RE: The selectBooleanRadio component's group attribute is null

Hi all,
i am using Jdeveloper 11.1.2.3.0
I have one Read only table in my fragment which contains one Checkbox and one Radio button.
Here i have one requirement that whenever i check the checkbox the radio button will get enabled.
I have done all the things regarding my requirements that is whenever i check the checkbox the radio button is enabled with an error message in log.
The log message is as follows:
The selectBooleanRadio component's group attribute is null. It must be set to a non-null value for the selectBooleanRadio component to function properly. The selectBooleanRadio component is meant to be used with other selectBooleanRadio components with the same group value.
So, Can any one help me to resolve the above issue.
Regards,
Syam

Hi,
I think an error message cannot be more clear than this;
The selectBooleanRadio component's group attribute is null. It must be set to a non-null value for the selectBooleanRadio component to function properly.
selectBooleanRadio component's group attribute ==> the selectBooleanRadio has a "group" property that you need to define a value for
Frank

Similar Messages

IDA ALV - different behavior regarding "drill-down" for grouped attributes after upgrade to ERP 6.0 EHP7 SPS5

Hello Experts,
we have upgraded our Dev System to ERP 6.0 EHP 7 SPS5 (coming from SPS4).
We had implement an example with an IDA ALV. On SPS4 we could make a "drill-down" to the single lines of grouped attributes. Now with SPS5 this is not possible anymore if the grouping is done for more than one attribute.
On the following screenshot it scan be seen that the grouping is done over a Peril attribute and the Currency. I can only make a drill-down via the peril attribute, so that the aggregated values per currency are displayed. ON SPS4 it was possible to make a further drill-down for the currency attribute, so that the different single lines were visible which were part of the grouping/aggregation.
SPS5 behavior:
SPS4 behavior:
I did not found any new settings which steers the behavior. Also I did not found any note which gives a hint that this is a bug.
Does anyone know if the behavior for that was changed and why?
Thx & Best regards,
Florian

Hi Florian,
it is related with the currency field and it seems to be a bug. Please open a ticket to get the problem fixed. The component is BC-WD-CMP-ALV.
Cheers
Jens

FRM-41014: Cannot set attribute of null canvas item CTL_GLOBALS_USERAREA

Hello experts
Has any one encountered the "FRM-41014: Cannot set attribute of null canvas item CTL_GLOBALS_USERAREA" error at any time? What was the fix? I thought setting the environment variable HRUSERAREA="OFF" in the env file would resolve this. But unfortunately, in one of our instances this is set and yet the same error shows up again.
We are upgrading from 10.7 to R12. Linus is the OS. Any inputs? What else do we have to check between the instances where it works and the one that produces the error?
Thanks for responding.
Srikanth

Vasanth
Thanks for your response. The last post in that link seems to suggest that "the error will be shown only by clients, which used [en-gb] scheme in Internet Explorer." But in this case, the library HR_GEN.pll has the SET_ITEM_PROPERTY call which attempts to set the null canvas item's property. The function that helps in making the decision whether or not to make this item property call is done by a function called USERAREAENABLED within the library. This function calls a user exit to determine the value of the env variable $HRUSERAREA. Somehow this returns "ON" inspite of "OFF" value with which this variable is defined in the env file. Could something else be overriding this env file setting?
Srikanth

Invalid column name for the group attribute.

Hi,
Please help, I m struck with this for the past 2 days.
Basically i have big query and with cfoutput and group attribute; i m displaying hte results..
It has 4 levels of grouping.
Also, the grouping column will be different every time the user choose it.so I'm building an array to do it.
Suppose the user choose only 3 columns, I'm manually adding the 4th column so that array has 4 values all the time.
At time, i m getting this error, the column name is invalid.
Your help is highly appreciated.
<cfoutput query="mtburbycust" group="#lstSQLOrderBy[1]#">
          <cfif currentRow EQ 1>
              <cfset rowColor2 = 'CECE9E'/>
         <cfelse>
             <cfif isdefined('Prevcolor')>
                <cfif comparenocase(Prevcolor,rowColor3) EQ 0>
                    <cfset rowColor2 = 'A8E4FF'/>
                <cfelse>
                    <cfset rowColor2 = 'CECE9E'/>
                </cfif>
            </cfif>
          </cfif>
          <cfset Rowcolor = Rowcolor2/>
           <cfset Prevcolor = Rowcolor2/>
         <cfoutput group="#lstSQLOrderBy[2]#">
              <cfoutput group="#lstSQLOrderBy[3]#">
            <cfoutput group="#lstSQLOrderBy[4]#">
               <cfoutput>
</cfoutput>
</cfoutput>
                    </cfoutput>
                </cfoutput>
            </cfoutput>
        </cfoutput>

These tags are somewhat ambiguous, as they have no query attribute:
<cfoutput group="#lstSQLOrderBy[2]#">
<cfoutput group="#lstSQLOrderBy[3]#">
<cfoutput group="#lstSQLOrderBy[4]#">

Using the iplanet-am-static-group-dn attribute

Hi,
I'm trying to construct a user query filter that would return me all the users in a particular static group, in order to integrate with some Synchronisation Services in Plumtree Portal.
I'm thinking of using the iplanet-am-static-group-dn attribute to do so.
However it seems that although I can see this attribute, there are restrictions using this for queries. I could only use this attribute to query when using the root account. When I tried the same query with my application account, it returned no results.
I need advice on a few issues:
1) Are there other better ways to query for the users in a static group? I'm not sure if the iplanet-am-static-group-dn attribute will remain stable in future releases.
2) If there are no better ways to do this, can the right to query using this attribute be delegated? This is a system attribute, so I'm not sure if we can really open this out to be searchable by other users other than root?
Appreciate any advice on this at all, as I'm running on a tight deadline for this solution.
Thanks!

The best way to query for members of a static group is to read the list of uniqueMembers in the group entry itself.
The iplanet-am-static-group-dn attribute is an attribute whose usage is private to Identity Server, and is not guaranteed to be up to date, accurate, or maintained by any other tool that used the directory.

The key columns of the country measure group attribute do not match in either number or data types to the key columns of the source attribute

I have a country dimension which is used in 5 cubes. Now I want to change 'key column' property of the country attribute. Whenever I do this, I get an error as "The key columns of the country measure group attribute do not match in either number or
data types to the key columns of the source attribute". I dont understand what this error is about.
Can someone please help? Thanks in advance.
-Regards,
Raj Patil

sounds like you need to verify your dimensional usage tab to verify the relationships between dim and fact on the measure group.
Hi Talktorajpatil,
As Jon said, you can verify the relationships between dim and fact on the measure group on the dimensional usage tab. Use this section to define how you "join" your measure groups to your dimensions. There may be a Dimension-Measure Group relationship
that is defined using the wrong attributes and you'll need to select the correct attributes to link the Dimensions to the measure groups. Here are some similar thread for your reference.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/74203b66-8a71-4681-8e47-8f99cce87b3d/error-on-the-measure-group-which-do-not-match-the-data-type-of-the-key-column?forum=sqlanalysisservices
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2421058d-fd4a-44b8-8c7c-b0b349bbef2d/measure-group-attribute-key-column-does-not-match-source-attribute?forum=sqlanalysisservices
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

How to populate the time component of a cube?

We have a question regarding how to populate the time component of a cube. Let me explain:
We are using OWB 10gR2. We have created a cube with several dimensions. We are now building the mapping to load the cube. The cube operator has two columns for every dimension (e.g., "customer" and "customer_id" for the "customer" dimension).
We understand that, in this case, "customer_id" stands for the dimension business key, so we create an arrow from the business key in the source table to the "customer_id" column in the cube operator.
So far so good. The mapping works all right, and the cube is loaded correctly.
Now we need to do the same for the time dimension. We have already created the time dimension and we have loaded it. We have also included it in the cube, so now we have two new columns in it: "time_day_code" and "time", both NUMBER data type.
We have the "sale_date" column (DATE data type), in the source system and, of course, now we want to populate the date column in the cube. We suppose that, somehow, we have to translate the "sale_date" field into the numeric column of the surrogate key of the time dimension. How should do we do this? I suppose that OWB must do the translation for us, just as it does for the other dimensions, but how? We have been looking into the manuals, and we have found no explanation on how to go about this.
Any help would be appreciated.
Best regards
Juan Algaba

Hi Juan
You are right this should have been in the manuals, checked and there is only a brief mention (Using a Time Dimension in a Cube Mapping section)
The identifier format should have been documented for each level and will involve creating the formatted attribute for input to the cube operator's time dimension reference attribute.
The time dimension business keys are stored as follows;
Day Level - YYYYMMDD
Month Level - YYYYMM
Week Level - YYYYWW
Quarter - YYYYQ
Year - YYYY
If you have a source that has a SQL date datatype for example and want to construct the key for a cube's time dimension at the day level something like the following expression can be used to construct the time reference from a SQL date...
to_number(to_char( time_key, 'YYYYMMDD'))
The result of this expression can be used as input to the cube's time dimension attribute.
Cheers
David

ISE Not Identifying AD Group Attributes when using Multiple ISE Servers

So we have multiple ISE Servers with differing personas. I was having an issue with our new ISE setup not identifying AD Group Attributes when using them in Authorization rules.
We have 2- 3395 appliances running Admin and Monitoring/Troubleshooting Personas and 2- 3395 appliances running as Policy server personas. We are running v1.1.1.268 with the latest two patches.
I was unable to pull Active Directory Group Attributes in any of my Authorization rules. After Resyncing all the boxes with the Primary Administration box I was able to do this. There is no bug listings for this occurance nor do we have Smartnet to call support for other reasons. I thought this might be useful to someone who is having the same issue and is unable to figure it out with TAC
-CC

Absolutely. All units said in-sync after setting their personas.
Here is our layout:
ISE-ADM-01 Admin-Primary, Monitoring-Secondary
ISE-ADM-02 Admin-Secondary, Monitoring-Primary
ISE-PDP-01 Policy Only
ISE-PDP-02 Policy Only
I synced one at a time starting with ADM-02. After completing the other two boxes. Active Directory Attribs were pulled down when using them in the Ext Group within my Authz rules.
-CC

Adding Images to the List component

Adding Images to the List component while using the FLV
PLayback
All, ( i can send you my source files if it would help)
I'm using the FLV Playback component and loading videos into
it from an external xml file. I also have a list component tied to
the FLV playback that when you click on one of the elements in the
list, it plays that movie.
QUESTION:
My question is how do I add an image to the list component?
Below is the xml file and the actionscript. I've added the image
attribute to the XML file as img="time_square.jpg" and added the
element of the array when calling/creating the list. Did I do this
right?
Any direction would be very much appreciated.

Adding Images to the List component while using the FLV
PLayback
All, ( i can send you my source files if it would help)
I'm using the FLV Playback component and loading videos into
it from an external xml file. I also have a list component tied to
the FLV playback that when you click on one of the elements in the
list, it plays that movie.
QUESTION:
My question is how do I add an image to the list component?
Below is the xml file and the actionscript. I've added the image
attribute to the XML file as img="time_square.jpg" and added the
element of the array when calling/creating the list. Did I do this
right?
Any direction would be very much appreciated.

Need to access a context_node in an another view of the same component

Hi experts,
I need to access a context_node which is not in my view but it exist in an another view of the same component.
The component is ICCMP_BP_DETAIL.
i need the context_node "CUSTOMER" from the view Bupadetail to view Bupacreate. so that i can make those context_node Attributes available in the configuration screen.
regards,
chella.

Hi Chella,
You can access the context node from other view using the custom controler or getting a context node from view that you are and use the method get_parent(to get predecessor objet) or get_related_entity(to get sucessor object).
I think the second way is easier.
Use transaction GENIL_MODEL_BROWSER and GENIL_BOL_BROWSER to know in wich object you are and where you have to go!
Best regards,
Caíque Escaler

Custom component with valuechangelistener attribute

I am playing around with JSF and want to make a custom UIcomponent which extends UIinput. I want this component to have the valueChangeListener as an attirbute so that I can:
<my:customComponent valueChangeListener="#{myBackingBean}">
Now simple attributes aren't a problem and are explained in every tutorial you find and then some. I haven't found any tutorial that even touches this subject. If anyone can point me in the right direction I would be grateful.
What I have somewhat figured out is the tld entry:
<attribute>
<name>valueChangeListener</name>
<required>false</required>
<deferred-method>
<method-signature>
void valueChange(javax.faces.event.ValueChangeEvent)
</method-signature>
</deferred-method>
</attribute>
I am assuming that you have to change the setProperties so that
if (valueChangeListener != null){
component.setMethodExpression(...)?
except that my component deosn't seem to know this but only setmethodbinding, even though I should be using jsf 1.2
Now obviously I am missing half the story, if not more. Which is the problem of course.

In the setProperties method of the tag handler, you convert the MethodExpression
object to an appropriate listener object and add it to the component:
public void setProperties(UIComponent component) {
     super.setProperties(component);
     if (valueChangeListener != null)
          ((EditableValueHolder) component).addValueChangeListener(
          new MethodExpressionValueChangeListener(valueChangeListener));
}** Borrowed from 'Core JavaServer Faces' book. 2nd edition. chapter 9

A question about the Tree Component

I have try to use the tree component i a flash page, and
it´s going allright until I´ll want to link the content
to a page... WHY??
I have tried a lot of different codes here are those I tried:
<tree>
<folder label="Mine own">
<link label="My page" url="
http://www.mickesei.se" />
</folder>
</tree>
Nr2:
<tree>
<folder label="Mine own">
<link label="My page" link="
http://www.mickesei.se" />
</folder>
</tree>
nr3:
<tree>
<folder label="Mine own">
<link label="My page" href="
http://www.mickesei.se" />
</folder>
</tree>
nr4:
<tree>
<folder label="Mine own">
<link label="My page" get URL="
http://www.mickesei.se" />
</folder>
</tree>
But nothing seems to work, when I go mouse over it still a
arrow should it?
HELP ME PLEASE!!! Micke

Thanx Jeanne,
You brought me on a idea with the UIX Developer's Guide and EXPANDABLE_EXPANDED value.
I couldn't figure out how the expand property was filled, because it wasn't done in the ADF BC ViewObject. We have a Utility class that creates a DataObject from the ViewObject Data and here the expand property was set.
Now it was easy to build a ExpandAll option. It is possible to access the HttpServletRequest object were the DataObject is created. By setting a attribute in the request I could react on that and give the expand property indeed the value EXPANDABLE_EXPANDED.
Dennis

How do you change the Tree Component Icons?

Hi,
I have been trying to get to grips with the tree component. I
want to
customise it so that I can have a different icon for each
different link.
E.g. a QT logo for a video etc. If no valuse is found for the
'icon'
attribute it will just display the default.
Within my XML file I have created a new attribute for each
link called
'icon' and has a value of 'movie.gif' or something similar.
In my flash file, I have created the following code:
theTree.iconFunction = function (node:XMLNode) {
var iconNode:String = item.attributes.icon;
if (iconNode != undefined) {
return iconNode;
However, it does not seem to work. My knowledge of
ActionScript is pretty
poor so I assume I have made a mistake in there somewhere.
Can anyone help
me with this?
Thanks!

Check out the Component Reference... you change the icon for
a single node, as far as I know there's no automated process beyond
that. So assuming your tree component instance is named "theTree"
you might do this to change the icon of the first node:
theTree.dataProvider = yourXML; // make sure you don't try to
change the icon before you load data into the tree
var theNode = theTree.getTreeNodeAt(0); // the first node in
your tree
theTree.setIcon(theNode,'myIcon'); // set the icon
Where "myIcon" is a MovieClip you have in your library that
you have set the "linkage identifier" as "myIcon".
That iconFunction doesn't make a whole lot of sense to me,
because first of all I don't know why it would be attached to
theTree, and second it's referring to "item" which is not defined,
and third its taking the parameter "node" and not doing anything
with it. But perhaps there is some cool way to make a single
function which handles icons for your entire tree automatically,
that would certainly be nice.
However, like I said, as far as I know that function will do
nothing without calling tree.setIcon() in some way. I just made a
function which might do what you want -- it recursively loops
through an entire tree and sets it's icon based on the XML
attribute "icon":
function setAllIcons(branch){
for(var i in branch.childNodes){
var node = branch.getTreeNodeAt(i);
theTree.setIcon(node,node.attributes['icon']);
if(node.hasChildNodes){
setAllIcons(node);
So basically, you run setAllIcons(theTree.dataProvider) after
you have loaded and applied the XML.

Getting the current Mode - Basic or Advanced in the Query Component

Hi,
I am using the query component for search with programmatic view objects and have modified the processQuery() method according to my requirement. I am getting required attribute names , values and operators with the help of queryEvent.getDescriptor(). But still am not able to get the cuurent mode whether it is in Basic Mode or Advance Mode. Can anyone please provide a solution to this. Thanks in advance.
Vivek

with the help of queryEvent.getDescriptor()queryDescriptor.getUIHints().get(QueryDescriptor.UIHINT_MODE)
The above will return either:
QueryDescriptor.QueryMode.BASIC or
QueryDescriptor.QueryMode.ADVANCED
Ref:
http://download.oracle.com/docs/cd/E15051_01/apirefs.1111/e10684/oracle/adf/view/rich/model/QueryDescriptor.QueryMode.html
http://download.oracle.com/docs/cd/E15051_01/apirefs.1111/e10684/oracle/adf/view/rich/model/QueryDescriptor.html

RE: The selectBooleanRadio component's group attribute is null

Similar Messages

Maybe you are looking for