Re: Retention Period, Residence time and Archiving Cycle

Hello Experts,
1.Could someone help me where we maintain the retention period, residence time and archiving cycle for an archiving object.
2.How to schedule a background job for archiving???
Regards
RR

Hello RR,
Residence period: Most of the archiving object residence period is maintained in customizing > Application specific customizing in Archive development tool access through transaction SARA.
Note: There are some archiving object for which you can't maintain residence period however these archiving object residence period should be manually controlled in write variant.
Retention Period: This retention period is mentioned in archive server.
Total retention time = Online Residence period + Offline Retention period.
2. You can schedule archiving jobs by SARA transaction. This transaction will help in scheduling the job background. Or By using Background user id, one can schedule the archiving jobs by background.
-Thanks,
Ajay

Similar Messages

Residence Times for Archiving Object

Hi SAP Archiving Experts,
I am working on an analysis Project.I have finalised the List of Archiving Objects and need the residence times fro each archiving object.
Can any one let me know the source from which i can get the Standard SAP Recommended / the BEST PRACTICE for taking the Residence Time for the Archiving Objects...
Mainly : FI, CO , HR Transaction Area Archiving Objects....
Thanks.Kumar

Hello Kumar,
Residence times for archive objects usually differ from company to company as it depends on the needs of the business (and what they will agree to). Some companies will use a standard residence time across all archive objects to make it easy for everyone to remember. For example, some companies will use Current Year plus 2 as a base for all of the transactional data. The technical archive objects (such as idoc's, application logs, etc.), will have a shorter residence time.
Some of the HR objects will have a 2 year residence time hardcoded into the archive programs which you cannot change.
The book Archiving Your SAP Data from SAP Press gives some examples of common residence times. The second edition of this book is now available but I have not seen that yet and do not know if this version provides additional information.
Hope this helps.
Regards,
Karin Tillotson

My wifi button is frezon and I tried turning my phone off for a period of time and reset my phone but the button is still frezon it want slide over to turn on my wifi. Is there any other way to fix without going to apple to get it fixed?

My wifi button is frezon and I tried turning my phone off for a period of time and reset my phone but the button is still frezon it want slide over to turn on my wifi. Is there any other way to fix without going to apple to get it fixed?

Hey Posada143, You can still try the rice thing, but do not expect much, as roaminggnome has stated. The rice only works if you do it ASAP and leave the iPod off-- do not attempt use, turn on or charge until it is completely dried out. This is probably academic at this point but remember this for the next time: The drying can take 10 days. You put the uncooked rice and iPod in a sealed bag, change the rice every couple of days. This creates a low humidity environment and draws the moisture out of the iPod, but it takes time. Turn your iPod on to earlier, and you run the risk of shorting out, damaging the components inside. Even if done correctly it can spotty. If you do get the iPod to work (and this may require Resetting, Restoring or attempting to place it in DFU recover mode) the first thing you do is make backups, because you never know how long it will continue to work. As for your pictures, if you can't get your iPod to work, you can try data retrieval companies, however; there is no guaranty it will work and it tends to be very expensive. In the future get in the habit of as making backups, because you just don't know. And invest in and use a water tight case. Hope this helps, Good luck. Cheers.

I am trying to export a pdf to word but the document keeps "loading " for a long period of time and won't complete?

I am trying to export a pdf to word but the document keeps "loading " for a long period of time and won't complete?

Hi Jennee,
You're using the Save As > Microsoft Word command in Acrobat (and what version are you using)? At what point does the status bar in the lower-right corner hang up (Pre-processing, Recontructing, and so on)? What type of content is there in the PDF, and how large is it? Are you having Acrobat run OCR on the file as it converts (you can check this by clicking Settings in the Save As dialog box)? Do you have trouble saving other PDF files as Word documents?
A lot of questions, I know. But I need to know a bit more about the document to determine why it's hanging up on export.
Thanks
Sara

Retention Policy between Mailbox and Archive Mailbox level

Dear All
I have some questions about the Retention Policy between Mailbox and Archive Mailbox.
I want to apply different retention tag on different Mailbox level.
In normal case , I would like apply the Retention Policy for Mailbox after 28 days moving to archive Mailbox and over 365 days to be deleted.
And the Archive Mailbox should be liked deleted the mail over 90 or 180 days.
But I found that the archive Mailbox is applied the same Retention Policy as the Mailbox one.
Is it Normal case ? How can I set another retention Policy for My archive Mailbox ?
Best Regards
Vincent Chi

You cannot have a different retention policy for primary and archive mailbox. The policy applied to the primary mailbox also applies
to the archive mailbox.
http://blogs.technet.com/b/vikass_blog/archive/2013/07/04/retention-policy-on-archive-mailbox.aspx
Regards
John

4 albums purchased from iTunes yesterday have songs not playing all the way through. They play for a period of time and skip to the next song. Everytime they are played. Can anyone help?

Some songs I purchased last night are not playing all the way through. Several songs from the 4 albums I purchased play for a period of time then just skip to the next song. The songs that do this, do it everytime they are played at the exact same spot. The songs that are affected skip to the next on iTunes on my PC which is updated to the most current iTunes and my 160gb iPod classic. Everytime they are played at the exact same spot. However on my other device, iPhone 4s all songs play just fine. I have almost 7,000 songs on my iPod and this has never happened before and I have played it awhile since downloading those albums yesterday. This is only happening with the albums purchased yesterday. Can anyone help me figure out what is wrong?

I'm having the same issue with a few songs I just downloaded. It skips randomly in the middle of the song.

Hello. How can I make it so firefox remembers which links I've visited as on the music singles pages for longer periods of time and more links?

I frequently use the singles pages on wikipedia, for example: http://en.wikipedia.org/w/index.php?title=Category:2012_singles&from=D
So I had already clicked on the links some months ago on the 2012 singles pages, but firefox forgot that I had clicked on the links there. How can I make it so it remembers for longer periods of time without causing problems to firefox? Also, I want it to remember what links I've clicked on the 2013 singles pages, because I am also keeping up with that. Can I tell firefox to remember all history for these pages, such as 2012 singles, or 2013 singles specifically? I just want firefox to remember what links I've visited, as in, the songs in the 2012/2013 singles pages, and not forget those, because I have already downloaded those so I want firefox to keep track. What are my options? Please let me know, and I hope you understand the problem I am describing.

My Firefox remembers history from over a year ago, and unless you are using a setting or external tool to clear it, or load huge numbers of pages/download huge numbers of files, Firefox should pretty easily remember links you've accessed in recent months.
To see what Firefox has computed as the number of URLs to remember, you can check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''.hist''' and pause while the list is filtered
(3) Look for '''places.history.expiration.transient_current_max_pages'''
Mine's set to 104858. I don't know how that was determined.

Why does my mac shut off movies after period of time and I have to open itunes again to continue

When watching movies via HomeSharing ITunes will periodically shut off or log out requiring Itunes to be reopened before the movie can be resumed. What is the ix for this?

When you have the problem, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

How to keep that valve open for certain period of time and shut off automatically

Hi everyone,
The objective of the VI is to measure pH and then open acid or base valve based on pH valve. Below is my UNFINISHED VI
My question is: if, for example, the pH is 10, then, the program will open acidic valve for 5 seconds and then shut off automatically. After that, wait for 5 second. this process will go on and on as I use while loop, but I just dont know how to control the valve on for 5sec and off and then wait for 5sec.
Anyone can help me out? Thank you very much
In the picture, please enter those values before running
P.S The VI is based on previously posted vi by someone who made it 1 yrs ago.
Attachments:
project_trial_1_26.vi ‏27 KB
Capture.JPG ‏79 KB

1. The reason the valves close immediately is that the Elapsed Time VI does not cause any wait, it only measures the time. So the valves closed within a small fraction of a second of the time they opened.
2. I modified your VI to wait until the Elapsed Time has ended. See the "wait" state. I probably modified some of your other functionality in the process, but this shows one way you could do the timing.
3. You do not need any Value property nodes. They should never be used if the value can be wired directly.
4. You do not need any sequence structures. Dataflow will determine the order of things occurring.
5. If you use an enum for the state machine (and it is a good way to name and select states), you should make it a type def. Then when you need to change it as I did to add several states, you only need to change the Type Def in one place and the changes propagate through to every place you used the control or constants derived from it.
6. I added a Halt state which will close both valves before stopping the program. When you are controlling a real world process, it is important to consider the start up and shutdown requirements. For example the digital outputs of the USB-6008 default to inputs when the device is first powered up. And, the inputs are pulled high by a 4700 ohm resistor (at least I think I recall that value). Will this open your valves before the program starts running and sets the I/O lines to outputs and forces them low?
The USB-6008 has rather limited drive on the digital lines. You will probably need a buffer between it and the valve coils.
PID and PWM are more complicated than I want to get into here. First, are your valves proportional or on/off? Second, (assuming that they are on/off) how fast can you open and close them without destroying them in the first week? What is their expected lifetime in terms of the number of operations? How fast do you need to be able to change them to keep your pH where you want it? Are these values compatible?
Lynn
Attachments:
pH State.ctl ‏12 KB
project_trial_1_28.2.vi ‏66 KB

How do I stop an event over a period of time and then restart it?

I am at school...
I am really lazy and I have put my school timetable (so that I don't have to look at my planner every time) onto my iPod touch and Macbook Pro. I want to know how to stop and restart the timetable over the holidays.
week 1
week 2
week 1
week 1
week 2
week 1
week 2
week off for holidays
week 1
week 2
week 1
week 2
e.t.c
is there a way to stop the weeks for the break/holidays so that I don't have to rewrite my entire timetable.
PLEASE HELP... it would be greatly appreciated
(p.s. I apologise if there are any grammar/spelling mistakes, but I am in a hurry t)

sorry not
week 1
week 2
week 1
week 1
week 2
week 1
week 2
week off for holidays
week 1
week 2
week 1
week 2
e.t.c
[week 1
week 2
week 1
week 2
week 1
week 2
week 1
week 2
week off for Holidays
week 1
week 2
week 1
week 2
e.t.c ] is what I really meant

Firefox will be working perfectly, but after a period of time, and sometimes after a period of inactivity, the browser just hangs.

Mouse clicks to hyperlinks instigate an error noise, and to recover your internet session, all you can do is re-start the PC - but also re-setting the router seems to clear the problem.
Its not the individual PC, as my netbook which i connect through the same router, has the same problem - nor is it the wireless connections, as when the devices are physically connected, it still occurs!
I have tried upgrading to mozilla v4 beta, no change, and i now taken a retrogade step and gone back to 3.6.13 - no change.

Sorry, I couldn't find any relevant Bugs with regards to that issue.
'''Try the Firefox SafeMode''' to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
When in Safe Mode... 
* The status of plug-ins is not affected.
* Custom preferences are not affected.
* All extensions are disabled.
* The default theme is used, without a persona.
* userChrome.css and userContent.css are ignored.
* The default toolbar layout is used.
* The JIT Javascript compiler is disabled.
* Hardware acceleration is disabled.
* You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes 
Or it might be caused by Hardware Acceleration.
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

TS4268 My iPhone 4 iMessage has stopped working so I switched it to off and switched it back on but stays on activating iMessage for a long period of time and it says it is u successful to log in, how can I get iMessage to work again?

Can some people give me advice on how to fix my situation? My iMessage wasn't working yesterday so I turned it off and back on and it's said it was activating iMessage and now it is not logging in and it comes up with log in unsuccessful and I depend on iMessage back I use it on my iPhone an iPad and it doesn't let me use it on my iPad either.

It is probably still worth while taking it to an Apple store for a possible OOW replacement and let them make the decision, as it was broken before the OP took the back off.
See note below...

Since I updated Firefox to its newest version, regardless of the application I am in, it will work for a period of time, and then it will stop responding. I constantly have to use "force quit" because Firefox does not respond.

It especially happens when I am in the Walden University website.

Hello & welcome, let's see if we can help out here!
See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
http://support.apple.com/kb/PH7029
Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
In the Memory tab of Activity Monitor, are there a lot of Pageouts?

Firefox is crashing randomly, whether i am actively using it or leave it up for a period of time, and there seems to be no consistency as to what is causing it (websites, time until crash, etc).)

using Mac OS X 10.6.7. 3.06 ghz intel core 2 duo, 4 gigs ddr3 ram. Firefox 5.0.
All crash report signatures say js::RegExp::execute. All these crashes have been spread from today to the 27th of June.
There seems to be no consistency as to what websites it crashes on. Sometimes it crashes with several tabs up, sometimes only one. Sometimes on tumblr or twitter, sometimes on livejournal, sometimes elsewhere.

using Mac OS X 10.6.7. 3.06 ghz intel core 2 duo, 4 gigs ddr3 ram. Firefox 5.0.
All crash report signatures say js::RegExp::execute. All these crashes have been spread from today to the 27th of June.
There seems to be no consistency as to what websites it crashes on. Sometimes it crashes with several tabs up, sometimes only one. Sometimes on tumblr or twitter, sometimes on livejournal, sometimes elsewhere.

SXMB_MONI retention period

Hi all,
I configured the retention period for deleting and archiving XML messages in SXMB_ADM.
My retention period for deleting messages is 30 days and the job is scheduled on a weekly basis.
When I go to the message monitoring in the RWB, I can see that all messages older then 30 days are deleted.
However when I go to SXMB_MONI I'm still able to see all messages.
In the persistance layer analysis, I see that the table keeps growing and currently is over 90%.
Does anyone know how I can remove the message out of the SXMB_MONI??
Kind regards,
Steven

Dear Steven,
you might have a look at OSS note 872388 'Troubleshooting Archiving and Deletion in XI 3.0' that provides a comprehensive collection of common issues regarding archiving and deletion. Please walk through section 5 'Troubleshooting Archiving / Deletion of XML messages and history entries in the Integration Server'.
You stated that 5-8% of all messages are deleted through running the deletion job. This indicates that you are not using table switch procedure, ruling out 5-i).
However, 7/30=23% of the messages should be deleted (provided that the message volume is constant over time). Often step 5-k)-2 (adapter status update missing) turns out to be the reason for not deleting XI messages. For the sake of completeness I recommend to have a look at entire section 5.
Best Regards,
Harald Keimer
XI Development Support
SAP AG, Walldorf

Re: Retention Period, Residence time and Archiving Cycle

Similar Messages

Maybe you are looking for