Hello, everybody, help me with quota arragement and release Purchase Order
Hello everybody:
When maintain Quota arrangement today, a warning message poped up saying Quota arrangement for Material X10002 in plant 1855 not active. but X10002 does exist, I can maitnain it with MM02.
Why this happened? everyone.
what's more, all purchase order can not be released with me29n , but ok with me28. why is it so ? thank you in advance, everybody. couldn't thank you more.
Hi,
Regarding your 2 nd Query.
ME29N - Indidual Release
Suppose when my PO is subjected to three release code, this transaction gives me an option to release the three levels altogether by the highest level ( ie the three level release will be able to perform the release if R1 and R2 have not released )
ME28 - Collective Release.
This needs to be released by inidviuals using their release code independently thereby the release is possible only with the three levels releases the same.
The names given to transaction codes is a little bit confusing unless until you are clear about the fucntionality.
Regards,
DilliB
Similar Messages
-
Hello, everybody, help me with my smartforms
There are always some exceptions jump out when I called my smartforms from another program. It must because of the way I passed the parameter of a Interanl table because when I deleted it, this smartform ran well.
the following is the simple pragram.
*& Report Z_PRACTICE_GUODD
*& practice how to use smart_form
REPORT Z_PRACTICE_GUODD.
TABLES: EKPO, EKKO.
TYPES: BEGIN OF ITAB,
EBELN LIKE EKPO-EBELN,
MATNR LIKE EKPO-MATNR,
AEDAT LIKE EKKO-AEDAT,
END OF ITAB.
*TYPES ITAB TYPE TABLE OF ITAB_LINE.
DATA: ITAB_TEMP_PRACTICE TYPE ITAB OCCURS 0 with header line.
DATA: P_ITAB TYPE ITAB OCCURS 0 with header line.
DATA: SMARTFORM(30) TYPE C.
DATA: FM_NAME TYPE RS38L_FNAM.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE T1.
SELECT-OPTIONS : S_EBELN FOR EKPO-EBELN no intervals no-extension.
SELECTION-SCREEN END OF BLOCK B1.
INITIALIZATION.
T1 = 'Machine Query Conditions'.
AT SELECTION-SCREEN.
SELECT AEBELN AMATNR B~AEDAT
INTO CORRESPONDING FIELDS OF TABLE ITAB_TEMP_PRACTICE
FROM EKPO as A
INNER JOIN EKKO as B ON AEBELN = BEBELN
WHERE A~EBELN = S_EBELN.
APPEND ITAB_TEMP_PRACTICE.
DATA: LINE TYPE I.
DESCRIBE TABLE ITAB_TEMP_PRACTICE LINES LINE.
DATA : JZRQ TYPE C.
SMARTFORM = 'Z_GUODD_SHEET2'.
IF LINE = 0.
STOP.
ELSE.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = SMARTFORM
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3 .
TABLES
P_ITAB = ITAB_TEMP_PRACTICE
CALL FUNCTION FM_NAME
EXPORTING
P_JZRQ = JZRQ
TABLES:
P_ITAB = ITAB_TEMP_PRACTICE
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
ENDIF.
***********************end of the program*************************************************
In the smartforms, I made the following configuration.
Global definition ---> Types , I added
TYPES: BEGIN OF ITAB_LINE,
EBELN LIKE EKPO-EBELN,
MATNR LIKE EKPO-MATNR,
AEDAT LIKE EKKO-AEDAT,
END OF ITAB_LINE.
TYPES ITAB TYPE TABLE OF ITAB_LINE.
FORM INTERFACE -
> IMPORT , I SPECIFY
1 P_JZRQ type c
2 P_ITAB type ITAB
THE EXCEPTIONS ARE AS FOLLOWING:
one of the parameters needed according to the interface description was not specified. this parameter was "P_ITAB" .
please give me a hand, everybody.. ......cound't thank you more.Hi,
1. Please write the select query at start of selection event.
2. 'SSF_FUNCTION_MODULE_NAME' is used to find the FM module. hence you should not use this module to call the smart form.
goto your smart form and press execute. you will get an FM name. (eg /1BCDWB/SF00000175)
Copy this FM name and goto ur report program and click on pattern and give this name and press ok.
you will get a list of import and export parameter. Now pass the input values to this FM.
Please test it and check if it works.
once its working then, delete the FM name (/1BCDWB/SF00000175) and give the variable name FM_NAME.
Regards,
Niyaz
*reward points if usefull -
Hello, we have both Creative Cloud membership and Creative Cloud for team. Can you help me with the difference and if i need to have both? We have 9 employees that are using it. Just not sure if i'm paying for something i don't need.
Thank youPlease refer to Creative Cloud Help | Creative Cloud / Common Questions
CC is for retail use with 20 GB of storage space, CCT is where number of seats are purchased & assigned by one program admin where each seat gets 100GB of storage space.
You can not have both the CC & team in one account as it will only provide you added storage space of 120 GB but you can activate the CC any of them or either of them twice as CC is based on Adobe ID.
Regards
Rajshree -
can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!
There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it. -
Please help me with this questions "if I purchased items through mac or windows is it possible to re-download those purchases on Apple TV though iCloud"
It depends on what country you're in and whether or not they're still available in the iTunes Store. Some purchased movies and all rentals won't be available.
(108225) -
i am with a university and i purchased the adobe photoshop elements for a faculty member of mine, how can he download it when it is in my name but he is the one needing it?
There is nothing to prevent him from downloading and installing the trial version (Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe). At the point all you need to do is provide him with the serial number so that he can activate it. If the intent is that he be the owner of the software then you might want to see about transfering the license...
Transfer an Adobe product license -
While executing TCode F13 and F13E, purchase order number is not appearing.how it should be displayed into tcode f.13, what are the requirements need to display into tcode f.13, please any one help me, i am facing this problem in production server
Hi Nattu,
Please check it will show the PO no under Purchasing doc field
Check which layout you are applied.
its should be
SAP&F124
Without Specification of Crcy
Regd,
Khan. -
ECO number with revision level and release key
Hi All,
I have a requirement from client with regards to Engineering change manangement.
The scenario is that we are maintaining BOM for materials.Whenever a change is required for BOM a ECO number is created with release key.
Once the BOM is changed against ECO number is created a workflow is triggered for approval.
Then it goes through a series of approvals in the heirarchy.In each level the reviewer will propose a new value for the changed line item.
All these changes have to be maintained in record.At the end the final approver reviews all the proposed changes and release the ECO number with the appropriate change.
I had a thought of implementing the above scenario with ECO with revision level and release key.
But I am unable to replicate the scenario due the fact that,when I select the ECO number with release key,I cannot select the material in Object type.
Its disabled.Its available when I create a ECR with release key.
Please suggest a way to create ECO number with release key and revision level for BOM.
Regards
RichieHi,
You create the revision level against the material (via MM02, basic data tab)) not against the serial. The serial number, by definition, would be unique to the combination of material and revision.
Regards -
my songs wouldnt play on my ipod so i deleted the songs on the ipod and went to the purchased section in itunes to recover like i did with another song and my purchase history i blank, how can i get them back?
Maybe you have multiple accounts that's why your purchase history is empty. You can try checking for possible Apple IDs that's existing for you or you can ask for assistance from support.
http://www.apple.com/support/itunes/ -
Terms of Payment for Local and Import Purchase Order
Hello Experts,
I am SAP FICO Consultant, I am given a task of maintaining payment terms for local and import purchase order, I would highly appreciate your help in this regard. I know I can maintain payment terms via OBB8 but I am not sure that how to cover the following scenarios.
1. 100% Advance
2. 50% Advance, Balance in 07 Days (usually balance immediate with delivery is accepted but it is paid in 07 days for the record)
3. 25% Advance, Balance in 07 Days
4. 10% Advance, Balance in 07 Days
5. 30 Days Credit
6. 15 Days Credit
7. 07 Days Credit
IMPORTS
1. 100% Irrevocable LC in advance
2. 100% TT in Advance
3. 50% TT in advance & 50% before shipment.
Looking forward to hear from you.
Regards
Muhammad Yousuf AliHi
<b>All the Local as well as the R/3 data gets stored in the SRM tables ->
BBP_PAYTERM (Terms of Payment, Backend-Dependent)
BBP_PAYTERM_TEXT ( Texts for Terms of Payment, Backend-Dependent)
BBP_TQ02B ( QM System)
BBP_TQ02U (Description QM system)
Also refer to Transaction SLG1 for the log created in this case.</b>
Hope this will help.
Please reward suitable points.
Regards
- Atul -
Make to Order and Individual Purchase Order ( MTO & IPO)
Hello Gurus,
1. Can anyone let me know what is Make to order (MTO)and Individual purchase
order (IPO) and the Differences between both?
2. What is the purpose of MTO and IPO and where it is used.
I would be thankful if anyone can provide me the meaning of both.
Prashant V.T (PVT)Hi Prashant,
MTO : Make to Order means the Production of the Material starts after getting the sales Order.
Means once the Sales Order raised for any particuler customer then based on that order production / procurement takes place, and the stock what ever produced will be restricted for that Order only. The Stock cant be used for any other orders.
where as IPO is different.
IPO : Individual Purchase Order is like Third Party Sales but with a difference. In Third Party Sales, after getting the Sales Order a Purchase Order is raised to vendor and vendor will supply directly to the customer, and the Ordering compnay will raise the Invoice to the customer once the customer received the stock from vendor.
IPO is similer but the difference is vendor will send the stock to the company instead of direclty sending to the customer. And the actual compnay will take the stock and do the delivery / shipping/ invoice to the customer.
MM T.codes MIGO, MIRO plays crucial role in these type of scenarios.
Hope this gives you some idea.
REWARD IF HELPFUL.
Regards,
Praveen -
Please send me fm regarding to get purchase order and change purchase order
Hi,
Please send me fm regarding to get purchase order and change purchase order .
Regards,
Gurprit BhatiaHi,
Function module to get the purchase order details:
BAPI_PO_GETDETAIL.
data: po_items type table of bapiekpo with header line.
parameters: p_ebeln type ekko-ebeln.
call function 'BAPI_PO_GETDETAIL'
exporting
purchaseorder = p_ebeln
ITEMS = 'X'
ACCOUNT_ASSIGNMENT = ' '
SCHEDULES = ' '
HISTORY = ' '
ITEM_TEXTS = ' '
HEADER_TEXTS = ' '
SERVICES = ' '
CONFIRMATIONS = ' '
SERVICE_TEXTS = ' '
EXTENSIONS = ' '
IMPORTING
PO_HEADER =
PO_ADDRESS =
tables
PO_HEADER_TEXTS =
po_items = po_items
PO_ITEM_ACCOUNT_ASSIGNMENT =
PO_ITEM_SCHEDULES =
PO_ITEM_CONFIRMATIONS =
PO_ITEM_TEXTS =
PO_ITEM_HISTORY =
PO_ITEM_HISTORY_TOTALS =
PO_ITEM_LIMITS =
PO_ITEM_CONTRACT_LIMITS =
PO_ITEM_SERVICES =
PO_ITEM_SRV_ACCASS_VALUES =
RETURN =
PO_SERVICES_TEXTS =
EXTENSIONOUT =
check sy-subrc = 0.
loop at po_items.
write:/ po_items.
endloop.
Check this program too:
RFFMFG_INV_CANC_ALL for BAPi_PO_GET_DETAIL.
Hope it helps you.
Regards,
Anjali -
How to Identify open Stock Transport Orders and their Purchase Order No?
I am looking for the most efficient way, with the best SAP tables, to read , to get STOs and their Purchase Order numbers.
Also, what would be the best way to get its related Sales Order Number.
Thank-You.STO's : EKPO-PSTYP = 7
SO : VBFA-VBTYP_N = 'V', AND VBFA-VBTYP_V = 'C', -
Third Party and Individual Purchase Order
<b>Can anybody please send me the steps to configure the Return Process for both Third Party and Indvidual Purchase Orders.</b>
dear sunil
THIRD PARTY SCENARIO
in third-party order processing, your company does not deliver the items requested by a customer. Instead, you pass the order along to a third-party vendor who then ships the goods directly to the customer and bills you. A sales order may consist partly or wholly of third-party items. Occasionally, you may need to let a vendor deliver items you would normally deliver yourself.
Process Flow
the processing of third-party orders is controlled via material types. Material types define whether a material is produced only internally can be ordered only from third-party vendors, or whether both are possible. For example, a material that is defined as a trading good can only be ordered from a third-party vendor. However, if you manufacture your own finished products, you may also want, from time to time, to be able to order the same type of product from other vendors.
Processing Third-Party Orders in Sales
Third-party items can be created automatically by the system, depending on how your system is set. However, you can also change a standard item to a third-party item during sales processing manually.
Automatic third-party order processing:-
if a material is always delivered from one or more third-party vendors, you can specify in the material master that the material is a third-party item. During subsequent sales order processing, the system automatically determines the appropriate item category for a third-party item: TAS. To specify a material as a third-party item, enter BANS in the Item category group field in the Sales 2 screen of the material master record.
Manual third-party order processing
In the case of a material that you normally deliver yourself but occasionally need to order from a third-party vendor, you can overwrite the item category during sales order processing. For a material that you normally deliver yourself, you specify the item category group NORM in the material master.
If, as an exception, you use a third-party material, change the entry TAN to TAS in the ItCa field when processing the sales document. The item is then processed as third-party item.
If address data for the ship-to party is changed in the sales order in third-party business transactions, the changed data will automatically be passed on to purchase requisition and also to the purchase order ,if one already exists. In the purchase order, you can display the address data for the ship-to party in the attributes for the item.
You can only change the address data for the ship-to party in the sales order for third-party business transactions, and not in the purchase order.
Processing Third-Party Orders in Purchasing
when you save a sales order that contains one or more third-party items, the system automatically creates a purchase requisition in Purchasing. Each third-party item in a sales order automatically generates a corresponding purchase requisition item. During creation of the requisition, the system automatically determines a vendor for each requisition item. If a sales order item has more than one schedule line, the system creates a purchase requisition item for each schedule line.
Purchase orders are created from purchase requisitions in the usual way. For more information about creating purchase orders, see the Purchasing documentation. During creation of the purchase order, the system automatically copies the delivery address of your customer from the corresponding sales order. In a sales order, you can enter purchase order texts for each third-party item. When you create the corresponding purchase order, the texts are automatically copied into the purchase order. The number of the purchase order appears in the document flow information of the sales order.
All changes made in the purchase order are automatically made in the sales order as well. For example, if the vendor confirms quantities and delivery dates different from those you request and enters them in the purchase order, the revised data is automatically copied into the sales order
you process third-party items by creating a normal sales order. In overview for the order, you can then overwrite the default item category (TAN in the standard system) with the special item category for third-party items: TAS
Billing Third-Party Orders
If relevance for billing indicator for the item category has been set to B (relevant for order-related billing on the basis of the order quantity) in Customizing, the system includes the order in the billing due list immediately. If, however, the indicator has been set to F (relevant to order-related billing on the basis of the invoice quantity), the system does not include the order in the billing due list until an invoice from the vendor has been received and processed by the purchasing department. In the standard system, item category TAS (third-party order processing) has been given billing-relevance indicator F.
In the first case, the third-party order is considered to be completely billed only when the invoiced quantity equals the order quantity of the sales order item. In the second case, each time a vendor invoice is received, a customer invoice is created for the quantity in the vendor invoice and the order is considered to be fully invoiced until the next vendor invoice is received.
If you have activated billing-relevance indicator F for item categories in Customizing, billing can refer to the goods receipt quantity instead of the incoming invoice quantity.
You can control whether the invoice receipt quantity or the quantity of goods received is relevant for billing in Customizing for copying control for billing at item level.
FOR YOUR PROCESS Individual Purchase Orders WELL GIVE THE RIGHT SOLUTION
Individual purchase orders are used when your customer orders goods from you that are not in stock and must be ordered from one or more external vendors.
Process Flow
During sales order entry, the system automatically creates a purchase requisition item. The purchasing department creates a purchase order based on the requisition and the vendor ships the goods directly to you (unlike third party order processing, where the vendor ships directly to your customer). You then ship the goods to your customer. While the goods are part of your inventory, you manage them as part of the sales order stock. Sales order stock consists of stock that is assigned to specific sales orders and cannot be used for other purposes.
Process Flow for 3rd Party Sales
Customize the third party sales in summary:
Prerequisites for 3rd party sales,
Purchasing org,
purchasing group,
assign the Purchase org to company code
assign Purchase org to plant,
should not maintain the stock in material, it should be trading goods,
1. Create Vendor XK01
2. Create Material Material Type as "Trading Goods". Item category group as "BANS".
3. Assign Item Category TAS to Order type that you are going to use.
4. A sale order is created and when saved a PR is generated at the background
5. With reference to SO a PO is created (ME21N). The company raises PO to the vendor.
6. Vendor delivers the goods and raises bill to company. MM receives the invoice MIRO
7. Goods receipt MIGO
8. Goods issue
9. The item cat TAS or Schedule line cat CS is not relevant for delivery which is evident from the config and, therefore, there is no delivery process attached in the whole process of Third party sales.
10. Billing *--
SD - 3rd party sales order Create Sales Order
VA01
Order Type
Sales org, distr chnl, div
Enter
Sold to
PO #
Material
Quantity
Enter
Save
SD - 3rd party sales order View the PR that is created with a third party sales order
VA01
Order Number
Goto Item Overview
Item ->Schedule Item
SD - 3rd party sales order View the PR that is created
ME52N
Key in the PR number
Save
SD - 3rd party sales order Assign the PR to the vendor and create PO
ME57
Key in the PR number
Toggle the "Assigned Purchase Requisition"
Execute
Check the box next to the material
Assign Automatically button
Click on "Assignments" button
Click on "Process assignment"
The "Process Assignment Create PO" box , enter
Drag the PR and drop in the shopping basket
Save
SD - 3rd party sales order Receive Goods
MIGO_GR
PO Number
DN Number
Batch tab , click on classification
Serial Numbers tab
Date of Production
Flag Item OK
Check, just in case
Post
Save
SD - 3rd party sales order Create Invoice
MIRO
Invoice Date
Look for the PO , state the vendor and the Material
Check the box
Click on "Copy"
Purchase Order Number (bottom half of the screen)
Amount
State the baseline date
Simulate & Post
Invoice Number
*Invoice blocked due to date variance
SD - 3rd party sales order Create a delivery order
VL01N
In the order screen , go to the menu Sales Document , select "Deliver"
Go to "picking" tab
State the qty and save
SD - 3rd party sales order Create a billing document
VF01
Ensure that the delivery document is correct in the
Enter
Go to edit -> Log
Save
rewards pls
siva -
Table for Purchase Order and Non Purchase order history
Hi,
Could you please share me the table name for getting the Purchase order history and Non purchase order history because this is a client requirent.
I have gone through this tables but not getting exact data i.e. EKPO,EKKO,EKNE...
please share with me the exact Table name to get all the Purchase order history and not purchase order history..
Thanks in advanceHi Mallikarjun,
Where did you find the non po info?
Thanks,
Neha
Maybe you are looking for
-
Null values returned when using request.getParameters(
I have a html form which allows the user to choose options and select a file to upload. When I use method=Post I get null values returned. When I use method=Get I get my parameter values fine.. but I get an error. "Posted content type isn't multipart
-
ABAP Objects with Workflows / Classes and Instances
Hello, I am currently designing a workflow using an ABAP-Objects. So far I have been been able to get my Workflow to run with my class, but I have a couple of problems: - I am using the Function 'SAP_WAPI_START_WORKFLOW' to start other subflows, whic
-
I can not open raw files in my ps elements 8 from my Canon EOS 60D
Anyone out there that can help?
-
IFileAttachmentPerms not working as a FeatureLockDown
Okay, Assuming everyone has heard about the possible exploit in Adobe Reader where malicious code could be ran if you have "Allow opening of non-PDF file attachements with external applications" enabled (Under: Edit > Preferences > Trust Manager > "P
-
I bought the student cs6 suite at George Brown College in Toronto and can't get it authorized
How can I get what I paid for from Adobe?