Farook: Martin, I am sorry, the serial number which you have provided has not registered with.
Farook: Hence, you need to contact Amazon.
Martin: Rubbish. I had activated it on my laptop. I am 100% certain.
Farook: I understand Martin.
Martin: How did you check the serial number?
Farook: Could you please re-confirm me the serial number?
Martin: <deleted>
Farook: Thank you.
Farook: Martin, I am sorry, you need to contact Amazon.com.
Farook: I am sorry for the inconvenience caused to you.
Martin: Why? They sold me a working copy of Dreamweaver.
Farook: I understand, but I do not have enough resources to help you further.
Farook: Please contact Amazon.com.
Martin: What a waste of time. Makes me sorry I bought this Adobe product.

How to show CVD as CENVATABLE (ie with set-off) in Import Purchase Order

Dear Sir,
In our existing SAP system , the Import Purchase having CVD are showing CVD as Delivery Cost . However we desire that CVD being CENVATABLE should get reflected with a Set-off in the similar fashion as cenvatable EXCISE-DUTY is being shown incase of DOMESTIC Purchase Order .
We request you to kindly pl guide us about this pl .
With Regards
Sonia Agarwal

Hi friends
As suggested in the posted reply , I have done following :
a) For CVD condition , Maintained accrual as FR3 in pricing procedure
b) Tick the condition as Statistical
c) In J1ID maintained Material as Raw-material
But still , the net value appearing in Purchase Order , includes the CVD .
Kindly guide us pl .
Regards
Sonia Agarwal

Problem with Delivery Type Determination in Purchase Order

Dear All,
We are working on a IS-Retail Scenario where we are dealing with generic articles. While creating a PO, we have encountered an error which says:"Also specify a delivery type in case of shipping data relevance". The error message number is MEPO 099. We have checked that Delivery type NL is attached to the document type under the supplying site customizing, and supplying site is attached to the receiving site with the correct document type. Can anybody throw some light on what we might be missing out in this scenario?
Thanks and Sincere Regards,
Amitabha

Hi
I suppose you are creating a retuns PO ,
Please maintain the customizing of the same in SPRO-> MM -> Purchasing-> Purchase Order-> Returns Order-> Store Return / Return Plant to Plant
here you need to maintain the delivery type for returns.
This message is trigerred only in case of Returns order
In SAP Retail, plants are referred to as distribution centers or stores. With store returns, you can map the return delivery of goods from
a store to a distribution center (this is the most common case),
from one distribution center to another distribution center,
from one store to another store,
from a distribution center to a store (although this is not very common).
Requirements
For the return delivery types, you have to make settings for the item category determination.
Partner schema must be assigned to the return delivery types.
The relevant goods movement types must be assigned to the schedule line categories (for the returns in Sales). The following schedule line categories are also available in the system:
NR - Replenishment Returns and
NS - Replenishment Cross Company Returns
Activities
Assign the required return delivery type to
purchasing document category F (purchase order),
purchasing document type (NB - standard purchase order, UB - stock transport order),
the supplying plant (the one to which the goods are being returned)
The following return delivery types are available in the system:
NLR - intra-company-code store returns (purchasing document type UB for replenishment and return orders, delivery type NL for the replenishment delivery)
NCR - cross-company-code store returns (purchasing document type NB for replenishment and return orders, delivery type NLCC for the replenishment delivery)
Please maintain the required customizing
Thanks & Regards
Kishore

Post goods issue should be done depending on purchase order acknowledgement

Hi All,
In vl02n when i click postgood issue, it should check whether purchase order acknowldgement field in me21n is filled then post good issuse should be done.it its not filled post good issue should not be done. for this which badi or userexit i need to use and where do i need to write the code.

Hello ,
you can use BADI 'LE_SHP_GOODSMOVEMENT' , this will trigger when you do PGI in VL02N , in that BADI implementation you need to raise/issue Error Message to stop PGI,That Error Should be captured in the Incomplete Log.
for more details , please ref documentation of that BADI.
regards
Prabhu

Issue in ECC 6.0 Regarding Purchase Order

Hi all,
i have an issue with print preview in ECC 6.0.
i CAN SEE PRINT PREVIEW IF I HAVE MEDIUM AS PRINT OUTPUT ,
IF I DON'T HAVE HAVE MEDIUM AS PRINT OUTPUT , I AM GETTING AN ERROR SAYING Error in OPEN_FORM for document
I guess it should be independant of medium right
in my older version it works fine i.e can see print preview even though i don't have print out put ads medium
Did anyone of have faced similar problems
Thanks in advance

in this case u have to check the syntax of ur driver program, 2. have to check the NACE settings for output type and Medium also.
Regards
Peram

Hello, everybody, help me with quota arragement and release Purchase Order

Hello everybody:
        When maintain Quota arrangement today, a warning message poped up saying Quota arrangement for Material X10002 in plant 1855 not active. but X10002 does exist, I can maitnain it with MM02.
         Why this happened? everyone.
         what's more, all purchase order can not be released with me29n , but ok with me28. why is it so ? thank you in advance, everybody. couldn't thank you more.

Hi,
Regarding your 2 nd Query.
ME29N - Indidual Release
Suppose when my PO is subjected to three release code, this transaction gives me an option to release the three levels altogether by the highest level ( ie the three level release will be able to perform the release if R1 and R2 have not released )
ME28 - Collective Release.
This needs to be released by inidviuals using their release code independently thereby the release is possible only with the three levels releases the same.
The names given to transaction codes is a little bit confusing unless until you are clear about the fucntionality.
Regards,
DilliB

Issue During Outbound Delivery for STO Purchase order

Hi,
Delivery Quantity is not picking automatically in VL10B, while creating outbound delivery with STO purchase order with account assignment ''Q'' Project (with WBS element). Stock also available in the supplying plant as shown the below screen shot.
MMBE:
Please do the needful.
Thanks,
Ashok

Hi Pardhu,
Thanks for your response.
We don't have any open reservations and safety stock available for the material. Kindly go through below screen shot for your reference:
Thanks,
Ashok

Issue with sample: SimpleReport

I went through all the steps detailed in the sample report at https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9ddf91ce-0201-0010-3a86-9f4162bd348f#_header1_3
I'm having issues at the final step:
I see no errors in the logs but I do not find the report in the desired location. Following are the paramenter values I provide.....
Implementing Java Class * : com.pilgrimspride.km.reporting.SimpleReport
Image forUI: /etc/public/mimes/images/pictograms/circle_squares.gif
Initial Access (Roles): ContentManager
Initial Path: Content Management/Tools/report.disp.SimpleReport
Is there some something thing wrong with the values.
Is there additional paramenters that needs be configured?
What does the paramenter "Initial Path" stands for?
Any help wld be appreciated!
Best Regards,
Kumar

hi Natarajan,
the initial path indicates the position where that report have to appear..
for ex if u give as: Content Administration/Tools/simple
the report will come under c-admin/tools/inside which resource lock and virus scan are there..so ur report appears in addition to these reports..so as a result three report will appear under tool..
for this u have to specify the role as: content_admin_role
u try worki8ng under this c-amin role it is working for me..
regards,
Vinoth

Account issue with not being eligable to purchase gift cards

All of a sudden I am unable to purchase gift cards on my itunes account.
It gets me to the screen to buy and then I get a message saying this account is not eligable to purchase gift cards at this time.
I have changed my credit card number but that does not help.
I have been able to purchase gift cards in the past.
Anyone got an answer to this?

Contact the iTunes Store Customer Service department using the form on their Support page (select the category and subcategory closest to the issue you're reporting and you'll find either an "Express Lane" button - just follow the instructions to get to the contact form - or an "Email Us" button) and explain your situation to them. If they cannot fix the problem, they perhaps can at least explain it. With all the iTunes Store fraud going around, the iTunes Store may be limiting such purchases for some accounts due to suspected unauthorized access.
Regards.

Wierd issue with Sample Editor...

Hi again! More questions to use this program efficiently without pulling all my hair out... When I'm using the "time and pitch machine" under Factory in Sample Editor, I've run across an issue. I got a sample to loop accordingly Trimming off the rest of the song in the sample, then I Changed the BPM from about 240 to a new destination of 220 just to shake things up. When I did this, I wasn't too happy with the sound afterall, so I simply chose UNDO from the edit menu.....and now, there is an extra piece of the loop that was added to the end of the loop... that I can't get rid of! Undo can't undo? What gives?
Secondly, It has a function to "pre listen" in the menu of the time machine... yet when I hold the mouse down to preview it... It simpy plays back the exact tempo it was originally without any change reflected. The Help file says some audio hardware it will work with... I'm using a MOTU 2408MK3, I figured this could handle a simple task. Anyone have this issue or suggest anything?
- Thanks for all the help guys!

logic need to improve on that, its been like this since it was first introduced
it works well with short samples/loops and it works well with different algorithm
so try all of them
also you can turn your loops into apple loops, it works better sometimes like that
the other choice is to export that loops and import it back again, so that logic can activate the follow the tempo on it
Secondly, It has a function to "pre listen" in the menu of the time machine... yet when I hold the mouse down to preview it... It simply plays back the exact tempo it was originally without any change reflected. The Help file says some audio hardware it will work with... I'm using a MOTU 2408MK3, I figured this could handle a simple task. Anyone have this issue or suggest anything?
that works if the sample is playing whilst you are dragging your mouse to move the blue ball around
stash

Issues with bit rate on Itunes purchases

For some of my purchases I cannot seem to upgrade the bit rate from 128kbs? How do I do this. also, some of my album purchases seem to have disappeared. How do I get them back? regards Edward

I know that Itune sPlus ended but I understood that you could delete your downloaded files and redownload them and they would be at 256k. is that correct?
Edward, Yes, if you subscribe to iTunes Match. Look at this document, and read the section on "Can I upgrade my previously purchased music to iTunes Plus?":
http://support.apple.com/kb/HT1711
iTunes Match costs $24.99 in the USA iTunes Store, probably a bit higher in the UK Store.
I have an album that seems to have disappeared from my purchases on the itunes store. how do I get that back?
Do you mean that it disappeared from your library? If so, and assuming it is still available in the store, you can redownload fresh copies by following the link in my earlier post. This action does not require Match.

I'm having issues with syncing songs I just purchased from iTunes. Please help me?

I just purchased a few new songs from the iTunes store on my macbook pro, but I can't sync them to my iPod touch because whenever I try to, a box comes up that says I need to authorize my computer, which I've done more than once and it doesn't seem to help. This is really starting to aggravate me. Does anybody know what I should do?

CS3 is too old to run on a new Macintosh laptop, sorry. You'll have to purchase CS6 or a Creative Cloud subscription.

Issue related to receipt of OSP purchase order

Hi all,
My query is related to the receipt of Job Order PO (OSP PO).
In some OSP receipt transaction, the JOB order is coming at RECEIVE transaction
but in some cases, it is not coming .
I am checking this job order number using form named : "Receiving Transaction Summary ".
what's a reason behind it ? at what specific case it is happening ?
Due to this problem, we are getting incomplete information in report.
please help me if you have any idea .
regards
sanjay

Like Sandeep said check the job number using the following navigation
PO Summary>>Distributions>>Show Field>>Job Number
In the PO summary form put the required PO/ Item Number. It is good to put part number as there can be multiple PO's associated/ none associated with it due to mistakes during PO creation.

RE: issue with sample watermark apperaring in purchase order

Similar Messages

Maybe you are looking for