Re: Need help with escalated complaint - seeking return / refund
I have purchased laptop a month back. Within 2 days of purchase simply by opening the flap, its plastic cracks. I have been chasing laptop lenovo for 1 month now. No replacement is happening for laptop. I have sent so many reminders. No one is doing anything. I can be contacted at +65- xxxxxxxx since I am currently in Singapore.
Regards,
Ankur
Moderator Note; private information edited to prevent abuse
Reference number is DOA (Ref no. 7006013709) LE140410005
Regards,
Ankur
Similar Messages
-
Need help with MAX function to return values
I am trying to create a report to return slow moving inventory data. One of the requests is that it return only the latest date that an item transacted upon. One sheet will show the last receipt date for a part, another will show the last time a part was issued or shipped on a sales order.
The hiccup is that it is returning every single last time that an item was received, and every single last issuance of the material (on the second sheet) of items on hand.
Could someone help me to define the max value function? As listed below, and many variations, the sheet comes up with no data or corrupt dates.
MAX(Transaction Date MAX) OVER(PARTITION BY Material Transactions.Item ORDER BY Material Transactions.Item )
Still returns both the following when in reality I just want the one with the most recent date (April 2010).
100034 BNDSCE-105 - QUALITY BEARINGS OR EQUIVILANT A400M AB01D.. $0.00 WIP component issue 11-Sep-2009 -3
100034 BNDSCE-105 - QUALITY BEARINGS OR EQUIVILANT A400M AD01D.. $0.00 WIP component issue 13-Apr-2010 -16
Thank you for your assistance.
BeckaHi Becka
It does look correct. When I look at your data I can see 2 different items:
100034 BNDSCE-105 - QUALITY BEARINGS OR EQUIVILANT A400M AB01D.. $0.00 WIP component issue 11-Sep-2009 -3
100034 BNDSCE-105 - QUALITY BEARINGS OR EQUIVILANT A400M AD01D.. $0.00 WIP component issue 13-Apr-2010 -16
One is AB01D and the other being AD01D. Is this expected?
To get the right date you might want to PARTITION BY the BNDSCE-105 which might be the Item Number?
If you can get your calculation to return the correct date then you next need to put in a new condition where the Transaction Date = MAX Transaction Date
One part of the function that I would question is the use of MAX in both parts like this: MAX(Transaction Date MAX). You might be better just using MAX(Transaction Date) OVER ......
Does this help?
Best wishes
Michael -
Need Help With File Matching Records
I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
try
output1 = new Formatter("trans.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
output2 = new Formatter("oldmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
// object to be written to file
TransactionRecord record1 = new TransactionRecord();
Scanner input1 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0) and amount.","? ");
while (input1.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record1.setAccount(input1.nextInt()); // read account number
record1.setAmount(input1.nextDouble()); // read amount
if (record1.getAccount() > 0)
// write new record
output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input1.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
"and amount.","? ");
} // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
// object to be written to file
AccountRecord record2 = new AccountRecord();
Scanner input2 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0), first name, last name and balance.","? ");
while (input2.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record2.setAccount(input2.nextInt()); // read account number
record2.setFirstName(input2.next()); // read first name
record2.setLastName(input2.next()); // read last name
record2.setBalance(input2.nextDouble()); // read balance
if (record2.getAccount() > 0)
// write new record
output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
record2.getLastName(), record2.getBalance());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input2.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0),",
"first name, last name and balance.","? ");
} // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
if (output1 != null)
output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
if (output2 != null)
output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
// main method begins program execution
public static void main( String args[] )
CreateTextFile application = new CreateTextFile();
application.openTransFile();
application.addTransactionRecords();
application.closeTransFile();
application.openOldMastFile();
application.addAccountRecords();
application.closeOldMastFile();
} // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
setAccount(acct);
setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
amount = amt;
} // end method setAmount
// get amount
public double getAmount()
return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
setAccount(acct);
setFirstName(first);
setLastName(last);
setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
lastName = last;
} // end method setLastName
// get last name
public String getLastName()
return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
balance = bal;
} // end method setBalance
// get balance
public double getBalance()
return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
try
inTransaction = new Scanner(new File("trans.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
inOldMaster = new Scanner(new File("oldmast.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
try
outNewMaster = new Formatter("newmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
try
theLog = new Formatter("log.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
TransactionRecord transaction = new TransactionRecord();
AccountRecord account = new AccountRecord();
try // read records from file using Scanner object
System.out.println("Start file matching.");
while (inTransaction.hasNext() && inOldMaster.hasNext())
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
account.setAccount(inOldMaster.nextInt()); // read account number
account.setFirstName(inOldMaster.next()); // read first name
account.setLastName(inOldMaster.next()); // read last name
account.setBalance(inOldMaster.nextDouble()); // read balance
if (transaction.getAccount() == account.getAccount())
while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
account.combine(transaction);
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
else if (transaction.getAccount() != account.getAccount())
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
} // end while
System.out.println("Finish file matching.");
} // end try
catch (NoSuchElementException elementException)
System.err.println("File improperly formed.");
inTransaction.close();
inOldMaster.close();
System.exit(1);
} // end catch
catch (IllegalStateException stateException)
System.err.println("Error reading from file.");
System.exit(1);
} // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
if (inTransaction != null)
inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
if (inOldMaster != null)
inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
if (outNewMaster != null)
outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
if (theLog != null)
theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
// main method begins program execution
public static void main( String args[] )
FileMatch application = new FileMatch();
application.openTransFile();
application.openOldMastFile();
application.openNewMastFile();
application.openLogFile();
application.updateRecords();
application.closeLogFile();
application.closeNewMastFile();
application.closeOldMastFile();
application.closeTransFile();
} // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number Name Balance
100 Alan Jones 348.17
300 Mary Smith 27.19
500 Sam Sharp 0.00
700 Suzy Green -14.22Sample data for transaction file:
Transaction file Transaction
Account Number Amount
100 27.14
300 62.11
300 83.89
400 100.56
700 80.78
700 1.53
900 82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do. -
I need help with Creating Key Pairs
Hello,
I need help with Creating Key Pairs, I generate key pais with aba provider, but the keys generated are not base 64.
the class is :
import java.io.*;
import java.math.BigInteger;
import java.security.*;
import java.security.spec.*;
import java.security.interfaces.*;
import javax.crypto.*;
import javax.crypto.spec.*;
import au.net.aba.crypto.provider.ABAProvider;
class CreateKeyPairs {
private static KeyPair keyPair;
private static KeyPairGenerator pairGenerator;
private static PrivateKey privateKey;
private static PublicKey publicKey;
public static void main(String[] args) throws Exception {
if (args.length != 2) {
System.out.println("Usage: java CreateKeyParis public_key_file_name privete_key_file_name");
return;
createKeys();
saveKey(args[0],publicKey);
saveKey(args[1],privateKey);
private static void createKeys() throws Exception {
Security.addProvider(new ABAProvider());
pairGenerator = KeyPairGenerator.getInstance("RSA","ABA");
pairGenerator.initialize(1024, new SecureRandom());
keyPair = pairGenerator.generateKeyPair();
privateKey = keyPair.getPrivate();
publicKey = keyPair.getPublic();
private synchronized static void saveKey(String filename,PrivateKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream(new FileOutputStream(filename));
out.writeObject(key);
out.close();
private synchronized static void saveKey(String filename,PublicKey key) throws Exception {
ObjectOutputStream out= new ObjectOutputStream( new FileOutputStream(filename));
out.writeObject(key);
out.close();
the public key is:
�� sr com.sun.rsajca.JSA_RSAPublicKeyrC��� xr com.sun.rsajca.JS_PublicKey~5< ~��% L thePublicKeyt Lcom/sun/rsasign/p;xpsr com.sun.rsasign.anm����9�[ [ at [B[ bq ~ xr com.sun.rsasign.p��(!g�� L at Ljava/lang/String;[ bt [Ljava/lang/String;xr com.sun.rsasign.c�"dyU�| xpt Javaur [Ljava.lang.String;��V��{G xp q ~ ur [B���T� xp ��ccR}o���[!#I����lo������
����^"`8�|���Z>������&
d ����"B��
^5���a����jw9�����D���D�)�*3/h��7�|��I�d�$�4f�8_�|���yuq ~
How i can generated the key pairs in base 64 or binary????
Thanxs for help me
Luis Navarro Nu�ez
Santiago.
Chile.
South America.I don't use ABA but BouncyCastle
this could help you :
try
java.security.Security.addProvider(new org.bouncycastle.jce.provider.BouncyCastleProvider());
java.security.KeyPairGenerator kg = java.security.KeyPairGenerator.getInstance("RSA","BC");
java.security.KeyPair kp = kg.generateKeyPair();
java.security.Key pub = kp.getPublic();
java.security.Key pri = kp.getPrivate();
System.out.println("pub: " + pub);
System.out.println("pri: " + pri);
byte[] pub_e = pub.getEncoded();
byte[] pri_e = pri.getEncoded();
java.io.PrintWriter o;
java.io.DataInputStream i;
java.io.File f;
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pub64"));
o.println(new sun.misc.BASE64Encoder().encode(pub_e));
o.close();
o = new java.io.PrintWriter(new java.io.FileOutputStream("d:/pri64"));
o.println(new sun.misc.BASE64Encoder().encode(pri_e));
o.close();
java.io.BufferedReader br = new java.io.BufferedReader(new java.io.FileReader("d:/pub64"));
StringBuffer keyBase64 = new StringBuffer();
String line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] pubBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
br = new java.io.BufferedReader(new java.io.FileReader("d:/pri64"));
keyBase64 = new StringBuffer();
line = br.readLine ();
while(line != null)
keyBase64.append (line);
line = br.readLine ();
byte [] priBytes = new sun.misc.BASE64Decoder().decodeBuffer(keyBase64.toString ());
java.security.KeyFactory kf = java.security.KeyFactory.getInstance("RSA","BC");
java.security.Key pubKey = kf.generatePublic(new java.security.spec.X509EncodedKeySpec(pubBytes));
System.out.println("pub: " + pubKey);
java.security.Key priKey = kf.generatePrivate(new java.security.spec.PKCS8EncodedKeySpec(priBytes));
System.out.println("pri: " + priKey);
catch(Exception e)
e.printStackTrace ();
} -
I need help with this script please ASAP
So I need this to work properly, but when ran and the correct answer is chosen the app quits but when the wrong answer is chosen the app goes on to the next question. I need help with this ASAP, it is due tommorow. Thank you so much for the help if you can.
The script (Sorry if it's a bit long):
#------------Startup-------------
display dialog "Social Studies Exchange Trviva Game by Justin Parzik" buttons {"Take the Quiz", "Cyaaaa"} default button 1
set Lolz to (button returned of the result)
if Lolz is "Cyaaaa" then
killapp()
else if Lolz is "Take the Quiz" then
do shell script "say -v samantha Ok starting in 3…2…1…GO!"
#------------Question 1-----------
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 2--------
display dialog "Most children were taught
to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------------Question 3---------
display dialog "In the 1730s and 1740s, a religious movement called the_______swept through the colonies." buttons {"Glorius Revolution", "Great Awakening", "The Enlightenment"}
set A3 to (button returned of the result)
if A3 is "Great Awakening" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-----------Question 4--------
display dialog "_______ was
a famous American Enlightenment figure." buttons {"Ben Franklin", "George Washington", "Jesus"}
set A4 to (button returned of the result)
if A4 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 5-------
display dialog "______ ownership gave colonists political rights as well as prosperity." buttons {"Land", "Dog", "Slave"}
set A5 to (button returned of the result)
if A5 is "Land" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 6--------
display dialog "The first step toward guaranteeing these rights came in 1215. That
year, a group of English noblemen forced King John to accept the…" buttons {"Declaration of Independence", "Magna Carta", "Constitution"}
set A6 to (button returned of the result)
if A6 is "Magna Carta" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#----------Question 7--------
display dialog "England's cheif lawmaking body was" buttons {"the Senate", "Parliament", "King George"}
set A7 to (button returned of the result)
if A7 is "Parliament" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 8-----
display dialog "Pariliament decided to overthrow _______ for not respecting their rights" buttons {"King James II", "King George", "King Elizabeth"}
set A8 to (button returned of the result)
if A8 is "King James II" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 9------
display dialog "Parliament named ___ and ___ as England's new monarchs in something called ____." buttons {"William/Mary/Glorius Revolution", "Adam/Eve/Great Awakening", "Johhny/Mr.Laphalm/Burning of the hand ceremony"}
set A9 to (button returned of the result)
if A9 is "William/Mary/Glorius Revolution" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 10-----
display dialog "After accepting the throne William and Mary agreed in 1689 to uphold the English Bill of _____." buttons {"Money", "Colonies", "Rights"}
set A10 to (button returned of the result)
if A10 is "Rights" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 11------
display dialog "By the late 1600s French explorers had claimed the ___ River Valey" buttons {"Mississippi", "Ohio", "Hudson"}
set A11 to (button returned of the result)
if A11 is "Ohio" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------Question 12---------
display dialog "______ was sent to ask the French to leave 'English Land'." buttons {"Johhny Tremain", "George Washington", "Paul Revere"}
set A12 to (button returned of the result)
if A12 is "George Washington" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#---------Question 13-------
display dialog "_____ proposed the Albany Plan of Union" buttons {"George Washingon", "Ben Franklin", "John Hancock"}
set A13 to (button returned of the result)
if A13 is "Ben Franklin" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#--------Question 14------
display dialog "The __________ declared that England owned all of North America east of the Mississippi" buttons {"Proclomation of England", "Treaty of Paris", "Pontiac Treaty"}
set A14 to (button returned of the result)
if A14 is "" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#-------Question 15-------
display dialog "Braddock was sent to New England so he could ______" buttons {"Command an attack against French", "Scalp the French", "Kill the colonists"}
set A15 to (button returned of the result)
if A15 is "Command an attack against French" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
#------TheLolQuestion-----
display dialog "____ is the name of the teacher who runs this class." buttons {"Mr.White", "Mr.John", "Paul Revere"} default button 1
set LOOL to (button returned of the result)
if LOOL is "Mr.White" then
do shell script "say -v samantha Congratulations…you…have…common…sense"
else
do shell script "say -v alex Do…you…have…eyes?"
#------END------
display dialog "I hope you enjoyed the quiz!" buttons {"I did!", "It was horrible"}
set endmenu to (button returned of the result)
if endmenu is "I did!" then
do shell script "say -v samantha Your awesome"
else
do shell script "say -v alex Go outside and run a lap"
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end if
end ifUse code such as:
display dialog "Around age 11, many boys left their fathers to become…" buttons {"Scholars", "Warriors", "Apprentices"}
set A1 to (button returned of the result)
if A1 is "Apprentices" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
#----------Question 2--------
display dialog "Most children were taught to read so that they could understand the…" buttons {"Music of Mozart", "Bible", "art of cooking"}
set A2 to (button returned of the result)
if A2 is "Bible" then
do shell script "say -v samantha Correct Answer"
else
do shell script "say -v samantha Wrong Answer"
return
end if
(90444) -
Need help with home work see what you got
1. The MEMBERS table has the phone number broken into three fields:
CountryCode - e,g., '1' for the United States
AreaCode - e.g., three digits for the United States
Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
Any or all of the fields may be missing (null) or blank or contain only spaces.
Write a T-SQL statement to concatenate the three fields into a complete phone number
with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
If no Phone is present, return a blank string.
If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
For this purpose, each row contains:
PersonID - unique member identifier
Campaign - name of war/conflict
Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
E.g., PersonID Campaigns
12345678 Global War on Terror, Iraq, Afghanistan
3. The MEMBER_STATISTICS table contains one row per post.
For this purpose, each row contains the post's:
Division - a way of grouping posts by their member size
Department - the state in which the post is located
PostNumber - unique post identifier
Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
Rank them by highest to lowest reinstated count.
Return their Division, Rank, Department, PostNumber, ReinstatedI got 3 home work questions think i have the first two need help with the last one please.
Kinda stuck on #3 hard I can see data not sure witch to sum or count?
1. The MEMBERS table has the phone number broken into three fields:
CountryCode - e,g., '1' for the United States
AreaCode - e.g., three digits for the United States
Phone - e.g., 7 digits, with or without a dash between the first three digits (Exchange) and last four digits (Line)
Any or all of the fields may be missing (null) or blank or contain only spaces.
Write a T-SQL statement to concatenate the three fields into a complete phone number
with the format: CountryCode(AreaCode)Exchange-Line, e.g., 1(816)123-4567
If no Phone is present, return a blank string.
If no area code is present, return only the Phone number. Do not return an empty pair of parentheses or the CountryCode.
ANSWER******************
Notes: created a funtion to format the phone
Then used the this function in a select to concatenate Phone
CREATE FUNCTION dbo.FORMATPHONE (@CountryCode int, @AreCode int, @Phone VARCHAR(14))
RETURNS VARCHAR(14)
AS BEGIN
DECLARE @ReturnPhone VARCHAR(14)
DECLARE @NewPhone VARCHAR(14)
-- Note case sets newphone to null if phone null or '' also to see if phone has '-' in it if not inserts into newphone
case
when @Phone is null or @Phone = ''
Then SET @NewPhone = Null
when @Phone = substring(@Phone,4,1)='-'
Then SET @NewPhone = @Phone
else
SET @NewPhone = substring(@Phone,1,3)+'-'+ substring(@Phone,4,4)
End
case
when @NewPhone is null then SET @ReturnPhone = @NewPhone
elese case
when @AreCode is null or @AreCode = '' then SET @ReturnPhone = @NewPhone
else
SET @ReturnPhone = @CountryCode + '(' + @AreCode + ')' + @NewPhone
END
END
RETURN @ReturnPhone
END
select dbo.FORMATPHONE(CountryCode,AreCode,Phone)
from MEMBERS
2. The PERSON_CAMPAIGN table contains a row for each war/conflict the member served in. A member may have served in multiple conflicts
For this purpose, each row contains:
PersonID - unique member identifier
Campaign - name of war/conflict
Write a T-SQL statement to return one row per member with all campaigns concatenated into a single field and separated by commas
E.g., PersonID Campaigns
12345678 Global War on Terror, Iraq, Afghanistan
ANSWER******************
SELECT PersonID,
STUFF(( SELECT ',' + Campaign AS [text()]
FROM PERSON_CAMPAIGN
WHERE (PersonID = Results.ID)
FOR XML PATH('')
), 1, 1, '' )
AS Campaigns
FROM PERSON_CAMPAIGN Results
3. The MEMBER_STATISTICS table contains one row per post.
For this purpose, each row contains the post's:
Division - a way of grouping posts by their member size
Department - the state in which the post is located
PostNumber - unique post identifier
Reinstated - count of members whose annual subscription had lapsed for at least two years but who have now subscribed for the current year
Write a T-SQL statement to determine the top ten posts in each division based on the number of reinstated members, with a minimum of 50 reinstated members.
Rank them by highest to lowest reinstated count.
Return their Division, Rank, Department, PostNumber, Reinstated -
Need help with calculator project for an assignment...
Hi all, I please need help with my calculator project that I have to do for an assignment.
Here is the project's specifications that I need to do"
"""Create a console calculator applicaion that:
* Takes one command line argument: your name and surname. When the
program starts, display the date and time with a welcome message for the
user.
* Display all the available options to the user. Your calculator must include
the arithmetic operations as well as at least five scientific operations of the
Math class.
-Your program must also have the ability to round a number and
truncate it.
-When you multiply by 2, you should not use the '*' operator to perform the
operation.
-Your program must also be able to reverse the sign of a number.
* Include sufficient error checking in your program to ensure that the user
only enters valid input. Make use of the String; Character, and other
wrapper classes to help you.
* Your program must be able to do conversions between decimal, octal and
hex numbers.
* Make use of a menu. You should give the user the option to end the
program when entering a certain option.
* When the program exits, display a message for the user, stating the
current time, and calculate and display how long the user used your
program.
* Make use of helper classes where possible.
* Use the SDK to run your program."""
When the program starts, it asks the user for his/her name and surname. I got the program to ask the user again and again for his/her name and surname
when he/she doesn't insert anything or just press 'enter', but if the user enters a number for the name and surname part, the program continues.
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??
Here is the programs code that I've written so far:
{code}
import java.io.*;
import java.util.*;
import java.text.*;
public class Project {
private static String nameSurname = "";
private static String num1 = null;
private static String num2 = null;
private static String choice1 = null;
private static double answer = 0;
private static String more;
public double Add() {
answer = (Double.parseDouble(num1) + Double.parseDouble(num2));
return answer;
public double Subtract() {
answer = (Double.parseDouble(num1) - Double.parseDouble(num2));
return answer;
public double Multiply() {
answer = (Double.parseDouble(num1) * Double.parseDouble(num2));
return answer;
public double Divide() {
answer = (Double.parseDouble(num1) / Double.parseDouble(num2));
return answer;
public double Modulus() {
answer = (Double.parseDouble(num1) % Double.parseDouble(num2));
return answer;
public double maximumValue() {
answer = (Math.max(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double minimumValue() {
answer = (Math.min(Double.parseDouble(num1), Double.parseDouble(num2)));
return answer;
public double absoluteNumber1() {
answer = (Math.abs(Double.parseDouble(num1)));
return answer;
public double absoluteNumber2() {
answer = (Math.abs(Double.parseDouble(num2)));
return answer;
public double Squareroot1() {
answer = (Math.sqrt(Double.parseDouble(num1)));
return answer;
public double Squareroot2() {
answer = (Math.sqrt(Double.parseDouble(num2)));
return answer;
public static String octalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String octal1 = Integer.toOctalString(iNum1);
return octal1;
public static String octalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String octal2 = Integer.toOctalString(iNum2);
return octal2;
public static String hexadecimalEquivalent1() {
int iNum1 = Integer.parseInt(num1);
String hex1 = Integer.toHexString(iNum1);
return hex1;
public static String hexadecimalEquivalent2() {
int iNum2 = Integer.parseInt(num2);
String hex2 = Integer.toHexString(iNum2);
return hex2;
public double Round1() {
answer = Math.round(Double.parseDouble(num1));
return answer;
public double Round2() {
answer = Math.round(Double.parseDouble(num2));
return answer;
SimpleDateFormat format1 = new SimpleDateFormat("EEEE, dd MMMM yyyy");
Date now = new Date();
SimpleDateFormat format2 = new SimpleDateFormat("hh:mm a");
static Date timeIn = new Date();
public static long programRuntime() {
Date timeInD = timeIn;
long timeOutD = System.currentTimeMillis();
long msec = timeOutD - timeInD.getTime();
float timeHours = msec / 1000;
return (long) timeHours;
DecimalFormat decimals = new DecimalFormat("#0.00");
public String insertNameAndSurname() throws IOException{
boolean inputCorrect = false;
while (inputCorrect == false) {
while (nameSurname == null || nameSurname.length() == 0) {
for (int i = 0; i < nameSurname.length(); i++) {
if ((nameSurname.charAt(i) > 'a') && (nameSurname.charAt(i) < 'Z')){
inputCorrect = true;
else{
inputCorrect = false;
break;
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your name and surname: ");
nameSurname = inStream.readLine();
inputCorrect = true;
}catch (IOException ex) {
System.out.println("You did not enter your name and surname, " + nameSurname + " is not a name, please enter your name and surname :");
inputCorrect = false;
System.out.println("\nA warm welcome " + nameSurname + " ,todays date is: " + format1.format(now));
System.out.println("and the time is now exactly " + format2.format(timeIn) + ".");
return nameSurname;
public String inputNumber1() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter a number you want to do a calculation with and hit <ENTER>: ");
num1 = br.readLine();
double number1 = Double.parseDouble(num1);
System.out.println("\nThe number you have entered is: " + number1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("\nYou did not enter a valid number: " + "\""+ num1 + "\" is not a number!!");
inputCorrect = false;
return num1;
public String calculatorChoice() throws IOException {
System.out.println("Please select an option of what you would like to do with this number from the menu below and hit <ENTER>: ");
System.out.println("\n*********************************************");
System.out.println("---------------------------------------------");
System.out.println("Please select an option from the list below: ");
System.out.println("---------------------------------------------");
System.out.println("1 - Add");
System.out.println("2 - Subtract");
System.out.println("3 - Multiply");
System.out.println("4 - Divide (remainder included)");
System.out.println("5 - Maximum and minimum value of two numbers");
System.out.println("6 - Squareroot");
System.out.println("7 - Absolute value of numbers");
System.out.println("8 - Octal and Hexadecimal equivalent of numbers");
System.out.println("9 - Round numbers");
System.out.println("0 - Exit program");
System.out.println("**********************************************");
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader inStream = new BufferedReader (new InputStreamReader(System.in));
System.out.print("Please enter your option and hit <ENTER>: ");
choice1 = inStream.readLine();
int c1 = Integer.parseInt(choice1);
System.out.println("\nYou have entered choice number: " + c1);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid choice number: " + "\""+ choice1 + "\" is not in the list!!");
inputCorrect = false;
return choice1;
public String inputNumber2() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br2 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nPlease enter another number you want to do the calculation with and hit <ENTER>: ");
num2 = br2.readLine();
double n2 = Double.parseDouble(num2);
System.out.println("\nThe second number you have entered is: " + n2);
System.out.println("\nYour numbers are: " + num1 + " and " + num2);
inputCorrect = true;
} catch (NumberFormatException nfe) {
System.out.println("You did not enter a valid number: " + "\""+ num2 + "\" is not a number!!");
inputCorrect = false;
return num2;
public int Calculator() {
int choice2 = (int) Double.parseDouble(choice1);
switch (choice2) {
case 1 :
Add();
System.out.print("The answer of " + num1 + " + " + num2 + " is: " + decimals.format(answer));
break;
case 2 :
Subtract();
System.out.print("The answer of " + num1 + " - " + num2 + " is: " + decimals.format(answer));
break;
case 3 :
Multiply();
System.out.print("The answer of " + num1 + " * " + num2 + " is: " + decimals.format(answer));
break;
case 4 :
Divide();
System.out.print("The answer of " + num1 + " / " + num2 + " is: " + decimals.format(answer));
Modulus();
System.out.print(" and the remainder is " + decimals.format(answer));
break;
case 5 :
maximumValue();
System.out.println("The maximum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
minimumValue();
System.out.println("The minimum number between the numbers " + num1 + " and " + num2 + " is: " + decimals.format(answer));
break;
case 6 :
Squareroot1();
System.out.println("The squareroot of value " + num1 + " is: " + decimals.format(answer));
Squareroot2();
System.out.println("The squareroot of value " + num2 + " is: " + decimals.format(answer));
break;
case 7 :
absoluteNumber1();
System.out.println("The absolute number of " + num1 + " is: " + decimals.format(answer));
absoluteNumber2();
System.out.println("The absolute number of " + num2 + " is: " + decimals.format(answer));
break;
case 8 :
octalEquivalent1();
System.out.println("The octal equivalent of " + num1 + " is: " + octalEquivalent1());
octalEquivalent2();
System.out.println("The octal equivalent of " + num2 + " is: " + octalEquivalent2());
hexadecimalEquivalent1();
System.out.println("\nThe hexadecimal equivalent of " + num1 + " is: " + hexadecimalEquivalent1());
hexadecimalEquivalent2();
System.out.println("The hexadecimal equivalent of " + num2 + " is: " + hexadecimalEquivalent2());
break;
case 9 :
Round1();
System.out.println("The rounded number of " + num1 + " is: " + decimals.format(answer));
Round2();
System.out.println("The rounded number of " + num2 + " is: " + decimals.format(answer));
break;
case 0 :
if (choice2 == 0) {
System.exit(1);
break;
return choice2;
public String anotherCalculation() throws IOException {
boolean inputCorrect = false;
while (inputCorrect == false) {
try {
BufferedReader br3 = new BufferedReader (new InputStreamReader(System.in));
System.out.print("\nWould you like to do another calculation? Y/N ");
more = br3.readLine();
String s1 = "y";
String s2 = "Y";
if (more.equals(s1) || more.equals(s2)) {
inputCorrect = true;
while (inputCorrect = true){
inputNumber1();
System.out.println("");
calculatorChoice();
System.out.println("");
inputNumber2();
System.out.println("");
Calculator();
System.out.println("");
anotherCalculation();
System.out.println("");
inputCorrect = true;
} else {
System.out.println("\n" + nameSurname + " thank you for using this program, you have used this program for: " + decimals.format(programRuntime()) + " seconds");
System.out.println("the program will now exit, Goodbye.");
System.exit(0);
} catch (IOException ex){
System.out.println("You did not enter a valid answer: " + "\""+ more + "\" is not in the list!!");
inputCorrect = false;
return more;
public static void main(String[] args) throws IOException {
Project p1 = new Project();
p1.insertNameAndSurname();
System.out.println("");
p1.inputNumber1();
System.out.println("");
p1.calculatorChoice();
System.out.println("");
p1.inputNumber2();
System.out.println("");
p1.Calculator();
System.out.println("");
p1.anotherCalculation();
System.out.println("");
{code}
*Can you please run my code for yourself and have a look at how this program is constructed*
*and give me ANY feedback on how I can better this code(program) or if I've done anything wrong from your point of view.*
Your help will be much appreciated.
Thanks in advanceSmirre wrote:
Now my question is this: How can I restrict the user to only enter 'letters' (and spaces of course) but allow NO numbers for his/her surname??You cannot restrict the user. It is a sad fact in programming that the worst bug always sits in front of the Computer.
What you could do is checking the input string for numbers. If it contains numbers, just reprompt for the Name.
AND you might want to ask yourself why the heck a calculator needs to know the users Name. -
Need help with my usecase based on transient ViewObject
I am using 11.1.1.4.0 Jdev version. I need help with my usecase.Been trying it for 2 days but couldn't figure out the issue.
I have a transientVO . In this VO Rows will be populated programmatically. CountryId is an attribute of this VO. I have created a viewAccessor "CountriesVA" from Country VO of HR schema.
I have a LOV for the countryId which is based on this VA ,getting countries from CountryTable.
This is the model part which works fine.
Before the page load i have called a method to create a row for this transientVO.Once the row is created i can see the SOC in my page which i have created as below.
Now i want to insert a row in the transientVO if user selects a country and restrict duplicate entry . (As One row is already created 1st time there will be no rows created.after that rows will be inserted)
The issue is :: Suppose there are 2 countries. A & B .When user does the following actions :
Insert A . Done //as 1st entry
Insert B . Done //as 1st time entry
Insert A . duplicate not inserted
Insert B . getting inserted // the bug.
<af:selectOneChoice value="#{bindings.CountryId.inputValue}"
label="#{bindings.CountryId.label}"
required="#{bindings.CountryId.hints.mandatory}"
shortDesc="#{bindings.CountryId.hints.tooltip}" id="soc1"
immediate="true" autoSubmit="true"
valueChangeListener="#{pageFlowScope.managedBean.countryIdVC}">
public void countryIdVC(ValueChangeEvent valueChangeEvent) {
// Add event code here...
String oldValue=null;
setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
//access the underlying RowSetIterator
RowSetIterator rsi = dciter.getRowSetIterator();
boolean duplicate=true;
if(oldValue!=null){
rsi.getCurrentRow().setAttribute("CountryId", oldValue);
// Row row= rsi.findByKey(new Key(new Object[] { newValue}), 1)[0];
Key key =new Key(new Object[] { newValue});
Row row=rsi.getRow(key);
if(row==null){
System.err.println(duplicate);
duplicate=false;
}else{
rsi.setCurrentRow(row);
if(!duplicate){
//get handle to the last row
Row lastRow = rsi.last();
//obtain the index of the last row
int lastRowIndex = rsi.getRangeIndexOf(lastRow);
//create a new row
Row newRow = rsi.createRow();
newRow.setAttribute("CountryId", newValue);
//initialize the row
newRow.setNewRowState(Row.STATUS_INITIALIZED);
//add row to last index + 1 so it becomes last in the range set
rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
//make row the current row so it is displayed correctly
rsi.setCurrentRow(newRow);I read the reply from Andrejus Baranovskis and thought of studying and implementing that in my useCase.Well it worked . I implemented the same Logic but rowIteration was done in AppModule.
Con-Fusion, Bugs, Facts &amp; Workarounds: Iterating through View Object RowIterator Bug.(NOT ADF BUG, Development B…
http://docs.oracle.com/cd/E15523_01/web.1111/b31974/bcservices.htm#sm0206
9.7.6 What You May Need to Know About Programmatic Row Set Iteration
The problem is solved ,the above links helped me solve the problem.
what i did is i have created a method in appmodule to iterate rows and all the method y operation bindings and my logic works fine ....
MY Advice to all Adf developers ,though i am not an expert but i can assure you to follow the above process for rowIteration.If you use the iterator binding in the manage bean to navigate the rows u'll face issues which are unexpected.
In AppModule :::::
public boolean createRow(String oldValue,String newValue){
System.err.println(oldValue+""+newValue);
ViewObjectImpl vo=getViewObj1();
boolean duplicate=false;
if(oldValue!=null){
RowSetIterator iter = vo.createRowSetIterator(null);
System.err.println("iterating rows ");
while (iter.hasNext()) {
Row r = iter.next();
System.err.println(iter.getRangeIndexOf(r)+" row is "+r.getAttribute("CountryId"));
if(r.getAttribute("CountryId").toString().equals(newValue)){
duplicate=true;
break;
// Do something with the current row.
// close secondary row set iterator
iter.closeRowSetIterator();
return duplicate;
In ManageBean :::::
public void countryIdVC(ValueChangeEvent valueChangeEvent) {
// Add event code here...
String oldValue=null;
System.err.println("Old Value"+valueChangeEvent.getOldValue());
setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getOldValue());
if(evaluateEL("#{bindings.CountryId.attributeValue}")!=null)
oldValue =evaluateEL("#{bindings.CountryId.attributeValue}").toString();
setEL("#{bindings.CountryId.inputValue}", valueChangeEvent.getNewValue());
String newValue=evaluateEL("#{bindings.CountryId.attributeValue}").toString();
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
//access the name of the iterator the table is bound to. Its "allDepartmentsIterator"
//in this sample
DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("ViewObj1Iterator");
//access the underlying RowSetIterator
RowSetIterator rsi = dciter.getRowSetIterator();
if(oldValue!=null){
rsi.getCurrentRow().setAttribute("CountryId", oldValue);
OperationBinding operation = bindings.getOperationBinding("createRow");
operation.getParamsMap().put("oldValue", oldValue);
operation.getParamsMap().put("newValue", newValue);
if(!(Boolean)operation.execute()){
//get handle to the last row
Row lastRow = rsi.last();
//obtain the index of the last row
int lastRowIndex = rsi.getRangeIndexOf(lastRow);
//create a new row
Row newRow = rsi.createRow();
newRow.setAttribute("CountryId", newValue);
//initialize the row
newRow.setNewRowState(Row.STATUS_INITIALIZED);
//add row to last index + 1 so it becomes last in the range set
System.err.println("Inserting row at index "+lastRowIndex+1);
rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
//make row the current row so it is displayed correctly
rsi.setCurrentRow(newRow);
else{
System.err.println("Data found So not inserting,only setting current Row");
Key key =new Key(new Object[] { newValue});
rsi.setCurrentRow(rsi.getRow(key)); -
Need help with my graphic calculator!!!
Hello everybody!! I need help with my little program I made.... The problem is that I am unable to use to calculate but it is possible to compile the code!! What should I do?? Thanks in advance.
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
class Aritmetik extends JFrame implements ActionListener{
private JLabel l1 = new JLabel("Tal1: ", JLabel.LEFT);
private JLabel l2 = new JLabel("Tal2: ", JLabel.LEFT);
private JLabel l3 = new JLabel("Resultat",JLabel.LEFT);
private JLabel l4 = new JLabel(" ", JLabel.RIGHT);
private JTextField t1 = new JTextField(" ",10);
private JTextField t2 = new JTextField(" ",10);
private JButton b1 = new JButton("+");
private JButton b2 = new JButton("-");
private JButton b3 = new JButton("*");
private JButton b4 = new JButton("/");
public Aritmetik(){
Container v = getContentPane();
v.setLayout(new GridLayout(5,2));
v.add(l1);
v.add(t1);
v.add(l2);
v.add(t2);
v.add(b1);
v.add(b2);
v.add(b3);
v.add(b4);
v.add(l3);
v.add(l4);
b1.addActionListener(this);
b2.addActionListener(this);
b3.addActionListener(this);
b4.addActionListener(this);
pack();
setVisible(true);
setDefaultCloseOperation(EXIT_ON_CLOSE);
public void actionPerformed(ActionEvent e){
int tal1 = Integer.parseInt(t1.getText());
int tal2 = Integer.parseInt(t2.getText());
if(e.getSource() == b1){
if(t1.getText().equals("") || t2.getText().equals(""))
JOptionPane.showMessageDialog(null, "Mata in tal!");
else{
l3.setText("Resultat ");
l4.setText(" " + (tal1+tal2));
else if(e.getSource() == b2){
int sub = tal1-tal2;
l4.setText(" " + (sub));
else if(e.getSource() == b3){
int multi = tal1*tal2;
l4.setText(" " + (multi));
else if(e.getSource() == b4){
int div = tal1/tal2;
l4.setText(" " + (div));
public static void main(String[] arg){
Aritmetik A =new Aritmetik();Here is your problem:
public void actionPerformed(ActionEvent e){
int tal1 = Integer.parseInt(t1.getText().trim()); // add the trim()
int tal2 = Integer.parseInt(t2.getText().trim()); // add the trim()
if(e.getSource() == b1){
if(t1.getText().equals("") || t2.getText().equals(""))
JOptionPane.showMessageDialog(null, "Mata in tal!");
else{
l3.setText("Resultat ");
l4.setText(" " + (tal1+tal2));
}... Better ...
public void actionPerformed(ActionEvent e) throws NumberFormatException {
String tala = t1.getText().trim();
String talb = t2.getText().trim();
if ( tala == null || "".equals(tala) || talb == null || "".equals(talb) ) {
JOptionPane.showMessageDialog(null, "Mata in tal!");
return();
int tal1 = Integer.parseInt(tala);
int tal2 = Integer.parseInt(talb);
if(e.getSource() == b1){
l3.setText("Resultat ");
l4.setText(" " + (tal1+tal2));
else if(e.getSource() == b2){
int sub = tal1-tal2;
l4.setText(" " + (sub));
else if(e.getSource() == b3){
int multi = tal1*tal2;
l4.setText(" " + (multi));
else if(e.getSource() == b4){
int div = tal1/tal2;
l4.setText(" " + (div));
}Message was edited by:
abillconsl -
Need help with my addressbook program
hi,
i need help with my program here. this one should works as:
- saves user input into a txt file
- displays name of the saved person on the jlist whenever i run the program
- displays info about the person when clicked via textboxes given by reading the txt file where the user inputs are
- should scroll when the list exceeds the listbox
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
import javax.swing.JList;
import java.awt.event.ActionListener;
import java.io.*;
import javax.swing.event.*;
import java.io.FilterInputStream;
public class AddressList extends JPanel implements ActionListener
JTextField txt1 = new JTextField();
JTextField txt2 = new JTextField();
JTextField txt3 = new JTextField();
DefaultListModel mdl = new DefaultListModel();
JList list = new JList();
JScrollPane listScroller = new JScrollPane(list);
ListSelectionModel listSelectionModel;
File fob = new File("Address3.txt");
String name;
char[] chars;
public void ListDisplay()
try
RandomAccessFile rand = new RandomAccessFile(fob,"rw");
BufferedReader br = new BufferedReader(new FileReader("Address3.txt"));
if(fob.exists())
while((name = rand.readLine()) != null)
chars = name.toCharArray();
if(chars[0] == '*')
mdl.addElement(name);
list.setModel(mdl);
if(chars[0] == '#')
continue;
else
System.out.println("No such file..");
catch(IOException a)
System.out.println(a.getMessage());
public AddressList()
this.setLayout(null);
listSelectionModel = list.getSelectionModel();
listSelectionModel.addListSelectionListener(new ListInfo());
list.setBounds(10,40,330,270);
listScroller.setBounds(320,40,20,100);
add(list);
add(listScroller);
JLabel lbl4 = new JLabel("Name: ");
lbl4.setBounds(400,10,80,30);
add(lbl4);
JLabel lbl5 = new JLabel("Cellphone #: ");
lbl5.setBounds(400,50,80,30);
add(lbl5);
JLabel lbl6 = new JLabel("Address: ");
lbl6.setBounds(400,90,80,30);
add(lbl6);
JLabel lbl7 = new JLabel("List ");
lbl7.setBounds(10,10,100,30);
add(lbl7);
txt1.setBounds(480,10,200,30);
add(txt1);
txt2.setBounds(480,50,200,30);
add(txt2);
txt3.setBounds(480,90,200,30);
add(txt3);
JButton btn1 = new JButton("Add");
btn1.setBounds(480,130,100,30);
btn1.addActionListener(this);
btn1.setActionCommand("Add");
add(btn1);
JButton btn2 = new JButton("Save");
btn2.setBounds(480,170,100,30);
btn2.addActionListener(this);
btn2.setActionCommand("Save");
add(btn2);
JButton btn3 = new JButton("Cancel");
btn3.setBounds(480,210,100,30);
btn3.addActionListener(this);
btn3.setActionCommand("Cancel");
add(btn3);
JButton btn4 = new JButton("Close");
btn4.setBounds(480,250,100,30);
btn4.addActionListener(this);
btn4.setActionCommand("Close");
add(btn4);
public static void main(String[]args)
JFrame frm = new JFrame("Address List");
AddressList panel = new AddressList();
frm.getContentPane().add(panel,"Center");
frm.setSize(700,350);
frm.setVisible(true);
panel.ListDisplay();
public void actionPerformed(ActionEvent e)
String cmd;
cmd = e.getActionCommand();
if(cmd.equals("Add"))
txt1.setText("");
txt2.setText("");
txt3.setText("");
else if(cmd.equals("Save"))
mdl.addElement(txt1.getText());
list.setModel(mdl);
try
RandomAccessFile rand = new RandomAccessFile(fob,"rw");
BufferedReader br = new BufferedReader(new InputStreamReader(System.in));
LineNumberReader line = new LineNumberReader(br);
if(fob.exists())
rand.seek(fob.length());
rand.writeBytes("* " + txt1.getText());
rand.writeBytes("\r\n" + "# " + txt2.getText());
rand.writeBytes("\r\n" + "# " + txt3.getText() + "\r\n");
else
System.out.println("No such file..");
txt1.setText("");
txt2.setText("");
txt3.setText("");
catch(IOException a)
System.out.println(a.getMessage());
else if(cmd.equals("Cancel"))
txt1.setText("");
txt2.setText("");
txt3.setText("");
else if(cmd.equals("Close"))
System.exit(0);
class ListInfo implements ListSelectionListener
public void valueChanged(ListSelectionEvent e)
ListSelectionModel lsm = (ListSelectionModel)e.getSource();
int minIndex = lsm.getMinSelectionIndex();
int maxIndex = lsm.getMaxSelectionIndex();
try //*this one should display the info of the person whenever i click the person's name at the list box via textbox.. but i cant seem to get it right since it always display the info of the first person inputed.. i tried to get the program to display them whenever it reads lines with * on them....
File fob = new File("Address3.txt");
RandomAccessFile rand = new RandomAccessFile(fob,"rw");
BufferedReader br = new BufferedReader(new FileReader("Address3.txt"));
LineNumberReader line = new LineNumberReader(br);
if(fob.exists())
for(int i = minIndex; i<=maxIndex; i++)
if(lsm.isSelectedIndex(i))
while((name = rand.readLine()) != null)
chars = name.toCharArray();
if(chars[0] == '#')
continue;
if(chars[0] == '*')
txt1.setText(rand.readLine());
txt2.setText(rand.readLine());
txt3.setText(rand.readLine());
else
System.out.println("No such file..");
catch(IOException a)
System.out.println(a.getMessage());
}the only problem now is about how it should display the right info about the person whenever i click its name on the list.. something about file reading or something, i just cant figure it out.
and also about how to make it scroll once it exceeds the list.. i cant make it work, maybe something about wrong declaration..
thanks in advance..
Edited by: syder on Mar 14, 2008 2:26 AMLike said before, do one thing at a time. At startup, something like:
//put all the content in a list
ArrayList<String> lines = new ArrayList<String>();
while(String line=rand.readLine()!=null) {
lines.add(line);
}If you follow the good advice to create a class to encapsulate the entries, you could populate a list of such entries like this:
static final int ENTRY_SIZE = 3;//you have 3 fields now, better to have a constant if that changes
ArrayList<Entry> entries = new ArrayList<Entry>();
for(int i=0; i<lines.size(); i+=ENTRY_SIZE) {
Entry entry = new Entry(lines.get(i), lines.get(i+1), lines.get(i+2);
entries.add(newEntry);
}You could also do both of the above in one run, but I think you will understand better what's happening if you do one thing at a time.
If you don't want to put the entries in an encapsulating class, you can still access this without looping:
int listStartIdx = <desired_entry_index>*ENTRY_SIZE;
String att1 = lines.get(listStartIdx).substring(1);
String att2 = lines.get(listStartIdx+1).substring(1);
String att3 = lines.get(listStartIdx+2).substring(1); -
Need help with a Asus 27" monitor with webcam problem.
Need help with a Asus 27" monitor I bought. Model VK278Q. The issue is that the webcam will not work properly. Various applications can see the webcam, but I just get a black box. From what I have read, the issue seems to be that there are no official drivers for the webcam.
I thought someone in this community might be able to offer some help before I return the monitor. I read somewhere that it may be possible to tweat the OS so that the iSight software will work for the monitor webcam.
ThxNAVARRO360 wrote: ... there is no simple fix? ...
Eureka! You now understand the situation.
Even the old standard for Mac OS X drivers for non-compatible cams, macam, says that it has no driver for ASUS (20") monitor camera.
The macam status shows:
not working (no documentation)
With no working driver for the 20" ASUS, it is not surprising that there is none for the 27" either. There may be good reason that ASUS won't (or can't) offer either the technical documentation or a Mac driver for their monitor's inbuilt webcam. However, they apparently do not publish that information.
If ASUS Technical Support cannot provide the driver you need for OS X, the ASUS will continue to be a ridonculous (sic) monitor whose webcam will not work with your OS X Mac. The only other simple fix I can think of is to use the ASUS with a different PC that is compatible with this monitor and its inbuilt webcam. What you do is certainly your choice.
Message was edited by: EZ Jim
Mac OSX 10.7.3 -
Hi,
I need help with the following query. I want the balance (bal) with the latest exchange rate available.
Sample table & data
with
FX_RATE as
select 11 as id_date, 1 as id_curr, 47 as EXCH_rate from dual union
select 12, 1, 48 from dual union
select 13, 2, 54 from dual union
select 14, 2, 55 from dual union
select 15, 3, 56 from dual union
select 15, 2, 49 from dual),
TBL_NM as
select 13 as p_date, 2 as p_curr, 200 as bal from dual union
select 14, 2, 200 from dual union
select 15, 2, 200 from dual union
select 16, 2, 200 from dual union
select 17, 2, 200 from dual union
select 11, 5, 100 from dual
select p_date, p_curr, bal * nvl(exch_rate,1) from TBL_NM T LEFT OUTER JOIN FX_RATE F1 on (id_curr = p_curr and F1.id_date = T.p_Date)In the above query for p_date 16 & 17 and p_curr 2 it returns just balance multiplied by exchange rate 1"default". But i want the balance to have data as per latest exchange rate which is of exchange rate 15.
I tried this but returns error ORA-01799: a column may not be outer joined to a subquery ..
with
FX_RATE as
select 11 as id_date, 1 as id_curr, 47 as EXCH_rate from dual union
select 12, 1, 48 from dual union
select 13, 2, 54 from dual union
select 14, 2, 55 from dual union
select 15, 3, 56 from dual union
select 15, 2, 49 from dual),
TBL_NM as
select 13 as p_date, 2 as p_curr, 200 as bal from dual union
select 14, 2, 200 from dual union
select 15, 2, 200 from dual union
select 16, 2, 200 from dual union
select 17, 2, 200 from dual union
select 11, 5, 100 from dual
select p_date, p_curr, bal * nvl(exch_rate,1) from TBL_NM T LEFT OUTER JOIN FX_RATE F1
on (id_curr = p_curr and F1.id_date = (select max(F2.id_date) from FX_RATE F2 where F2.id_curr = T.p_curr and F2.id_Date <= T.p_date))Please advice on how i can achieve this ..The entire query wud be like this .. I've to incorporate in here
CREATE MATERIALIZED VIEW MV_DUMMY
BUILD IMMEDIATE
REFRESH FORCE ON DEMAND
AS
SELECT T.ID_TSACTION_RELEASED
BAL.ID_CONTRACT_BALANCE AS ID_CONTRACT_BALANCE,
T.N_REFERENCE_NUMBER
T.INSTRUMENT_N_REFERENCE
T.ITEM_NUMBER
T.EXTERNAL_SYSTEM_ID
T.SEQUENCE_NUMBER
T.ID_RELEASED_DATE
ROUND(BAL.LC_AVAILABLE_BALANCE * NVL(FX1.EXCHANGE_RATE,1) / NVL(FX2.EXCHANGE_RATE,1) , 4)
BAL.LIABILITY_BALANCE
BAL.LIABILITY_BALANCE * NVL(FX3.EXCHANGE_RATE,1)
BAL.LIABILITY_CHANGE_USD
BAL.MEMO_LIABILITY_BALANCE
BAL.MEMO_LIABILITY_BALANCE * NVL(FX3.EXCHANGE_RATE,1)
BAL.MEMO_LIABILITY_CHANGE_USD
BAL.ORIGINAL_FACE_AMOUNT
decode(T.TENOR_CODE,'Time','T','Sight','S','Split Sight Time','SST','Split Multiple Time','SMT',T.TENOR_CODE)
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN T.ID_LIABILITY_CIF
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN T.Id_Beneficiary
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN T.ID_Applicant
END PRIMARY_CUSTOMER_ID,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN plbcif.EXTERNAL_SYSTEM_ID
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN PBCIF.EXTERNAL_SYSTEM_ID
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN pappcif.EXTERNAL_SYSTEM_ID
END PRIMARY_CUSTOMER_EXT_SYS_ID,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN plbcif.CIF_NAME
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN PBCIF.CIF_NAME
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN pappcif.CIF_NAME
END PRIMARY_CUSTOMER_NAME,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN plbbac.BAC
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN pbbac.BAC
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN pappbac.BAC
END PRIMARY_CUST_BAC_CODE,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN nvl(plbmg.MARKET,'NOT APPLICABLE')
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN nvl(pbmg.MARKET,'NOT APPLICABLE')
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN nvl(pappmg.MARKET,'NOT APPLICABLE')
END PRIMARY_CUST_MARKET,
CASE
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ILC','IB','AIR','STG','NLC','NP')
THEN nvl(plbmg.SUB_MARKET,'NOT APPLICABLE')
WHEN GTSPROD.PRODUCT_CATEGORY IN ('ELC','EB','XLC','XP','EC','LN','SCF-AR')
THEN nvl(pbmg.SUB_MARKET,'NOT APPLICABLE')
WHEN GTSPROD.PRODUCT_CATEGORY IN ('TLC','IC','OA','SCF-AP')
THEN nvl(pappmg.SUB_MARKET,'NOT APPLICABLE')
END PRIMARY_CUST_SUB_MARKET
FROM F_TSACTION_RELEASED T
LEFT OUTER JOIN D_BAC_CODE BAC
ON (T.BAC_CODE_LIABILITY = BAC.BAC_CODE)
LEFT OUTER JOIN REF_BAC_SORT_CODE REF_BAC
ON (T.BAC_CODE_LIABILITY = REF_BAC.BAC)
LEFT OUTER JOIN F_CONTRACT_BALANCE BAL
ON (T.ID_TSACTION_RELEASED = BAL.ID_TSACTION_RELEASED)
LEFT OUTER JOIN D_MARKET_SEGMENT MG
ON (T.ID_MARKET_SEGMENT = MG.ID_MARKET_SEGMENT)
LEFT OUTER JOIN D_DATE DT
ON (DT.ID_DATE = T.ID_RELEASED_DATE)
LEFT OUTER JOIN D_DATE DB
ON (DB.ID_DATE = BAL.ID_RELEASED_DATE)
LEFT OUTER JOIN D_PROCESSING_UNIT PU
ON (PU.ID_PROCESSING_UNIT = T.ID_PROCESSING_UNIT)
LEFT OUTER JOIN D_BIR_PRODUCT BIRPROD
ON (BIRPROD.ID_BIR_PRODUCT=T.ID_BIR_PRODUCT)
LEFT OUTER JOIN D_GTS_PRODUCT_TYPE GTSPROD
ON (GTSPROD.ID_GTS_PRODUCT_TYPE= T.ID_GTS_PRODUCT_TYPE)
LEFT OUTER JOIN D_GTS_TSACTION_TYPE GTST
ON (GTST.ID_GTS_TSACTION_TYPE = T.ID_GTS_TSACTION_TYPE)
LEFT OUTER JOIN D_CURRENCY CCYT
ON (CCYT.ID_CURRENCY = T.ID_TSACTION_CURRENCY)
LEFT OUTER JOIN d_cif lcif
ON (lcif.id_cif = T.id_liability_cif)
LEFT OUTER JOIN d_cif lbcif
ON (lbcif.id_cif = bal.id_liability_cif)
LEFT OUTER JOIN d_cif bcif
ON (bcif.id_cif = T.id_BENEFICIARY)
LEFT OUTER JOIN d_cif icif
ON (icif.id_cif = T.id_ISSUING_BANK)
LEFT OUTER JOIN d_cif acif
ON (acif.id_cif = T.id_ADVISING_BANK)
LEFT OUTER JOIN d_cif appcif
ON (appcif.id_cif = T.id_applicant)
LEFT OUTER JOIN d_state astate
ON (astate.id_state = acif.id_state)
LEFT OUTER JOIN d_state bstate
ON (bstate.id_state = bcif.id_state)
LEFT OUTER JOIN d_state lstate
ON (lstate.id_state = lcif.id_state)
LEFT OUTER JOIN d_state lbstate
ON (lbstate.id_state = lbcif.id_state)
LEFT OUTER JOIN d_state istate
ON (istate.id_state = icif.id_state)
LEFT OUTER JOIN d_state appstate
ON (appstate.id_state = appcif.id_state)
LEFT OUTER JOIN D_TSACTION_SOURCE TSrc
ON (T.ID_TSACTION_SOURCE = TSrc.ID_TSACTION_SOURCE)
LEFT OUTER JOIN D_COUNTRY LCTRY
ON (LCTRY.ID_COUNTRY = lcif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY LBCTRY
ON (LBCTRY.ID_COUNTRY = lbcif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY BCTRY
ON (BCTRY.ID_COUNTRY = bcif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY ICTRY
ON (ICTRY.ID_COUNTRY = icif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY ACTRY
ON (ACTRY.ID_COUNTRY = acif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY APPCTRY
ON (APPCTRY.ID_COUNTRY = appcif.ID_COUNTRY)
LEFT OUTER JOIN D_COUNTRY PCTRY
ON (PCTRY.ID_COUNTRY = T.ID_PRESENTER_COUNTRY)
LEFT OUTER JOIN D_LOCATION LOC
ON (LOC.ID_LOCATION = T.ID_PROCESSING_LOCATION)
LEFT OUTER JOIN D_CURRENCY BCCYT
ON (BCCYT.ID_CURRENCY = BAL.ID_LIABILITY_CURRENCY)
LEFT OUTER JOIN D_CURRENCY BALCYT
ON (BALCYT.ID_CURRENCY = BAL.ID_BALANCE_CURRENCY)
LEFT OUTER JOIN d_liability_type li
ON (li.id_liability_type = BAL.id_liability_type)
LEFT OUTER JOIN d_cif plbcif
ON (plbcif.id_cif = T.id_liability_cif)
LEFT OUTER JOIN REF_BAC_SORT_CODE plbbac
ON (plbcif.bac_code=plbbac.bac)
LEFT OUTER JOIN D_MARKET_SEGMENT plbmg
ON (plbbac.SORT_CODE=plbmg.MARKET_SEGMENT)
LEFT OUTER JOIN d_cif pbcif
ON (pbcif.id_cif = T.id_BENEFICIARY)
LEFT OUTER JOIN REF_BAC_SORT_CODE pbbac
ON (pbcif.bac_code=pbbac.bac)
LEFT OUTER JOIN D_MARKET_SEGMENT pbmg
ON (pbbac.SORT_CODE=pbmg.MARKET_SEGMENT)
LEFT OUTER JOIN d_cif pappcif
ON (pappcif.id_cif = T.id_applicant)
LEFT OUTER JOIN REF_BAC_SORT_CODE pappbac
ON (pappcif.bac_code=pappbac.bac)
LEFT OUTER JOIN D_MARKET_SEGMENT pappmg
ON (pappbac.SORT_CODE=pappmg.MARKET_SEGMENT)
LEFT OUTER JOIN D_CURRENCY LOCALCYT
ON (LOCALCYT.alpha_code = PU.local_ccy)
LEFT OUTER JOIN D_BRANCH Branch
ON (T.ID_BRANCH = Branch.ID_BRANCH )
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX1
ON (BAL.ID_BALANCE_CURRENCY = FX1.ID_CURRENCY and FX1.ID_DATE = (select max(FX11.ID_DATE) from F_USD_FX_RATE_HISTORY FX11 where BAL.ID_BALANCE_CURRENCY = FX11.ID_CURRENCY and FX11.ID_DATE <= BAL.id_released_date))
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX2
ON (LOCALCYT.ID_CURRENCY = FX2.ID_CURRENCY and FX2.ID_DATE = (select max(FX22.ID_DATE) from F_USD_FX_RATE_HISTORY FX22 where LOCALCYT.ID_CURRENCY = FX22.ID_CURRENCY and FX22.ID_DATE <= BAL.id_released_date))
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX3
ON (BAL.ID_LIABILITY_CURRENCY = FX3.ID_CURRENCY and FX3.ID_DATE = (select max(FX33.ID_DATE) from F_USD_FX_RATE_HISTORY FX33 where BAL.ID_LIABILITY_CURRENCY = FX33.ID_CURRENCY and FX33.ID_DATE <= BAL.id_released_date))Note the lines
ROUND(BAL.MN_AVAILABLE_BALANCE * NVL(FX1.EXCHANGE_RATE,1) / NVL(FX2.EXCHANGE_RATE,1) , 4)
BAL.LIABILITY_BALANCE * NVL(FX3.EXCHANGE_RATE,1)
BAL.MEMO_LIABILITY_BALANCE * NVL(FX3.EXCHANGE_RATE,1)
And
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX1
ON (BAL.ID_BALANCE_CURRENCY = FX1.ID_CURRENCY and FX1.ID_DATE = (select max(FX11.ID_DATE) from F_USD_FX_RATE_HISTORY FX11 where BAL.ID_BALANCE_CURRENCY = FX11.ID_CURRENCY and FX11.ID_DATE <= BAL.id_released_date))
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX2
ON (LOCAMNYT.ID_CURRENCY = FX2.ID_CURRENCY and FX2.ID_DATE = (select max(FX22.ID_DATE) from F_USD_FX_RATE_HISTORY FX22 where LOCAMNYT.ID_CURRENCY = FX22.ID_CURRENCY and FX22.ID_DATE <= BAL.id_released_date))
LEFT OUTER JOIN F_USD_FX_RATE_HISTORY FX3
ON (BAL.ID_LIABILITY_CURRENCY = FX3.ID_CURRENCY and FX3.ID_DATE = (select max(FX33.ID_DATE) from F_USD_FX_RATE_HISTORY FX33 where BAL.ID_LIABILITY_CURRENCY = FX33.ID_CURRENCY and FX33.ID_DATE <= BAL.id_released_date))Thsi is where I need to incorporate the change -
i need help with my WRT54GS V5.1 wireless router. it cannot connect to the internet and i don't know why. at the moment i have to use an ethernet cable coming from a virgin media modem. information that might be usefull. one of the antennas on the router is broke i am using windows vista on a toshiba laptop. the model is WRT54GS V5.1 thanks for people who help note: i am only 13 so somethings you say i might not understand.
Access Setup page of router .....
Click wireeless tab .... have a note of the wireless settings on that page .... Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2) On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
ip address :- 192.168.1.20
subnet mask :- 255.255.255.0
default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live. -
I need some help with a recordset that selects a series of
vehicle makes that then show models when a make is selected. The
problem is when I select the make it shows a list of models like it
should, some of the make lists have five models and some have ten
or more. What I need help with is how to limit the list to just the
models and not include the "null" values. This makes my drop down
list have large empty spaces at the end of the options listed. The
query is as follows:
SELECT *
FROM saa.vehicle_make
WHERE make = '#FORM.select_make#'
Question # 2:
What can I add to this recordset so that I can search on just
the make alone without the model included. The submit includes both
of the make and model lists so that makes it tough to break up.
Here is the recordset:
SELECT make
FROM saa.vehicle_make
ORDER BY make ASC
Thanks
ShaneSorry I guess I wasn't being clear. The lists work fine with
the present recordsets but I was trying to clean them up just a
little. I am using a table in mysql instead of an array for ease of
maintenance due to the high number of makes and models I am working
with.
For question number one I was looking for sql that allows me
to only show the models in the table for each make no matter how
many are in the row. Currently when I use the existing recordset I
get a long list of blank spaces as it is returning the "null"
fields also. I would like it to just show the models and stop at
the first null field.
For the second question I wanted to be able to submit the
form with just the make listed if someone wanted to see all Hondas
lets say. Not I have to select the make also so it limits the
return.
Thanks for all of the input
Shane
Here is the code I am using for the two dependent select
boxes:
<p align="center">Vehicle Search by
Make/Model</p>
<!--- store the selected make variable after the first
select boxes submits itself --->
<cfif isDefined('form.select_make')>
<cfset page.select_make = form.select_make>
</cfif>
<cfoutput>
<form name="DropDown" method="post">
<!--- query DB for the first drop down list --->
<cfquery name="get_make" datasource="saa">
SELECT make FROM saa.vehicle_make ORDER BY make ASC
</cfquery>
<!--- first drop down list --->
<!--- NOTICE the onChange javascript event in the select
tag, this is what submits the form after the first selection
--->
<p align="center">Model:<select name="select_make"
required="yes" onchange="this.form.submit()">
<option>Select Make</option>
<!--- dynamically populate the first drop down list based
on the get_make query --->
<cfloop query="get_make">
<option value="#make#" <cfif
isDefined('form.select_make')><cfif form.select_make eq
"#make#">selected</cfif></cfif>>#make#</option>
</cfloop>
</select></p>
<!--- if the first selection has been made, display the
second drop down list with the appropriate results --->
<cfif isDefined('form.select_make')>
<!--- query DB for second drop down list, based on the
selected item from the first list --->
<cfquery name="get_model" datasource="saa">
SELECT * FROM saa.vehicle_make WHERE make =
'#FORM.select_make#'
</cfquery>
<!--- second drop down list --->
</cfif>
</form>
</cfoutput>
<cfoutput>
<form action="buyerModelSearchresults.cfm"
method="POST">
<p align="center">Model: <select name="model"
required="yes">
<option>Select Model</option>
<!--- dynamically populate the second drop down list
based on the get_make query --->
<cfloop query="get_model">
<option value="#model1#">#model1#</option>
<option value="#model2#">#model2#</option>
<option value="#model3#">#model3#</option>
<option value="#model4#">#model4#</option>
<option value="#model5#">#model5#</option>
<option value="#model6#">#model6#</option>
<option value="#model7#">#model7#</option>
<option value="#model8#">#model8#</option>
<option value="#model9#">#model9#</option>
<option value="#model10#">#model10#</option>
<option value="#model11#">#model11#</option>
<option value="#model12#">#model12#</option>
<option value="#model13#">#model13#</option>
<option value="#model14#">#model14#</option>
<option value="#model15#">#model15#</option>
<option value="#model16#">#model16#</option>
<option value="#model17#">#model17#</option>
<option value="#model18#">#model18#</option>
<option value="#model19#">#model19#</option>
<option value="#model20#">#model20#</option>
<option value="#model21#">#model21#</option>
<option value="#model22#">#model22#</option>
<option value="#model23#">#model23#</option>
<option value="#model24#">#model24#</option>
<option value="#model25#">#model25#</option>
</cfloop>
</select>
</p>
<p align="center">Search by Make/Model:</p>
<p align="center"><input type="submit" name="Submit"
value="Submit"></p>
</form>
</cfoutput> -
Need help with the session state value items.
I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM
Maybe you are looking for
-
How can i return my delete photo
ok i had backup my iphone on 4 months ago yesterday i did updait my iphone and all my new photo, my APPs, notes and new contact numbers gone. does there any way to return them back? thank you
-
My website is not listed anywhere in Google? Why?
Apologies if this is not appropriate in here. I was wondering why my website is not listed in the top 20 pages of google. I stopped clicking on next page after the results were off topic. I have three keywords I exp4ct people to use and whilst I know
-
Why has my computer slowed after updating with mavericks
i updated to mavericks .since i did this my computer has slowed and i am also getting problems with streaming can i revert back to mountain lion.
-
Can I connect with a 9i Client-Installation to a Linux 8.1.7 or Windows 8.1.5 ?
Hallo, we have never installed a oracle-client before. Is it usefull to install a 9i Windows-Client to access our Oracle 8.1.7 Database on a Linux-Server and the Oracle 8.1.5 Database on the Win-NT server. Do I need more than the 9i-Client for Window
-
Can you choose methods depending on your constructor input?
I'd like to be able to impliment certain method sets, depending on constructor imput. Is there any such thing in java that lets you build a class' methods dynamically...or at least kill/switch/create methods after it's instantiated? thanks for any in